Need to make an app URL as default for a domain

I am having:
Glassfish + ApexListener
I need to make it so that requests for a domain are transfered to a spesific apex application:
hellowrld.com - > hellowrld.com/apex/f?p=105:7
I Searched all around the internet I cant find a solution. Maximum I found was:
1) Edit portal-ext.properties file and set company.default.home.url option
But as I am a glassfish noob I cant find the location on that file (if you know please tell me there it is on windows platform)
2) Change the default module for glassfish virtual server to apex . This allowed me to make a
hellowrld.com - > hellowrld.com/apex/f?p=4550:1:.. transfer. Modification of the "Default Web Page" Apex Listener parameter did no good if I changed the value to f?p=105:7 or apex/f?p=105:7
Please help me find a solution and make a redirect
hellowrld.com - > hellowrld.com/apex/f?p=105:7
Maybe there is some kind of glassfish module that I can install that would corectly change the Default Web Page to hellowrld.com/apex/f?p=105:7?

Thanks Udo.
I made a quik, ugly and noob-like solution for the time beeng (if enyone needs a quick solution to the above problem):
I went to glassfish/docroot/index.html file and added a <meta http-equiv="Refresh" content="0;url=/apex/f?p=105:7"> tag:

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html lang="en">

<head>
<meta http-equiv="Refresh" content="0;url=/apex/f?p=105:7">
<title>BONDS</title>
</head>
<body bgcolor="#ffffff" text="#000000" link="#594fbf" vlink="#1005fb" alink="#333366"><br> <table width="100%" border="0" cellspacing="0" cellpadding="3">
BONDS PORTAL</body></html>
I will repeat that this an ugly temporary solution witch will be replaced by one of the ones that Udo spesified.

Similar Messages

How to make a custom template the default for Apple Mail (10.7.5)?

Hi,
I'm OK with making a new custom template in Apple Mail. It shows up fine once under "custom" in the stationary pane (and once I take off signature in a new email). But... that's a lot of trouble to go through everytime I want to send an email.
So the question is: can I make my custom template my default for all my emails, unless I want to manually change it? Seems like this should be possible but I can't figure it out and haven't run into any solutions (only on how to make a template).
Do I really have to select it each time?
Best,
Joel

As an FYI: I just solved the problem by going the "low road." I'll be a bit laborious in case someone else wants a solution at a later date (I know I Googled the topic and found nothing). I experimented by simply:
Opening a new email message
Selecting my custom template
Copying the custom signature (Select All)
Opening another new email message
Selecting Edit on the Signature pulldown menu
Hitting the plus symbol to create/add a new signature in the pane
Pasting into the new signature
Naming it
Selecting "Choose signature" at the bottom of the signatures pane
And violà!!
It now appears as a possible selection *and* as the default.
Better yet - it is now my default and will work as a reply to an email.
I think I got it all right in the list above.
OK, granted, this is a pretty simply signature - a list of my website, SoundCloud, twitter etc with those names in bold and a graphic of my color logo - but... it works! YMMV.
Give it to Apple to make it so simple that any fool could do it (that would be me), you wouldn't need a "specialized" app, and - of course - there wouldn't even be instructions on how to do it!
Best,
Joel

How to make an app a file receiver for images on iOS?

Hi,
How to make an app a file receiver for images on iOS?
I did it for the Android app.xml like this:
<intent-filter>
        <action android:name="android.intent.action.SEND"/>
        <category android:name="android.intent.category.DEFAULT"/>
        <data android:mimeType="text/plain"/>
    <data android:mimeType="image/jpg"/>
    <data android:mimeType="image/jpeg"/>
    <data android:mimeType="image/png"/>
    <data android:mimeType="image/gif"/>
</intent-filter>
How to do it for iOS?
(I'm using Adobe Air 4.0)
Thank you!

What app have you used to create your ibook? Normally any app will have a menu item like File > Export that will give you the option of PDF, or you can use Print and there will be an option in the Print dialogue to Print to PDF.

In ME51N need to make Purchase Org. as mandatory only for selected one

Dear guru's
While creation of Purchase requisitions (ME51N), I need to make Purchase Org. as mandatory only for selected one Purchase Org. out of say 10 Purchase Orgs.
Is there any userexit or workaround for this.
Thanks in advance,
With regards,
Harisha

Dear Harisha,
One way is to define a transaction variant with SHD0.
http://help.sap.com/saphelp_webas620/helpdata/en/eb/5fab41d79b11d296190000e82de14a/content.htm
In the SAP Reference IMG, you can create transaction variants. Choose Basis Components -> Application Personalization -> Tailoring of Application Transactions -> Configure Transaction-Related Display Values for Fields (Transaction SHD0). Transaction variants allow you to preset values for fields in a transaction, set field attributes, or hide entire screens.
To execute a transaction variant, you define a variant transaction using the Transaction Maintenance transaction (SE93).
Once you have entered a transaction code and short description, choose transaction type Transaction with variant (Variant transaction).
To define a variant, enter the name of the transaction and the name of the variant. You can then use the new transaction code to start the special variant of the transaction.
or
In IMG under
Materials Management -> Purchasing -> Purchase Requisition -> Data Screen Layout at Document Level.
Hope this will help.
Regards,
Naveen.

How to make a production order type default for a Plant.

Hi All,
I want to know the setting to make production order type ZP01 default for a plant so that when I create a production order using CO01 for that particular plant, it should always use ZP01 as order type?

Hello Friend,
One more method is to achieve this is by using Production Scheduling Profile. In transaction OPKP, for your Plant create a new production scheduling profile or use the existing one created in your plant. Inside the production scheduling profile, in order type section, for make to stock field, maintain the value as ZP01 (which you want to come automatically all the time while creating the order by co01) and save.
Now assign this production scheduling profile in material master of all Semifinished and Finished materials.
Now create new production order by co01. On initial screen of this transaction give only material code and production plant and enter (don't give anything in order type field).
After giving material code and production plant, press Enter. After pressing enter system will take you inside the production order .
Check here by default system will take order type as ZP01.
Check and Confirm.

How can i make an external Hard drive default for iphoto

I have maxed out my memory on my MacBook with iPhoto 09. I have been trying to export photos to an external HD and then make the external HD my default drive for future photo downloads from my camera. Also, I need to clean off space on the internal HD, but not sure of the safest way to do this and make sure I don't loose any photos. Any tips to move forward? I am a Mac novice to say the least.
Thanks

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Why is most of the URL address, except for the domain name, in gray font? It's difficult to read. I would like to make the entire address font in black

[http://pics.livejournal.com/tersa/pic/006gzfsf Screenshot of the behavior]
Before I upgraded to Firefox 6.0, the URL address was displayed in black text.
After upgrading, it is now displaying only the core domain name (e.g, mozilla.com) in black text, while any extra text (like, https://support. ) is grayed out.
It is very difficult to read this gray text on my monitor. I'd like to make it so that the entire address is displayed in black text, but I couldn't seem to find any kind of configuration setting under Options to change this.
Please let me know if I can modify the URL display to be all black again.

That is a new feature in Firefox to highlight the domain in the URL bar. You can change a preference to make the entire URL dark.
Change a preference:
#type '''''about:config''''' in the Location/URL bar and press Enter.
#if you see a warning, accept (promise to be careful)
#Filter: '''''browser.urlbar.formatting.enabled'''''
#in lower panel, double-click that item to toggle value to '''''false'''''
I am not sure whether or not you need to re-start Firefox after doing the above for the change to take effect. Test and if it does not work, then re-start Firefox and test again.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

Need to make automatic startup and shut down for the instance

hi to all
i have os : Red Hat lunix as 3 , woth oracle DB 10g 10.0.1
need to make an automatic startup and shut down for the instance when i start and shutdown the OS
i tried Use dbstart and dbshut scripts then created file dbora at dbora as a script
then i did
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
nothing worked
if you will attach me any files
my mail is :
[email protected]
thanks much
Ahmed

Hi,
The /etc/oratab should have an entry for this database with 'Y' in the last field as:
Oracle_sid: Oracle_Home:Y, so when dbstart command issued it will check the oratab and starts the database.
I advise you to keep the dbstart and dbshut in different scripts and save them directly in the runlevel directories, instead of creating links.
thanks
srinivas.

Need to make a simple dvd from Habitat for Humanity video

Hi,
I work for a local habitat for humanity affilate.
We are having our local fundraiser and I want to use 2 parts off the Habitat for Humanity's international video that they sent us...While I can just use their video I thought it would be nicer if I just had the 2 clips I needed on a separate dvd.
How do I go about this??
Thanks, Laura

Laura Drew1 wrote:
The source is a dvd.
I need to take parts of the dvd off-and put them on a fresh dvd.
I may need a slideshow in the middle somewhere.
For instance the finished dvd will have 3 chapters, one video, one slideshow
then one more video.
so, step 1 is to convert the DVD content into something editable..
depending on your version of iMovie, you have diff. options.
esp. for converting just parts, Mpeg Streamclip plus the mp2 playback component (apple.com/quicktime, 20$) is the most recommended tool
chapters usually mean 'bookmarks' in a movie..
I would create 3 buttons in iDVD, to jump to each part indiviually ..
allthough, you can produce a solid movie, with converted part1, slides, part2..
all that is editing.. iDVD, as said is for encoding disks from movies ..

I need to make an app that lets the user save a text file to their docs

i am a 14 year old developer, and i have a problem with interface builder. i would like to add a button, or option in the menu that will allow the user to save a file. it is just a basic text file. can anyone please help? and im a code noob, so make it simple! thanks!

Seen these?
Guides:
http://developer.apple.com/library/mac/search/?q=open+save
Application File Management:
http://developer.apple.com/library/mac/documentation/Cocoa/Conceptual/AppFileMgm t/
The Save and Open Panels:
http://developer.apple.com/library/mac/documentation/Cocoa/Conceptual/AppFileMgm t/Concepts/SaveOpenPanels.html
Managing Accessory Views:
http://developer.apple.com/library/mac/documentation/Cocoa/Conceptual/AppFileMgm t/Articles/ManagingAccessoryViews.html

I have a pc with windows8.1 and it automatically puts download docuements to windows reader and cannot choose adobe acrobat instead or delete windows reader. How to i make adobe acrobat my download default for docuements instead of the windows reader.

I have a pc with windows8.1 and it automatically puts download docuements to windows reader and cannot choose adobe or delete/ get around the reader and the reader is jammed from deletion. How do |I make adobe acrobat my default reader?

Open Acrobat manually and go to Edit - Preferences - General. Click the "Select Default PDF Handler" button and then select Acrobat from the list and click on OK. The next time you open a PDF it will be opened in Acrobat automatically.

Need to make # of periods and frequency required for certain prod category

We have a requirement to make the # of periods and frequency fields required for a certain product category. I know I need to use a field validation for this but my issue is that the product category and product name fields are non-editable. I tried putting the validation on the product ID field but it is not working properly. It still throws the error even when values are entered and regardless of the category. Here is the expression I am trying to use:
IIf(FieldValue('<ProductCategory>')="XYZ", [<NumberOfPeriods>] is not NULL, FALSE)
Any ideas?

You can add the read-only token ($RO$) after any of the segments in the list. For example, the ($RO$) designator below sets Segment1 in structure code 1 to be read-only:
Structure code1|Segment1($RO$)|Segment2...
P.S: After I posted this message, I realized this was not what you are looking for. After all, this may help somebody.
Edited by: dbhat1 on Dec 8, 2008 3:55 PM
Edited by: dbhat1 on Dec 8, 2008 3:56 PM

Is there a way to make " focus on content " as default for all pages?

I am trying to remove the left navigation pane on my sharepoint site. Even if I am able to modify the master page and make the "DeltaPlaceHolderLeftNavBar" property as invisible, there is some extra space that appears on the left hand side of
the page. However, when I click on the "focus on content" button, it seems to hide the left empty space and the page title. I would want to set this as the default view for my page. Is there a way to do this?

Hi Verma,
I wouldn't go so far as to say your method of commenting that Script Block is incorrect, however you can more easily just add the following CSS to a script editor web part. The key to solving your issue with the left side space is the addition of the margin
rule for .ms-fullscreenmode #contentBox:
<style type="text/css">
#sideNavBox {
display: none;
#contentBox {
margin-left: 0px;
.ms-fullscreenmode #contentBox
margin-left: 0;
</style>
If you would like to also hide the "Show All Content" button altogether you could use the following JavaScript:
<script language=”javascript”>
_spBodyOnLoadFunctionNames.push(“HideBrandingsuite”);
function HideBrandingsuite()
document.getElementById(‘ctl00_fullscreenmodeBtn‘).style.visibility = ‘hidden’;
</script>
Keith Tuomi | Twitter: @itgroove_keith | Blog:
http://yalla.itgroove.net
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

Laptop died. need to make my Mac the "home" computer for my iPad & iPhone

My iPhone & iPad were initially set up on a Windows laptop, which has since died. How do I go about making an iMac be the "home" computer for these devices, so that they will be backed up when I sync?

Excellent question. I am trying to find out the same answer for my iTouch. If I get a helpful answer, I will try to let you know if you haven't already found out since March!
And if you DID get an answer that worked, could you let me know?
Thank you!

I sent email 2 days ago and still no reply about i am enable to make in app purchase..

I really need to make in app purchase, itunes support still didnt fix this problem, how long should i waited for them to fix??
I cant make in app purchase, it says your purchase could not be completed, for assistance contact itunes support..
I have contacted them and they havent reply me..

Did you try contacting them at http://www.apple.com/emea/support/itunes/contact.html

Need to make an app URL as default for a domain

Similar Messages

Maybe you are looking for