Need to validate selection screen parameter valus

Hi all,
we have a requirement to validate parameter values ,
parameter values should be less than or equal to 12 and should accept 2 decimals .
how to declare parameter?
eg: 11.34, 12.00
regards
sridhar

should accept 2 decimals .
PARAMETERS : p1 type p DECIMALS 2.
this automatically comes with validation.
and for less than 12, keep logic in at selection-screen event.
both AT SELECTION-SCREEN. and AT SELECTION-SCREEN. on p1 works.
AT SELECTION-SCREEN.
IF p1 > 12.
MESSAGE 'Provide values less than 12' type 'E'.
ENDIF.
and
AT SELECTION-SCREEN ON p1.
IF p1 > 12.
MESSAGE 'Provide values less than 12' type 'E'.
ENDIF.
the difference between these tow is the later displays the error on that particular field (useful when you have multiple fields in selection screen)
hope this helps.
Somu
Edited by: soumya prakash mishra on Jul 31, 2009 8:01 AM

Similar Messages

Need help on selection screen optation

1)PARAMETER: P_DETAIL RADIOBUTTON GROUP G1 DEFAULT 'X'.
2)PARAMETER: P_SUMM RADIOBUTTON GROUP G1
3)SELECT-OPTIONS: S_PGI FOR ZAPDDLIV-ZDATE
i have 2 parameters depending on parameter i need to accept selection screen for parameter 1 accept data in dd.mm.yyyy. and for parameter need to accept only mm.yyyy
only
need help on this selection criteria..

Hi Anil,
It is very much possible. Use Modif ID concept. First dont display any date, depending on radio button selected display date in which ever form u need.
See the sample coding for Modif id.
PARAMETERS: test1(10) TYPE c MODIF ID sc1,
            test2(10) TYPE c MODIF ID sc2,
            test3(10) TYPE c MODIF ID sc1,
            test4(10) TYPE c MODIF ID sc2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'SC1'.
      screen-intensified = '1'.
      MODIFY SCREEN.
      CONTINUE.
    ENDIF.
    IF screen-group1 = 'SC2'.
      screen-intensified = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Dont forget to reward points if found useful.
Thanks,
Satyesh

SQ01 - need to change selection screen text of parameters

I am using KNA1 table in my SQ01(Abap query) and am having Kunnr as the selection screen parameter .The default text of Kunnr coming from KNA1 is 'customer number 1'.I need to change this to show it as 'customer number'.
I changed the text in infoset in long text and header value,but it still does not work out. Any suggestions ??.Pls let me know.

Hi,
When you define the selection screen fields in the info set..There will be text box for selection text..There you can give the text..
I tried this..And it worked for me..
Thanks,
Naren

F4 help for a selection screen parameter with filename created dynamically

Hi All,
          I have a requirement where in an F4 help should be present for a selection screen parameter. After selecting the filepath and clicking OK button on the Dialog, the filename should be dynamically get created in the selection screen parameter field. For example:
if the path is D:\DOCS then at the end of DOCS the filename should automatically get populated.
Like below string:
D:\DOCS\new.txt
Is there any function module or method which does this kind of activity.
Thanks in advance,
Deepak

this code will help:
FORM get_filename CHANGING p_filename.
DATA      : lv_filename TYPE string,
              lv_rc TYPE i,
              li_filetable TYPE filetable.
CONSTANTS : lc_fname TYPE string VALUE 'ZRPP4000.XLS',
              lc_fpath TYPE string VALUE 'C:\',
              lc_extn TYPE string VALUE 'XLS'.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      default_filename        = lc_fname
      initial_directory       = lc_fpath
      default_extension       = lc_extn
    CHANGING
      file_table              = li_filetable
      rc                      = lv_rc
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4
      OTHERS                  = 5.
IF sy-subrc = 0 .
    READ TABLE li_filetable INTO lv_filename INDEX 1.
    IF sy-subrc = 0.
      p_filename = lv_filename.
    ENDIF.
ENDIF.
REFRESH li_filetable.
CLEAR:lv_filename.
ENDFORM.                    "get_filename
" p_filename is selection screen parameter

How to Remove the underline from the selection screen parameter

How to remove the underline from a selection screen parameter ?

>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'.

Add selection-screen parameter in HUMO

Hi everybody,
I need to add selection-screen parameters in transaction HUMO.
I tried to create an new specific program with a subscreen. This subscreen is a copy of subscreen 2050 of program RHU_HELP and I had my news parameters to it.
But the problem is that I don't know how to call my subscreen instead of subscreen 2050.
I see in debug the structure ORDER_CRITERIA which contains the value of program and screen but there is no enhancement point in "AT-SELECTION-SCREEN OUTPUT" so I can't replace the program and screen values by my specifics.
I set it in the "INITIALIZATION PART" but it function only one time so it is not good.
Have you an idea to solve my problem or another way to add news selection-screen parameters in HUMO?
Thanks for your help.

Hi Dixitha,
Use implicit enhancement option.
Desplay the report in se38.
In Menu, go to Edit > Enhancement Operations > Show Implicit Enhancement Options.
The system will show you lines (in color) where you can add your enhancement.
This function will allow you to add business rules, substitute fields, do extra calculations, and other unique, non-standard requirements.
Reddy

Calling another report by passing selection screen parameter

Hi,
I have created a report "ZREPA" with selection screen parameter say, "creator".
Nw, i hv to call that report "ZREPA" from another report say "ZREPB" by passing an value to the selection screen field "creator".
Can anyone tell me how to resolve this??
Thanks,
Aaru.

Hi,
You can call one selection screen from other selection screen program using SUBMIT command.
The syntax is as follows -
codeSUBMIT... VIA SELECTION-SCREEN
USING SELECTION-SET <var>
WITH <sel> <criterion>
WITH FREE SELECTIONS <freesel>
WITH SELECTION-TABLE <rspar>.[/code]
e.g.
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
codeREPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.[/code]
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
rspar TYPE TABLE OF rsparams,
wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
/ 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
WHEN 4.
seltab-sign = 'I'. seltab-option = 'BT'.
seltab-low = 1. seltab-high = 5.
APPEND seltab.
SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
WITH paramet eq 'Selection 1'
WITH selecto IN seltab
WITH selecto ne 3
AND RETURN.
WHEN 5.
wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
wa_rspar-low = 14. wa_rspar-high = 17.
APPEND wa_rspar TO rspar.
wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
wa_rspar-low = 'Selection 2'.
APPEND wa_rspar TO rspar.
wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
wa_rspar-low = 10.
APPEND wa_rspar TO rspar.
SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
AND RETURN.
ENDCASE.
=> To leave a called program, you can use SUBMIT .... AND RETURN. by choosing F3 or F15 from list level 0 of the called report.
Regards,
Omkaram.

Selection screen parameter

hi friends,
for the below given description i have to create selection screen parameter .
can u suggest how to solve this.
#times excess qty
Default value: If control class-pseudo no.1 = "NonCtrl then value = 3 Else value = 2. User able to change the default value.
regards,
siri.

HI Raj,
fromm the below PSEUDO CODE i have retrived ALNUM . but the values of this ALNUM has to be moved to the parameter in selction screen. my doubt is how can i do this one is in AT SELECTION SCREEN AND ONE IN DATA SELECTION IS IN START-OF-SELECTION.
1. Control Class: Write Ctr Vault if MAEX-ALNUM(export control class) = ("CNTROL2" or "CNTROL2N") and Write Ctrl Cage if MAEX-ALNUM = ("CNTROL3" or "CNTROL3N" or "CNTROL4" or "CNTROL5") else Write NonCtrl where MATNR=VBAP-MATNR and match with the user-specified input in selection criteria (see section 5).
REGARDS,
SIRI.

How do I add a selection screen parameter to get a application server file

Hi All..
Can you please suggest how can we add a selection screen parameter to get a application server file ?
Thanx in Advance...
Regards,
Deepak

Parameter def :
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 02(30) text-005 FOR FIELD p_xlfil.
PARAMETERS: p_xlfil LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Browse
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xlfil.
PERFORM ws_get_filename USING p_xlfil.
FORM ws_get_filename USING p_xlfil.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 def_path = 'C:'
 mask = ',Excel,*.xls,All,*.*.'(100)
 mode = 'O'
 title = 'Title'(101)
 IMPORTING
 filename = p_xlfil
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
IF sy-subrc NE 0.
 CLEAR p_xlfil.
ENDIF.
ENDFORM. " WS_GET_FILENAME
Regards
Oops i did not read "application server"
Use FM F4_FILENAME_SERVER and not F4_FILENAME/WS_GET_FILENAME.
Message was edited by:
 Raymond Giuseppi

Help Needed in At selection screen output

Hi Experts,
I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
Thanks in advance for all your help.

example from a checkbox in one of my progs..but you can do same approach with radio butts
parameters p_test as checkbox default abap_on user-command test.
at selection-screen.
    if sy-ucomm = 'TEST'.
      perform birth_mnth_chck.
    endif.

Getting parameter id in the selection screen parameter

Hi,
There are few fields in my selection screen. I need to set the parameter id of warehouse number such that the value in the user profile should get displayed by default when the user executes the report.. The parameter id is /scwm/lgn . How do I get it? Please advise.
I have my parameter as follows:
parameter: p_lgnum TYPE /sapapo/matio_wm-lgnum obligatory.
Moderator message: please read F1-help for "parameters", section "value options".
Edited by: Thomas Zloch on Jan 19, 2012

not enough research..
Parameter: p_lgnum TYPE /sapapo/matio_wm-lgnum MEMORY ID /scwm/lgn .
press F1 and see how it works

How to put a value in a selection screen parameter

how do i forcefully put a value to a field in the selection screen.
i mean during runtime.
and it's a parameter not a selection-option.
thanks

Hi,
Check this sample code.It can help you.Basically you need to use 'DYNP_VALUES_READ' in at selection-screen on value-request for s_posnr-low.
tables : vbap. " Sales Document: Item Data
 Constant Declaration *
CONSTANTS:
C_X TYPE C VALUE 'X'. " Translate to Uppercase
 Variable Declaration *
Variable for Table index
data v_sytabix like sy-tabix.
Variable for Program name
data L_NAME LIKE SYST-REPID.
Range for getting values form selection screen
DATA: BEGIN OF range1 OCCURS 0,
 SIGN(1),
 OPTION(2),
 LOW LIKE vbap-vbeln,
 high like vbap-vbeln,
 END OF range1.
Internal table for Report output
data: begin of i_vbap occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of i_vbap.
Internal table for output to the F4 help
data: begin of I_DISPLAY occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of I_DISPLAY.
Internal table for return value form function module
DATA: BEGIN OF I_RETURNVAL OCCURS 0.
 INCLUDE STRUCTURE DDSHRETVAL. " Interface Structure Search
DATA: END OF I_RETURNVAL.
Internal table for F4 help field heading
DATA: I_FIELDTAB LIKE DFIES OCCURS 0 WITH HEADER LINE.
Internal table for getting screen values from selection screen
data L_SCR_FIELDS LIKE DYNPREAD OCCURS 1 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME title text-001.
select-options:
 S_VBELN for vbap-vbeln no intervals,
 S_POSNR for vbap-posnr no intervals.
SELECTION-SCREEN end OF BLOCK B1.
at selection-screen on value-request for s_posnr-low.
clear: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
refresh: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
L_NAME = SYST-REPID.
MOVE 'S_VBELN-LOW' TO L_SCR_FIELDS-FIELDNAME.
APPEND L_SCR_FIELDS.
Call the Function module DYNP_VALUES_READ to get the values form
selection screen
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = L_NAME
 DYNUMB = SYST-DYNNR
 TRANSLATE_TO_UPPER = C_X " X
 TABLES
 DYNPFIELDS = L_SCR_FIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11
IF SY-SUBRC eq 0.
 LOOP AT L_SCR_FIELDS.
 range1-sign = 'I'.
 range1-option = 'EQ'.
 range1-low = L_SCR_FIELDS-FIELDVALUE.
 range1-high = space.
 append range1.
 ENDLOOP.
ENDIF.
F4 help Field headings
I_FIELDTAB-TABNAME = 'I_DISPLAY'.
I_FIELDTAB-FIELDNAME = 'VBELN'.
I_FIELDTAB-POSITION = '1'.
I_FIELDTAB-OUTPUTLEN = '10'.
I_FIELDTAB-INTTYPE = 'C'.
I_FIELDTAB-INTLEN = '10'.
APPEND I_FIELDTAB.
I_FIELDTAB-FIELDNAME = 'POSNR'.
I_FIELDTAB-POSITION = '2'.
I_FIELDTAB-OFFSET = '10'.
I_FIELDTAB-OUTPUTLEN = '6'.
I_FIELDTAB-INTTYPE = 'N'.
I_FIELDTAB-INTLEN = '6'.
APPEND I_FIELDTAB.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_display
 where vbeln in range1.
Call the function module F4IF_INT_TABLE_VALUE_REQUEST for F4 values
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'POSNR'
 WINDOW_TITLE = 'Line Item'
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = C_X " (for muliple selection)
 TABLES
 VALUE_TAB = I_DISPLAY
 FIELD_TAB = I_FIELDTAB
 RETURN_TAB = I_RETURNVAL
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
Star for For single values
READ TABLE I_RETURNVAL INDEX 1.
 S_POSNR-LOW = I_RETURNVAL-FIELDVAL.
End for the single values
Start For multiple selection
 loop at i_returnval.
 s_posnr-sign = 'I'.
 s_posnr-option = 'EQ'.
 s_posnr-low = I_RETURNVAL-FIELDVAL.
 append s_posnr.
 endloop.
 sort s_posnr.
 read table s_posnr index 1.
End for multiple selection
ENDIF.
 Start-of-selection *
start-of-selection.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_vbap
 where vbeln in s_vbeln
 and posnr in s_posnr.
if the above selection is successful continue the process else exit *
form the report
if sy-subrc ne 0.
 message e002 with 'No data to display'.
endif.
end-of-selection.
if not i_vbap[] is initial.
 loop at i_vbap.
 write:/ i_vbap-vbeln, i_vbap-posnr.
 endloop.
endif.

To fill selection screen parameter with user's parameter id

Hi,
I need to display PLANT on the selection screen of a report as SELECT-OPTIONS.
When launching the transaction for the report, the program must fill the PLANT by default with the user's own parameter id (WRK) .
How can it be done?
Regards
Nishant

HI nishant,
in INITIALIZATION EVENT.
1. first get the parameter id value
in some variable of type plant.
(eg p1)
2. then (suppose the select option name is myplant)
MYPLANT-SIGN = 'I'.
MYPLANT-OPTION = 'EQ'.
MYPLANT-LOW = p1 . "<---- from above variable in point 1
APPEND MYPLANT.
regards,
amit m.

WD application-selection screen - Parameter passing error

Hi,
In my WD application selection screen I am using a parameter(COSP-VERSN)
When i read this using read context i am getting an error saying "Could not find attribute KOKRS"
In context I have created a node with COSP-VERSN. My Kokrs will be contstant everytime.
For getting my version I need to pass KOKRS values.How can overcome this issue?
Here is the read context for versn which I have created in context Create-> NODE Option
DATA lo_nd_pversn TYPE REF TO if_wd_context_node.
 DATA lo_el_pversn TYPE REF TO if_wd_context_element.
 DATA ls_pversn TYPE wd_this->element_pversn.
* navigate from <CONTEXT> to <PVERSN> via lead selection
 lo_nd_pversn = wd_context->get_child_node( name = wd_this->wdctx_pversn ).
* get element via lead selection
 lo_el_pversn = lo_nd_pversn->get_element( ).
* get all declared attributes
 lo_el_pversn->get_static_attributes(
 IMPORTING
 static_attributes = ls_pversn ).
Rgds
Vara

Resolved myself by creating a custom Dropdownbykey.
Rgds
vara

Adding f4-help to selection screen parameter field

Hi all.
I need to add search help to a parameter field on selection screen:
PARAMETERS:
 p_reciv LIKE soos7-recnam.
What is the easiest way?
tia, regards

You can give F4 help by two ways:
1. Using internal table
2. Refering db table field.
Following are e.gs:
F4 help using internal table example:
DATA: BEGIN OF LI_FABGRP OCCURS 0,
FABGRP LIKE ZAPO_FABGRP-FABGRP,
BEGDA LIKE ZAPO_FABGRP-BEGDA,
END OF LI_FABGRP.
DATA : T_RETURN TYPE STANDARD TABLE OF DDSHRETVAL WITH HEADER LINE,
L_RETFIELD TYPE DFIES-FIELDNAME.
parameters : S_FABGR like ZAPO_FABGRP-FABGRP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_FABGR.
SELECT FABGRP BEGDA FROM ZAPO_FABGRP INTO table LI_FABGRP.
SORT LI_FABGRP BY FABGRP ASCENDING BEGDA DESCENDING.
Henter de mulige fabriksgrupper med nyeste BEGDA *indenfor hver
DELETE ADJACENT DUPLICATES FROM LI_FABGRP COMPARING FABGRP.
L_RETFIELD = 'FABGRP'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = L_RETFIELD
DYNPPROG = SY-REPID
DYNPNR = '1000'
DYNPROFIELD = 'S_FABGR'
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
TABLES
VALUE_TAB = LI_FABGRP
RETURN_TAB = T_RETURN
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
F4 help using field example:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_FABGR.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
 tabname = mara
 fieldname = matnr
SEARCHHELP = ' '
SHLPPARAM = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB =
EXCEPTIONS
FIELD_NOT_FOUND = 1
NO_HELP_FOR_FIELD = 2
INCONSISTENT_HELP = 3
NO_VALUES_FOUND = 4
OTHERS = 5
Select-options: s_rcode FOR g_grund . "Reason code
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_rcode-low.
Validation for Reasoncode
PERFORM sub_get_F4_rcodehelp .
FORM sub_get_f4_rcodehelp .
STRUCTURES Declarations
TYPES: BEGIN OF ty_rcode ,
grund TYPE mb_grbew,
grtxt TYPE grtxt,
END OF ty_rcode.
*Internal Table declaration
DATA : li_rcode TYPE STANDARD TABLE OF ty_rcode WITH HEADER LINE.
SELECT grund grtxt
INTO TABLE li_rcode
FROM t157e
WHERE spras = sy-langu .
*Help functions for external use
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'fieldname'
dynpprog = 'programname
dynpnr = '1000'
dynprofield = 'S_PCODE'
value_org = 'S'
TABLES
value_tab = li_rcode
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3 .
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " sub_get_F4_rcodehelp

Need to validate selection screen parameter valus

Similar Messages

Maybe you are looking for