Nested Dashboard navigating to wrong Path OBIEE 11.1.1.5

Hello gurus
I have created nested dashboard with hep of below thread. But I am facing an issue. I am not sure whether I am wrong some where or its a Bug. Just to make sure we are using OBIEE 11.1.1.5.
Thread to create Nested Dashboards : Nested Dashboard Pages in OBIEE 11.1.1.6
Here is the issue:
I have created a Dashboard "1" and have pages A & B. I have embedded the Dashboard 2 in Dashboard 1- Page A. Dashboard 2 have pages 2a,2b...Etc. Now when I click on dashboard page B which is at Dashboard 1, it give me an error and says that "path not found". The problem is OBIEE is looking for Dashboard Page B in extension of Dashboard 2, Where as it should Ideally look for dashboard page B Under the path of Dashbaord "1". Further When I remove the Embedded content it work fines. Is it a Bug???
Please help.
A
Edited by: user10249572 on Jun 28, 2012 2:02 PM

First create a dashboard prompt for start date, base it on the date dimension, date column and at the bottom of its list of options opt to set a presentation variable. Give the variable a name eg. pv_dt_start
Next create a simple request. Add the measure column for Inventory amount and edit the formula to make reference to the presentation variable. You will need to use the 'Filter using' syntax. It will be something like this:
Filter("Fact Table"."Inventory Measure" USING "Date Dimension"."Date Column" = '@{pv_dt_start}')
That's it in a nutshell. Repeat the procedure for your end date column.
Paul
http://total-bi.com

Similar Messages

  • JSF - Why getting wrong path Handling URLs in Facelets Templates

    Hi, I am trying to do a web application using JSF, Facelets in Netbeans 6.7. but I am having a problem:
    Why I am getting wrong path ?
    It is very simple, straight forward web application.
    When run, it shows the template-client.xhtml perfectly . The navigation menu is shows ok, but they don't work. However, if I enter in the browser address http://localhost:8080/test3/portal/products.jsf it goes perfect to the right page and the navigation between About, Products and Home works perfect. But once I click on Home, the menu start to give me errors. Looks like the path is wrong again.
    folders structure:
    test3My code:
    faces-config.xml:
    <?xml version='1.0' encoding='UTF-8'?>
    <!-- =========== FULL CONFIGURATION FILE ================================== -->
    <faces-config version="1.2"
        xmlns="http://java.sun.com/xml/ns/javaee"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
        <application>
            <view-handler>
                com.sun.facelets.FaceletViewHandler
            </view-handler>   
        </application>
    </faces-config>web.xml:
    <?xml version="1.0" encoding="UTF-8"?>
    <web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
        <context-param>
            <param-name>com.sun.faces.verifyObjects</param-name>
            <param-value>true</param-value>
        </context-param>
        <context-param>
            <param-name>com.sun.faces.validateXml</param-name>
            <param-value>true</param-value>
        </context-param>
        <context-param>
            <param-name>javax.faces.DEFAULT_SUFFIX</param-name>
            <param-value>.xhtml</param-value>
        </context-param>
        <context-param>
            <param-name>facelets.DEVELOPMENT</param-name>
            <param-value>false</param-value>
        </context-param>
        <context-param>
            <param-name>facelets.SKIP_COMMENTS</param-name>
            <param-value>true</param-value>
        </context-param>
        <servlet>
            <servlet-name>Faces Servlet</servlet-name>
            <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
            <load-on-startup>1</load-on-startup>
        </servlet>
        <servlet-mapping>
            <servlet-name>Faces Servlet</servlet-name>
            <url-pattern>*.jsf</url-pattern>
        </servlet-mapping>
        <session-config>
            <session-timeout>
                30
            </session-timeout>
        </session-config>
        <welcome-file-list>
            <welcome-file>forward.jsp</welcome-file>
            </welcome-file-list>
        </web-app>forward.jsp:
    <%@page contentType="text/html" pageEncoding="UTF-8"%>
    <jsp:forward page="template-client.jsf"/>template-client.xhtml:
    <?xml version='1.0' encoding='UTF-8' ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"
          xmlns:ui="http://java.sun.com/jsf/facelets"
          xmlns:h="http://java.sun.com/jsf/html">
        <body>
            This text above will not be displayed.
            <ui:composition template="/template.xhtml">
                This text will not be displayed.
                <ui:define name="title">
                    Facelets
                </ui:define>
                This text will also not be displayed.
                <ui:define name="body">
                    Hello from the Facelets client template!
                </ui:define>
                This text will not be displayed.
            </ui:composition>
            This text below will also not be displayed.
        </body>
    </html>template.xhtml:
    <?xml version='1.0' encoding='UTF-8' ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"
          xmlns:ui="http://java.sun.com/jsf/facelets"
          xmlns:ice="http://www.icesoft.com/icefaces/component">
        <head>
            <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
            <title>Facelets - Template Example</title>
            <link href="#{facesContext.externalContext.requestContextPath}/css/default.css" rel="stylesheet" type="text/css" />
        </head>
        <body>
            <div id="menu">
                <ui:insert name="linemenu">
                    <ul>
                        <li><a href="../forward.jsp">Home</a></li>
                        <li><a href="about.jsf">About Us</a></li>
                        <li><a href="products.jsf">Products</a></li>
                    </ul>
                </ui:insert>
            </div>
            <div>
            <h1>
                <ui:insert name="title">Default Title</ui:insert>
            </h1>
            <p>
                <ui:insert name="body">Default Body</ui:insert>
            </p>
            </div>
        </body>
    </html>about.xhtml:
    <?xml version='1.0' encoding='UTF-8' ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"
          xmlns:ui="http://java.sun.com/jsf/facelets">
        <body>
            <ui:composition template="./../template.xhtml">
                <ui:define name="title">
                    title ABOUT
                </ui:define>
                <ui:define name="body">
                    body ABOUT
                </ui:define>
            </ui:composition>
        </body>
    </html>products.xhtml:
    <?xml version='1.0' encoding='UTF-8' ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"
          xmlns:ui="http://java.sun.com/jsf/facelets">
        <body>
            <ui:composition template="./../template.xhtml">
                <ui:define name="title">
                    title PRODUCTS
                </ui:define>
                <ui:define name="body">
                    body PRODUCTS
                </ui:define>
            </ui:composition>
        </body>
    </html>

    My folders:
    Test3
         Web Pages
              /WEB-INF
              /css
                  -default.css
              /layouts
              /portal
                  -about.xhtml
                  -products.xhtml
              -forward.jsp
              -template.xhtml
              -template-client.xhtmlPlease, I need help with this. It may is very easy to find out, I maybe skiping something
    Thank for your help anyone!!!

  • What's wrong in OBIEE 11g

    Everyone is saying how good OBIEE 11g is so I decided to post about what's bad with it, which surprisingly it's lot. This is what I think is wrong with OBIEE 11g:
    1) Can't install the client tools only, it requires a full install. It seems they have simplified the installation in 11g but only for developers/sales reps running everything on the same machine on Windows PC. The Client tools even requires new set of schema, nonsense!
    2) The "super" new installer that allegedly does everything and simplifies your life does not create the time dimension tables for the Usage Tracking reports.
    3) BI Publisher still uses a separate Scheduler. Half-baked integration still there...
    4) OEM introduced functionality to configure things from the web but again half-baked integration there, a lot of config parameters still need done directly on config files. If you are going to change this better to change all at one go rather than confusing people with half-done things.
    5) Installer requires new schemas to be created in advance. Can't deffer that, can't use an existing schema. This is good for developers running everything on the same machine. Rubbish for enterprises where BI developers are usually not DBAs.
    6) Oracle installer now requires a myriad of permissions and packages on Unix to install (i.e. write permissions on /opt/app/oracle). 10g installer was much better and didn't need all that crap.
    7) 64 bits OSes only support "Software only" installs, need to be configured manually. WTF? The whole enterprise world is already on 64bits! Nonsense!
    8) Still no support for client tools in 64bits OSes.
    9) IE6 no longer supported. May be it was unavoidable but most of the enterprise is still in IE6.
    10) No choice of J2EE. I don't see the need to force people out of the their choice of J2EE other than pure anti-competitive behaviour.
    11) License costs up 130%.
    IMHO the above is a big step back, Oracle is missing the point here. Obviously not enough competition on the BI market, Oracle's got too big and too greedy.

    Here is an interview with Kurt Wolff, which is one of the original OBIEE developers from the nQuire days:
    http://obibb.wordpress.com/2010/08/23/obibb-%E2%80%93-interviews-kurt-wolff/
    This is particularly relevant of how I feel about OBIEE 11g so far...
    "I don’t really know if there are any new features that are important to me in my current work or not. There may be features that help Oracle sell more product, but that’s different.
    Over two years ago I submitted a list of 20 “little” enhancements that, as someone who on a daily basis worked developing analytic apps with OBIEE, I thought would be really beneficial. They were “little” in the sense that I thought the dev team could knock them all out in less than three weeks’ time. Seriously big impact with seriously little work.
    Instead, we’re getting what appears to be a major re-write of the product, which raises questions in my mind about compatibility, unlearning, and new bugs. What I know about new features – well, they’re not so compelling. Sure, if you have a need to integrate Essbase with your other data, that’s good. But in my present situation, it’s irrelevant, and I’m planning on taking a lot of time to evaluate the new release before moving ahead with it."

  • Wrong path and application in registry protocol\stdFileEditing\Server ?

    Hi
    How come there is a wrong path in registry is it a security issue, error or just values not in use anymore ?
    I check via regedit: HKEY_CLASSES_ROOT the key .pdf points to
    AcroExch.Document the key curver points to AcroExch.Document.7
    Under this i check
    HKEY_CLASSES_ROOT\AcroExch.Document.7\protocol\StdFileEditing\server
    the value is
    "C:\Program Files\Adobe\Reader 9.0\Acrobat\Acrobat.exe" (Acrobat catalog and the exe file is not existing)
    but in my filesystem the real path is
    C:\Program Files\Adobe\Reader 9.0\Reader
    and i think the program should be AcroRd32.exe instead
    When I have corrected the key an update would reverse it to the old not existing value
    So could anyone tell me why i se this behaviour ?
    Regards
    SEJ

    Hi Frank,
    How did you call the application in a war?
    Regards,
    Violeta

  • Wrong path for go.bat in portal integration

    Hi Friends,
    during the configuration of the portal integration in rspor_cust01 I get the message
    'Windows can not find C:\usr.......\go.bat'.
    Where can I change the path because it is in D:\usr\sap\......go.bat.
    Thanks you for any help.
    Rg Jimbob

    Hi Subbu,
    I used workshop page properties to associate the image to the page.
    framework/skins/classic/images/home.gif
    - Shankar
    Subbu Allamaraju <[email protected]> wrote:
    Shankar,
    Did you use any tag to create the img tag? Do you have any sample
    HTML/JSP snippet?
    Subbu
    Shankar Bala wrote:
    I created a new desktop and have the following problem. The imagelinks to portal
    pages in the horizontal nav bar in the top have wrong path.
    Example.
    In the original portal the home page link in the nav bar has a imageassociated
    with it in workshop.
    \framework\skin\classic\images\home.gif
    The partial url generated for the image looks liek this:
    \mywebapp\\framework\skin\classic\images\home.gif.
    I created a new desktop everything works fine except for the images.The href's
    are created for the links but the image path is wrong.
    the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
    The "appmanager" in the path causes the problem.
    Is this a bug?

  • Wrong path on JNLP chain

    Hi
    Sorry to post it here, but I was unable to find where We can post JavaFX Issues.
    This is a minor issue, but need to be adressed.
    I always set my java Console to shown, to test my applets, etc.
    While testing some JavaFX, I could note that JavaFX has a wrong path, or a wrong path chaining:
    network: Connecting http://javafx.com/launch/lib/lib/basickit.jar with cookie "JSESSIONID=c3c4962140d944b30859de123fae; s_cc=true; s_sq=%5B%5BB%5D%5D"
    java.io.FileNotFoundException: http://javafx.com/launch/lib/lib/basickit.jar
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at sun.plugin.PluginURLJarFileCallBack.downloadJAR(Unknown Source)
         at sun.plugin.PluginURLJarFileCallBack.access$000(Unknown Source)
         at sun.plugin.PluginURLJarFileCallBack$2.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.plugin.PluginURLJarFileCallBack.retrieve(Unknown Source)
         at sun.net.www.protocol.jar.URLJarFile.retrieve(Unknown Source)
         at sun.net.www.protocol.jar.URLJarFile.getJarFile(Unknown Source)
         at sun.net.www.protocol.jar.JarFileFactory.get(Unknown Source)
         at sun.net.www.protocol.jar.JarURLConnection.connect(Unknown Source)
    (...)Note the correnct URL is
    http://javafx.com/launch/lib/basickit.jar an not
    http://javafx.com/launch/lib/lib/basickit.jar , without the extra /lib
    A few lines later there is a correct call to basickit.jar :
    network: Connecting http://javafx.com/launch/lib/basickit.jar.pack.gz with cookie "JSESSIONID=c3c4962140d944b30859de123fae; s_cc=true; s_sq=%5B%5BB%5D%5D"
    network: ResponseCode for http://javafx.com/launch/lib/basickit.jar.pack.gz : 304
    network: Encoding for http://javafx.com/launch/lib/basickit.jar.pack.gz : null
    network: Disconnect connection to http://javafx.com/launch/lib/basickit.jar.pack.gzI hope it help to find out a fix.
    A.

    Which applet were you running?It happens on several demos at JavaFX.com .
    Perhaps in all of then.

  • Update Reader 9.5.2. Windows7 wrong path

    Waar kan ik het correcte pad invoeren?

    Sorry, I have no idea what "wrong path" you are talking about?  An error message during the update?  How are you updating?
    Maybe and uninstall (using http://labs.adobe.com/downloads/acrobatcleaner.html) and reinstall will fix the problem?

  • New desktop has wrong path for page links in nav bar

    I created a new desktop and have the following problem. The image links to portal
    pages in the horizontal nav bar in the top have wrong path.
    Example.
    In the original portal the home page link in the nav bar has a image associated
    with it in workshop.
    \framework\skin\classic\images\home.gif
    The partial url generated for the image looks liek this:
    \mywebapp\\framework\skin\classic\images\home.gif.
    I created a new desktop everything works fine except for the images. The href's
    are created for the links but the image path is wrong.
    the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
    The "appmanager" in the path causes the problem.
    Is this a bug?

    Hi Subbu,
    I used workshop page properties to associate the image to the page.
    framework/skins/classic/images/home.gif
    - Shankar
    Subbu Allamaraju <[email protected]> wrote:
    Shankar,
    Did you use any tag to create the img tag? Do you have any sample
    HTML/JSP snippet?
    Subbu
    Shankar Bala wrote:
    I created a new desktop and have the following problem. The imagelinks to portal
    pages in the horizontal nav bar in the top have wrong path.
    Example.
    In the original portal the home page link in the nav bar has a imageassociated
    with it in workshop.
    \framework\skin\classic\images\home.gif
    The partial url generated for the image looks liek this:
    \mywebapp\\framework\skin\classic\images\home.gif.
    I created a new desktop everything works fine except for the images.The href's
    are created for the links but the image path is wrong.
    the url generated is : \mywebapp\appmanager\framework\skin\classic\images\home.gif
    The "appmanager" in the path causes the problem.
    Is this a bug?

  • Bug report : Navigator display wrong messages in package body

    Just run some code , you can see the Navigator display wrong messages in the package body,but the package work fine in sqlplus / toad or other tools.
    create or replace package SIMPLE AS
    Procedure simple_proc ;
    END;
    create or replace package body SIMPLE AS
    Procedure simple_proc
    IS
    v_tname varchar2(100);
    begin
    SELECT PERCENTILE_disc(0.5) WITHIN GROUP (ORDER BY tabtype DESC)
              INTO v_tname
              FROM tab;
    END simple_proc;
    END;
    Then open the package body in the Navigator (Connection Pane==> Connection Name ==> Packages ==> Simple Body ) , and show the error message:
    Unexpected token
    Missing Expression
    But if I just create the procedure out of the package , it work fine.
    CREATE OR REPLACE
    Procedure simple_proc
    IS
    v_tname varchar2(100);
    begin
    SELECT PERCENTILE_disc(0.5) WITHIN GROUP (ORDER BY tabtype DESC)
              INTO v_tname
              FROM tab;
    END simple_proc;
    /

    This has already been discussed a number of times (see http://forums.oracle.com/forums/search.jspa?objID=f260&q=Unexpected+token).
    As I understand it, it is related to the parser that SQL Developer is using to display the package decomposition in the navigator not coping with the full PL/SQL and SQL syntax (largely analytical functions from memory).

  • Web Application Transaction Monitoring Alerts with "wrong" Path

    Hello,
    i have created some web transaction monitors, such as
    http://foo.htm who is  hosted on the server foo123.cologne.org.
    It works.. but
    we have also a mssql monitoring, the discovery of the mssql management pack discovers the reporting part of mssql server on our managementserver Operations12.cologne.org. So (it's right..) the server Operations12.cologne.org is a member of the SQL Instances;SQL
    Compontents;SQL Computers group.
    When the web transaction monitor generates an alert, it have the pathname Operations12.cologne.org and not the pathname of the "right" server foo123.cologne.org.
    For our mssql admins i have build an email-notification, when somethings going wrong at our sql servers (member of the SQL Instances;SQL Compontents;SQL Computers group) they received a mail.
    The problem is, that they received a mail, when a web transaction monitor generated one, because the pathname is the name of our management server, because the management server is a member of thos sql server groups.
    Someone have an idea to fix my "problem"?
    - Best way: changing the path names of the web transaction monitorings... but how? i can't find anything to change..
    Kind regards
    Wolfgang Winter

    Thank you, it's a help to decide, what to do, so i have to solutions:
    - installing an agent to the web-appliction-hosting-server and configure it as a watcher node
       (may be i will have problems with our firewall admins, because they have to allow the communications and.. when the hosting watcher is down, i have no alerts.. when i use more than one watcher nodes (good).. i have the wrong path names..
    - configure a part of our management server group without  SQL-Reporter Component as a watcher node
       (more easy, because i have to tell my firewall admins: "the server foo456 is the standard watcher node"
    Crazy.. because i don't know, how to assign the web transaction monitors to the "causing" server.., for mail notification and for our integration to HP Service Desk...

  • Mail has wrong path for Save

    I am using v. 7.1 of Mail under OS X 10.9.1. When I attempt to save an email to my Documents folder I get an error message:
    Could not save to path /Users/bob/~/~/~/~/~/~/~/~/~/~/Documents/Payment submitted.rtf. Choose a different path.
    Clearly Mail has a bad pathname for the Documents folder. TextEdit documents save properly to Documents. Terminal shows the path to Documents as: /Users/bob/Documents
    What is going wrong with Mail?
    Bob

    Agreed.  I get a completely different wrong path, but only (so far) when I try for Documents.  Seems like a bug. Good catch.
    Apple - Mac OS X - Feedback

  • Profile pictures wrong Path

    I have setup the thumbnail pictures for users in Sharepoint 2013. I can browse the library throughy this  link
    http://myserver/sites/mysite/_layouts/15/start.aspx#/User%20Photos/Forms/Thumbnails.aspx?RootFolder=%2Fsites%2Fmysite%2FUser%20Photos%2FProfile%20Pictures&FolderCTID=0x0120008BF2C6579F4E1947B6C670F4524E2C06&View=%7BDF932ADB%2D33D5%2D4024%2DA88C%2DA4B0253DBE98%7D
    but when I open a user page, the picture is not loading. I see from the debugger that is calling the following url which is missing a "/" right after the sites/mysite
    http://myserver/sites/mysiteUser%20Photos/Profile%20Pictures/j_doe_LThumb.jpg?t=63560464578
    How can I fix this??
    CKotsis

    Hi CKotsis,
    According to your description, my understanding is that the profile picture showed a wrong path.
    Please try to run a full user profile sync, compare the result.
    Please modify and run the following PowerShell commands to check if it works:
    $site = get-spsite "https://sharepoint" 
    $context= [Microsoft.office.server.servercontext]::GetContext($site)  
    $userProfileManager = new-object Microsoft.office.server.userprofiles.userprofilemanager($context)  
    $profiles = $userProfileManager.GetEnumerator()
        foreach ($profile in $profiles)
         $Matchurl = "mysitesUser Photos"
          if($profile["pictureurl"].value -match $matchurl)
                     Write-host $profile["AccountName"].value "contains incorrect url"
                     $CurrentURL = $profile["Pictureurl"].value
                     $CurrentURL = $CurrentURL.tostring()
                     $GoodUrl = "mysites/User Photos"
                     $CorrectUrl = $CurrentURL.replace($matchurl,$goodurl)
                     $profile["pictureurl"].value = $correcturl
                     $profile.commit()
                     Write-host $profile["AccountName"].value "PictureURL has been corrected"
    Here is a similar post for your reference:
    https://social.technet.microsoft.com/Forums/office/en-US/1fa50226-a495-4d3c-8fd3-da9fdede6a52/wrong-profile-picture-url?forum=sharepointadminprevious
    Best Regards,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Dashboard Navigational Attributes

    Hi,
         I need to integrate a Dashboard in a Web Dynpro application and when I create a configuration for the component "SME_UIE_CHIP_DASHBOARD",
    I am told to add as many navigational attributes for my chip as I have in my Dashboard.
                   Does any one know what is the role of dashboard navigational attributes and how to use them?
    Best Regard,

    Hi,
    Its some mis-directional approach. Navigation attribute is concept of core BW.
    What connectivity you are using in dashboard, based on that you approach will change.
    iIn normal BW-> BI -> Portal scenario;
    if you want to integrate Dashboard in Portal. you have use the opendoc link of the dashboard in a iview. SSO needs to be configured between BW, BO and enterprise Portal.
    -Sriram

  • Do we have a feature of export the names of the reports and dashboards that are available in OBIEE?

    Is there any option to export the names of the reports and dashboards that are available in OBIEE?

    Hi,
    You can create report using catalog manager:
    1. Open catalog in Online mode.
    2. Select shared folder & then click on Tool-> create report.
    3. For report name -> select Analysis from drop down list & move "Name" in right pane(or whatever detail u want, u can select from list).
    4. For Dashboard -> select Dashboard from drop down list & then move name in right pane.
    5. Click OK  & save report.

  • Teststand 3.0 Deployment looking for a file(glang.chm) in a wrong path

    Hi, Please help
    i just try deploy an installer using TestStand 3.0. it can successfully process the workspace file,  But, when the TestStand deployment tool try to build the installer, it keep looking for one of project file(glang.chm) in a wrong path, the error message is following, see the attachment for the screen shot  
    Error Code:7
    Could not process LabVIEW VIs. Fix any broken VIs before rebuilding. LabVIEW error:
    C:\MVS 2\data\data\data\glang.chm - source does not exist
    +++++++++++++++++++++++++++++++++++++++++++++++++
    i understand that it is looking for glang.chm in "C:\MVS 2\data\data\data\", but in my project, glang.chm actually is under "C:\MVS 2\data\". In order to make it works, i need to create the path "C:\MVS 2\data\data\data\" and copy glang.chm into the path.
    My question is: How to change the setting in TestStand deployment tool, so that it would look for glang.chm in corrected path"C:\MVS 2\data\", not in "C:\MVS 2\data\data\data\" ?
    Attachments:
    error message(screen shot).jpg ‏184 KB

    Well, David's solution works as expected. It copies the the pristine .lnk file from the startup menu to the desktop.
    This .lnk file will start only the operator interface testexec.exe without loading any sequence.
    Now I did try a modification. I did create a .lnk file, which loads the sequence file automagically by providing the right commandline arguments to testexec.exe. This .lnk file works on the development system either I start it from desktop or from some normal directory with the explorer.
    And now I try to add that .lnk file to the deployed files like all other deployed files by adding it to some project in the workspace, which is configured to be used in the deployment wizard. That doesn't work.
    If there is a 2kb "MySequence.lnk" in t
    he development tree,you will also find a "MySequence.lnk" in the Image tree at the expected position. But this is 1396 kb big, which is just the size of testexec.exe ( Labwindows/CVI version) where the .lnk file did point to. And the properties (commandline) of that .lnk file became empty.
    Other "normal" files in the same directory, which are also included in the deployment, are copied without any coruption into the Image tree into the same directory as the corupted .lnk file.
    The installer will install the corupted .lnk file to the desired position without problems. And copying it with post.bat to the desktop is also no problem.

Maybe you are looking for