I downloaded Mavericks while I had an Age of Empires disk inserted; before installing, I saw a notice that Age of Empires won't run with Mavericks so I did not install, but now, using every trick I know the disk will not eject.  Advice?t

Why won't Age of Empires disk not eject after downloading but not installin Mavericks?

here is pretty much every option:
Force eject a stuck cd/dvd
First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

Similar Messages

  • I down loaded an app, used it, but now its gone.  No on the ipad and not in itunes.  where could it be?  And, can I re-download it w/o having to pay again.  Thanks

    I down loaded an app, used it, but now its gone.  No on the ipad and not in itunes.  where could it be?  And, can I re-download it w/o having to pay again.  Thanks

    As long as it's still available in the store and you use the same iTunes account as you originally used to buy it then yes, you can re-download it for free : http://support.apple.com/kb/HT2519

  • Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks.

    My Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks on the left side. I am running Lion. How do I get this to charge and turn on? Thanks

    If your model Macbook Pro is the calibrating model, let the battery calibrate. 
    If not, and are still under warrant or have Apple Care, give them a call and get a case number.  Otherwise, take the computer to an Apple store or an AASP.  Whichever is more convenient for you. 

  • I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
    Final Cut Studio 2 (Including Final Cut Pro 6)
    • A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    • 1GB of RAM
    • An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    • A display with 1024-by-768 resolution or higher
    • Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
    • QuickTime 7.1.6 or later
    Additional Recommendations
    • 2GB of RAM when working with compressed HD and uncompressed SD sources
    • 4GB of RAM when working with uncompressed HD sources
    • A display with 1280 x 1024 resolution or higher
    Additional Requirements for Motion
    • A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
    • A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
    • For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
    Additional Requirements for Color
    • The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
    • ATI Mobility Radeon X1600
    • ATI Radeon X1600
    • NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
    • For 32-bit rendering: a graphics card with at least 256MB of VRAM.
    • A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
    • A three-button mouse for full functionality
    Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

  • I bought the Snow Leopard Update but now my macbook wont even accept the DVD and keeps ejecting it. This is the same for all DVDs.

    I have a very old (refurbished, bought over 4 years ago) macbook pro 15". It's been running ok on OS X 10.5.8 until very recently. It started ejecting disks, and then the new adobe flash player update wouldn't work. Lots of other little things have been happening as well.
    I had been considering buying a new macbook, but one of the Apple store people suggested I update instead (a much cheaper alternative!). So I bought Snow Leopard, and it arrived in the post today. But now my macbook wont even accept the dvd. It takes it in, whirs and complains a bit (for less than 60 seconds) then ejects it again. I have tried cleaning the disk, cleaning the disk area with a credit card + lens cleaner (a trick I saw recommended on this forum). But no luck.
    Any advice?
    I am a trainee teacher and actually will be gutted to have to get a new laptop (as I really cant afford it). BUT obviously if I have to I will. I just need to extend the life of this one for as long as possible, until I have more money to get a better one!

    Bring your MBP to an Apple store genius bar and see what they say about your MBP optical drive. 
    Look on the OWC web site.  They sell optical drives for older MBPs.  Perhaps there is one that will fit yours.  Installing one is not brain surgery.
    Otherwise examine the iFixit.com and Powerbookmedic.com web sites for replacements.
    Ciao.

  • Ask your question.please help itunes will not launch on my computer the icon on desktop has changed to a white folder no error message appears and it appears but then disappears in task manager when the programme will not open quick time is working

    please help i need to fix my itunes it will not launch on my computer . no error message appears it simply will not run. the icon on desktop has changed to a white folder and it still appears in programmes in start menu but will not open. it appears in task manager but disappears when the programme will not open

    You music etc should not be affected by problems with the iTunes program, nevertheless it is always a good idea to backup your data.
    You haven't said if there was any error message when you tried to start iTunes. If  there was one please give it in full.
    Also check to see if QuickTime works, iTunes can not work without it. If QuickTime doesn't work, it has to be fixed before worrying about iTunes.
    Then restart your PC and open your Task manger and select the Processes tab.
    Try to start iTunes, does iTunes.exe appear on the processes tab? If so does it disappear again or remain although the programs does not open?

  • HT4623 I clicked on an e-mail and now my IPad is stuck and the screen will not convert back to my e-mail list. How do I get the screen to go back to my original mail list?

    My mail screen will not convert to the original mail listings. this happened when I clicked on an attachment sent with an e-mail. How can I get the mail screen unstuck?

    Hi donna Ifromwa,
    Thanks for visiting Apple Support Communities.
    If your iPad is unresponsive after clicking on an attachment and you cannot return to your email inbox, I recommend forcing the attachment and Mail app to close using this method:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app's preview up to close it.
    These steps come from this article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If you still cannot access your email, restart your iPad next:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Regards,
    Jeremy

  • I got my replacement phone two hours ago and the left ear of my headphones aren't working this was a problem i chose to ignore with my original iphone 5 but now its really aggravating why is the left earpod not working on any type of headphones?

    Why isn't my left earpod working?

    Hard to know, have you tried a full reset and restore on the phone yet?

  • Windows Server 2008 R2 - You might not have permission to use this network resource. The request is not supported.

    Hello !
    I have a server with Windows Server 2008 R2 (AD, File Server, DNS Server and DHCP Server) that not access network share other Domain Controller.
    Well, is very crazy.
    I view network shares by network computers and devices,
    but not \\domain_controller or \\IP_domain_controller.
    I execute ping for succeed for all servers.
    Follow error bellow:

    irectory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       * Verifying that the local machine SRVMTZDC01, is a Directory Server. 
       Home Server = SRVMTZDC01
       * Connecting to directory service on server SRVMTZDC01.
       * Identified AD Forest. 
       Collecting AD specific global data 
       * Collecting site info.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
       The previous call succeeded 
       Iterating through the sites 
       Looking at base site object: CN=NTDS Site Settings,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       Looking at base site object: CN=NTDS Site Settings,CN=BEL,CN=Sites,CN=Configuration,DC=shcorp,DC=local
       Getting ISTG and options for the site
       * Identifying all servers.
       Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
       The previous call succeeded....
       The previous call succeeded
       Iterating through the list of servers 
       Getting information for the server CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC05,CN=Servers,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC06,CN=Servers,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC13,CN=Servers,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC07,CN=Servers,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC08,CN=Servers,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC09,CN=Servers,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC12,CN=Servers,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC04,CN=Servers,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVDC10,CN=Servers,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       Getting information for the server CN=NTDS Settings,CN=SRVRCFDC11,CN=Servers,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local 
       objectGuid obtained
       InvocationID obtained
       dnsHostname obtained
       site info obtained
       All the info for the server collected
       * Identifying all NC cross-refs.
       * Found 12 DC(s). Testing 1 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\SRVMTZDC01
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             Determining IP4 connectivity 
             * Active Directory RPC Services Check
             ......................... SRVMTZDC01 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\SRVMTZDC01
          Starting test: Advertising
             The DC SRVMTZDC01 is advertising itself as a DC and having a DS.
             The DC SRVMTZDC01 is advertising as an LDAP server
             The DC SRVMTZDC01 is advertising as having a writeable directory
             The DC SRVMTZDC01 is advertising as a Key Distribution Center
             Warning: SRVMTZDC01 is not advertising as a time server.
             The DS SRVMTZDC01 is advertising as a GC.
             ......................... SRVMTZDC01 failed test Advertising
          Test omitted by user request: CheckSecurityError
          Test omitted by user request: CutoffServers
          Starting test: FrsEvent
             * The File Replication Service Event log test 
             ......................... SRVMTZDC01 passed test FrsEvent
          Starting test: DFSREvent
             The DFS Replication Event Log. 
             Skip the test because the server is running FRS.
             ......................... SRVMTZDC01 passed test DFSREvent
          Starting test: SysVolCheck
             * The File Replication Service SYSVOL ready test 
             File Replication Service's SYSVOL is ready 
             ......................... SRVMTZDC01 passed test SysVolCheck
          Starting test: KccEvent
             * The KCC Event log test
             Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
             ......................... SRVMTZDC01 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
             Role Domain Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
             Role PDC Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
             Role Rid Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
             ......................... SRVMTZDC01 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             Checking machine account for DC SRVMTZDC01 on DC SRVMTZDC01.
             * SPN found :LDAP/SRVMTZDC01.shcorp.local/shcorp.local
             * SPN found :LDAP/SRVMTZDC01.shcorp.local
             * SPN found :LDAP/SRVMTZDC01
             * SPN found :LDAP/SRVMTZDC01.shcorp.local/SHCORP
             * SPN found :LDAP/9956d321-332f-482c-855c-8bceee885bb6._msdcs.shcorp.local
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/9956d321-332f-482c-855c-8bceee885bb6/shcorp.local
             * SPN found :HOST/SRVMTZDC01.shcorp.local/shcorp.local
             * SPN found :HOST/SRVMTZDC01.shcorp.local
             * SPN found :HOST/SRVMTZDC01
             * SPN found :HOST/SRVMTZDC01.shcorp.local/SHCORP
             * SPN found :GC/SRVMTZDC01.shcorp.local/shcorp.local
             ......................... SRVMTZDC01 passed test MachineAccount
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC SRVMTZDC01.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=shcorp,DC=local
                (NDNC,Version 3)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=shcorp,DC=local
                (NDNC,Version 3)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=shcorp,DC=local
                (Schema,Version 3)
             * Security Permissions Check for
               CN=Configuration,DC=shcorp,DC=local
                (Configuration,Version 3)
             * Security Permissions Check for
               DC=shcorp,DC=local
                (Domain,Version 3)
             ......................... SRVMTZDC01 passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share \\SRVMTZDC01\netlogon
             Verified share \\SRVMTZDC01\sysvol
             ......................... SRVMTZDC01 passed test NetLogons
          Starting test: ObjectsReplicated
             SRVMTZDC01 is in domain DC=shcorp,DC=local
             Checking for CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local in domain DC=shcorp,DC=local on 1 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local in domain CN=Configuration,DC=shcorp,DC=local on 1 servers
                Object is up-to-date on all servers.
             ......................... SRVMTZDC01 passed test ObjectsReplicated
          Test omitted by user request: OutboundSecureChannels
          Starting test: Replications
             * Replications Check
             * Replication Latency Check
                DC=ForestDnsZones,DC=shcorp,DC=local
                   Latency information for 7 entries in the vector were ignored.
                      7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
                DC=DomainDnsZones,DC=shcorp,DC=local
                   Latency information for 7 entries in the vector were ignored.
                      7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
                CN=Schema,CN=Configuration,DC=shcorp,DC=local
                   Latency information for 7 entries in the vector were ignored.
                      7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
                CN=Configuration,DC=shcorp,DC=local
                   Latency information for 7 entries in the vector were ignored.
                      7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
                DC=shcorp,DC=local
                   Latency information for 7 entries in the vector were ignored.
                      7 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC).  
             ......................... SRVMTZDC01 passed test Replications
          Starting test: RidManager
             * Available RID Pool for the Domain is 14100 to 1073741823
             * SRVDC01.shcorp.local is the RID Master
             * DsBind with RID Master was successful
             * rIDAllocationPool is 11600 to 12099
             * rIDPreviousAllocationPool is 11600 to 12099
             * rIDNextRID: 11737
             ......................... SRVMTZDC01 passed test RidManager
          Starting test: Services
             * Checking Service: EventSystem
             * Checking Service: RpcSs
             * Checking Service: NTDS
             * Checking Service: DnsCache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: w32time
             * Checking Service: NETLOGON
             ......................... SRVMTZDC01 passed test Services
          Starting test: SystemLog
             * The System Event log test
             An error event occurred.  EventID: 0x00000422
                Time Generated: 05/02/2014   12:55:01
                Event String:
                The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
    Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following: 
                a) Name Resolution/Network Connectivity to the current domain controller. 
                b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller). 
                c) The Distributed File System (DFS) client has been disabled.
             An error event occurred.  EventID: 0x00000422
                Time Generated: 05/02/2014   13:11:54
                Event String:
                The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
    Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following: 
                a) Name Resolution/Network Connectivity to the current domain controller. 
                b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller). 
                c) The Distributed File System (DFS) client has been disabled.
             A warning event occurred.  EventID: 0x80001083
                Time Generated: 05/02/2014   13:18:00
                Event String:
                TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed
    at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections
    from a given local endpoint to a given remote endpoint.
             An error event occurred.  EventID: 0xC0002719
                Time Generated: 05/02/2014   13:20:41
                Event String:
                DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols.
             An error event occurred.  EventID: 0xC0002719
                Time Generated: 05/02/2014   13:21:03
                Event String:
                DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols.
             ......................... SRVMTZDC01 failed test SystemLog
          Test omitted by user request: Topology
          Test omitted by user request: VerifyEnterpriseReferences
          Starting test: VerifyReferences
             The system object reference (serverReference)
             CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local and backlink on
             CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
              are correct. 
             The system object reference (serverReferenceBL)
             CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
             and backlink on
             CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
             are correct. 
             The system object reference (frsComputerReferenceBL)
             CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
             and backlink on CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local
             are correct. 
             ......................... SRVMTZDC01 passed test VerifyReferences
          Test omitted by user request: VerifyReplicas
          Test omitted by user request: DNS
          Test omitted by user request: DNS
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : shcorp
          Starting test: CheckSDRefDom
             ......................... shcorp passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... shcorp passed test CrossRefValidation
       Running enterprise tests on : shcorp.local
          Test omitted by user request: DNS
          Test omitted by user request: DNS
          Starting test: LocatorCheck
             GC Name: \\SRVMTZDC01.shcorp.local
             Locator Flags: 0xe00031bc
             PDC Name: \\SRVDC01.shcorp.local
             Locator Flags: 0xe00033fd
             Time Server Name: \\SRVDC01.shcorp.local
             Locator Flags: 0xe00033fd
             Preferred Time Server Name: \\SRVDC01.shcorp.local
             Locator Flags: 0xe00033fd
             KDC Name: \\SRVMTZDC01.shcorp.local
             Locator Flags: 0xe00031bc
             ......................... shcorp.local passed test LocatorCheck
          Starting test: Intersite
             Skipping site SAO, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site Default-First-Site-Name, this site is outside the scope
             provided by the command line arguments provided. 
             Skipping site CWB, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site POA, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site RIO, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site VIX, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site SSA, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site FOR, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site BHZ, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site BSB, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site RCF, this site is outside the scope provided by the
             command line arguments provided. 
             Skipping site BEL, this site is outside the scope provided by the
             command line arguments provided. 
             ......................... shcorp.local passed test Intersite

  • Hello i face broblem with my apple id i need to by something with my mastercard but i cant plese ineed to know the reson

    hello i face broblem with my apple id i need to by something with my mastercard but i cant plese ineed to know the reson

    You will need to contact iTunes support for purchasing problems: http://www.apple.com/support/itunes/contact/

  • A few of the photos will not transfer as they are saved as jpeg.rem files

    Hi,
    I'm new to this board and trying to transfer pictures and videos from my Blackberry Bold  (work one with T-mobile) to
    my PC.  I tried to do it by using media card reader and was sucessfully able to most of the files
    but for some reason a few of the photos will not transfer as they are saved as jpeg.rem files
    on my media card. Any ideas why would some of the pictures would be save in a different format
    and any suggestions how to transfer them?
    I have the same issue with the videos..out of 20+ that I have on the device memory i was only
    able to copy about 5 that are in .gp format...rest of them will not open as it appears to be encrypted.
    I also have a blackberry curve (with AT&T) as my personal phone...would it read my media card from the
    Blackberry Bold?
    Thanks!

    Hi guruli
    The .rem files indicate these files are encrypted.  This article should help.
    KB11454 - Encrypted files stored on the microSD media card appear as .rem files
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HT201436 Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me

    Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?

    When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it.  Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off.  If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out.  Hope this helps you out.

  • I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

    I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
    I’m using a PreSonus Firebox audio interface.
    It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard.  I tried different midi controllers, different keyboards, different midi cords, and check midi preferences.  The audio interface is working fine and is recogonized, but the midi doesn’twork.  I re-started the computer several times and then finally it miraculously starts working again.
      I’ve been having to this every day now.  Any help or ideas is very much appreciated.

    I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

  • How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    Hi Celia51510,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I can't tell from your post if you are using a Windows or a Mac Computer.
    Try deleting the iTunes application and redownloading the version you need below:
    iTunes 11.1 Download for Mac
    http://support.apple.com/kb/DL1614
    iTunes 11.1 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Cheers,
    - Judy

  • TS3694 I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

    I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

    Downgrading the iOS is not supported, and likely has caused the problems you are experiencing.
    You'll need to go elsewhere for support.

Maybe you are looking for