Need to put a logic in FDM where by accounts and ICP is compared and accord
Hello ,
Need to put a logic in FDM where by accounts and ICP is compared and accordingly ICP field is modified. Need to create an array of accounts
Scenario:
ICP needs to be derived based on account code. If account code is part of a predetermined list then further logic needs to be executed.
For ex. If Acc is part of the account list ("7880","7881","7882","7883","7340","7341",
"7342","7343","7345","7347","7346","8460","8603","8484","8610","8611","8612","8614")
then if ICP <> 00000 then ICP = strfield
else if Acc not part of list then ICP = "00000".
We are facing issues in defining and referencing an array in FDM which would store the list of accounts code which can then be compared along with ICP. The other logic is as follows
If strField <> "00000" And Val = Acc_Arr(i) Then
T3 = strfield
End If
If strField = "00000" And Val = Acc_Arr(i) Then
T3 = "ICPENT"
End If
If strField <> "00000" And Val <> Acc_Arr(i) Then
T3 = "00000"
End If
If strField = "00000" And Val <> Acc_Arr(i) Then
T3 = "00000"
End If
Regards,
Hi,
Two options:
1. You can evaluate ICP based on either source account or target account. Use varValues(13) for source account and varValues(14) for target account in the conditional mapping statement for ICP.
2. A faster performing option is to concatenate the Account and ICP into a single code, which you then import in the ICP dimentsion. You can then use simple mapping rules to do your ICP mappings and avoid conditional statements altogether.
Regards,
Vlado
Similar Messages
-
The additional content downloads and installs, but it won't show up in my Logic Pro X. I cannot find the "Library" folder where this additional content is downloaded to and can't seem to activate the new loops and instruments in my Logic Pro X (i.e. loops are still greyed out). Any solutions?
similar problem that I'm hoping revives this thread. Took over 24hrs to dload additional content (after another full day for the actual problem) due to a bad dload rate. so quitted, and relocated closer to my wifi router. Restart, open logic x, Menu bar: Logic Pro/ Download Additional content ...Tells me i have no internet connection.... Ahh... I do, I'm using it right now! Tried restarting and relaunching. same thing every time.
Any clues?
This whole apple upgrade has been so disappointing! All i wanted to do was reinstall logic 9! $2500 later and I'm still struggling. ***! -
I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutiqu
It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
Type
ping facebook.com
into the window. Do you see any transmissions? What is the IP address used?
I see:
PING facebook.com (173.252.110.27): 56 data bytes
64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
^C
--- facebook.com ping statistics ---
10 packets transmitted, 10 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
Try the same with "dig":
dig facebook.com
; <<>> DiG 9.8.3-P1 <<>> facebook.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;facebook.com. IN A
;; ANSWER SECTION:
facebook.com. 775 IN A 173.252.110.27
;; Query time: 11 msec
can you "ping" facebook? -
I forgot the secret answer and I need to put an alternate e-mail
I forgot the secret answer and I need to put an alternate e-mail
Click here for information; if you forgot one and only one, you may be able to reset it and set up a rescue email. If not, you'll need to contact Apple in some way.
(76214) -
Yesterday I was open my ipad then the screen is showing i need to put my hotmail password in. But i forgot my hotmail password. and i go back to reset my hotmail password but i can not reset it. Because i just use my hotmail account to play my ipad. I did not use the hotmail acc to sent the email. That why i dont know the answer.EX; what was the subject line of some of the email message you were send?name some of the folders you are created. Now my ipad is look like it lock it. can not play it. what can i do now ? please help me><
You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums. -
Where to put validation logic...
Hi,
We have a lot of validation logic in our database. Next to the normal foreign key, check, unique constraints, we use triggers for validation (which throw errors with custom error codes when needed).
On top of the database we are building a fairly large JClient based application using the BC4J framework. BC4J offers the possibility to use validation beans for validating the entity row. We are wondering if we should use this. If we implement the validation logic for each entity we are actually duplicating the validation logic that's already available in the database. And some database constraints are easily implemented using the standard validation beans (like not null and unique checks), but more complex validation rules can sometimes only be done in the database (so we need to use the database for validation using a method validation bean).
Like I said this means a lot of duplicating validation logic. Which first of all is an inefficient thing to do. Second validation logic can change over time, which means we need to change the logic on two places. It's easy to forget to change the logic on one place.
We found a way to somewhat use the database validation logic for validating entity rows. We just simple insert a row in the database and post the changes. If the new row contains an error an exception is thrown. This JBO exception contains a reference to the SQL exception. Which can be used to retrieve the database error code. Unfortunately we have not found a good way (yet) to find out where the error occured (in which trigger for example). Error codes don't have to be unique so it's important to know in which context they occured. Another problem with this method is we can't do an early validate on a limitted set of row data. E.g. we sometimes use wizards in our application for adding new rows. We really want to check the data after each step in the wizard (step by step). This is ofcourse impossible with the database logic. This means we again need to create the same validation logic again. I don't think it's even possible to use the row.validate() method for this (and ofcourse implement the validation logic in the entity too), because this method validates the complete row.
In short, where is the best way to put validation logic? And (how) can this be done without duplicating (to much) logic?
Regards,
Peter
P.S.
Does anyone know how to retrieve the context of an SQL exception?Do you users have access to the data/tables outside
of using your application? (as in using sqlplus?)Not at the moment.
Ideally the database should just be going
constraint--data integrity type of checks. The
business rules would be in the business layer not
persitance layer..So in this case, they would be in
the bc4j entity objects.. Well most of them are simple integrity constraints, but sometimes we have to check things using triggers which are way more complicated and need extensive database access. It's more logical to do that in the database. If the trigger runs into a problem it raises an application error. We are hoping we can use this error somehow in our application.
That assumes that the only way a user can modify that
data is through your application only.Well it is, and if another application is written for it the BC4J entities etc. will probably be re-used, but like I said there are other reasons for not having all the business-rules in the BC4J layer.
by the way, are you migrating an existing application
that already has all the business rules in the
database?No, it's a brand new application, but we started out with defining a lot of business rules in the database because that seems a more logical place to put them (to us). I understand that some business-rules can better be implemented in the BC4J entities, but it's not that easy for every business rule we have.
Regards,
Peter -
There are sites like Amazon, Facebook and pages where I need to put info like name, address, etc, that don't show where 'next' or 'skip' or 'continue' are. There is just alot of space. When I move my cursor around I have to guess if it's the right one and click
For some ways around this see [http://kb.mozillazine.org/User_name_and_password_not_remembered User name and password not remembered - MozillaZine Knowledge Base]
Another option is the [https://addons.mozilla.org/en-US/firefox/addon/60265/ Saved Password Editor] add-oin which allows you to add passwords for sites that disable password saving. -
Where do i need to put third party jar files in localmachine?
Hi
I am writing jsp where i am importing the classes from third party libraries. When i am running this jsp, it is getting error as "cannot access class ...". Where do i need to put these third party libraries in my local machine in order to run the jsp locally.
ThanksThe easiest way is to put them in WEB-INF/lib.
--olaf -
Where do we need to put backcontrol file in RAC system
Hi Friends,
We have a 4 nodes cluster. The database in supported by SAN/ASM with two diskgroup.
In rman backup setting.
I saw that CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10.2.0/db_1/dbs/snapcf_sale4.f'; # default
auto backup control file is on.
I gues that auto control file is backuped to '/u01/app/oracle/product/10.2.0/db_1/dbs/snapcf_sale4.f';
For best, where do we need to put control file for backup/recovery?
Do you need to put backuped control file in ASM FRA diskgroup or both local file system and ASM?
Please advise me
JinI make some clears for this requirements.
we have a schedule backup and stores in ASM diskgroup in SAN.
As system admin and policy of SAN disaster recovery, we need to generate backup in a local file system.
in this case, we only backup database plus archival files in external file system. but I still saw snapshot control file is still put into default linux location.
I am not able to see this snapshot in external file system.
For SAN disaster recovery, do we need to save a control file snapshot in external file?
Can I apply BACKUP CURRENT CONTROLFILE TO DESTINATION "external file path" for SAN disaster recovery?
Thanks in advance!
Jin -
Where can I find the registration number of my product? I need to put it on a different computer.
If you registered the product with Adobe the number should be in your account.
You will need to come here via your web browser
https://forums.adobe.com/thread/1595271
Then click on the red Adobe logo (top let on the page) and choose manage account. You should then be able to browse your purchase history and registered products. -
Hello everybody!
I have a big doubt and so does my CIO.
I'd like to develop Web Services using the facade pattern (Entity + Session). I prefer to put the business logic into the stateless EJB and just go to the database to insert, update or delete records.
But the boss says it would be better just to develop a pl SQL (Oracle) that has all the business logic into it and just make the call from the Stateless.
Is there a general approach? What do you recommend?
Thank you very much!Hi,
in my experience it is better to put the logic in the bean itself.Because if we want to change the database later, it would be very easier. -
Logic sampler, i need to put my e mu e4xt ultra samples into my logic pro
i have my e mu 4xt ultra samples on my desk top. they show up as .e4b
i need to convert them to .exs so they will line up in my logic sampler.
how can i do this?
aaronI believe you are mistaken, I'm afraid. I could be wrong, but I'm pretty sure Logic EXS24 doesn't read EMU format samples - just AKAI and .gig files (and soundfonts).
But there are a couple commercial programs out there that can convert EMU disks. The one I use is called 'Translator' by Chicken Systems. Unfortunately, I'm not a big fan of the product which has always been extremely buggy.
Nevertheless, it did do the EMU translations for me. I also noticed a recent announcement from them about a new program. May be worth a look.
There's another translator program out there, but I don't remember the name. Do a search on KVR... There are more options on the PC if you have (or can borrow) one.
cheers. -
I repeat my question: "How do I put 'The Menu Bar' back where it was before. What I mean by The Menu Bar is: File,Edit, Format, View, Help it is on top where the Browser arrow is!!. I don't know how to put this Menu Bar where is belongs...
Right click up where the menu bar should be, it will have a list of options. You will see menu bar as the top option. Just click it and it will check it off and reappear.
-
Where we need to put default gateway?
Hi ,
I am installing ORACLE RAC on vmware.
my network setting is in this way.
on node1
eth0 192.168.0.1
eth1 192.168.0.11
on node 2
eth0 192.168.0.2
eth1 192.168.0.22
where should i define default gateway. i.e on eth0 or eth1?
thanks.Hi chandra,
I did initially but at that time i was getting an error.
after that i set the vip only for eth0 was getting an error but i change the parameter in racgvip it works.
In the previous where i applied vip on both eth0 and eth1 in that i doesnt work.
I am confused. In my case it doesnt work for both unlsess i change the parameter in racgvip.
in both was getting an error default gateway is not defined.
Thanks -
SAP PS Module Report, Help needed for the Right Logic.
Hi,
I have to develop a PS module Report . This spec of this report is when you enter , project # , month , date , proj type it should display all the projects and only the billing levels with different fiels like ITD cost, ITD sales, ytd cost, sales, awards etc etc.
Right now Iam getting the O/P : in the following manner, There are many fields I am just showing the desired ones which have to be changed.
Proj, Title, award, ITDsales, ITD cost , ytd sales, ytd costs,
14148, New prj 123 -- --- -
14148-B01, bill1 -
234 -
456 -
14148-B02, bill2 -
789 -
123 -
14148.001 wbs1 -
123 -
456
14148.001 wbs2 -
567 -
890
But for me the desired output must be only for project and the billing levels. It shouldnt be for WBS elements xxxx.001 and xxxx.002.
Desired output:
Proj, Title, award, ITDsales, ITD cost , ytd sales, ytd costs,
14148, New prj 123 -- 690 -
1346
14148-B01, bill1 -
234 -
456 -
14148-B02, bill2 -
789 -
123 -
The ITD costs and YTD costs must be added 123 + 567 = 690 and
456+890 = 1346.
And these values must come on the project level.
P.S: I can restrict the values for wbs elements , means I can filter them at PRPS table by giving prps-stufe LE 2. Then I wont get the wbs level, But I want the values of these to be added up and then show it on the project level.
Please go through this code and let me know where exactly I need to put the right logic to work in the desired manner.
Thanks in advance
Dan
Code Below************************
[code]TABLES: PROJ, "Project Definition
PRPS, "WBS Elements
prhi,
CEPC, " Profit Center w/ Group Head info
BPGE, "Plans (12, 13, etc.)
COSP, "Primary Cost Element (Bill Sales, DPC)
COSS, "Secondary Cost Element (Shrd Sls,Sal,etc)
COSB, "Results Analysis Cost Elements (Unbil Sls)
COOI, "Commitments management: Line items
JEST, "Project Status
TCJ04, "Person Responsible for Project
zpclasses, "Project classes.
New Added
CRCO, " Assignment of Work Center to Cost Center
CRHD. " Work Center Header
Record Layout of extracted data
TYPES: BEGIN OF EXDEF, "Data definition of extract data
X_BU(2) TYPE C, "Business Unit
X_CNTR(10) TYPE C, " Profit Center
X_PROJ(24) TYPE C, "Project def (Prj)
X_CREP(30) TYPE C, "Contract Rep.
X_BDREP(25) TYPE C, "BD Rep. name
X_GRPH(15) TYPE C, "Tech Rep employee name
X_ACTREP(15) TYPE C, "Acct Rep employee name
X_PMGR(15) TYPE C, "PM employee name
X_TTLE(35) TYPE C, "Title
X_CLNT(20) TYPE C, "Client
X_POCN(20) TYPE C, "Prime Contract Number
X_TYPE(13) TYPE C, "Order Type Sarnoff
X_OPEN(10) TYPE C, "Open Date
X_CLOSE(10) TYPE C, "Close Date
X_CGT(4) TYPE C, "CO, GV, TC
X_DISTR(2) TYPE C, "Distribution Channel
X_CONTR(6) TYPE C, "Percentage contribution
X_AWRD(14) TYPE C, "Award (Plan 11)
X_P12R(14) TYPE C, "Auth Revenue (Plan 12 @ Rev)
X_P12C(14) TYPE C, "Auth Cost (Plan 12 @ Cost)
X_P13R(14) TYPE C, "Auth Revenue (Plan 13 @ Rev)
X_P13C(14) TYPE C, "Auth Cost (Plan 13 @ Cost)
X_ITDS(14) TYPE C, "ITD Sales
X_ITDC(14) TYPE C, "ITD Costs
X_YTDS(14) TYPE C, "YTD Sales
X_YTDC(14) TYPE C, "YTD Costs
X_MTHS(14) TYPE C, "Current Month Sales
X_MTHC(14) TYPE C, "Current Month Costs
X_ITDB(14) TYPE C, "ITD Billed Sales
X_YTDB(14) TYPE C, "YTD Billed Sales
X_MTHB(14) TYPE C, "Current Month Billed Sales
X_COMM(14) TYPE C, "Commitments
X_STAT(6) TYPE C, "Active or Inactive (REL, TECO, or CLSD)
X_ZPROJCLASS(12),
X_MTHIC(14) TYPE C, "Current Month Incremental Costs
X_YTDIC(14) TYPE C, "YTD Incremental Costs
X_ITDIC(14) TYPE C, "ITD Incremental Costs
X_ZSCURVE(10) TYPE C, "S-CURVE Status
New Added
X_CM_COST(20) TYPE C,
X_AM_COST(20) TYPE C,
X_TL_COST(20) TYPE C,
X_KP_COST(20) TYPE C,
X_PM_COST(20) TYPE C,
END OF EXDEF.
Data declarations
FIELD-SYMBOLS <MNT> .
DATA: ETAB TYPE EXDEF OCCURS 100 WITH HEADER LINE.
DATA: X1_PM_COST(20) TYPE C,
X1_TL_COST(20) TYPE C,
X1_AM_COST(20) TYPE C,
X1_CM_COST(20) TYPE C,
X1_KP_COST(20) TYPE C.
DATA: KOKRS_FIXED LIKE PROJ-VKOKR VALUE 'DSRC', "Controlling Area
TOTAL_AWARD LIKE BPGE-WTGES,
TOTAL_AUTHR12 LIKE BPGE-WTGES,
TOTAL_AUTHC12 LIKE BPGE-WTGES,
TOTAL_AUTHR13 LIKE BPGE-WTGES,
TOTAL_AUTHC13 LIKE BPGE-WTGES,
TOTAL_ITDSALES LIKE BPGE-WTGES,
TOTAL_ITDCOSTS LIKE BPGE-WTGES,
TOTAL_ITDICOSTS LIKE BPGE-WTGES,
TOTAL_YTDSALES LIKE BPGE-WTGES,
TOTAL_YTDCOSTS LIKE BPGE-WTGES,
TOTAL_YTDICOSTS LIKE BPGE-WTGES,
TOTAL_MTHSALES LIKE BPGE-WTGES,
TOTAL_MTHCOSTS LIKE BPGE-WTGES,
TOTAL_MTHICOSTS LIKE BPGE-WTGES,
TOTAL_ITDBILLED LIKE BPGE-WTGES,
TOTAL_YTDBILLED LIKE BPGE-WTGES,
TOTAL_MTHBILLED LIKE BPGE-WTGES,
TOTAL_COMMITMENT LIKE COOI-WTGBTR,
HOLD_PRART LIKE PRPS-PRART,
COUNT_PROJECTS TYPE I,
MNT_INDX(20) TYPE C,
HLD_INDX(3) TYPE N,
YYYY_MM(10) TYPE C,
TEMP-DATE(8) TYPE C.
Selection Screen
SELECTION-SCREEN SKIP 3.
SELECTION-SCREEN BEGIN OF BLOCK XEXTRPM WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS MONTH(2) TYPE N OBLIGATORY.
PARAMETERS YEAR(4) TYPE N OBLIGATORY.
SELECT-OPTIONS: EXTRPRJ FOR PROJ-PSPID. " Range of Projects
SELECT-OPTIONS: EXTRTYP FOR PRPS-PRART. "Project Types (CO,GV,etc.*)
SELECT-OPTIONS: EXTRPCTR FOR PROJ-PRCTR. " Range of Profit centers
SELECTION-SCREEN SKIP 2.
PARAMETERS: OPT1 RADIOBUTTON GROUP OPTN,
OPT2 RADIOBUTTON GROUP OPTN DEFAULT 'X'.
select-options : s_pc for proj-zprojclass. "project class
SELECTION-SCREEN END OF BLOCK XEXTRPM.
Select Tables
START-OF-SELECTION.
write: / 'Sales data (Unshared) extracted on: ', sy-datum.
uline.
CLEAR: COUNT_PROJECTS,
TOTAL_AWARD,
TOTAL_AUTHR12,
TOTAL_AUTHC12,
TOTAL_AUTHR13,
TOTAL_AUTHC13,
TOTAL_ITDSALES,
TOTAL_ITDCOSTS,
TOTAL_YTDSALES,
TOTAL_YTDCOSTS,
TOTAL_MTHSALES,
TOTAL_MTHCOSTS,
TOTAL_ITDBILLED,
TOTAL_YTDBILLED,
TOTAL_MTHBILLED,
TOTAL_COMMITMENT,
ETAB.
PROJ Table Project Definition
SELECT * FROM PROJ "Project Definition
WHERE PSPID IN EXTRPRJ AND " Range of Project Numbers
PRCTR IN EXTRPCTR and " Range of Profit center
zprojclass in s_pc. "project class
SELECT * FROM PRPS WHERE "WBS Elements
PRART IN EXTRTYP " Range of Proj.Types (CO,GV,TC..
and PSPHI = PROJ-PSPNR.
HOLD_PRART = ' '. "clears project type
CLEAR ETAB.
ETAB-X_PROJ = PRPS-POSID.
ETAB-X_BU = PRPS-PRCTR(2). "Business Unit
ETAB-X_PMGR = PROJ-VERNA. "Project Manager
IF PRPS-PRCTR(2) = '01'.
ETAB-X_CNTR = PRPS-PRCTR. " Profit Center
CONCATENATE SPACE PRPS-PRCTR INTO ETAB-X_CNTR SEPARATED BY SPACE.
ELSE.
ETAB-X_CNTR = PRPS-PRCTR. " Profit Center
ENDIF.
ETAB-X_TTLE = PRPS-POST1. "Title
CLEAR TEMP-DATE.
TEMP-DATE = PROJ-PLFAZ. "Project planned start date
CONCATENATE TEMP-DATE4(2) '/' TEMP-DATE6(2) '/'
TEMP-DATE+0(4) INTO ETAB-X_OPEN.
TEMP-DATE = PROJ-PLSEZ. "Project planned finish date
CONCATENATE TEMP-DATE4(2) '/' TEMP-DATE6(2) '/'
TEMP-DATE+0(4) INTO ETAB-X_CLOSE.
Tech Lead
will comment below
SELECT SINGLE VERNA FROM TCJ04 "Tech Lead name from TCJ04
INTO (ETAB-X_GRPH) WHERE VERNR = PROJ-ZGRPHD.
End Of Tech Lead
Account Manager
SELECT SINGLE VERNA FROM TCJ04 "Acct Manager from TCJ04
INTO (ETAB-X_BDREP) WHERE VERNR = PROJ-ZBUSDEV.
******End Of Account Manager
Key Personnel
SELECT SINGLE VERNA FROM TCJ04 "Account Rep name from TCJ04
INTO (ETAB-X_ACTREP) WHERE VERNR = PROJ-ZRESPDIR.
********End of Key Personnel
**Contract Manager
SELECT SINGLE VERNA FROM TCJ04 "Contract Rep name from TCJ04
INTO (ETAB-X_CREP) WHERE VERNR = PROJ-ZCNTREP.
End of Contract Manager
PRPS Table WBS's attached to the Project
SELECT * FROM PRPS WHERE "WBS Elements
PRART IN EXTRTYP "Range of Proj.Types (CO,GV,TC..
AND PSPHI = PROJ-PSPNR.
order by posid stufe. "Sort by WBS & Level (needed?)
get info from level 1 of the WBS
IF PRPS-STUFE EQ 1. "top-level WBS element
HOLD_PRART = PRPS-PRART. "save project type for later
ETAB-X_STAT = '????'. "set ? as the default status
get Status for level 1
SELECT * FROM JEST "use JEST to determine Status
WHERE OBJNR = PRPS-OBJNR
AND INACT EQ SPACE. "space denotes an active status
CASE JEST-STAT. "find the system status (Ixxx)
WHEN 'I0001'.
ETAB-X_STAT = 'CRTD'. "Created
WHEN 'I0002'.
ETAB-X_STAT = 'REL'. "Released
WHEN 'I0045'.
ETAB-X_STAT = 'TECO'. "Technically Complete
WHEN 'I0046'.
ETAB-X_STAT = 'CLSD'. "Closed
ENDCASE.
ENDSELECT.
Select only active projects (ie; those not with TECO or CLSD)
IF OPT2 EQ 'X'
AND ( ETAB-X_STAT EQ 'TECO'
OR ETAB-X_STAT EQ 'CLSD' ).
EXIT.
ENDIF.
*comment Contract Rep and Proj man because we get them from PROJ now
etab-x_crep = prps-zzcont. "Contract Rep.
etab-x_pmgr = prps-verna. "Program Manager Name
ETAB-X_CLNT = PRPS-ZZMANDT. "Client Name
ETAB-X_CGT = PRPS-PRART. "CO, GV, TC, etc
ETAB-X_DISTR = PRPS-ZZVTWEG. "Distrib Channel (ie; GP, etc.)
ETAB-X_CONTR = PRPS-USR04. "Contribution %
ETAB-X_POCN = PRPS-ZZPOCN. "Contract Number
ETAB-X_TYPE = PRPS-ZZORDT. "Order Type Sarnoff
Award and Authorization (Revenue & Cost)
SELECT * FROM BPGE
WHERE OBJNR = PRPS-OBJNR
AND LEDNR = '0001' "Budget / Planning Ledger
AND TRGKZ = 'N' "Object indicator
AND WRTTP = '01' "Value Type
AND ( VERSN = '011' "011 = Award
OR VERSN = '012' "012 = Billing Authorization
OR VERSN = '013' ). "013 = RA Authorization
"010 = Funding Authorization
Award Plan 11
IF BPGE-VERSN = '011'. "Plan 11 = Award
CASE BPGE-VORGA.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_AWRD = ETAB-X_AWRD + BPGE-WTGES.
ENDCASE.
ENDIF.
IF prps-stufe eq '2'.
Authorization (Revenue & Cost plan 12) Plan 12
IF BPGE-VERSN = '012'. "Plan 12 = RA Authorization
CASE BPGE-VORGA.
WHEN 'KSTR'. "KSTR = Revenue level
ETAB-X_P12R = ETAB-X_P12R - BPGE-WTGES.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_P12C = ETAB-X_P12C + BPGE-WTGES.
ENDCASE.
ENDIF.
Authorization (Revenue & Cost plan 13) Plan 13
IF BPGE-VERSN = '013'. "Plan 13 = RA Authorization
CASE BPGE-VORGA.
WHEN 'KSTR'. "KSTR = Revenue level
ETAB-X_P13R = ETAB-X_P13R - BPGE-WTGES.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_P13C = ETAB-X_P13C + BPGE-WTGES.
ENDCASE.
ENDIF.
endif.
ENDSELECT. "BPGE
ENDIF. "end of if prps-stufe eq 1. top-level WBS element
COSP Table (External Postings) Awards
COSP Table (External Postings) Billed Sales
COSP Table (External Postings) DPC's & Legacy Load
SELECT * FROM COSP
WHERE OBJNR = PRPS-OBJNR AND
GJAHR LE YEAR
AND (
( kstar = '0000400999' and "old CE for Award $
( KSTAR BETWEEN '0000400990' AND '0000400999' AND
VERSN = '011' AND "11 = Award
WRTTP = '01' ) "01 = Planned
OR ( ( KSTAR BETWEEN '0000400001' AND '0000400989' OR
KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
WRTTP = '04' ) "04 = Actuals
OR ( ( KSTAR BETWEEN '0000998001' AND '0000998010' OR
KSTAR BETWEEN '0000600001' AND '0000601999' ) AND
WRTTP = '04' ) "04 = Actuals
*------- Awards
if cosp-kstar = '0000400999' and "old 400999 = Awards
IF COSP-KSTAR BETWEEN '0000400990' AND '0000400999' AND
COSP-VERSN = '011' AND "11 = Award
COSP-WRTTP = '01'. "01 = Planned
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_AWRD = ETAB-X_AWRD + <MNT>.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_AWRD = ETAB-X_AWRD +
COSP-WKG001 + COSP-WKG002 +
COSP-WKG003 + COSP-WKG004 +
COSP-WKG005 + COSP-WKG006 +
COSP-WKG007 + COSP-WKG008 +
COSP-WKG009 + COSP-WKG010 +
COSP-WKG011 + COSP-WKG012 +
COSP-WKG013 + COSP-WKG014 +
COSP-WKG015 + COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Billed Sales
IF ( COSP-KSTAR BETWEEN '0000400001' AND '0000400989' OR
COSP-KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
COSP-WRTTP = '04'.
"0000999001 = ITD Sales
"0000999003 = ITD Billed Revenue
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDB = ETAB-X_ITDB - <MNT>.
ETAB-X_YTDB = ETAB-X_YTDB - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHB = ETAB-X_MTHB - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_ITDB = ETAB-X_ITDB -
COSP-WKG001 - COSP-WKG002 -
COSP-WKG003 - COSP-WKG004 -
COSP-WKG005 - COSP-WKG006 -
COSP-WKG007 - COSP-WKG008 -
COSP-WKG009 - COSP-WKG010 -
COSP-WKG011 - COSP-WKG012 -
COSP-WKG013 - COSP-WKG014 -
COSP-WKG015 - COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- DPC's & Legacy Load
IF ( COSP-KSTAR BETWEEN '0000998001' AND '0000998010' OR
COSP-KSTAR BETWEEN '0000600001' AND '0000601999' ) AND
COSP-WRTTP = '04'.
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSP-WKG001 + COSP-WKG002 +
COSP-WKG003 + COSP-WKG004 +
COSP-WKG005 + COSP-WKG006 +
COSP-WKG007 + COSP-WKG008 +
COSP-WKG009 + COSP-WKG010 +
COSP-WKG011 + COSP-WKG012 +
COSP-WKG013 + COSP-WKG014 +
COSP-WKG015 + COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDSELECT.
COOI Table (Commitments) commitments for the WBS elements
SELECT * FROM COOI
WHERE OBJNR = PRPS-OBJNR.
ETAB-X_COMM = ETAB-X_COMM + COOI-WTGBTR.
ENDSELECT.
COSS Table (External Postings) G&A on Commitments
COSS Table (External Postings) Shared Billed Sales
COSS Table (External Postings) Shared DPC's
COSS Table (External Postings) Salary,ESE,OH, & G&A
SELECT * FROM COSS
WHERE
( OBJNR = PRPS-OBJNR AND
WRTTP = '22' ) "G&A on Commitments
OR
( OBJNR = PRPS-OBJNR AND
GJAHR LE YEAR AND
WRTTP = '04' AND "04 = Actuals
( "Shared Billed Sales
( KSTAR BETWEEN '0000400001' AND '0000400989' OR
KSTAR BETWEEN '0000999001' AND '0000999003' )
OR "Shared DPC's
( KSTAR BETWEEN '0000600001' AND '0000601999' )
OR "Salary,ESE,OH, & G&A
( ( KSTAR BETWEEN '0000001000' AND '0000001999' OR
KSTAR BETWEEN '0000002100' AND '0000002199' OR
KSTAR BETWEEN '0000002500' AND '0000002599' OR
KSTAR BETWEEN '0000002800' AND '0000002899' ) )
and parob not like 'PR%' ) "commented out on 4/19/2000
*------- G&A on Commitments (NOTE: data is always as of the RUN date)
IF COSS-WRTTP = '22'.
ETAB-X_COMM = ETAB-X_COMM +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ENDIF.
*------- Shared Billed Sales
IF ( COSS-KSTAR BETWEEN '0000400001' AND '0000400989' OR
COSS-KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDB = ETAB-X_ITDB - <MNT>.
ETAB-X_YTDB = ETAB-X_YTDB - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHB = ETAB-X_MTHB - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDB = ETAB-X_ITDB -
COSS-WKG001 - COSS-WKG002 -
COSS-WKG003 - COSS-WKG004 -
COSS-WKG005 - COSS-WKG006 -
COSS-WKG007 - COSS-WKG008 -
COSS-WKG009 - COSS-WKG010 -
COSS-WKG011 - COSS-WKG012 -
COSS-WKG013 - COSS-WKG014 -
COSS-WKG015 - COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Shared DPC's
IF COSS-KSTAR BETWEEN '0000600001' AND '0000601999' AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Salary,ESE,OH,& G&A
IF ( COSS-KSTAR BETWEEN '0000001000' AND '0000001999' OR
COSS-KSTAR BETWEEN '0000002100' AND '0000002199' OR
COSS-KSTAR BETWEEN '0000002500' AND '0000002599' OR
COSS-KSTAR BETWEEN '0000002800' AND '0000002899' ) AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDSELECT.
COSB Table (Results from running RA) Unbilled Sales
SELECT * FROM COSB
WHERE OBJNR = PRPS-OBJNR
AND KSTAR BETWEEN '0000003004' AND '0000003005'
"0000003004 = Unbilled Revenue
"0000003005 = Unearned Revenue
AND GJAHR LE YEAR
AND WRTTP = '32'. "32 = Results Analysis
IF YEAR = COSB-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSB-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDS = ETAB-X_ITDS - <MNT>.
ETAB-X_YTDS = ETAB-X_YTDS - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHS = ETAB-X_MTHS - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSB-GJAHR.
ETAB-X_ITDS = ETAB-X_ITDS -
COSB-WKG001 - COSB-WKG002 -
COSB-WKG003 - COSB-WKG004 -
COSB-WKG005 - COSB-WKG006 -
COSB-WKG007 - COSB-WKG008 -
COSB-WKG009 - COSB-WKG010 -
COSB-WKG011 - COSB-WKG012 -
COSB-WKG013 - COSB-WKG014 -
COSB-WKG015 - COSB-WKG016.
ELSE.
EXIT.
ENDIF.
ENDSELECT.
ENDSELECT. "End of WBS records (from PRPS) for project
Get Total Sales by adding Billed Sales to Unbilled Sales.
ETAB-X_ITDS = ETAB-X_ITDS + ETAB-X_ITDB.
ETAB-X_YTDS = ETAB-X_YTDS + ETAB-X_YTDB.
ETAB-X_MTHS = ETAB-X_MTHS + ETAB-X_MTHB.
IF HOLD_PRART IN EXTRTYP. "Matches the user requested project type
IF OPT1 EQ 'X' OR "All projects
( OPT2 EQ 'X' AND "Only active projects
ETAB-X_STAT NE 'TECO' AND
ETAB-X_STAT NE 'CLSD' ).
TOTAL_AWARD = TOTAL_AWARD + ETAB-X_AWRD.
TOTAL_AUTHR12 = TOTAL_AUTHR12 + ETAB-X_P12R .
TOTAL_AUTHC12 = TOTAL_AUTHC12 + ETAB-X_P12C.
TOTAL_AUTHR13 = TOTAL_AUTHR13 + ETAB-X_P13R.
TOTAL_AUTHC13 = TOTAL_AUTHC13 + ETAB-X_P13C.
TOTAL_ITDSALES = TOTAL_ITDSALES + ETAB-X_ITDS.
TOTAL_ITDCOSTS = TOTAL_ITDCOSTS + ETAB-X_ITDC.
TOTAL_YTDSALES = TOTAL_YTDSALES + ETAB-X_YTDS.
TOTAL_YTDCOSTS = TOTAL_YTDCOSTS + ETAB-X_YTDC.
TOTAL_MTHSALES = TOTAL_MTHSALES + ETAB-X_MTHS.
TOTAL_MTHCOSTS = TOTAL_MTHCOSTS + ETAB-X_MTHC.
TOTAL_ITDBILLED = TOTAL_ITDBILLED + ETAB-X_ITDB.
TOTAL_YTDBILLED = TOTAL_YTDBILLED + ETAB-X_YTDB.
TOTAL_MTHBILLED = TOTAL_MTHBILLED + ETAB-X_MTHB.
TOTAL_COMMITMENT = TOTAL_COMMITMENT + ETAB-X_COMM.
PERFORM SHIFT_SIGN.
APPEND ETAB. "Write data to internal table
CLEAR ETAB.
COUNT_PROJECTS = COUNT_PROJECTS + 1. "Count # of Projects
ENDIF.
ENDIF.
ENDSELECT.
ENDSELECT. "End of Projects from PROJ table
PERFORM GRAND_TOTALS.
SORT ETAB BY X_BU X_PROJ.
ETAB-X_BU = 'BU'.
ETAB-X_CNTR = 'PrftCntr'.
ETAB-X_PROJ = 'Proj'.
ETAB-X_CREP = 'Contract Mgr'.
ETAB-X_BDREP = 'Account Mgr'.
ETAB-X_GRPH = 'Technical Lead'.
ETAB-X_ACTREP = 'Key Person1'.
ETAB-X_PMGR = 'Program Mgr'.
ETAB-X_TTLE = 'Title'.
ETAB-X_CLNT = 'Client'.
ETAB-X_POCN = 'Contract #'.
ETAB-X_TYPE = 'Type'.
ETAB-X_OPEN = 'Open'.
ETAB-X_CLOSE = 'Close'.
ETAB-X_CGT = 'CGT'.
ETAB-X_DISTR = 'DC'.
ETAB-X_CONTR = 'Contr%'.
ETAB-X_AWRD = 'Award'.
ETAB-X_P12R = 'Auth12 Sales'.
ETAB-X_P12C = 'Auth12 Cost'.
ETAB-X_P13R = 'Auth13 Sales'.
ETAB-X_P13C = 'Auth13 Cost'.
ETAB-X_ITDS = 'ITD Sales'.
ETAB-X_ITDC = 'ITD Costs'.
ETAB-X_YTDS = 'YTD Sales'.
ETAB-X_YTDC = 'YTD Costs'.
ETAB-X_MTHS = 'Mth Sales'.
ETAB-X_MTHC = 'Mth Costs'.
ETAB-X_ITDB = 'ITD Billed'.
ETAB-X_YTDB = 'YTD Billed'.
ETAB-X_MTHB = 'Mth Billed'.
ETAB-X_COMM = 'Commitments'.
ETAB-X_STAT = 'Status'.
INSERT ETAB INDEX 1. "Write a report header line to internal table
CLEAR ETAB.
CALL FUNCTION 'Z_RH_START_EXCEL_DATA_OLE'
EXPORTING
data_name = 'C:\WINNT\Profiles\cbraswell\Desktop\TestTemp.xlt'
DATA_NAME = 'ZSales.XLS'
DATA_PATH_FLAG = 'W'
DATA_TYPE = 'DAT'
DATA_BIN_FILE_SIZE = 'ZSales'
CHART_TITLE = 'ZSales'
CHART_TYPE = 2
CATEGORY_TITLE = 'ZSales'
VALUE_TITLE = 'ZSales'
DATA_XTOP_COR = 0
DATA_YTOP_COR = 0
DATA_XBOT_COR = 0
DATA_YBOT_COR = 0
CATEGORY_XTOP_COR = 0
CATEGORY_YTOP_COR = 0
CATEGORY_XBOT_COR = 0
CATEGORY_YBOT_COR = 0
TABLES
DATA_TAB = ETAB
EXCEPTIONS
NO_BATCH = 1
DOWNLOAD_ERROR = 2
INVALID_TYPE = 3
INTERNAL_ERROR = 4
NO_OLE_SUPPORT = 5
OLE_FILE_ERROR = 6
OLE_ERROR = 7
NO_DATA = 8
COORDINATE_ERROR = 9
OTHERS = 10.
Negative # sign in the front of number for downloading to Excel
FORM SHIFT_SIGN.
IF ETAB-X_AWRD CA '-'. SHIFT ETAB-X_AWRD RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P12R CA '-'. SHIFT ETAB-X_P12R RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P12C CA '-'. SHIFT ETAB-X_P12C RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P13R CA '-'. SHIFT ETAB-X_P13R RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P13C CA '-'. SHIFT ETAB-X_P13C RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDS CA '-'. SHIFT ETAB-X_ITDS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDIC CA '-'. SHIFT ETAB-X_ITDIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDC CA '-'. SHIFT ETAB-X_ITDC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDS CA '-'. SHIFT ETAB-X_YTDS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDC CA '-'. SHIFT ETAB-X_YTDC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDIC CA '-'. SHIFT ETAB-X_YTDIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHS CA '-'. SHIFT ETAB-X_MTHS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHC CA '-'. SHIFT ETAB-X_MTHC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHIC CA '-'. SHIFT ETAB-X_MTHIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDB CA '-'. SHIFT ETAB-X_ITDB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDB CA '-'. SHIFT ETAB-X_YTDB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHB CA '-'. SHIFT ETAB-X_MTHB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_COMM CA '-'. SHIFT ETAB-X_COMM RIGHT CIRCULAR. ENDIF.
ENDFORM.
FORM GRAND_TOTALS.
SKIP 1. .
WRITE: / '----
WRITE: / 'System ID = ', SY-SYSID,
/ 'Client = ', SY-MANDT,
/ 'User = ', SY-UNAME,
/ 'Date of data extract = ', SY-DATUM ,
/ 'Number of Projects = ', COUNT_PROJECTS,
/ 'total Award (Plan 11) = ', TOTAL_AWARD,
/ 'total Auth SalesHi all,
Iam really waiting for someone to see and get the logic right for this code.Iam completely stuck up. i need ur help
Thanks
Maybe you are looking for
-
Restoring MBP with Time Machine but apps are missing
Hi, I have multiple problems, so I'll keep it brief. RAM failed on my early 08 MBP. It corrupted the parttion thing and wiped my HDD. Nice. Apple replaced RAM & HDD under warranty. Have data backed up using Time Machine, but not the apps (I thought I
-
VCORE PROBLEMS WITH MSI P35 NEO F
To see if I can help or at least explain what's happening, buy a MSI P35 NEO F for using a quad, the topic is as follows handling vcore is rare First thing I can not put less voltage that the cpu brings default, second what happens next if bios setti
-
Safari doesn't display some title text on websites properly...
Hi, I get strange problems on Safari. Safari doesn't display title text on some websites. It is replaced with some mathematical fonts like small numbers, figures and etc... But it happens to only title text. All other body text is fine. I thought fon
-
Hi friends, Can any one tell me the steps involved in customization of BP in crm 5.0? In crm 4.0 you have to create the required BP roles you require.But in crm 5.0,I think the roles are already created . Pl tell me the steps involved. Thanks in adva
-
How best to transfer from Powerpoint
I'm a Final Cut Pro video editor but new to Powerpoint and Keynote. I have a project in Powerpoint that I suspect I'll have an easier time with if I can transfer it to Keynote. Are there any tips or warnings about making the transfer? Thanks in advan