Need to remove syles/images via CrystalReportViewer

I am trying to embed a report in the app. I only need the report (minus the toolbar, "main report" tab, printLayout and border gifs)
I was able to remove the
a) toolbar,
b) "main report" tab,
c) partial background style - using setDocumentViewType - webLayout (Thanks Ted)
(I was able to hack and remove it from allInOne.js - but I would rather do it with setDocumentViewType )
I now need to remove
dialogframeleftright.gif, dialogframetopbottom.gif and any other gifs.
How do I achieve this via CrystalReportViewer in XI 3.0/3.1?

In response to below------Thank you Lynn-----Yes, there is a main panel--I will attach----and if you have any further suggestions please let me know--Thanks again
How are you running this program? Is there a top level vi which calls the ones you posted? The Display image on screen.vi will display two images in succession, but according to the note on the block diagram the second image is blank. It seems as though this would intentionally create a flicker.
The sequence structure is unnecessary. Dataflow will determine the order of execution. The only exception is the time delay in the third frame. Since it has no data dependency, a single frame sequence may be useful to assure that the delay occurs before the picture is updated. A simple state machine might be a more versatile architecture for what you may be trying to do.
It is not necessary to write the FR.PanelBounds property immediately after reading it, nor is it necessary to read it a second time in the second frame. Just wire from the first read.
Lynn
Attachments:
Main Front Panel with Rendv Final Nov 6 with pause.vi ‏755 KB

Similar Messages

Need to get rid of flicker in between image displays--the PC in which LabVIEW 8.2 is installed is routing images via LaVIEW code & 'extended desktop' to typical visual projector and between each image display is a flicker--that we need to remove

Need to get rid of flicker in between image displays--the PC on which LabVIEW 8.2 is installed is routing images via LabVIEW code & 'extended desktop' to a typical visual projector and between each image display is a flicker--that we need to remove
Attachments:
Get JPEG Files in the folder.vi ‏13 KB
Display image on the screen.vi ‏34 KB
Create image file path.vi ‏12 KB

In response to below------Thank you Lynn-----Yes, there is a main panel--I will attach----and if you have any further suggestions please let me know--Thanks again
How are you running this program? Is there a top level vi which calls the ones you posted? The Display image on screen.vi will display two images in succession, but according to the note on the block diagram the second image is blank. It seems as though this would intentionally create a flicker.
The sequence structure is unnecessary. Dataflow will determine the order of execution. The only exception is the time delay in the third frame. Since it has no data dependency, a single frame sequence may be useful to assure that the delay occurs before the picture is updated. A simple state machine might be a more versatile architecture for what you may be trying to do.
It is not necessary to write the FR.PanelBounds property immediately after reading it, nor is it necessary to read it a second time in the second frame. Just wire from the first read.
Lynn
Attachments:
Main Front Panel with Rendv Final Nov 6 with pause.vi ‏755 KB

HT201269 ibook stopped transferring images via image capture. last month it worked. i hav an old ibook and i cannot update to newest itunes. which is fine. however, i need the image capture to take photos off my iphone 5. no, i dont want to use i cloud.

ibook stopped transferring images via image capture. last month it worked. i hav an old ibook and i cannot update to newest itunes. which is fine. however, i need the image capture to take photos off my iphone 5. no, i dont want to use i cloud. i would actually like to just plug it in to the usb drive the old fashioned way

I don't believe the iOS7 update was the cause for your issue. I have three devices all updated and they all show the Import To drop menu in Image Capture as shown below.

Is some driver needed when I want to use Matrox card to aquire image via Labview?

Is some driver needed when I want to use Matrox card to aquire image via Labview？and I cannot afford the expense of buying a driver made by alliancevision。 If there must be some driver installed before I acquire image, can anyone email me one? Or just give me some advices. My email address is [email protected]
The attachment is my VI by which I attempt to acquire image, and I don't know what is the problems in it and whether it is because of the lack of the driver.
Attachments:
method2.vi ‏19 KB

You asked the same question here under a different user ID.
Asking for someone to email you something that you must purchase is called software piracy. Nobody on this forum will help you with that.

How can I remove an image from its background and save it? (Photoshop cs6)

Hello,
I am very new to the photoshop world and am trying to remove an image from its background ( as a stand-alone) and save it. Is there a way to do this in Photoshop CS6? I have looked at tutorials but only found how to remove the image but not how to save the image as a stand alone with no background.
Any help would be appreciated
Erika

Hi Erika,
Are you trying to save a portion of an image with a transparent background? It may help to post a screenshot of the image that you're working with as well as your layers panel.
I've included a few tips below that may help you with your situation. If you need additional help, please feel free to post again
Deleting a background and saving an image with a transparent background
1. Here I am working with an image of a santa hat that I've cut out from a white background. I have two layers, the cut-out santa hat and the original file. I'm going to delete the background layer so that I have just one layer - the cut-out santa hat:
2. You'll see that a checkerboard pattern has appeared behind the santa hat. This means that the background is transparent.
3. You can then go to File > Save As... and select PNG, Photoshop PSD, or TIFF from the Format dropdown menu. These file formats will save the cut-out portion of your image on its own, while preserving the transparent background.

Need Help Removing Background

I need help removing a background from a picture. My boss wants some t-shirts made but the only image I have is one with a tie-dye background and I need it to just be the black and white that is on the image. I have been trying for 2 weeks to do this and I can get real close but it leaves the colors around the edges and I need this gone. Any ideas? Anyone that can help me out? I have the original photo and the one with almost everything removed if someone can help me fine tune the rest that would be great.

You've done all the hard work and are almost there!
Starting with your b/w rendition, duplicate the background layer, and shut off the visibility of the background layer. Work on background copy layer
Go to Enhance menu>convert to black and white>vivid landscape style
Open a blank layer between the background and background copy layers and fill this layer with white
Make the background copy layer active and use the eraser tool to clean up a few smudges on the background copy layer
Open a blank layer at the top of the stack, and press CTRL+SHIFT+ALT+E to create a stamp visible layer
With the rectangular marquee tool, make a rectangular block selection of "DRIVE-IN THEATRE" and place this on its own layer (CTRL+J). Make the blending mode multiply, then duplicate this layer 3-4 times.
For the text on the bottom, suggest that you erase this and replace the information with the type tool.

Need to send Smart form via email through Driver program

Hi All,
We need to send smart form via email through a new driver program (z program). Can you please guide me on this.
I have used the following code to achieve this. We are getting message saying 'Mail request has created' when executed, but the mail is not sent.
lvs_comm_type = 'INT'.
lvs_comm_values-adsmtp-SMTP_ADDR = e_mail.
lvs_comm_values-adsmtp-R3_USER = 'X'.
lvs_comm_values-adsmtp-ENCODE = '0'.
call function 'CONVERT_COMM_TYPE_DATA'
exporting
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_screen = ' '
pi_newid = 'X'
importing
pe_itcpo = lvs_itcpo
pe_device = lvf_device
pe_mail_recipient = p_mail_recipient
pe_mail_sender = p_mail_sender
exceptions
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
others = 4.
if sy-subrc ne 0.
raise COMMUNICATION_ERROR.
endif.
control_parameters-device = 'MAIL'.
output_options-TDIMMED = 'X'.
output_options-TDDELETE = 'X'.
CALL FUNCTION fm_name
exporting
CONTROL_PARAMETERS = control_parameters
MAIL_RECIPIENT = mail_recipient
MAIL_SENDER = mail_sender
OUTPUT_OPTIONS = output_options
USER_SETTINGS = space
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
Thank you

Hi,
For sending smartform output into mail you first have to generate spool request and convert it into PDF and then
only it can be sended into mail, please find the sample code in the mail below:
http://wiki.sdn.sap.com/wiki/display/sandbox/ConversionofSpoolRequestDataintoPDFandExcelFormatandSenditintoMail
Mansi
Edited by: Matt on Jan 29, 2010 8:25 AM - removed code, instead point to wiki that Mansi authored.

Need to remove white background for use on dark background

Hi,
I have a stock image of some people on a white background. I need to remove the white background so I can use the image in a project with a dark background. However when I put the edited subjects on the dark background, the people all have noticeable white borders around them which I assume means I am not getting all of the white out, especially around the hair. Can anyone recommend the best way of overcoming this? Thanks.

Can anyone recommend the best way of overcoming this? Thanks.
There is no single "best way". It all depends on the resolution of the image and its other quality properties. The - theoretically - cleanest and less workladden method would be to extract the luminance e.g. by converting to Lab mode and selecting the L channel, then adjust the channel range. However, if the foreground also contains lots of bright colors, clipping back the channel black and white points would also affect them and you'd need more adjustments to compensate or work with teh refine mask tool a lot to feather edges just like you would with a conventioan layer mask created from an interactive selection. On top of that you may also still need to apply all teh other dirty tricks like using a dark inner glow to cover up remaining bright areas or fill the outside with a dark color... Really depends, but you should be prepared to invest some time. Using longwinded manual painting and cloning may even be required...
Mylenium

Need to remove sun glare

Hello,
There is background sun glare over the top of this young man's forehead and hair. I obviously need to remove as much of it as possible. I have experimented with Shadows/Highlights, Levels, Curves and the Burn tool. It seems that the latter gives the best results. One problem I've encountered is that it seems I cannot use the Burn tool on a separate layer above the photo's layer (as one could with the Clone tool, sampling all layers). Perhaps I am doing something wrong. I am using PS 6.
Any pointers would greatly be appreciated. This photo will be for this man's memorial service so I have to get it as best I can. I am uploading only a screen shot, the original is 300 dpi.
Thanks.
Tom

That's pretty bad and will never look right but try these steps to minimize that glare...
Open the photo in Photoshop
Open the Channels tab in the Layers Panel
Control Click on the RGB Composite Channel's tiny image Icon. That selects all the luminosity of the photo.
Switch back to LAYERS tab and you'll see crawling ants on all the Luminosity parts of the picture.
Now do CTRL + J to put that selection on Layer 1
Set Layer 1's blend mode to MULTIPLY.
Then Flatten Layers
Then do all the usual image fix ups to make a better image.
I think CS6 can do all those steps.
Joe

Viewing images via Bridge CS3

I usually adjust images in Aperture but have just begun to use the Raw converter within CS3 for a few files. I can export master files onto my desktop and dbl click to open the NEF file, however, this seems very clumsy. I know you can access the RAW images via Bridge CS3 but when I try to access all I get is the aperture library white icon (looks like a fridge?!) but when I ask to display contents it seems to be locked - my aperture library is situated in Pictures - but this still does not allow access - anyone know - thanks to anyone who does !

thank you - yes, I agree I would prefer to not bother with Bridge, but when I "Open With" which I had defaulted to PSCS3, this opens fine, but the master file opens in tif or psd depending on what I need, and then of course the ACR dosn't open- I think I may be thrown a bit here by your comment on "referenced" master files - but however, at least I do follow you clearly on the tif/jpeg import concerning reflection of changes - really appreciate your time!

Removing Edited Images & Remembering Changes when importing back into the Lightroom

I'm looking for the following solution:
I would like to
1- edit raw or jpg files in lightroom,
2- remove the images from the lightroom library.
3- import them back when needed with changes and ratings, basically with all the changes being remembered.
How can I make import back the images, including the changes I made to them?
Please help & email me too if possible.
Thanks,
Alexander
photorama [at] gmail.com

Could you describe what you mean by removing images from the library? To some it means deleting from the database and trashing the actual image; to others it means removing the info and pointer to the file in LR but leaving the image in place; still others - possibly you- mean it to remove the images but leave the database and Previews.
 
 

 color="#600000" size="2">~~ John McWilliams
 
 
 
 MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8; Canon DSLRs

Do I need to remove Bootcamp Partition before restoring with Time Machine

Hello - anyone familiar with this scenario.
I have used TIME MACHINE from the very first day I had my iMac. So it was started almost immediately after the initial boot of a brand new iMac case I ever needed to restore my Mac to that initial Day 1 state.
That day has come, but it's now two years, and in that time I have installed BOOTCAMP, Parallels and Windows 7. That process created another partition, and created the required 'links' between my OSX and Windows via Parallels etc.
So my question is this - can I do a 'Restore from Time Machine' over the top of the new partioned set up of my iMac OR or will it be now totally confused because of the changes I have made to my system in that time, and do I firstly need to remove Windows, Bootcamp, and erase the partitions I created back to one.
So in summary - will Time Machine do this when it restores, or do I need to do it before I restore?
I also have a CARBON COPY CLONE from Day 1 too. Am I better using that instead - and if so, same question - will i need to remove Windows, and my Bootcamped partion first?
(My system is iMac late 2012 still running OSX Mountain Lion if that makes any difference)
Thanks

popsynic wrote:
Hi - thanks for responding
"Is Parallels using the BC partition as a VM, or is it a separate VM with its own virtual disk?"
I don't know - basically I have a BOOTCAMP partition and Windows is installed on that (using these instructions from the Parallels website) I can then either open up Windows from in OSX Moutain Lion while keeping my mac running (and windows will run in its own little window - but within OSX. OR I can also choose to boot dircetly wi windows when I tuen on my MAC - and then it runs independently of my OSX.
You are using the BC Windows and running it as VM. There is no separate VM with virtual disk.
"Are you planning to erase the internal drive(s)?"
I wasn't sure - I want to restore my iMac like it was on the day I had it, before I partitoned BOOTCAMP and installed windows. So my question is, will the TIME MACHINE restore get rid of WINDOWS and the BOOTCAMP partition for me as part of its restore - or do i have to that, and then restore using Time Machine
It is much simpler to run BC Assistant and use the last option - "Remove Windows". It is a bit cleaner.
"If the backup on TM which started on Day 1 has continued as you have made changes, including BC/Windows/Parallels, it has continued to backup OS X and partition information. I suggest you backup Windows using Windows Backup to a separate external drive formatted as NTFS, and also consider Winclone or CampTune for a OS X compatible BC backup, if you run into any issues."
As above, I am not bothered about keeping Windows or the BOOTCAMP partition, I want to resore my iMac to the DAY 1 status - when I did my first full Time Machine backup - which was before I created a Bootcamp partition or installed Windows.
I suggest removing Windows via BCA and backing up to Time Machine. You will keep you OS X intact and keep all your files on the OS X side.

Do I need to remove Bootcamp before Time Machine Restore?

Hello - anyone familiar with this scenario.
I have used TIME MACHINE from the very first day I had my iMac. So it was started almost immediately after the initial boot of a brand new iMac case I ever needed to restore my Mac to that initial Day 1 state.
That day has come, but it's now two years, and in that time I have installed BOOTCAMP, Parallels and Windows 7. That process created another partition, and created the required 'links' between my OSX and Windows via Parallels etc.
So my question is this - can I do a 'Restore from Time Machine' over the top of the new partioned set up of my iMac OR or will it be now totally confused because of the changes I have made to my system in that time, and do I firstly need to remove Windows, Bootcamp, and erase the partitions I created back to one.
So in summary - will Time Machine do this when it restores, or do I need to do it before I restore?
I also have a CARBON COPY CLONE from Day 1 too. Am I better using that instead - and if so, same question - will i need to remove Windows, and my Bootcamped partion first?
(My system is iMac late 2012 still running OSX Mountain Lion if that makes any difference)
Thanks
OS X Mountain Lion (10.8.4), i7 / 3TB Fusion Drive / 24GB Ram

popsynic wrote:
Hi - thanks for responding
"Is Parallels using the BC partition as a VM, or is it a separate VM with its own virtual disk?"
I don't know - basically I have a BOOTCAMP partition and Windows is installed on that (using these instructions from the Parallels website) I can then either open up Windows from in OSX Moutain Lion while keeping my mac running (and windows will run in its own little window - but within OSX. OR I can also choose to boot dircetly wi windows when I tuen on my MAC - and then it runs independently of my OSX.
You are using the BC Windows and running it as VM. There is no separate VM with virtual disk.
"Are you planning to erase the internal drive(s)?"
I wasn't sure - I want to restore my iMac like it was on the day I had it, before I partitoned BOOTCAMP and installed windows. So my question is, will the TIME MACHINE restore get rid of WINDOWS and the BOOTCAMP partition for me as part of its restore - or do i have to that, and then restore using Time Machine
It is much simpler to run BC Assistant and use the last option - "Remove Windows". It is a bit cleaner.
"If the backup on TM which started on Day 1 has continued as you have made changes, including BC/Windows/Parallels, it has continued to backup OS X and partition information. I suggest you backup Windows using Windows Backup to a separate external drive formatted as NTFS, and also consider Winclone or CampTune for a OS X compatible BC backup, if you run into any issues."
As above, I am not bothered about keeping Windows or the BOOTCAMP partition, I want to resore my iMac to the DAY 1 status - when I did my first full Time Machine backup - which was before I created a Bootcamp partition or installed Windows.
I suggest removing Windows via BCA and backing up to Time Machine. You will keep you OS X intact and keep all your files on the OS X side.

Remove ALL Images from PDF Export?

I'd like to remove ALL images from a PDF export (Indesign CS6), with the intention of having the smallest file size possible for review. All the images are Photoshop PSDs.
I have created a PDF Preset (PDF 1.7) that omits EPS, PDF and Bitmap.
That covers any PSDs that contain opaque backgrounds, i.e. are considered to be non-transparent. However, any PSDs that do NOT contain such backgrounds still appear in the exported PDF. I assume they are NOT considered to be Bitmaps?!?
I've gone for maximal compression of images (in the Preset) also just to see how small I can get the file, but it's still over a meg, and I'd really like even smaller. I live in a rural part of England where net access is painfully slow, and even a few meg of data takes far too long to upload, not to mention the constant drop-outs. Consider further that my document is likely to grow by several orders of magnitude and hopefully you can see why I'd like to sort this issue out as soon as possible.
I've not done any scripting but assume it would be trivial to hide images with a script. However, I'm not sure how such a script might know how to make visible only the images that were previously hidden by the script. Obviously I would not wish to unhide images that must stay hidden. Maybe some form of image/object tagging, if that's even possible in this product, i.e. tag them "temp hide" on first pass of the script, and so forth.
Any suggestions much appreciated.
Regards,
James

@James – to mark the container frames of the nonprinting images by a fill color, you could add the following lines of code in the for loop:
allGraphicsArray[n].nonprinting = true;
//The parent of the graphic is the container that holds it.
//We could use it to fill it with a tint of e.g. 20% of black:
allGraphicsArray[n].parent.fillColor = "Black";
allGraphicsArray[n].parent.fillTint = 20;
But this approach will add a new problem for images, that only use a portion of the holding graphic frame. Or are only partly visible due to a clipping path or a clipping mask or totally transparent areas due to transparent pixels.
Already colored backgrounds will be recolored…
@Sandee – I see the advantage of the PostScript to Distiller way in this situation, but there are two disadvantages:
1. Live transparency will be flattened (could be no issue in this use case, but you never know).
2. The gray area with the big X will be applied also to parts of the images where no pixels are present (transparent pixels in PhotoShop or TIFF files).
To work around all these issues we need a more complex script that is building a path object around the transparent parts of an image or using an applied clipping path for that purpose and fill that with a gray tint (and maybe with an X).
Here some screen shots to illustrate the problems (with or without using PostScript/Distiller):
1. Original set up:
One placed PhotoShop file with transparency stacked upon the text frame.
The image inside its holding frame is selected.
The visibility of one of its layers depicting a second chair on the left side is switched off.
2. The same setup in a different view:
3. After running the script with the two additional lines of code:
Using the PostScript method would do nearly the same plus adding a cross using the area of the selected image.
Uwe

Illustrator CS4 no longer allows me to paste images "Quicktime and a decompresser are needed to view this image". How do I fix this?

Since I installed the Yosemite Mac software upgrade, my Illustrator CS4 no longer allows me to paste images. I get the message "Quicktime and a decompresser are needed to view this image". How do I fix this? I've tried everything, nothing works!!!!

Did you use migration with the new OS or did you reinstall the CS4 apps from the original media? If you didn't, then you should uninstall CS4 making sure to check the box to remove preferences, run the Cleaner tool (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall CS4. CS4 is totally untested and unsupported on the latest versions of Mac OSes.

Need to remove syles/images via CrystalReportViewer

Similar Messages

Maybe you are looking for