Network Communication Error in Essbase Studio

Hi All,
I added one property in server.properties file in Essbase studio with the below line
server.essbase.streamingCubeBuilding=true
After that I restarted the Essbase Studio services to get that property into effect which was available in the below mentioned path
//MIDDLEWARE_HOME/user_projects/epmsystem1/BPMS/bpms1/bin/
However after restarting the services,I am not able to conenct Essbase Studio and facing some below error;
error connecting to essbase studio server
Reson : Network Error
Network communication with the server failed.Check your network connection and try again.
Connection refused : connect
Can someone help me out to resolve this issue
Thanks,
RV

Issue is resolved.
We need to restart the Essbase Studio services with Administration priveleges.
Thanks,
RV

Similar Messages

Network Connecting Error in Essbase Studio

Hi All,
Frequently we are getting network connectivity lost error.Sometimes after restarting the services it is working fine.
However can i know the reason why exactly this is happening.Also,Please assist me which log(I mean log path) I have to refer to analyse this issue.
Error:
Error connecting to essbase studio server
Reason : Network Error
Network communication with the server failed.check your network connection and try again
Conenction refused: Connect
For your reference
Version : EPM 11.1.2
Backend : SQL Server 2005
Thanks,
SatyaBodhanapu

Hi,
I am not sure I think we are using Apache to host the Server.
You need to restart the services in the below mentioend path
//MIDDLEWARE_HOME/user_projects/epmsystem1/BPMS/bpms1/bin/ in EPM 11.1.2 version
Thanks,
SatyaB

TNS:internal network communication error at OCI call OCIServerAttach

hi,
am using OBIEE 11g, i have made a new repository in obiee and when i done my analysis phase i checked the result and i recived an error :
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 17001] Oracle Error code: 12157, message: ORA-12157: TNS:internal network communication error at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
i made the changes in TNS but nothing happened, any suggestion ??
thanx..

Hi Guys,
I got the same error message. I can see the data in the physical layer. Once i import my repository via weblogic, i can see the subject areas and all its related filed in Analysis section.
However i cannot view any data for any columns. Error;
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
SQL Issued: SELECT 0 s_0, "Invoices"."Customer Name"."ACCOUNT_NAME" s_1 FROM "Invoices" FETCH FIRST 65001 ROWS ONLY

ORA-12157: TNS:internal network communication error

Hi All,
Iam facing this problem in my 10.2.0.4 database.
while running an application in database it throwed this error.
ReportDistribution
OCI ERROR code 12157: ORA-12157: TNS:internal network communication error
on 11/21/2008 09:37 for application ReportDistribution as ReportDistribution/[email protected]
Recently in tns entries hostname is changed to ipaddress. is this the reason for error.
Please advise.
Thank You.

ORA-12157:     TNS:internal network communication error
Cause:     Internal error during network communication.
Action:     Not normally visible to the user. For further details, turn on tracing and reexecute the operation. If error persists, contact Worldwide Customer Support.

Data load error in essbase studio

I get the following error when trying to load an ASO cube using Essbase Studio (EPM 11.1.2). This error doen't seem to be documented in any of the Essbase manuals. Question - does this error indicate an essbase server issue or a data source issue? I'm thnking it's datasource related, but my data source is an Oracle database, which I've used previously to load cubes without a problem. I've refreshed the source and can connect to it fine otherwise.
Error:
Data load started at: Fri Dec 03 08:52:21 EST 2010. Data load elapsed time: 10 Minutes 23 Seconds.
Failed to deploy Essbase cube.
Caused by: Failed to load data into database: 8020.
Caused by: Cannot execute a SQL query
Caused by: Io exception: Socket read timed out
Caused by: Socket read timed out
Appreciate any hel with this issue.

When I have issues with Studio I try to break it down slowly. I build my dimensions one at a time. If it breaks on a single dimension build I trace the issues backwards and usually find my issue in the schema.
Studio's role in life is to create SQL load rules and as such depend on a good schema definition. Unforntunately, the dimension build rules can't be opened in EAS with the Dataprep Editor (regular load rules) because they're binary and can do things that a normal load rule cannot (text measures, date measures, time varying attributes, etc.). But that doesn't mean the .rul files are un-readable. If you're having trouble with a particular dimension build process, open the load rule it creates with something like Notepad and grab the SQL that Studio is generating and drop it into Toad (or equivalant) to see if it is generating usable code. If not, there's something wrong with your modeling and you need to go back to the mini-schema.
When you're able to build all dimensions all at the same time, you're almost there. If your issues comes when you want to build and load data, the final debuging steps go quickly. Towards that end, the data load rules (ones that load data vs. building dimensions) generated by Studio can be edited in EAS using the Dataprep Editor. If you know SQL Load Rules, you should be able to figure out. If not, contact John Goodwin, OCS or a partner and set up a consulting visit.

Excel Addin Pull error from Essbase studio cube

Hi There,
I have cube deployed from essbase studio with dupilicate member name enable. however user gets error "unable to resolve duplicate name "2010" on line 1" error when using Excel addin and SmartView. I guess I have year 2010, also have account 2010, but it build and deploy fine.
Any suggestion?
Many thanks
Edited by: Donny on Jul 28, 2011 5:29 PM

I think I figure it out

Network Error: Error connecting to Essbase Studio server

Hi......I am able to login to almost all the apps (shared services, Web Analysis, FIR, Web Services etc) except EssBase Studio. When i try to login to essbase studio it says "error connecting essbase studio server"
with detailed error "Network communication with the server failed. Check your network connection and try again.
Connection refused: connect"
Any idea?

here is the log file
0000JeIWmdLDwW05zzWByW1GXwyc000000,0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: <init>] Failed to load driver for netezza.
[2012-10-24T16:54:50.218+05:30] [hyperion] [ERROR] [ESSSTD-145015] [com.hyperion.cp.driver] [] [nwaddr: 10.0.2.15] [tid: 10] [userId: system] [ecid: 0000JeIWmdLDwW05zzWByW1GXwyc000000,0] [SRC_CLASS: com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection] [SRC_METHOD: createSQLConnection] Unable to establish connection to Oracle server.
[2012-10-24T16:54:50.369+05:30] [hyperion] [ERROR] [ESSSTD-145015] [com.hyperion.cp.driver] [] [nwaddr: 10.0.2.15] [tid: 10] [userId: system] [ecid: 0000JeIWmdLDwW05zzWByW1GXwyc000000,0] [SRC_CLASS: com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection] [SRC_METHOD: createSQLConnection] Unable to establish connection to Oracle server.
[2012-10-24T16:54:50.369+05:30] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [] [nwaddr: 10.0.2.15] [tid: 10] [userId: system] [ecid: 0000JeIWmdLDwW05zzWByW1GXwyc000000,0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage=Cannot initialize catalog storage. Make sure the server.properties file contains the correct information.[[
com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Cannot initialize data storage engine.
     at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:78)
     at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:104)
     at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:194)
     at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:81)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)
     at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1318)
     at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:184)
     at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:130)
     at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:209)
     at com.hyperion.cp.server.ServerMain.main(ServerMain.java:289)
Caused by: com.hyperion.cp.driver.util.DriverConnectionException: Cannot establish connection to Oracle server.
     at com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection.createSQLConnection(OracleConnection.java:283)
     at com.hyperion.cp.driver.adapters.sql.SQLConnection$ConnectionPool.<init>(SQLConnection.java:1226)
     at com.hyperion.cp.driver.adapters.sql.SQLConnection.construct(SQLConnection.java:450)
     at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:112)
     at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)
     at com.hyperion.cp.server.QueueableTask.setMetadataConnection(QueueableTask.java:53)
     at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:61)
     ... 11 more
Caused by: java.sql.SQLRecoverableException: ORA-01033: ORACLE initialization or shutdown in progress
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:397)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)
     at oracle.jdbc.driver.T4CTTIoauthenticate.processError(T4CTTIoauthenticate.java:448)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
     at oracle.jdbc.driver.T4CTTIoauthenticate.doOSESSKEY(T4CTTIoauthenticate.java:409)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:395)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:678)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:238)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)
     at java.sql.DriverManager.getConnection(DriverManager.java:582)
     at java.sql.DriverManager.getConnection(DriverManager.java:154)
     at com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection.createSQLConnection(OracleConnection.java:273)
     ... 17 more
]]

Essbase Studio Fails Validation - Incorrect Server.properties path

I've tried to figure this out on my own, but I just can't seem to get it.
During the validation script of EPM 11.1.1.3 (Windows Server 2k3), I get the following error for Essbase Studio:
Start running Essbase Studio Server
Essbase Studio Server failed.
Connecting to Essbase Studio Server... - failed
Error:Logging configuration file is not found. Expected filename is D:\Hyperion\common\validation\9.5.0.0\.\server.properties
Network communication with the server failed
Clearly, it looks like the path is incorrect (the extra .\ between 9.5.0.0 and server.properties)
However, I can't seem to find where this path is set. I've looked at a bunch of the files that make up the validation script, but they seem to point to compiled JAVA files that can't be edited.
Anyone have any ideas around where I can correct this path?
Of note, Essbase Studio does in fact work, I just want to fix this validation script so that any real issues will be pointed out.
thanks
Edited by: PtotheC on Jan 20, 2010 4:12 PM

Also, this error causes it to FAIL the validation that is generated.
Essbase Studio is RED in the HTML that is generated.
I would assume if it is common, other people would be noticing that too?

CFP-2110 will only boot into safe mode + communication error?

Hello all,
I have a new cFP-2110 and I'm trying to configure it. I'm using Realtime 8.0, Fieldpoint drivers 5.1.2 on WIndows XP. My host computer versions match the FP controller software version and the safe-mode dip switch is in the 'off' position.
I even re-formatted the controller memory (like someone suggested in a different thread) but I keep getting the same thing: Connected - Safe Mode (Improper Installation)
Attached is a screen shot of the error I get when I try to 'find devices.' I have a good ethernet connection (although I have a yellow blinking LED on the RJ45 of the controller but not the green). I know this because I can reboot the controller from the host - It just always reboots into safe-mode. Does anybody have any suggestions for me?
Thanks - Paul
Attachments:
cFP-2110 error.JPG ‏365 KB

I finally found the problem and thought I'd share in case anyone else has similar issues:
In troubleshooting I wanted to eliminate network communication errors so I decided to connect directly to my host PC. I got a crossover ethernet cable and connected straight to my host PC's ethernet card. I had to log in as administrator on the host in order to change it's IP address to a static address. Then I re-formatted the FP controller, re-assigned it's IP and finally re-installed the RT and FP drivers. Finally - I had a normal connection!
This made me wonder if it was being directly connected to the host or being logged in as an administrator that was the fix. So I went to a second host PC, logged in as administrator (leaving it as a normal network connection), reformatted my second controller and re-installed the software - and hot damn - it worked!
Moral of this story is - be logged in as admin. before attempting to install any software...

Start Essbase Studio Error

Dear all,
I'm very new to hyperion. I installed foundation services, essbase and planning and configured them. then i installed essbase studio through EssbaseStudioConsole and started the system using Start EPM System. When i run EPM System Diagnostic, everything passed except for this error:
FAILED ESS: Essbase Studio Server Validating Essbase Studio Server connection
Error: Network communication with the server failed. Check your network connection and try again.
Recommended Action: Start application
1 second
What could cause such an error?I am looking for what stuff in the environment that Essbase Studio depends on, but cannot find an.
Any help is much appreciated,
Zain

Thanks people for the replies.
I'm using Hyperion 11.1.2.2 on Windows 2008 SP2 32 bits and Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production. the database resides on a different server and i have only the DB client installed on the same machien as the hyperion applications. This is not a fresh installation, i did one before but failed so i formatted the driver where i installed hyperion. i'm not using any patches
Yes, the service Hyperion Studio Service BPMS bpms1 is started.
when i checked the Essbase Studio log, i found this:
[2012-08-07T05:25:41.728-07:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.util] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] [SRC_CLASS: com.hyperion.cp.util.PropertyManager] [SRC_METHOD: loadProperties] Server configuration file: D:\INSTALL07082012\user_projects\epmsystem1\BPMS\bpms1\bin\server.properties.
[2012-08-07T05:25:41.822-07:00] [hyperion] [NOTIFICATION] [ESSSTD-183054] [com.hyperion.cp.server] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Logger configuration file: D:\INSTALL07082012\user_projects\epmsystem1\BPMS\bpms1\bin\logging.xml.
[2012-08-07T05:25:41.822-07:00] [hyperion] [NOTIFICATION] [ESSSTD-183044] [com.hyperion.cp.server] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Starting up.
[2012-08-07T05:25:41.822-07:00] [hyperion] [NOTIFICATION] [ESSSTD-183045] [com.hyperion.cp.server] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Oracle Essbase Studio Server. Version 11.1.2.2.100, Build 2175, March 23 2012. Copyright © 2008 - 2012, Oracle. All rights reserved
[2012-08-07T05:25:51.025-07:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11002] [oracle.EPMAUDITCLIENT] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] Client Enable Status false
[2012-08-07T05:25:51.025-07:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11000] [oracle.EPMAUDITCLIENT] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] Audit Client has been created for the product HUB-11.1.2.0
[2012-08-07T05:25:52.322-07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: <init>] Failed to load driver for sap.
[2012-08-07T05:25:52.322-07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: <init>] Failed to load driver for teradata.
[2012-08-07T05:25:52.322-07:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: <init>] Failed to load driver for netezza.
[2012-08-07T05:25:53.166-07:00] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: DC-HYPERIONT01] [nwaddr: 10.0.41.33] [tid: 10] [userId: system] [ecid: 0000J^133YV7a60_zxw0yW1G8G_5000000,0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage=Cannot initialize catalog storage. Make sure the server.properties file contains the correct information.[[
com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog.CatalogInitializationException.StorageInitializationFailure
     at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:235)
     at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)
     at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:106)
     at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:194)
     at com.hyperion.cp.catalog.Catalog.<clinit>(Catalog.java:81)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)
     at com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1318)
     at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:184)
     at com.hyperion.cp.server.RequestListener.<init>(RequestListener.java:130)
     at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:209)
     at com.hyperion.cp.server.ServerMain.main(ServerMain.java:289)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:229)
     ... 12 more
Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: The database 'System' does not contain Studio Catalog tables. Please verify the value of the parameter 'catalog.db' in server.properties file.
     at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:151)
     at com.hyperion.cp.catalog.storage.StorageEngine.<init>(StorageEngine.java:95)
     at com.hyperion.cp.catalog.storage.SQLStorageEngine.<init>(SQLStorageEngine.java:20)
     ... 17 more
Many thanks again :)

Error in access with Essbase Studio Console

We get error to connect with Essbase Studio Console.
"children for Root. Reason: Unknown package name 'drillthrough'.Line = 1."
It is a new installation.
EPM 11.1.2.2

Hi,
During the installation of Essbase Studio only, ess_es_server.jar and ess_japi.jar are missing. If you install both Essbase and Studio, they are not missing.
This is due to unpublished bug 14232814 - DURING THE INSTALLATION ONLY STUDIO SOME .JAR FILES NOT INSTALLED
Try the following:
Stop Essbase Studio
copy files into EPMSystem11R1\common\EssbaseJavaAPI\11.1.2.0\lib
ess_es_server.jar
ess_japi.jar
If folder does not exist create it.
1. Stop essbase Studio.
2. Drop tables from relational database
3. Recreate tables.
4. Start Essbase Studio.
Scripts for dropping & recreating catalog located under
oracle\middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\database\common\db_name
Hope it helps....
KosuruS
PS: If the above information is helpful, mark it :)

Essbase Studio Error in 11.1.2.2

Hi Everyone,
I have installed hyperion 11.1.2.2 in windows 2008 Server and configured sucessfully however when i click on essbase studio console i am getting the below error.
A javaruntime environment (JRE) or java development kit (JDK) must be available. No Virtual Machine was found after searching the following locations.
C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\Essbasestudio\console\jre\bin\javaw.exe
javaw.exe is current path.
i don't see the javaw.exe file in the above path. Kindly help me in this.
Regards,
AS

If you edit
<MIDDLEWARE_HOME>\EPMSystem11R1\products\Essbase\EssbaseStudio\Console\startStudio.bat
then you will probably see "set JAVA_HOME=..." is pointing to an incorrect location
As the Studio console is 32bit then it needs to point to a 32bit JRE e.g.
set JAVA_HOME="E:\Oracle\Middleware\EPMSystem11R1\common\JRE"
Cheers
John
http://john-goodwin.blogspot.com/

Error while deploying Essbase studio

Hi All,
I need some help with the studio deployment error. I have created a bat script to run Maxl which will deploy essbase studio, then create some user defined measures using rules files and then calculation.
When I ran the batch script first time, it was successful. Now its giving me the following error :
BPM Connect Status: Success
Failed to deploy Essbase cube.
Caused by: Cannot begin incremental build. Essbase Error(1007151): Wrong incremental dimension build sequence
BPM maxl deployment ...failure.
Please help
Thanks

There is no issue for BSO cubes. Internally the BSO outlines are different from ASO cubes and this restriction does not appear in them. For ASO cubes, the problem is caused by deleting and readding dimensions. If you do incremental builds on dimensions, you will not have the 255 dimension issue, but the ASO outline will still grow. So the compaction utility in EsscmdQ is still valid for that.

Error in deploying the cubes in Essbase Studio

I am getting below error when I try to depoly ASO cubes in Essbase Studio.
***Failed to deploy Essbase cube***
***Caused By: Error when retrieving data from SQL source***
***Caused By: Error when retrieving data from SQL source***
***Caused By: [Hyperion][DB2 JDBC Driver]SQLDIAGGRP was specified and not null.***
I also checked the error log generated in the applications asking to increase the NETDELAY and NETRETRY COUNTS in ESSBASE.CFG, the config file. I made those changes, restarted the services and deployed again but in vain.

There have been a number of MaxL bugs with encryption that produce 'Parse error near...' messages. If you login to Oracle Support and search the Knowledge Base on 'Parse error near' you will find them. I can't see anything specifically relating to 11.1.2.1 or a known defect in the release notes... ...I'd get a support ticket raised, if you haven't already.
You don't mention platform, but I've also run into a bug running 'deploy' in 11.1.2.1 on a 64-bit Windows environment and there was a Unix bug too, but they both caused crashes so probably aren't your problem.

Essbase Studio Alternate Hierarchy Creation error

Hi All,
I'm using Essbase Studio to create an alternate hierarchy. I have a dim which has shared members and I'm getting the following error msg during cube deployment:
1. Record #1- Member Name (SKU) already used i.e. the member for which I m trying to create shared member
     I m following the same procedure mentioned in the user guide i.e.
        Step1: create a copy of the dimension element that you want to designate as a shared member(Renamed SKU_copy with SKU_Diet). By making a copy, the binding expression for this element is the same as the original dimension element (SKU_Diet).
       Step2: when you create the second hierarchy in the chain, which is the alternate hierarchy, add a user-defined membas the parent and add the new dimension element (SKU_Diet) as the child, which will be the shared member.
     Even I m able to see the shared members (SKU_Diet) under user defined member "Diet" under the preview window (both by key binding and caption binding) as wel..
     But I m unable to see the shared members in EAS console after deploying the cube from Essbase Studio to EAS Console.
I m not able to understand what I m missing exactly,.and suggest me other ways as well for creating alternate hierarchies in Essbase Studio.
Thanks in advance..!!

looks like similar issue..
https://forums.oracle.com/thread/1555956
It will work in genaration 2 not in genration 1.
Thanks,
mady

Network Communication Error in Essbase Studio

Similar Messages

Maybe you are looking for