Network magic won't run on one of my computers "not on primary network" error

I can't get NwMagic to run on my desk top computer and i get the error listed above.  I have no idea what this means or how to correct it.

Hi Ligon, and a warm welcome to the forums!
Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply
And to possibly answer your other closed question, I'm not sure if it runs on 10.3 or not, I think it did in the past, but SecuritySpy...
http://www.bensoftware.com/ss/

Similar Messages

  • Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow.  Any help anywhere?

    Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow.  Any help anywhere?

    wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
    Paul

  • I've got a serial number for Contribute but it won't activate on one of our computers. Right now we have to use the 30 day trial. Why doesn't it work?

    I've got a serial number for Contribute but it won't activate on one of our computers. Right now we have to use the 30 day trial. Why doesn't it work? Marianne Stanton, The Inquirer and Mirror, Nantucket, MA: Sign in: [email protected]

    Here's the serial number I have and have used on other machines:
    < Removed by Moderator >
    "This serial number is not valid for this product."
    OS 10.7.5
    Contribute 6.5
    Greg Derr
    <Removed by Moderator>

  • How can I manage 1 iTunes library with 2 computers (not on same network)?

    I have 1 very large iTunes library in which I am always adding/deleting/editing songs and 2 computers (1 home, 1 laptop). I would like to be able to manage my library with my laptop when I am away from home but also be able to see any changes I made next time I open iTunes on my home computer. I tried home sharing but this seems to be more for computers on the same network. My library is much too big for iCloud. Someone suggested I hold shift when I open iTunes to select a library but even though I can select the library file I want, it doesn't populate iTunes with my changes (or any music for that matter). I'm running XP with the latest version of iTunes (10.7.0.21). Thanks

    This describes a work/home scenario.  For home/away use, edit the library directly on the portable backup when away, then sync libraries on your return.
    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organized within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organized) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behavior has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
    tt2

  • One of the computers on my homesharing network is automatically downloading purchases even though settings are not checked for this to occur?  What am I missing here?  BTW only one of the three computers (pc) is doing this.

    We have three computers (two pcs and one mac) on our home sharing network. When I buy a song on my pc it is automatically downloading it to my husband's pc - but not my daugher's mac.  The settings on each library do not indicate any items should automatically download.  What am I missing here?  This is  a relatively recent thing I just noticed.  It was not always happening in this way.  Help.  Both pcs are on Windows 7.  Thanks in advance for any help.  My husband and I don't always like the same songs so I need help to get back to marital bliss....

    I think I found the answer to my own problemin case anyone experienced the same thing.  There is a separate spot in itunes under preferences to allow for automatic downloads from other devices.  It seems unrelated to home sharing.  I unchecked the boxes under the "store" section and that appears to have taken care of the issue.

  • I downloaded Mavericks while I had an Age of Empires disk inserted; before installing, I saw a notice that Age of Empires won't run with Mavericks so I did not install, but now, using every trick I know the disk will not eject.  Advice?t

    Why won't Age of Empires disk not eject after downloading but not installin Mavericks?

    here is pretty much every option:
    Force eject a stuck cd/dvd
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • My VSB program won't run in XP. No clue why (no crash, no error.)

    I've written other programs that run under XP/7/8 just fine. But this latest project, when I run it under XP (from a VM), nothing happens.
    No error. No crash. It just never runs! I tried setting the .Net Framework to 3.5 as always (though it really doesn't need .Net), but it made no difference.
    Any ideas why? Are there controls XP just doesn't support? My first app to use "ListView" and "ObjectList" objects if that matters. :(
    App runs perfectly under Win 7 & 8.

    VS 2013 cannot be installed on Windows XP.  Neither can VS 2012.  If you try to run a program created with VS 2012 or 2013 in Windows XP, it will not work!.  It is simply not compatible.  You need to recreate the program from scratch
    in VS 2010 in order to run it in Windows XP.
    I am running both Windows XP and Windows 7 on the same computer, with 2 partitions.  I am more comfortable with Windows XP, but was required to use the newer version of VS for school.  When I tried to install VS 2012, it refused.  I had no
    other choice but to use Windows 7, and I am going back and forth between the 2 operating systems.  That's how I was able to answer your question.
    Solitaire
    Solitaire,
    Are you saying that if you create a program in the latest version of VS, even if you target an earlier version like framework 3.5
    and also set it to compile for x86 (32-bit), that it will not work on XP?
    If so then that make no sense, but ... I don't know.
    Still lost in code, just at a little higher level.

  • ITunes won't run because a required component is not installed

    I think a Quicktime upgrade went wrong and now I can no longer open my iTunes and this message appears:
    "The itunes application could not be opened. a required iTunes component is not installed. Please repair or reenstall Quicktime (-42404)"
    I have tried uninstalling and reinstalling Quicktime but it still does not work, and I don't want to risk losing my 50GB of music..
    Thanks in advance

    Download iTunes 11 from the Apple site and reinstall. The error message was quite plain in telling you what to do to resolve the error.

  • Can I setup a folder on the time capsule for sharing between computers not on my network?

    I'm wanting to be able to share files between family members that don't live in the same household. How would I set up a single folder on my Time Capsule so everyone can use it as a shared network drive between Windows and Mac systems, with security?

    No.  Your Mac will mirror the folders on icloud.com.

  • Freezes every time it is open on one of our computers (not all).

    Started after Firefox updated on Wednesday.

    The C3150 has a sensor and it is not necessary to scan the alignment page for this model.  Make sure you are using fresh white paper for the alignment  Page 16 of the manual says:
    Note If you have colored paper loaded in the input tray when you align the print cartridges, the alignment will fail. Load unused plain white paperinto the input tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor or print cartridge. Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
    Before calling HP support I would try cleaning the sensor with a damp Q-tip.  The sensor is a small black plastic item mounted on the lower right side of the carriage, toward the back and just to the right of the right cartridge.  The part to clean would be the area underneath the sensor.
    Regards,
    Bob Headrick, MS MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to delete screenshots in Network Magic 5.5?

    I am running Network Magic version 5.5.9195.0 on my home network. One of its features is the ability to take desktop screenshots of connected computers. NM will store up to 100 screenshots before overwriting the oldest ones. Rather than accumulating screenshots which are not relevant anymore, I like to delete the ones I have no need for anymore. That way I also save HDD space.
    The screenshots are stored in the following location:
    C:\Documents and Settings\All Users\Application Data\Pure Networks\Platform\ScreenCaptures
    However, deleting screenshots does NOT remove them from the Past Screenshots list in Network Magic. Hence my question: how do I not only delete screenshots from my computer, but also from the Past Screenshots list in Network Magic? I opened a ticket for this question with Pure Networks, but they closed it without a conclusive answer...

    Flevokiwi wrote:
    I am running Network Magic version 5.5.9195.0 on my home network. One of its features is the ability to take desktop screenshots of connected computers. NM will store up to 100 screenshots before overwriting the oldest ones. Rather than accumulating screenshots which are not relevant anymore, I like to delete the ones I have no need for anymore. That way I also save HDD space.
    The screenshots are stored in the following location:
    C:\Documents and Settings\All Users\Application Data\Pure Networks\Platform\ScreenCaptures
    However, deleting screenshots does NOT remove them from the Past Screenshots list in Network Magic. Hence my question: how do I not only delete screenshots from my computer, but also from the Past Screenshots list in Network Magic? I opened a ticket for this question with Pure Networks, but they closed it without a conclusive answer...
    Hi Flevokiwi,
    Best solution for right now, is to uninstall Network Magic. Reboot. Use Explore to delete the remaining folders of Network Magic. Run Disk Cleanup. Reboot and reinstall Network Magic. Use your other copy of Network Magic to reactivate the reinstalled copy of Network Magic.
    This was asked before and no one from Network Magic Beta Forums had any other answer.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • EasyLink Advisor and Network Magic together - Why?

    I am running a Toshiba laptop with Windows XP(MCE) SP3, wireless on a home network with a WRT300N V1.1 router - conecting this laptop, Lexmark X4550 wireless printer, a PS3(80), 3 PSP's, a desktop HP running Windows SP2 with a USB g adapter.   I have updated LELA to (Version 3.11 build 9139.94 Platform version: 11.2.9195.1); and Network Magic to (Version: 5.5.9195.0-Pure0 Platform version: 11.2.9195.1 Updated 8/19/2009).  I am running a Clearwire wireless broadband modem to the internet and the back of the router.  So far, everything seems to be running fine.
    My question is why am I running two different systems from Linksys to manage my router?  Do I need both of them, even though they seem to be a little different? Which one is the future standard for Linksys?  Do I lose anything by deleting one of them, or do I gain anything by keeping both of them?  They do not seem to interfere with each other - it is just confusing.
    LELA seems to be the better one now that both have been upgraded to the newer sotware.
    Please advise.  Thanks... 
    Toshiba Satellite P105-S0684 laptop with Windows XP(MCE) SP3, Intel Pro/100 VE wired and Intel Pro/Wireless 3945ABG wireless. Network with a WRT300N V1.1 router (Firmware version V1.51.2) - conecting this laptop, Lexmark X4550 wireless printer, a PS3(80), 3 PSP's, a desktop HP running Windows XP(Pro) SP2 with a USB g adapter. I have updated LELA to (Version 3.11 build 9139.94 Platform version: 11.2.9195.1); and Network Magic to (Version: 5.5.9195.0-Pure0 Platform version: 11.2.9195.1 Updated 8/19/2009). I am running a Clearwire wireless broadband modem to the internet and the back of the router.

    toomanydonuts wrote:
    My understanding is that there should be no port scan attempts coming through the router.  Normally all the router's ports are closed, so no port scan should be coming through the router.
    That's my understanding as well, but, unfortunately, I am still getting ports being scanned from remote IPs. :-(
    Possible sources for this would be:
    1)  another computer on your network is sending out the port scan
    2)  a wireless printer on your network is opening ports  ( I have an HP wireless printer that does this).
    3)  someone is connecting wirelessly to your network, and scanning ports
    1) I only have one computer.
    2) Believe it or not I don't have a printer. :-)
    3) The router is connected to my computer via ethernet cable, so (I assume) I have (hopefully) turned off the wireless part of the router.
    To verify that the router's ports are closed, go to Gibson Research at grc.com , and click on the "Shields UP!" test.  Scan your ports and see if any of them are open.  The Shields UP! program WILL do a port scan, so you can also see if your computer's firewall complains during this test.
    I have done the above and the ports that "Shields Up" scans are stealthed.
    If you do find ports open, the most likely cause is a program, running on one of your computers, that is opening ports.
    All the programs that I use I have used for a number of years.  With the D-Link router that I used I did not have this "problem".  Having said that I am not interested in going back to the D-Link router.  Hopefully this problem that I am having with my Linksys router can be rectified. :-)
    Report back with the results of the scan.
    Message Edited by toomanydonuts on 01-23-2008 02:02 AM
    Thank you very much for your help toomanydonuts!!!
    Servalan

  • Major instability with Network Magic for Mac

    First of all, I'm a long time LELA user which has been great for quickly gaining an understanding of what is connected to the network.  I like being able to see both connected and disconnected devices. 
    I thought I would give Network Magic a shot since that is where the future direction is headed.  It has great potential but right now is a major pain in the rear.  I have a rather large home network with roughly 15 devices connected or disconnected at any given time.  At first the network map worked like LELA in that it would show all devices disconnect or connected.  I have two Mac laptops that have different IP and MAC addressses depending on whether they are connected via wired or wireless.  
    After installing the Mac client on both Mac laptops that's when the frustration began.  It seems that with the Mac client software running on both Macs NM5.5 only wants to recognize one on the map at a time.  Every few minutes I get an alert that a new device has been detected.  But what really happens is the existing laptop drops off the map and the other will pop on.  On the Mac itself it automatically triggers the Network Magic screen to popup which is a major annoyance.  A few minutes will go by and then the process repeats itself.  This laptop will drop of the network map and the other will pop back on.  Again, this pops up the Network Magic window on the 2nd laptop which is an annoyance. 
    Furthermore, when one laptop drops off the... printers that are shared from another Windows PC are no longer available and accessible on the Mac.  Rest assured... waiting another few minutes the process will repeat itself.  
    The other major downside is after installing the Mac clients the network map only shows the name of the Mac laptop and is always recognized as one device regardless of IP or MAC address.  I no longer have two seperate IP/MAC devices showing on the map depending on whether it is a wired or wireless connection.    I cannot look at the map and quickly know whether the device is connected via wire or wireless.  Thus when I print a hard copy of all my network devices and settings I dont' get to see the MAC address and details for the non-connected MAC/IP.  
    Finally, the Mac client does not have the ability to "generate daily computer reports" of the usage.  
    At this point I am forced to uninstall the Mac clients until a solution for this problem is provided.  I'm glad I checked out the trial version first!

    Also for the Linksys folks... I'm not sure how all of the below information is relevant but if it gets you to resolve the problems and add the necessary features then great:
    Your Network Magic Version installed: 5.59195
    The type of connection to the Internet: Cable
    The Brand of Modem and its Model Number the router is connected to: Some Toshiba POS from Time Warner
    The Brand, Model, Hardware Revision of your Router and include the Firmware Version: WRT310N with firmware 1.0.07
    The Method of connection your problem computer has to the Router: Both wired and/or wireless
    The Connection in use on the problem computer: Both an Ethernet port and the wireless N adapter in a MacBook Pro 17" Unibody and a Macbook 13" Core2Duo
    Operating system and version and Service Pack Level, if any.Vista on the main Windows machine and OSX Snow Leopard Developer Preview (OSX 10.6) on both Mac laptops
    Software Firewall in use: None
    Also if any Anti-Virus Program or Spyware Program: None
    Include your location in the post or fill out your Profile for this forum and include the location. Kansas City, MO , USA
    Post the link to your Router Model: Linksys WRT310N
    Network Topology is as follows:
    NETWORKING GEAR
    Main Gateway: Linksys WRT310N in Wireless N Mode only using WPA2 AES security on channel 1
    Additional Router: Linksys WRT54G v5 with latest firmware running in Mixed Mode B/G with WPA  Personal   security  on channel 11
    Access Point: WAP54G v3 (I think) running in Mixed Mode B/G with WPA Personal security on channel 11 (several floors below the WRT54G setup in repeater mode connecting wirelessly only
    NAS GEAR
    Netgear ReadyNAS NV+
    PRINTING GEAR
    Linksys WPS54G Wireless G Printer Sever (hands down the worst piece of equipment manufactured by Linksys, the wireless part doesn't even work so I run it wired).  HP LaserJet 1200 is attached to it
    HP Photosmart All in One C6150 connected via the wireless G WRT54G router
    HP Photosmart 370 (Shared via main Windows desktop)
    HP Photosmart 8750  (Shared via main Windows desktop)
    GAMING CONSOLES
    XBOX 360 (connected via the Wireless G Network: WRT54G and WAP54G)
    Wii (connected via the Wireless G Network: WRT54G and WAP54G)
    MOBILE DEVICES
    2 iPhones via wireless G network (WRT54G and WAP54G)
    COMPUTERS
    Windows Desktop running Vista SP1.  This is where the main version of Network Magic 5.5 runs and is wired into the network
    17" MacBook Pro Unibody via wired or wireless depending on location.  Wireless connects ONLY to the WRT310N in N mode
    13" MacBook Core 2 Duo via wired or wireless depending on location.  Wireless connects ONLY to the WRT310N in N mode

  • Network Magic & WRT320N

    I can not seem to set up security with my WRT320N and Network Magic. When I try to set up security and it says my router security is not enabled. I have entered my router settings and nothing seems to help. My problem is I have a lot of intruders that are logging into my wireless network and it is freezing a program that I am running on one older PC. I finally gave up after using the support line with linksys several times.Thanks for any guidence in this matter.

    sadievan123 wrote:
    I have a wrt320n and am having trouble with web pages being slow to load and also dropping.  I get a message 'Problem loading page'  'The connection to the server was reset while the page was loading.' 
    Also have an HP c309a printer that the router is messing up.  The printer hangs up if its been idle for a while.  Have to unplug it to get it to work again.  If I unplug the router from the printer, it works fine.
    Do you think uninstalling Network Magic will fix these problems?
    Is there any reason to keep Network Magic installed?
    Thanks,
    Carol
    Hi Carol,
    Network Magic is a Network Monitoring Tool and helps makes Sharing Folders and Printers easier.
    You don't need Network Magic installed. However all changes you made with Network Magic, like Sharing files and folders as well as Printers will be undone.
    Please Read BEFORE YOU POST and post back with the requested information, including unplugging from the Router. How is it plugged into the Router?
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • Please help, CS3 won't run with 10.5.2!  Please!

    Installed 10.5.2 on my g5 dual 2.5 w 4.5 gigs ram (NOT) intel. Now my AE projects won't run. One started to and then quit. This is major for me. Involves dozens of projects. Please help.

    Yes, my powerbook is also trouble-free.
    But it's just too slow to run AE on.
    And yes, yes, I did repair permissions. I did everything including a "safe" starup, repair permissions many many times, etc. etc. etc.
    I'm beginning to think the problem with AE was with non-ae plugins. But then why did automator and software update cease to work?????

Maybe you are looking for