Need to release a Fucntion Module.

Hi ,
For creating a BAPI i have created a rfc func module. Is it required that I need to release the fucntion Module.
If released and used for BAPI ,Can I change the code in the func module?
Please give your suggestions.
Neeraj

Hello neeraj,
Once you release any object , no changes are allowed further, So you have to create a new request inorder to change and save the object.
Thanks
RK

Similar Messages

How to extract pick details after pick release with OPM Modules

Hi, Can someone show me how to extract pick details (for third party warehouse) after pick release released in OPM modules?
I remembered that I can access interface tables MTL_TXN_REQUEST_HEADER and MTL_TXN_REQUEST_LINES to extract pick detail. But it seems that in OPM modules, it does not use these two tables. Any help are greatly appreciated.
Calvin

Hi,
This problem Could happen when you referesh quality or test system.
Your delta setup for the related master and transaction data needs to be reinit.
What happens is when you init. the delta and subsequent delta is all maintained in your source system
please check Notes 852443,424848,834229
Hope this helps
Thanks
Teja
Message was edited by:
Teja badugu

Do I need to release UITableViewCell accessoryView in my iPhone app?

The memory management documentation says I need to release objects I create with alloc.
In my case I am creating a custom view (a UIButton) using alloc and assigning to the cell.accessoryView. If I use a temporary object, I need to release it after making the assignment, that I understand, but do I need to include [cell.accessoryView release] somewhere too? Am I still responsible to release the button I've created? If not, why is that?
None of the examples I can find in the Table Programming Guide address this one way or the other.

Hi, you must not release it a second time with
[cell.accesoryView release];
// create a UIButton. Retaincount = 1
button = [[UIButton alloc] initWithFrame:CGRectMake(270, 10, 25, 25)];
// use it as accessoryView (retaincount will be increased by 1)
cell.accessoryView = button;
// release the button. (retaincount will be decreased by 1 back to 1)
[button release];
if you want to "get rid" of the accessoryView in that cell later you just need to
cell.accessoryView = nil;
This will cause the cell to release the button which drops the retaincount to 0

Need name of a function module or BAPI to update the Tax Classification val

Hi Guru's
Need name of a function module or BAPI to update the Tax Classification value for Material master.
Thanks in advance.

Hi
U can try to use BAPI_MATERIAL_SAVEREPLICA
Max

Create Return Order via Fucntional module

Hi all,
I am trying to create a return order with refernce to invoice via fucntional module SD_SALESDOCUMENT_CREATE
In SALES_HEADER_IN, I am giving REF_DOC - Invoice number, REFDOC_CAT - M
In SALES_HEADER_INX , I am putting X mark for the above fields
I am Passing necessary details with material.I see the return order is created succesfully, but the invoice number is not updated in Accounting tab - Reference fields - Header.
Please anyone help me if the values what I have passed is correct or not to create the return order via Functional module
regard
Mano

Hi Mano,
Could you please upload screenshot of the field you are referring to
thanks
santosh

NEED INFORMATION ABOUT "MAX_TEST" FUNCTION MODULE

HI ABAPERS,
I need information about "MAX_TEST" function module . this function module is used in 4.6 version , now system have been shifted to 6.0.....here in 6.0 version this function module is not prasent.can any one tell me which new function module we can use in place of this function module, without changing the functionality........
Thanks in advance
regards,
SUNIL

The module is not very sophisticated. Profficiency in Java or ABAP will be a great bonus here. There are plenty of good materials regarding XI on SDN. I suggest to start with step-by-step guides and master all basic integration scenarios
http://wiki.sdn.sap.com/wiki/display/XI/Step-by-Step+Guides
Opportunities in industry are not bad also, cause PI is rather popular among customers. The best thing is that it fits any type of customer's business. Integration is demanded almost everywhere.

Need a BAPI or function module to do FMZ1 transaction for funds commitment.

Hi,
I need a BAPI or function module to do FMZ1 transaction, please advise.
Regards
Fellow ABAPer.

I think I found it.
If anyone is searching for it too, we will use these one:
CO_ZA_AVAIL_CHK_ORDER_MULTI

Do we need a Library and Develop Module?

Do we really need a Library and Develop module? There's lots of dissatisfaction with Lightroom speed and one of the problem areas is when switching from Library, when in standard preview or 1:1, to Develop and the 'loading' message appears or as on my mac the dreaded spinning beach ball goes crazy. Even with all the previews created it's still slow.
So, if we have a standard preview or 1:1 loaded why can't we automatically be ready to apply any adjustments and save an extra step to another module? The quick develop in the library seems unnecessary and I've never used it. That leaves the metadata and keywording panels requiring a new location, but again these are not something I need to refer to on a regular basis.
Anyone else any similar thoughts?

> ...but I'm pretty darn sure there won't be any back-stepping to REMOVE or substantially alter LR's basic premise...pretty sure Develop will always be about dealing with a single image adjustment (and applying that adjustment to other images if you wish).
And I'm okay with this premise, but it needs additional functionality, such as the ability to apply relative adjustments. It already has this via the keyboard shortcuts while hovering. It just needs a UI adjustment (I once did a mockup of this, and I think it works) and the ability for autosync to recognize them as relative adjustments to the other images.
It also needs additional views. Grid, survey and compare would be nice, but you're only adjusting a single image's RAW data rendering at a time - the others are shown as previews and adjustments to them are rendered that way (like Library does).
The issue is, many people like me end up switching modules far too often. I generally go back and forth between Library and Develop hundreds of times per day. That's way too many times to be suffering the module-switching penalty. I'd prefer to select the images I'm working on in Library, and never see that module again until I'm done working on them. For now, grid and survey are too often needed, and so are relative adjustments.
Develop already has most of the needed functionality. Relative adjustments are already available to one image, a grid is available but only at 1 row (film strip supplied by Library) and a quick-render (the image in the upper left) is available as well. This just needs to be expanded and adjusted so that going back and forth to Library isn't as necessary as it is now. Ideally, you'd import in Library, to your metadata stuff there or in other related modules, choose the image group you want to work on using filters/folders/collections/find, then go to Develop and work on them until you are done.

Copy Standard Fucntion module

Hi,
I am copying the standard fucntion module in R/3. My requirement is i would like to make changes for standard and create the generic. I am getting the Interface error for the function module while copying as it has related Type Group. Can anyone help by providing me the inforamtion how to copy type group for this function group.
Thanks

Sorry, it cannot be an acesskey information because i am copying. It cannot be an authoriation as i have the developer access.
It is the Function Module -> improt tab for the standard function module , they have used type groups which is not getting copied while copying the functiona module. Is there is any way which can help me to resolve this...
I am ware that it is not the ebst practice to copy but i have a small modification hence i was interested in copying rather then creating new,
thanks

Create an new employee fucntion Module/SAP pgm

Hi All,
I would like to know if there is any fucntion module to create an employee in batch program, I do not want to use BDC for PA40 and when I tried using the fucntion module HR_MAINTAIN_MASTERDATA, it is creating the new employee but not creating a record in HRD1001.
Any help is appreciated.

Hi
Refer- http://help.sap.com/bp_hcmv1500/HRBP_Canada_V1_500/HTML/hcm_toc.htm

Help needed with perl Image::Magick module

I don't know if this is the right place to post this (it might belong in the Newbie corner instead), but I'll give it a try.
I need an Image::Magick Perl module (and a load of other modules, which I have found) for a program I desperately need. Now, the only thing I know about Perl is that v. 6 is supposed to be coming out soon - apart from that, I'm blank. The installation is giving me some problems.
The installation guide is somewhat ambiguous. It says:
Next, edit Makefile.PL and change LIBS and INC to include the appropriate path information to the required libMagick library. You will also need paths to JPEG, PNG, TIFF, etc. delegates if they were included with your installed version of ImageMagick.
In the Makefile.PL which comes with the package, these two are defined:
'INC' => '-I../ -I.. -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/X11R6/include/X11 -I/usr/include/libxml2',
'LIBS' => ['-L/usr/lib -lMagick -L/usr/X11R6/lib64 -L/usr/lib -ltiff -ljpeg -lpng -ldpstk -ldps -lXext -lXt -lSM -lICE -lX11 -lbz2 -lxml2 -lpthread -lm -lpthread'],
I haven't changed anything in them, because I haven't got the slightest idea what to change and to what. When I run the installation procedure ('perl Makefile.PL', 'make', and 'make test'), I get an error message during the test (but not before that). Here's the entire output from 'make test':
/bin/sh ../magick.sh PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/bzlib/*.t t/jng/*.t t/jpeg/*.t t/mpeg/*.t t/png/*.t t/ps/*.t t/tiff/*.t t/x/*.t t/xfig/*.t
/bin/sh: ../magick.sh: No such file or directory
make: *** [test_dynamic] Error 127
There is mention somewhere that one might compile the module together with ImageMagick or with Perl, but I don't think I'm ready for that...
Is there anyone skilled in Perl who can tell me what it is that I'm doing wrong, alternatively make a package file...?

I've found two other packages that I needed in AUR, but when I run the make test for the program that I need (fontlinge), it still complains that it can't find the Image::Magick module. I already have the imagemagick package installed, though, that's why I thought I'd have to install and compile the perl module separately.
Here's the output from the 'make test' for fontlinge:
make -C modules
make[1]: Entering directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules'
make[2]: Entering directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules/fontlinge'
make[2]: Leaving directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules/fontlinge'
make[1]: Leaving directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules'
./misc/check_for_modules.pl --skip-fontlinge-module
Ok. Cwd 'abs_path'
Ok. DBI
Ok. User::pwent
Missing Image::Magick
Ok. Getopt::Long
Ok. DBD::mysql
Ok. File::Find
Ok. File::Path
Ok. ExtUtils::MakeMaker
Ok. 5.006
Ok. bytes
Ok. -utf8
It seems some required modules are missing.
How to get missing modules differs from _which_ module you are missing.
You can get modules like DBI from your distributions CD
or search the web for a RPM/DEB/...-file. www.cpan.org is always a good adress.
It may be a good idea to configure your perl-CPAN-Module as ROOT(!!!) by typing
perl -MCPAN -eshell
It is VERY important that you do not just 'su' to root but 'su -' on SuSE linux.
Once you have configured perl, you can install CPAN-modules by
perl -MCPAN -e 'install MODULENAME'
Other modules like Image::Magick require you to have the programs installed
they belong to.
If you are missing a 'fontlinge'-module, you have not installed this
program correctly. :-)
If the missing module begins with a '-' sign this module might miss,
because it is not possible to DEACTIVATE it, i.e. unwanted utf8 encoding.
make: *** [test] Error 255
If this makes sense to anyone, I'd be very happy. (For the record: Fontlinge is - or at least seems to be - the only decent font manager I've found for Linux. This seems to be a gaping, wide open black hole in the Linux world... There's gfontview, opcion, fontpage, and a couple of other minor apps that I've found, but none of them are functional for anything but the most basic operations, and on the whole, there doesn't seem to be much between the KDE font manager - which really makes one wonder how far the KDE people want to go in their emulation of windows... - and the font editor FontForge, which is great as a font editor, but overkill as a viewer, and hardly a manager.)

CU65 Variant Function cannot be released - check function module interface

Hi ,
Getting this error while Releasing the variant Function in CU66. Function Module trigerred by this function is of the same name as well as correctly acitvated and released , but while releasing the Function I get this error : 'Function cannot be released - check function module interface' . Following are two characeteristics that are maintained in the variant function :
1. Customer_Type
2. Maintenance_Contract
While executing the Function Module alone I get Raise Inernal Exception i.e it is not identifying the argument name 'Maintenance_Contract' in the FM 'CUOV_GET_FUNCTION_ARGUMENT' exception
Below is the code for reference . Pls point out if any mistakes :
""Local Interface:
*" IMPORTING
*"     REFERENCE(GLOBALS) TYPE CUOV_00
*" CHANGING
*"     REFERENCE(ZQUERY) TYPE ZQUERY
*"     REFERENCE(ZMATCH) TYPE ZMATCH
*" EXCEPTIONS
*"      FAIL
*"      INTERNAL_ERROR
" Data Declaration
DATA : l_main LIKE CUOV_01-atwrt,
         l_cust LIKE CUOV_01-atwrt.
" Get value of Input Characteristic Maintenance Contract
call function 'CUOV_GET_FUNCTION_ARGUMENT'
    exporting
      argument            = 'MAINTENANCE_CONTRACT'
   IMPORTING
      SYM_VAL             = l_main
    tables
      query               = ZQUERY
    EXCEPTIONS
      ARG_NOT_FOUND       = 1
if sy-subrc <> 0.
RAISE INTERNAL_ERROR.
endif.
" Get value of Input Characteristic Customer Type
call function 'CUOV_GET_FUNCTION_ARGUMENT'
    exporting
      argument            = 'CUSTOMER_TYPE'
   IMPORTING
      SYM_VAL             = l_cust
   tables
      query               = ZQUERY
    EXCEPTIONS
      ARG_NOT_FOUND       = 1
if sy-subrc <> 0.
RAISE INTERNAL_ERROR.
endif.
   IF l_main EQ 'NO'.
    IF l_cust EQ 'CURRENT'.
      l_cust = 'NEW'.
    ELSEIF l_cust EQ 'VAR CURRENT'.
      l_cust = 'VAR NEW'.
     ENDIF.
     ENDIF.
" Set value for the output characteristic
     call function 'CUOV_SET_FUNCTION_ARGUMENT'
       exporting
         argument                      = 'CUSTOMER_TYPE'
         vtype                         = 'CHAR'
         SYM_VAL                       = l_cust
       NUM_VAL                       =
       tables
         match                         = ZMATCH
       EXCEPTIONS
         EXISTING_VALUE_REPLACED       = 1

ZMATCH and ZQUERY are two table types created in SE11 , both of type CUOV_01.

Please, Help me. I need to do Pluse Width Modulation using LabVIEW 7.1

I need to do Pluse Width Modulation (PWM) using LabVIEW 7.1. I have some analog signal e.g. sine-wave, then I want to transform this signal to be PWM signal.
See in Figure,
Now I already make by myself, but it 's not good. Because the frequency of sawtooth is very low, so the PWM signal is not smooth. Please , help me or give me for example.
I will try its.
Attachments:
fig4.gif ‏5 KB

Hello,
I think the problem you're having comes down to how you're using the function. Basically, the frequency input to the sawtooth function is defined poorly in units of cycles/sample. Of course, we're used to seeing frequency defined in terms of samples/second. But remember, all we have in any programming language is data - in this case we have an array of data. The timing information is to be interpreted, and has nothing to do with the data that defines the waveform. What I mean here is, the time per sample in the sawtooth waveform is completely arbitrary and has nothing to do with the sawtooth itself. It will be defined if you physically output that waveform, because you will be writing some number or samples per second - that will define the frequency of the waveform. Thus, when you are working entirely in software, what you fundamentally care about are the number of samples, or perhaps a bit more specifically, the number of samples/cycle (for periodic functions) and also the number of cycles you'd like to define (together these two tell you the total number of samples). Of course, if you know the rate at which your samples will be output, and you know the samples/cycle that you've defined, those to pieces of information tell you the actual frequency that the signal you output will have.
The moral of the story is, when you wired 100 to the f input of the sawtooth function, it was interpreted as 100 cycles/sample, which clearly doesn't make sense because a single sample cannot represent 100 cycles, let alone even a single cycle. Take a look at the attached VI, where all I have done is used the reciprical function to make the front panel input be in units of samples/cycle instead of cycles/sample. This way you can specify the total number of samples and the samples/cycle, and you should have a pretty good feel for how to use the function in the slightly modified form.
I think that clears things up!
Best Regards,
JLS
Best,
JLS
Sixclear
Attachments:
Sawtooth.vi ‏24 KB

Need help with SAP SD module

Hi i am new to this forum, i need help with SAP SD module. Can you please provide me pointers or links to get started SAP SD module and start facing the interviews.

Hi Aditya,
For understanding the SD module itself, the link - http://help.sap.com/saphelp_erp2005/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm is the ultimate one.
Again you can also refer to the mateial "Implementing R/3 S&D BY GLYNN C.WILLIAMS".
For Cracking interview, You can refer to "SAP SD Interview Questions, Answers, and Explanations By: Jim Stewart" which is available in the market.
Regards,
SARTHAK

Regarding Fucntion module for Labor and Machine times

Dear all,
Is there any fucntion module to get the labor and machine times when we give in material and plant.
thanks
J

check the function
SCOV_TIME_DIFF
Import parameters               Value
IM_DATE1                        2008-01-01
IM_DATE2                        2008-01-01
IM_TIME1                        10:00:00
IM_TIME2                        11:30:00
Export parameters               Value
EX_DAYS                         0
EX_TIME                         01:30:00

Need to release a Fucntion Module.

Similar Messages

Maybe you are looking for