Neo 2 desert combat shuttering (sliding skipping etc)problem with bfg 6800 ultra

hey guys i just built a new pc after i got everything installed and updated to service pack 2 i installed desert combat only to have shuttering problems especailly turning fast in chopper or plane its kinda like lag or dropping frames but according to fraps its not drop frames just really choppy game play i know its not the card because i stuck it back in barton 3000 board worked fine. put my old msi 5950 ultra in same problem
fixes tried with no sucess
reinstall windows
turned off nv
turned off fast writes
tried my old set of 512 corsair plantinums =i gig dual chan
install nforce driver from nvidia
tried serveral nvidia graphic card drivers even the bet 71.21
turned off spread spectrum
pulled hair out
tried old video card which is 5950 ultra both cards work fine with old mobo
basically im out of ideas
please help
system specs
90mn winchester core 3500 with xp 90 thermalright heatsink
audigy zs 2
corsair 3200LLPro with leds i gig in dual chan mode
two 74 gig raptors in raid o
OCZ 520 watt modstream powersupply
bfg 6800 ultra overclocked from factory 425/1100
xp pro fully updated sp 2
please please please help been working on this for two days without any luck maybe ill just rma the board and get an asus or gigabite board

First off have you been using Driver Cleaner to get rid of all the old bits of drivers? if not go get it read the instructions and use it. Re-start the driver process again. The latest ones on the Nvidia site are probably a safe bet at the moment. So clean your PC with that prog and install new drivers.
Then do as you say you have done and ensure 'FastWrites' are turned off. This is most important. Get 'Riva Tuner' and this will comfirm you have them turned off. Also get the 'Coolbits' registry tweak. Run this and it will add overclocking capability to your display properties. You can adjust both 2D and 3D speeds. Now what you must ensure is that they are both set at the same speed! sometimes the 2D comes set lower than the 3D this can cause symptoms like you are having. Set the 2D to the same speed as the 3D.
I have an XFX6800 Ultra in my K8N Neo2 Plat and it works superbly so fingers crossed doing the above will sort it as they are the main probs with the 6800Ultra cards.

Similar Messages

K8T Neo compatible with BFG 6800 OC??

Hey all, I just got an MSI K8T Neo-FIS2R mobo and put my BFG 6800 OC (128MB RAM) into it. The boot is all fine, but after I installed win xp pro with sp2, the video became really stuttery. i installed 66.93 drivers from nvidia's site, the via 4in1 drivers from msi's site (i didn't install the agp 3.0 drivers from teh 4in1 cuz i read that i shouldn't), but after i installed the drivers it became even more stuttery.
It's so stuttery that I can't even do anything. I have to boot into safe mode to even write this.
the vid card works perfectly in my old comp so I know it isn't the graphics card.
Plz help me!!

Quote
Originally posted by Tiresmoke
Time to airmail Santa a letter, methinks.
On second thought better fax it instead.
Yeah.... Have him do FedEx overnight as well.
Get as many amps on the 12v that you can afford & you will eliminate a lot of potential probs down the road. My Enermax (see sig.) has some pretty good specs.

MSI K8N Neo Plat and 6800 Ultra

I just got a BFG 6800 Ultra from a friend yesterday. Worked great for him the whole time he had it. I just put in a new 550 watt PSU because I read it requires a lot of power. Put it in, fan turns on, card seems to get power just fine. Just loading up and going through BIOS is like a matrix, everything is jumbled around and impossible to read. Windows will not boot, get a black screen. I can run in safe mode with a slightly messed up background. Under settings it does not detect any kind of card, but under device manager it is listed, and I did install drivers. Not sure what the problem could be, I messed around with what I could see in BIOS, turned off fast write and such. Any ideas? Thanks.

If you previously had an ATI card you will need to totally remove the old drivers & it's a good idea to replace them with newer versions regardless.
Simply uninstalling usually isn't enough, because there's always "leftovers". There's a free utility called Driver Cleaner (Google for it) that will remove all traces of the old drivers.
Also, if you are running a Neo 2 Platinum (AGP graphics) there's some other things to be aware of as far as BIOS settings.
- Disable ATI/Nvidia Speedup. This tries to OC the bejeebus out of your vid card & usually with bad results.
- Disable Fastwrites as well. This is a known NF3 chipset/6800 issue. One would think that Nvidia parts would "play nice" together - Go figure.

Problem with my MSI P35 Neo MotherBoard [Cannot find harddrive]

Hi guys.
So, I've been trying to install Archlinux for a while now, and I've been trying to figure out what problem Is by myself, and I've been asking a bunch of people, but it seems that it's going to a dead end.
What we figured out, and what we "think" it is, is that the controller on my motherboard does not support the system, and my SATA disk that I am trying to install on.
What i have tried is that.. I've followed the "beginners guide" to install arch linux, and when i noticed that i got a big problem with my harddrive i asked some people for help, tough we cannot figure out what the problem is..
Firstly i boot up with my ArchLinux CD.. Then i write km, to change the keyboard layout. Then /arch/setup ofcourse . After that when i try to partitionate and set mountpoints for filsystem it does not show any kind of hardware at all. So i tried to partitionate with gparted and then boot up with Archlinux again to install all my packages etc etc. But it seems like it does not write the information to anything.
This is a big problem for me cause i really want my Arch distribution to work, so please guys.. Help me!
EDIT
Just in case you wanted to know.. My motherboard is a MSI P35 Neo
Last edited by rahanjam (2008-10-07 14:03:35)

pointone wrote:*snip*
I don't have this AHCI option. So i don't know what to do else. Do you know?
AD28 wrote:*snip*
Do you mean, that my mobo doesent support linux, and that i cannot have it?

4g problem with skipping and connecting to computer

I am having problems with the ipod skipping and not holding onto a song. This means on occasion I will start a song and the ipod will randomly jump to next song or start playing and then jump. The seek time for songs has also seemed much slower than normal. This happens about 60% of the time. I have done 4 or the 5 r's reset, reinstalled ituns and ipod updater, tried the usb over the firewire cable etc. The ipod will not let me reset through the computerand fails to mount properly. I have attempted to access the ipod through ipod updater, itunes, and windows xp and no luck. At the same time it continues to read do not dissonect, while continuously spinning the hd.
I ran the internal dignostic on the ipod ( previous + select at the apple screen) to get the internal diagnostic. Accoring to this my hd is fine, and everything seems to test out normal. I am getting an occasional failure on the key test but it is inconsistant at best and can not be localized to one key. I have never noticed any scroll wheel problems
Despite all this (firewire checks out too), I can not connect the ipod to the computer, and am still having the skipping problems, any other ideas please? I am getting frustrated and considering replacing rather than spending 150 to 200 to fix.

Hi Anebi,
I have encountered and come past a similar problem. At least the same error message. I encountered it when using iCal from a Mac though.
What did I do? The idea came from this thread:
http://discussions.apple.com/thread.jspa?threadID=1346536&tstart=-1
1) I turned iCal and Webserver of
2) I went into the place where calendars are stored (see Server admin, iCal and settings). There I found my down to calendars/_uids_ and deleted all contents. The same with principals/_uids_
3) edit group and/or user prefs for calendareing in Workgroup Manager
4) restart WebServer and iCal
Works for me at least. Hope it helps.
I will turn iCal and Webserver before editing user preferences in the future (if I remember).
Message was edited by: Tobias Ahl

Problems with iTunes. Music skips and hisses. Sound is terrible. I have an IPad 2 and iOS7.1.

Problems with iTunes. Music. When I put on my ear buds, I hear it more clearly. There is this skipping and hisses. If you are an old (50)audiophile like I was when I was young, it sounds sort of like a record is skipping on my turntable. When I try to play a song it skips, jumps around and the Sound is terrible. I have an IPad 2 and iOS7.1. Help!!! Thanks in advanced. Spike

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful. Mid 2013 iMac.

I don't know how rare this is. I went a week or so without a problem, and now it's starting to recur. Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on. Further, it will send the same email over and over during this madness.
This is a show stopper. If there isn't a software fix soon, I may chuck this phone in the garbage.
Post relates to: Treo 800w (Sprint)
UPDATE: The problem comes and goes. The next day, no changes to the treo, everything workeds. Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming. I've since turned off roaming, and haven't had a problem for several days.
Message Edited by slrichardson on 12-22-2008 01:12 PM

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

My wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the photo

my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?

my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

Major Stopping/Skipping Problem With 30G Photo iPod

Hi all. I'll try to give the short version of my major iPod problems I've been having. It's been going on for a couple months straight now.
The first thing that started happening was, in the middle of playing a song, it would freeze, and then start skipping through of the rest of the tracks on that playlist or album. It would sometimes make a "whirring" sound when going from track to track without playing them. Sometimes, this process would start instead when trying to manually skip from one song to another...it would just start to skip through tracks. It had to be restarted a bunch of times, and none of these problems had been present in the 2 or so years previous I owned it. Eventually, it showed an "unhappy face" and nothing else could be done.
I brought it back to Best Buy, where I bought it, as it was still under warranty for another year. They sent the iPod back to Apple for repairs. The "repaired" iPod was back in my hands in about 3 weeks, and for a week or so worked perfectly. Then, it started having the skipping tracks problem again.
Not long there after, it started having more serious problems. It needed to be resetted very frequently. The skipping of tracks, the first warning sign, became the least of it's problems. It needed to be completely restored. The first time it was restored, it got through about 600-1000 of the 5800 songs on it, then stopped and said the restore failed.
Other times, it showed the dreaded "1418" message. Other times it had messages like these:
Attempting to copy to the disk “Andrew’s iPod” failed. An unknown error occurred (-69).
The iPod “Andrew’s iPod” cannot be synced. The disk could not be read from or written to.
The iPod “Andrew’s iPod” cannot be synced. The required file cannot be found.
Eventually, it synced correctly. But the problems continued, and over the course of two weeks it had to be completely restored about 3 or 4 times, although it would then work again perfectly fine for, like, an hour.
So I took it back in again. This time, Best Buy told me that I would be quickly sent back a "Refurb" unit (a refurbished iPod that someone else had returned, I guess and had then been fixed or what have you.)
After a few days, I got the refurb unit. It's not my old iPod, I could tell just by looking at the front and back. And, for about 2 weeks, it worked absolutely perfectly. It reloaded like a charm, and played completely fine. The battery life seemed a little iffy, but nothing crazy.
Then, yesterday, this iPod that *is not* the same iPod I returned as far as I can tell, is having THE EXACT SAME PROBLEM. Yesterday, in the middle of a song that I had played many times before, it froze, stopped, and started skipping songs. It needed to be reset, what else is new. So, I did, and got the "unhappy face" with the address of iPod support once again.
I'm really confused. What is the problem here? When I had my first unit returned, I figured perhaps the problem hadn't been addressed. But this doesn't even appear to be the same unit.
Could there be a problem with iTunes 7.1.1 with my iPod? For what it's worth, I followed the advice found online to try to find corrupted music files, and can't find any. When it had restore problems with the last unit, I checked to see if it was stopping on any particular song, and it was different every time. Even so, I erased those songs just in case.
Also, when it freezes and stops now (and with the old unit, for that matter) it was never the same song. And it was almost always on a song that had already been played many times, perfectly fine, many times before, and recently to boot. I've also played through almost every song through iTunes over the last couple months to check for any obvious problems, and never found any.
With over 5750 songs on my iPod, I don't know how I can possibly know with complete certainty if there's anything with a problem amongst them, although completely erasing my iPod library that until 2 months ago never had a problem is kind of a worst case scenario.
What on earth could be wrong with my iPod? It's currently plugged into an outlet, vacillating between the Apple symbol and the "unhappy face." Anyone have ANY ideas?!?!?

I wondered what a 'photo' iPod was. This forum is for the 5G video. I don't know how long an iPod is supposed to last. I think it is based on use and how roughly it is handled if it is a hard-drive model.
Maybe time for a new machine?

Skipping problem with ipod

I have another problem with my 30G ipod video. It skips certain songs, not entirely, but partway through. For instance, there is a song that it will play for 15 sec, and then skip to the next one. It is always the same songs and it skips at the same point in the song. However, if I scan through the song it will allow me to scan past the point where it would usually skip, and then play the rest of the song fine. There are at least two or three that it does this with, but there are undoubtedly more because I have not listened to nearly all the songs on it yet (I just uploaded them).
I have tried a few things, including restoring the ipod, deleting and reloading the problem songs, and resetting the ipod. The songs in question play with no problem in itunes.
Any ideas?
Thanks.

Is the software on your iPod up to date?
iTunes
iPod Updater
Update iPod's Software
Did the iPod successfully restore?
Restore iPod
You may want to try doing this...
How to recreate your iTunes Library
And then sync your iPod again (and see if that helps at all).
btabz

VCORE PROBLEMS WITH MSI P35 NEO F

To see if I can help or at least explain what's happening, buy a MSI P35 NEO F for using a quad, the topic is as follows handling vcore is rare
First thing I can not put less voltage that the cpu brings default, second what happens next if bios setting 1.3250 vcore for Quad, once in both windows everest, cpuz, like others programs tell me that this placed on 1.40 vcore which is excessive for the speed at which the quad, this is so in this mobo? Their story that was installed version 1.20 bios which handled vcore%, the upgrade to version 1.40 and is now handled in decimals (numbers) vcore, but still the problem
You pull more vcore which setting in bios and if you want to download the vcore eg put 1.26 vcore not let you because it takes the vcore default of cpu minimum.
i'm not crashing or problems with the temperatures, but nobody likes to have more vcore's necessary.
Wonder because being rookie of this mobo, maybe there's some bios version that fixes this bug or someone knows something else, thank you guys
C2Q Q6600
2 X 1GB G.SKILL 6400
PSU 550 MODULAR TOPOWER
-- SORRY FOR MY ENGLISH --

You can slap 1.6v in that CPU and temps won't rise that much.
Core 2 Duo/Quad operates @ 1.250-1.425, anywhere in between those values is perfectly stable for Intel stock cooler and frequency.
Absolutely nothing to worry about. But if you want to complain about >1c I really can't see the sense in that.

Neo 2 desert combat shuttering (sliding skipping etc)problem with bfg 6800 ultra

Similar Messages

Maybe you are looking for