How to Integrate Oracle Projects(EBS-R12) with Primavera P6

Dear All,
As i have a requirement that i need to *"Integrate Oracle Projects(EBS-R12) with Primavera P6 for Oracle Projects Accounting ( Costing & Billing ) using Application Integration Architecture(AIA-PIP)"*.
So kindly suggest me to do the same.
Thanks in advance for your valuable suggestion.
Regards,
Saravanaa

Vishal, I would recommend that you post this question on the CRM On Demand Integration Development forum.

Similar Messages

  • How to integrate Oracle Policy Automation (OPA) with E-Business Suite

    Hi All,
    we would like to know, how to integrate OPA to E-Business Suite Modules. we would like to integrate OPA to one of our Public Sector Client.
    Any Pointers / links / documentation, please mail to me on my id: [email protected] or you can call me on my mobile: +91 99897 18865
    Regards
    Chandra

    My understanding is that the standard EBS web service framework can be used to make calls to the OPA Determinations Server, and this is fairly straightforward.
    If anyone has direct experience in this area, it would be good to hear from them.
    Davin.

  • How to integrate oracle crm on demand with R12?

    Hi,
    i wount to implement oracle crm on demand in my company and want to intigrate it with oracle r12. Can any budy guide me how can i do the same? as i am new in this field
    Thanks,
    Vishal Joshi

    Vishal, I would recommend that you post this question on the CRM On Demand Integration Development forum.

  • How to Integrate Oracle Access Manager 11g with Siebel Call Center 7.8

    I need to change the DB authentication to SSO for Siebel Call Center 7.8. I just found a document about integrationg OAM 10g with Siebel 7 (http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/b25347/siebel.htm#Siebel). However, because it's mandatory to use OAM 11g, I don't know whether this doc is suitable for Siebel 7.8. In addition, is it the right way to configure Siebel SSO? I know, in this way, I need to install WebGate. Please give me some expertise. Thanks.

    This should work as long as your web server and operating system support 11g. There may be some differences in how to set up OAM and the WebGate in 11g versus 10g (that is not my area of expertise), but from the Siebel side the integration is the same. You would pass in the user's Siebel ID (pulled from the LDAP directory) as an HTTP header. Then you just need to tweak a few of the parameters in Siebel:
    For the Security Adapter Profile (LDAPSecAdpt most likely) you are using, set:
    SingleSignOn = True
    TrustToken = HELLO (or whatever value you choose)
    In eapps.cfg or eapps_sia.cfg in the virtual directory section for the specific application object manager (e.g. [sales_enu]) set:
    UserSpec = SIEBEL_USER (or whatever HTTP header name you set up in OAM)
    UserSpecSource = HEADER
    SingleSignOn = TRUE
    TrustToken = HELLO (or whatever value you selected for the Security Adapter profile TrustToken parameter)
    ProtectedVirtualDirectory = /sales_enu
    The protected virtual directory will normally be the same as the virtual directory (in this example /sales_enu) unless you are using customer facing applications with anonymous browsing capabilities (for example a catalog that goes to a shopping cart at some point in the process).
    Also in the [SWE] section of the eapps.cfg file the IntegratedDomainAuth parameter should be set to False.
    Hope this information is helpful.
    Best regards,
    Stevan

  • Integrate Oracle EBS R12 with third party Fax

    Hi,
    We are trying to integrate Oracle EBS R12 with third party Fax. Can anyone share any documents stating the high level solution approach for this kind of integrations?
    Please send me any docs on --> [email protected]
    Thanks
    Suman

    Can you pl elaborate on why you need 3rd party fax ? Can you not use XML Publisher ? See Chapter 7 of the XML Publisher Admin Guide http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120xdoig.pdf
    HTH
    Srini

  • How to integrate Microsoft project to Oracle Project Management?

    Dear All,
    How to integrate Microsoft project to Oracle Project Management?
    I tried to find Oracle Project button in Microsoft Project to send Project plan to oracle projects. But I didn’t not found any button like Oracle project to upload.
    Can anyone please let me know what the prerequisites to integrate and how to import the same data in oracle Project Management Module from Microsoft Project?

    Hi,
    Please see "Oracle Project Management User Guide", Chapter 5.
    Applications Releases 11i and 12
    http://www.oracle.com/technology/documentation/applications.html
    The following documents should be also helpful.
    Note: 277096.1 - **FAQ Integration with Microsoft Projects**
    Note: 236522.1 - Oracle Project Management Release & Installation Notes
    Note: 236585.1 - Oracle Project Management Documentation
    Note: 804746.1 - Is It Possible To Use Microsoft Projects Integration Without Oracle Project Management?
    Regards,
    Hussein

  • How to integrate Oracle Ebs to FDQM to load the data to Essbase

    Hi Experts,
    I need a document regarding how to integrate Oracle EBS to FDQM.I am taking target as Essbase.I know how to integrate to HFM and loading the data to HFM.So please share me the document like How to get source file from E-Buisiness suite to load into Essbase.Pleaae share with an example
    Thanks in advance

    The following link:
    http://docs.oracle.com/cd/E24674_01/epm.1112/fdm_adapter_readmes/es_g4_h_target_adapter_readme.html
    You need to configure the target dimensions of Essbase within the Essbase adapter of FDQM.
    For source integration of EBS, you have two options:
    1. Use Oracle ERPI (ERP Integrator)
    2. Make a custom data pump import script in FDQM to retrieve data from EBS database

  • How to integrate Oracle Right Now with our application Calling Button and Chat Button  Application is on WebCenter  Sites

    How to integrate Oracle Right Now with our application Calling Button and Chat Button. Application is on WebCenter  Sites

    Thanks handar. As per your instructions I have tried OAM authorization policy and its working fine. But we also wants to check the same with OES also. Currently I have configure weblogic SM and created domain. In same domain I have deployed my application also. I have created application, resources and authorization policy to authorize /myfolder/index.jsp if user has some specific role. Now if I try to access my web application using http://host:8001/CONTEXT/myfolder/index.jsp, it doesn't check if user is authorized or not. I guess my application is not related to the resource I have created. Please help me with this. Also, let me know if we can retirive logged in user from session and use for authorization.

  • How to Integrate Oracle Apps with BPEL

    hi
    How to Integrate Oracle Apps with Fusion Middleware(BPEL) ?
    Please Provide me steps:
    Regards,
    Khushal

    hi,
    There is an adapter thats being provided with the standard adapter set with SOA installation . There are several ways of integrating with Oracle Apps . The adapter has all the options listed out.
    Regards,
    Ajay

  • How to integrate oracle webcenter with oracle webcenter Sites?

    How to integrate oracle webcenter with oracle webcenter Sites?

    This very much depends on what you mean by the first "oracle webcenter" and what kind of integration you are looking for.
    Oracle WebCenter contains three main product lines:
    - Oracle WebCenter Portal,
    - Oracle WebCenter Sites,
    - and Oracle WebCenter Content.
    Since the newest version 11.1.1.8 it is possible to store Sites' assets in WebCenter Content.
    WebCenter Portal, where the name WebCenter originated from, is another front-end technology, so it would rather co-exist next to Sites than integrate with them. See this thread WebCenter Portal and WebCenter Sites Integration for more details.

  • How to Integrate Oracle Ebusiness suite to FDQM to load into Essbase

    Hi Experts,
    I need a document regarding how to integrate Oracle EBS to FDQM.I am taking target as Essbase.I know how to integrate to HFM and loading the data to HFM.So please share me the document like How to get source file from E-Buisiness suite to load into Essbase.Pleaae share with an example
    Thanks in advance

    Hi;
    How to install Oracle Ebusiness suite R12.1.3 on RAC environmentsCheck below thread's mention note advice
    Rrac-EBS wiht asm
    Re: RAC for EBS R12
    rac-r12-ebs-asm
    Re: EBS R12 with RAC and ASM on AIX 5.3
    RAC-R11-R12
    Upgrade the 11.5.10.2 Instance with 10gRAC setup
    How to implement shared appl top Shared appltop in R12
    Shared appltop in R12
    How to configure https for Oracle Ebusiness Suite R12.1.3Enabling SSL in Release 12 [ID 376700.1]
    Enabling SSL with Oracle Application Server 10g and the E-Business Suite [ID 340178.1]
    Also see*Steven Chan's blog entery*:
    http://blogs.oracle.com/stevenChan/2009/08/ssl_advanced_configuration_wizard_ebs12.html
    Regard
    Helios

  • Difference between Oracle Projects (EBS) and Oracle Primavera

    What is the difference between Oracle Projects (EBS) or Oracle Primavera? what is Oracle’s direction on Project portfolio management solution.
    TIA

    BluShadow wrote:
    3360 wrote:
    Yes it is. The Oracle database wasn't initially designed to be ANSI compliant. As you correctly state the ANSI standards weren't around when it was initially designed, so the statement is perfectly correct. ;)Ok, in one sense it may be correct but it is a completely misleading statement. Not sure why you think it's misleading.Because there was no ANSI standard, so making it sound like a design choice The Oracle database wasn't initially designed to be ANSI compliant. would suggest to most readers that there was a standard to be compliant to.
    Like saying Ford originally did not design their cars to incorporate safety features such as ABS, seat belts and air bags.
    The OP asked "why oracle is having different syntaxes for joins than ANSI syntaxes ?" and the answer is that Oracle wasn't initially designed with ANSI compliance, so it has it's old non-ANSI syntax,As shown above, the old syntax was ANSI compliant at the time and to call it non-ANSI is either incorrect or misleading dependent on your point of view.
    and since ANSI syntax became the standard it now supports that. And since ANSI switched to a new standard, Oracle had to implement the new standard as well as the previous ANSI standard would be more accurate in my opinion.
    Nothing misleading as far as I'm aware in that.I find the whole discussion about ANSI and Oracle's supposed non-compliance, reads like it was Oracle's choice to deviate from the standards, when it was ANSI's bullheaded decisions to pointlessly change standards that left Oracle and other vendors out of compliance, and that was a decision made solely by ANSI.
    This is probably the reason ANSI no longer produces SQL standards, the endless syntax fiddling would eventually have made forward left under outer joins a reality.
    {message:id=1785128}

  • How to integrate Jboss seam frame work with Jdeveloper 11

    hi
    Really i don't know how to integrate Jboss seam frame work with JDeveloper, actually my current project implementation was started with Netbeans, but i am planning to suggest my customer , use JDeveloper.
    please provide the solution are any information, how to integrate the JBoss Seam frame work.
    Thanks
    Lakshmi

    Hi,
    JDeveloper 11 does not yet provide documentation about the integration with Seam (not only the technology but also the documentation is in early preview stage). However, this is an interesting question you ask and I'll follow up to see if we can get some document out in short term.
    Frank

  • How to Integrate Oracle XE [ APEX ] & Adobe Flex

    How to Integrate Oracle XE [ APEX ] & Adobe Flex
    Just recently, I upload a quick screencast where shows how to integrate Ruby on Rails applications and Adobe Flex using http services <br>
    <param name=”movie” value=”http://www.youtube.com/v/IdM_rgDaVM0&rel=1”></param><param name=”wmode” value=”transparent”></param>
    This should be possible with Oracle APEX. I wonder if somebody have some ideas of a quick and easy export to generate the XML accessors for the Oracle XE instead of a htp.p PL/SQL Procedure ???
    The frontend with Flex will be the same, I just like to be able to automatically generate the XML version of the results, perhaps will be necesary some PL/SQL... applied to the end result of the query.
    Best Regards Dino.

    If it's raw XML output from APEX, how about a RSS feed as an example?
    C.

  • How to integrate AT&T U-Verse with existing Time Capsule wireless network

    I would like to switch from Comcast HDTV+Earthlink internet service to AT&T U-Verse, but it’s not clear to me how to integrate the AT&T system with our existing Time Capsule/wireless set-up. The TV (with cabled DVR) is in our family room; the Time Capsule, printer & iMac are in the study. Do I need to move the Time Capsule - so it is directly connected to the AT&T ‘gateway’ box via ethernet cable - or - can I just attach an Airport Express module to the modem/router box and leave the Time Capsule where it is? (I plan to turn off the wireless function on the AT&T device.)

    No, we have a mix of 802.11g & 802.11n devises, so it looks like I will need to use the WDS option
    Yes, this is your only option here.
    can I 'create' a (Apple) WDS network rather than 'participate' in a (2Wire) network?
    Maybe I am mistaken, but I sense that you may be thinking that you can somehow combine the 2 Wire and Apple networks together in a WDS setup. This is not possible since they are not compatible for this purpose.
    You will configure the main Apple router to "participate in a WDS network". There is no other way to set it up if you want to use WDS. It will be configured as the "main base station" in the setup.
    You could leave the 2Wire network "as is" and use it for guests or some other purpose. There is some concern though about having different networks in close proximity due to likely interference effects between the devices.
    (2) Can I use an Airport Express device in 'relay' mode and also use it to stream AirTunes to the stereo?
    Yes
    I'm also wondering if the 2Wire device & the TC should have the same password and security (WPA2), so the NetQuakes seismograph in the garage can 'see' the internet through both devices. But perhaps a question for another day...
    OK to use the same WPA2 Security, but having the same password for two distinct networks may cause some confusion.

Maybe you are looking for