Need to know the difference between SRM workflow and Normal Ecc 6.0 Worflow

Hi All,
I have worked on Ecc 6.0 worflow, just wanted to know how is SRM workflow going to be different than the ECC6.0 worflows.
Incase if someone can suggest some links for tutorials for SRM workflow basics.
Thanks to all in advance.
Anu.

Hi
In addition to Masa
For every business object we do have one or more  work flow templates are available.
In SRM , you can approve via web browsers . very user friendly screens
br
muthu

Similar Messages

  • I need to know the difference between planned SKF and Actual SKF from business view and when I can use one of them ?

    I need just to know the difference between plan SKF and Actual SKF in business example and when I use one of them.
    thanks

    Hi Salaam,
    Statistical Key Figure (SKF) is a base to allocate the cost between cost centers. Usually, common cost centers cost should allocate to respective department cost centers on monthly basis.
    Some of SKFs are: Calculating floor rent on SFT, Telephone charges on No. of units, and employees head count is with "Each" in SAP.
    Apart from Ajay's reply, you can consider the Canteen exp in an organization. Assume Admin, Fin and Mfg departments are getting food services from Canteen. Here, total monthly cost of Canteen exp should be allocated to respective departments. Here, we use SKF as total head count of each department and distribute the cost.
    Planned SKF is what you planned on the beginning of a period. (Assume head count was planned as 30 in the month beginning)
    Actual SKF is what exactly you consumed over the period. (Actual employees provided canteen services during the month is 25)
    BR, Srinivas Salpala

  • I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

    I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

    Hello Karen,
    If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders.  Look especially for the AVCHD logo and specific mention of AVCHD in the specs.  Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
    Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
    Most everything you are going to find on the market today is HD, which stands for "high-def".
    Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

  • I want to know the difference between Days column and Day1 Column

    Hi All,
    I used this query:
    SELECT to_char(return_date_time,'dd/mon/yyyy hh24:mi:ss') Test,
    DECODE ('I', 'I', DECODE (1, NULL, NULL, 0, NULL, SYSDATE + 1)) Days,
    DECODE ('I', 'I', SYSDATE + 1) Day1
    FROM fm_curr_locn
    WHERE patient_id = 'DU00002765'
    output: 
    Test
    Days
    Day1
    26/oct/2013 00:00:00
    26-OCT-13
    10/26/2013 3:06:59 PM
    I want to know the difference between Days column and Day1 column and why the days column didnt show the time
    Please anyone help.....
    Regards
    Shagar M

    Pleiadian wrote:
    It is the decode statement that is doing this.
    The format of decode is:
    decode(expression, search1, result1, search2, result2, searchn, resultn, default)
    All result fields must be of the same datatype and will be of the datatype of the first result (result1 in this example)
    In your example (the decode for the field Days) the first result is a NULL. I suspect (gurus? anyone?) that Oracle will use the varchar2 overload of the decode statement, and the date field will be converted to varchar2 using your NLS_DATE_FORMAT settings.
    In the second decode statment (Day1) the first result is of datatype date, so the result of the decode statement will be a date field (and will be parsed as such by your sql development tool)
    I agree, as NULL is the first result returned the datatype is undetermined, so Oracle is picking VARCHAR2 over others, and causing an implicit datatype conversion on the resultant date value, whereas the other which is returned as a date will use the local settings of the client tool being used.
    I can replicate the 'issue' in Toad, and it's rectified if we cast the first returned value of the decode statement...
    SELECT DECODE ('I', 'I', DECODE (1, NULL, CAST(NULL AS DATE), 0, NULL, SYSDATE + 1)) Days,
           DECODE ('I', 'I', SYSDATE + 1) Day1
    FROM dual

  • What is the difference between document class and normal class

    Hi,
    Please let me know what is the difference between document class and normal class.
    And I have no idea which class should call as document class or call as an object.
    Thanks
    -Actionscript Developer

    the document class is invoked immediately when your swf opens.  the document class must subclass the sprite or movieclip class.
    all other classes are invoked explicitly with code and need not subclass any other class.

  • The difference between FIELD-SYMBOL and normal DATA TYPE

    Dear experts,
    Please see the example below, both are output the same result.
    DATA: EXTERNAL_RECORD(4000),
          POSITION TYPE I,
          LENGTH TYPE N,
          ENTRY TYPE STRING.
    EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
    DO.
      LENGTH = EXTERNAL_RECORD+POSITION(4).
      IF LENGTH = 0.
        EXIT.
      ENDIF.
      ADD 4 TO POSITION.
      MOVE EXTERNAL_RECORD+POSITION(LENGTH) TO ENTRY.
      WRITE ENTRY.
      ADD LENGTH TO POSITION.
      IF POSITION >= 4000.
        EXIT.
      ENDIF.
    ENDDO.
    --OR It can be written as--
    DATA: EXTERNAL_RECORD(4000),
          POSITION TYPE I,
          LENGTH TYPE N.
    FIELD-SYMBOLS <ENTRY>.
    EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
    DO.
      LENGTH = EXTERNAL_RECORD+POSITION(4).
      IF LENGTH = 0.
        EXIT.
      ENDIF.
      ADD 4 TO POSITION.
      ASSIGN EXTERNAL_RECORD+POSITION(LENGTH) TO <ENTRY>.
      WRITE <ENTRY>.
      ADD LENGTH TO POSITION.
      IF POSITION >= 4000.
        EXIT.
      ENDIF.
    ENDDO.
    Is there any special circumstances we need to use FIELD-SYMBOL?
    Why is FIELD-SYMBOL is introduce in the first place?
    Kindly advice with example.
    Thanks in advance for those who can help me on this.

    HI,
    You can use field symbols to make the program more dynamic. In this example the name of a table control is substituted by a field symbol. Thus you cal call the form with any internal table, using the name of the table control as a parameter.
    Example
    form insert_row
    using p_tc_name.
    field-symbols <tc> type cxtab_control. "Table control
    assign (p_tc_name) to <tc>.
    insert 100 lines in table control
    <tc>-lines = 100.
    Field symbols allow you to:
    **     Assign an alias to a data object(for example, a shortened
            name for data objects structured through several hierarchies
            - <fs>-f instead of rec1-rec2-rec3-f)
    **     Set the offset and length for a string variably at runtime
    **     Set a pointer to a data object that you determine at runtime (dynamic ASSIGN)
    **     Adopt or change the type of a field dynamically at runtime
    **     Access components of a structure
    **     (from Release 4.5A) Point to lines of an internal table
            (process internal tables without a separate work area)
    Field symbols in ABAP are similar to pointers in other programming
    languages. However, pointers (as used in PASCAL or C) differ from ABAP
    field symbols in their reference syntax.
    The statement ASSIGN f to <fs> assigns the field f to field
    symbol <fs>. The field symbol <fs> then "points" to the
    contents of field f at runtime. This means that all changes to the
    contents of f are visible in <fs> and vice versa. You declare
    the field symbol <fs> using the statement FIELD-SYMBOLS: <fs>.
    Reference syntax
    Programming languages such as PASCAL and C use a dereferencing symbol
    to indicate the difference between a reference and the object to which
    it refers; so PASCAL would use p^ for a pointer instead of p, C would
    use *p instead of p. ABAP does not have any such dereferencing symbol.
    **     In PASCAL or C, if you assign a pointer p1 to a pointer p2,
    you force p1 to point to the object to which p2 refers (reference semantics).
    **     In ABAP, if you assign a field symbol <fs1> to a field
    symbol <fs2>, <fs1> takes the value of the data object to
    which <fs2> refers (value semantics).
    **     Field symbols in ABAP are always dereferenced, that is,
    they always access the referenced data object. If you want to
    change the reference yourself in ABAP, you can use the ASSIGN statement
    to assign field symbol <fs1> to field symbol <fs2>.
    Using field symbols
    You declare field symbols using the FIELD-SYMBOLS statement.
    They may be declared either with or without a specific type.
    At runtime you assign a field to the field symbol using the ASSIGN
    statement. All of the operations on the field symbol act on the field
    assigned to it.
    When you assign a field to an untyped field symbol, the field symbol
    adopts the type of the field. If, on the other hand, you want to assign
    a field to a typed field symbol, the type of the field and that of the
    field symbol must be compatible.
    A field symbol can point to any data object and from Release 4.5A,
    they can also point to lines of internal tables.
    The brackets (<>) are part of the syntax.
    Use the expression <fs> IS ASSIGNED to find out whether the field
    symbol <fs> is assigned to a field.
    The statement UNASSIGN <fs> sets the field symbol <fs> so
    that it points to nothing. The logical expression <fs>
    IS ASSIGNED is then false. The corresponding negative expression
    is IF NOT <fs> IS ASSIGNED.
    An unassigned field symbol <fs> behaves as a constant with
    type C(1) and initial value SPACE.
    MOVE <fs>
    TO dest     Transfers the initial value SPACE to the variable dest
    MOVE 'A' to <fs>     
    Not possible, since <fs> is a constant
    (runtime error).
    To lift a type restriction, use the CASTING addition in the
    ASSIGN statement. The data object is then interpreted as though
    it had the data type of the field symbol. You can also do this
    with untyped field symbols using the CASTING TYPE <type> addition.
    The danger with pointers is that they may point to invalid areas.
    This danger is not so acute in ABAP, because the language does not
    use address arithmetic (for example, in other languages, pointer p
    might point to address 1024. After the statement p = p + 10, it would
    point to the address 1034). However, the danger does still exist, and
    memory protection violations lead to runtime errors.
    A pointer in ABAP may not point beyond a segment boundary. ABAP does
    not have one large address space, but rather a set of segments.
    Each of the following has its own segment:
    *     All global data
    *     All local data
    *     Each table work area (TABLES)
    *     Each COMMON PART
    You should only let field symbols move within an elementary field or
    structure where ABAP allows you to assign both within the global data
    and beyond a field boundary.
    Rgds
    Umakanth

  • I am wanting to buy and Ipad.. but I would like to know the difference between having wifi and a simcard..if someone could explain this to me.. and the benefits of both I would appreciate it.

    Good Morning:
    I have been looking at the Ipads for a while now.  I have some concerns though.  First, I am NOT a techy of any kind!!  So my question is;  What is the difference between wifi and a simcard(?)   What I understand about wifi is...if you are in an area with free internet.. you can excess it.  If not, then you can't.  What is a simcard?  Is this what you would use like a turbo stick..such as internet on the go... or is this a data plan for the Ipad, like I have for my phone?  If so, I take it that it would mean a monthly bill of what or however I set it up...  Please be kind with your responces.. I am a older person who wants a new gadget.   
    Thank you

    Hi, Sarah,
    You don't really compare a SIM card directly with WiFi. What a SIM card indicates is that a device is designed to connect to cellphone service, in the case of an iPad a data-only service for connection to the Internet. The SIM card works with a technology called GSM (don't worry about what that means); the SIM card is just how the iPad is identified to the cell carrier (in the US, that would be AT&T).
    Your choices of connecting an iPad to the Internet are therefore:
    WiFi - wireless network connection which uses a device referred to as a "hotspot" or "access point" (and sometimes a "wireless router") with an Internet service provided by some other company. You may have this at home, with your own WiFi router and Internet service, or it may be found by some other location, such as a coffee shop. Cost of WiFi at home would only be the cost of the router and the fee you pay to your Internet provider. Other locations may or many not involve a cost. The advantage of a WiFi connection is speed (compared to a cellular data service) and cost (no monthly fee other than your Internet provider).  The disadvantage is that you have to be in range of a WiFi service; that range is usually on the order of 100 feet or so.
    Cellular - this is a service provide by a cellphone carrier. This allows you to have your iPad connected to the Internet wherever the carrier offers service, which may be in buildings, parks, while driving, etc. just as with a cellphone. You pay a monthly fee to the cell carrier for this service. The advange is of course that it's available in many places. The primary disadvantages are the monthly cost and slower speed in the connection to the Internet.
    You can have both with an iPad if you purchase your iPad with both systems included; iPads are sold WiFi-only or WiFi+3G ("3G" refers to being capable of connecting to a cell network) You are not obligated to sign up with a cell carrier if you buy the iPad with that technology; most carriers allow you to sign up month-by-month, and in some countries the carrier has a pay-as-you-go service. If you tell us what country you're in, someone can tell you more about the available cell plans, if you're interested.
    I hope this helps. Feel free to post back if you need further clarification or have additional questions.
    Regards.

  • What is the difference between CE Portal and normal Portal

    Can someone tell me the difference between CE Portal & Normal Portal. I mean, I keep hearing that SAP EP 7.2 is CE portal whereas SAP EP 7.3 is not CE portal.
    Can I assume that CE (Composite environment) is a failure model so SAP switched back to Non-CE environment ? Your inputs please.

    Hello,
    SAP NetWeaver Composition Environment 7.1 and 7.2 have been introduced as a lean "side-car" approach to complement the SAP NetWeaver standard release. Main reason was to provide composition tools and services based on a enhanced Java technology stack (back the time).
    The official successor of SAP NetWeaver 7.0 (or any of the enhancements packages) has been SAP NetWeaver 7.3 (where we brougth various tools together back into one SAP NetWeaver codeline.) Nowadays we recommend the latest release: SAP NetWeaver 7.4 including the Enterprise Portal 7.4.
    Customers & Partners who did not want to install the full SAP NetWeaver Java stack had the chance to only go with the Composition Environment - that contained selected portal core services. These are mainly used for application integration / launching scenarios and not supportin full enterprise portal (intranet / extranet) scenarios - that's why there is no KM included.
    Hope this helps to get a better understanding.
    Regards,
    Thomas

  • Needs to know the difference between 4500s and 6500s

    i would like to referesh my company's GO and with 7613 router and has 2 6509E with sup720 core. it has a 4 MDF 6509E with sup720 also. now about IDF's i am confuse what i have to use. 4500s or 6500s. the main thinking is we would like to upgrade our desktop from 100M to 1G. so i have to think about the uplink between IDF and MDF.what is suitable for me in this case.
    thanks.

    This is a very broad question which can't be covered in a single post.
    My first suggestion is getting to know everything about each model.
    Start by going to http://www.cisco.com/en/US/products/hw/switches/index.html
    and click on each product family.
    Second suggestion is giving your Cisco Sales rep a call, he will come onsite and show you how you can maximize your network environment and what product matches your criteria better.

  • Does anybody know the difference between extractors 0FI_GL_4 and 0FI_GL_10?

    BW experts:  I have to extract GL data into BW, and I was assuming I would use 0FI_GL_4 datasource.  However, I began looking around and see now 0FI_GL_10.  I am not knowledgable on the finance side at all in SAP, so I don't know which extractor makes sense to use.  Does anybody know what the difference is between these two extractors.
    Kind Regards,
    Chris

    these two datasources are different from each other.
    If you are still using the old GL - you need to use 0FI_GL_4
    If you are still using the NEW GL - you need to use 0FI_GL_10
    And one more thing to keep in mind id 4 extractor is meant for line items and 10 is for totals. And there is no std line item DS for NEW GL. You need to create ur own.

  • What is the difference between Bex transportation and Normal Transportation

    Hi experts,
    I have doubt with Transporting queries , in this I've used the normal transport (truck icon) rather than Bex Transport. I would like to know which is the preferable one and what is the main difference between them.
    Suggest me if I can go for normal Transportation rather than Ibex transport, as I've  not tried Bex transportation before.
    Give me some valuable inputs please.......
    Regards
    Kumar

    Hi Kumar,
    We have a Bex transport because we may make changes in the query very often and these changes will be automatically taken care by Bex transports.
    Generally this is how it goes.
    You will capture the queries by creating a transport request and immediately you will create a Bex transport request and  you have to assign the previously created transport request number to this Bex transport request, so that everytime you make changes to the query will be taken care by the Bex transport.
    You can even create a Bex transport request individually.
    Hope this tip may be useful.
    Assign points if you find useful
    Thanks
    Regards
    Sam Mathew

  • What is the difference between materialised view and normal view?

    please expalin the difference in detail with an example.
    thanks.

    Hi User,
    Welcome to Forum !!!!
    Materialized view is nothing but a database Object similar to Tables,Indexes,Procedures etc.
    It contains the results of a query.
    The materialized view is refreshed when the query is executed. And are refreshed on demand
    Unlike Views, it contain data.
    It does not contain real-time data.
    Materialized view are called Snapshot(In Older Versions of Oracle).
    Thanks,
    Shankar

  • What is the difference between joint stereo and normal stereo?

    When I go to the importing options and click custom, it asks if I want it to import in joint stereo or normal stereo. Can someone tell me what the difference is? I want to do whichever one sounds better.

    Try Google:
    http://www.google.com/search?q=jointstereo+vs.stereo
    Also:
    I want to do whichever one sounds better.
    If you can' tell the difference, go with the default.

  • What's the difference between OpenGL advanced and normal modes?

    I get that Basic mode uses the cpu and Normal uses the gpu, but what exactly does Advanced mode do?
    The description says that it uses as much of the GPU as Normal Mode does, but adds "advanced techniques to improve drawing performance."
    Has anyone seen one of these advanced techniques  in action or know of a list of these mysterious improved capabilities?

    What CC said... Imagine a shader having say a length of 32 discrete instructions/steps vs. one with 16... The 32 one will concatenate specific operations in one step and may thus be more optimized, but will not work on a card that does not provide those 32 shader cores, since it could not be executed in one clock cycle. Then you would use the 16 one with instructions being split across 2 cycles... That's all there is to it and for al lintents and purposes mostly irrelevant and unimportant to the user...
    Mylenium

  • I'd like to know the difference between Flat view and Threaded view in the forum.

    anyonw know?
    discussion view style and comment view style
    any difference? i have not noticed any

    threaded view will not display posts which are replys to other posts in the main view
    only when you click on the original post will you see them

Maybe you are looking for