Network services

Hi,
We recently changed our operating system from Solaris 2.5.1 to Solaris 10, and I've got a problem with one of our legacy scripts. This one only makes a few checks ( which are all ok ), and launches a simple rsh command to a raid system to stop it ( with a particular user ). Everything seems right, until this rsh which returns the following error messages :
"tcgetaddr: no such device or address<br />
ioctl I_FIND ttcompat: no such device or address"
Note that we do another rsh just before this one, on the local station and this one is ok. This script is also only useful when the station stops, it does nothing on start.
An important point is that this legacy script works fine without being executed during the reboot / halt process ( if I launch it manually, everything is ok ).
I tried to move this legacy script into a service, using dependency feature in case network services are stopped while my script executes, but nothing I tried corrected the problem. I even made a dependency to make my service depend on the zones service, to be sure all network is ok. The service is a transient one ( but I'm a newbie on smf )
Does someone has any idea about what is going on ? And can someone confirm the fact that if my script depends on the zones service, it will stop before it ?
Thanks by advance

Hi,
We recently changed our operating system from Solaris 2.5.1 to Solaris 10, and I've got a problem with one of our legacy scripts. This one only makes a few checks ( which are all ok ), and launches a simple rsh command to a raid system to stop it ( with a particular user ). Everything seems right, until this rsh which returns the following error messages :
"tcgetaddr: no such device or address<br />
ioctl I_FIND ttcompat: no such device or address"
Note that we do another rsh just before this one, on the local station and this one is ok. This script is also only useful when the station stops, it does nothing on start.
An important point is that this legacy script works fine without being executed during the reboot / halt process ( if I launch it manually, everything is ok ).
I tried to move this legacy script into a service, using dependency feature in case network services are stopped while my script executes, but nothing I tried corrected the problem. I even made a dependency to make my service depend on the zones service, to be sure all network is ok. The service is a transient one ( but I'm a newbie on smf )
Does someone has any idea about what is going on ? And can someone confirm the fact that if my script depends on the zones service, it will stop before it ?
Thanks by advance

Similar Messages

  • I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services.   Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

    Not sure if I am doing this right. This is my first time in the support community.
    I imagine what I put in my heading was supposed to go in here.
    I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
    Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

    Why do ISPs insist upon making things so difficult for their customers?
    If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
    http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
    Scroll down to DHCP Settings
    You will need to log in with proper "technician" credentials. They are provided in the above link as
    Username: tech
    Password: t3lu5tv
    ... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

  • Remote access and network services problem

    I have a Mac Pro with two IP configs:
    Ethernet 1: 69.##.##.## /255.255.255.248 [hidden for public forum security]
    Ethernet 2: 10.0.0.20/255.255.255.0
    My primary needs:
    Able to remotely access the Mac via Remote Desktop using the public IP. Local LAN connectivity using 10.##.##.##.
    Setup:
    I have a 10 public IP address from my ISP and using one of the 10 now. Everything pings OK.
    Question:
    How can I customize the network service so that I can select the Ethernet 1 or Ethernet 2 port to use? So far it forces me select Ethernet 1 for all of the services selected. I'd like to use FTP & Web Server & Remote Access on the Ethernet 2 (public). The rest is LAN. I notice that Appletalk is only allowable on a single IP.
    Quick experiment with the Internet sharing using Ethernet 2 (public) to Ethernet 1 failed to provide the desired forwarding result.
    Mac Pro   Mac OS X (10.4.9)  

    I think you need to go further into the settings and define FTP etc. to the specific Ethernet. There are also settings Automatic and where you define your connection. I have a 3 inch book that I will look at to see if they address it. I to plan to do something similar, but haven't got there yet.
    Michael

  • Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'

    I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
    and Server, except the host name.
    connectionString
    ="Data
    Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
    However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
    Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
    of 3 databases. NTA\NS is not listed as a login specific to my target dB.
    My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
    to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
    How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
    add
    name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
    etc.
    Thanks for your time and patience on this Deployment 101 type issue.
    Kurt

    hi,
    You receive either of these error messages specifically when you use integrated security.
    To resolve you can use one of below.
    Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
    Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
    Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
    Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
    Thanx, Mark as answered if you are ok ..

  • HT1178 I bought Time Capsule specifically to back up my computer at work. Only my computer. I completed the steps the best of my knowledge but I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to

    I bought Time Capsule specifically to back up my computer at work. Only my computer. There are many computers within my department. I completed the steps the best of my knowledge but was unsure of which option to click. I clicked "I want to create a new wireless network". At the onset the instructions said I needed to connect with an ethernet cable, which I did. But I have no desire to connect to the internet, print from it, or have others access. I did deselect guest options, and I did put in passwords. But at the end of the process I got the message, "This device & its network services will be temporarily unavailable. Are you sure you want to continue."
    I was worried this would shut me down and I wouldn't be able to continue to work. I don't necessarily need to connect wirelessly. It is connected via ethernet cable from machine to device.
    Can you advise me how to continue? Did I choose the wrong options?

    I bought an external hard drive called "Seagate Backup Plus" From the Apple store to back up everything on my computer and anything new on my computer. It came with Time Machine. The external hard drive disk had 1 or 2 Terabytes. Time Machine says "next backup: When disk is connected." "Oldest backup: July 2, 2014." & Also "Latest back July, 2."

  • Enabling Network Services not working PLEASE HELP

    Hello,
    I created a virtual machine with the Oracle_Developer_Day.ova file downloaded from oracle page in order to test the application express tool.
    I´m trying to ad a webservice reference but getting the error:
    ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-24247: network access denied by access control list (ACL)
    I researched and find out that oracle 11g does not have network services enabled so you have to enable them with the following script:
    DECLARE
    ACL_PATH VARCHAR2(4000);
    ACL_ID RAW(16);
    BEGIN
    -- Look for the ACL currently assigned to '*' and give APEX_030200
    -- the "connect" privilege if APEX_030200 does not have the privilege yet.
    SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
    WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
    -- Before checking the privilege, ensure that the ACL is valid
    -- (for example, does not contain stale references to dropped users).
    -- If it does, the following exception will be raised:
    -- ORA-44416: Invalid ACL: Unresolved principal 'ADMIN'
    -- ORA-06512: at "XDB.DBMS_XDBZ", line ...
    SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
    FROM XDB.XDB$ACL A, PATH_VIEW P
    WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
    EQUALS_PATH(P.RES, ACL_PATH) = 1;
    DBMS_XDBZ.ValidateACL(ACL_ID);
    IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'HR',
    'connect') IS NULL THEN
    DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
    'HR', TRUE, 'connect');
    END IF;
    EXCEPTION
    -- When no ACL has been assigned to '*'.
    WHEN NO_DATA_FOUND THEN
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
    'ACL that lets power users to connect to everywhere',
    'HR', TRUE, 'connect');
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
    END;
    COMMIT;
    ***Note: I have a workspace called HR and a user called HR.
    I run the script and everything works fine but when I try to add the webservice reference I get the same error.
    I don´t know what to do and my time to fixing this problem is ending so please if someone can help me I would really appreciate it.
    THanks in advance

    Hi Luis,
    You will find the script for the relevant releases in the respective installation guides of their releases.
    Here is the script for Oracle APEX 4.1 and its sub-version releases:
    DECLARE
      ACL_PATH  VARCHAR2(4000);
    BEGIN
      -- Look for the ACL currently assigned to '*' and give APEX_040100
      -- the "connect" privilege if APEX_040100 does not have the privilege yet.
      SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
       WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
      IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_040100',
         'connect') IS NULL THEN
          DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
         'APEX_040100', TRUE, 'connect');
      END IF;
    EXCEPTION
      -- When no ACL has been assigned to '*'.
      WHEN NO_DATA_FOUND THEN
      DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
        'ACL that lets power users to connect to everywhere',
        'APEX_040100', TRUE, 'connect');
      DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
    END;
    COMMIT;
    Refer : http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#BEHGBHDF
    Here is the script for Oracle APEX 4.2 and its sub-version releases:
    DECLARE
      ACL_PATH  VARCHAR2(4000);
    BEGIN
      -- Look for the ACL currently assigned to '*' and give APEX_040200
      -- the "connect" privilege if APEX_040200 does not have the privilege yet.
      SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
       WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
      IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_040200',
         'connect') IS NULL THEN
          DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
         'APEX_040200', TRUE, 'connect');
      END IF;
    EXCEPTION
      -- When no ACL has been assigned to '*'.
      WHEN NO_DATA_FOUND THEN
      DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
        'ACL that lets power users to connect to everywhere',
        'APEX_040200', TRUE, 'connect');
      DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
    END;
    COMMIT;Refer: http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/otn_install.htm#BEHGBHDF
    Hope it Helps!
    Regards,
    Kiran

  • Network.service won't boot

    Hi there,
    I just installed arch on my Thinkpad t42p which has a ipw2100 wireless chip. I configured the whole network manually and a corresponding systemd entry. Sometimes the network comes up at boot at sometimes it doesn't. When it doesn't boot I still can start it manually with
    # systemctl start network
    Why could it be that it sometimes boots and sometimes it doesn't?
    Last edited by dead_kenny (2012-11-10 08:35:03)

    Thx for the link skunktrader. Now I fixed the matter by asining a udev rule to the network interfaces as described in the wiki.
    Now I installed arch on an ASUS notebook where the interfaces don't shift during boot but there the network.service also won't boot. I have to start the service manually after boot. The output of
    systemctl /usr/lib/systemd/systemd
    doesn't present the Network Connectivity until I start it manually. Could there be another reason for this? E.g. driver starts to late? How should I look for why systemd cannot start boot the network.service?

  • Apple TV 2 Waiting for network services, unable to sign in to iTunes store

    Received my Apple TV yesterday.
    It is connected to my network (I have tried wired and wireless).
    I can view movie previews and Podcasts.
    I cannot sign in to the iTunes Store (therefore cant rent movies), cannot view Youtube videos (No content available), cannot use Netflix (Waiting for network services when I try).
    I spoke to Apple support, they couldn't help. They say the problem is with my network or my ISP.
    I have a Linksys WRT160N router, on which I have tried disabling the firewall.
    My ISP is Telus, I am on their Fibre Optic network in BC. I wonder if Telus are blocking Apple TV?
    Anyone else experiencing this?
    Message was edited by: gbcecanada
    Message was edited by: gbcecanada

    I received my Apple TV yesterday.
    I am running cable internet with 10Mbps constant.
    So I connected it up and proceeded to issue after issue. I could not log into my Apple account. It was stating that my name or password was incorrect.
    When I would start the unit it would stay at the waiting for network connections screen for several minutes!
    I did all the tricks of turning the apple of and back on, NO FIX.
    I tried to update the software, and I recieved a message that stated I have the most updated software, so....NO FIX
    I did a full restore. The Apple TV downloaded the newest software and rebooted after about 7 minutes, NO FIX
    I logged into my router and opened all ports, added ports 80 and 123, NO FIX
    I also disabled my entire firewall on my router and turned off the WEP security feature...and what would you guess.....NO F I X!!
    So I logged back into my router and reset all my original settings...still NO FIX.
    SO here is the good part...Apparently the system has to connect to time.apple.com and get updated...it's sort of like a verification of the system.
    So after it updated everything worked great! No unable to sign into my account. NO waiting on network connections anymore.
    So the biggest advice I can give, especially after my 3 hours of gradually wasting my time until I almost threw the unit out my bedroom window, is connect it to your WIFI system and let it sit by itself for a few hours and let it connect to the Apple server.
    Hope this helps everyone that, at some point, has shared my pain and frustration.

  • Operation timed out (FSP network services manager)

    Received this error from five different RMAN jobs, all submitted at approx 6am, all failing within a couple of minutes. Resubmit of all five jobs worked fine. Many other jobs submitted at approx the same time worked fine. Time out does not appear to be related to waiting on tape drive resources.
    Any ideas as to cause? If this is a network thing, any way to extend the timeout or cause it to retry?
    Regards,
    Rich McClain
    ORA-19506: failed to create sequential file, name="SBT_TAPE/RMAN_SCMP.707724115.arch.1.7372.1", parms=""
    ORA-27028: skgfqcre: sbtbackup returned error
    ORA-19511: Error received from media manager layer, error text:
    sbt__rpc_cat_query: Query for piece SBT_TAPE/RMAN_SCMP.707724115.arch.1.7372.1 failed.
    (Oracle Secure Backup error: 'operation timed out (FSP network services manager)').
    Snippet from obroxyd.log
    2010/01/08.06:02:57 [2543] failed to connect to admin scheduler - operation timed out (FSP network services manager)
    2010/01/08.06:03:02 [2543] client disconnect from IPC connection 4 (closing)
    2010/01/08.06:03:03 [2543] obproxyd is terminating now
    2010/01/08.06:03:11 [9770] failed to connect to admin scheduler - operation timed out (FSP network services manager)
    2010/01/08.06:03:16 [9770] client disconnect from IPC connection 4 (closing)
    2010/01/08.06:03:16 [9770] obproxyd is terminating now

    Either reconfigure CONNECT_TIMEOUT to be 0, which means wait indefinitely, or reconfigure CONNECT_TIMEOUT to be some higher value. Or, if the timeout is unacceptably long, turn on tracing for further information.
    If you have oracle metalink, then read the following note;
    Note:119706.1 - Troubleshooting Guide TNS-12535 & ORA-12535 Errors

  • Restart Network services

    I hope this isn't a repost but I was wondering if there is a way to restart network services in leopard, similar to this command in linux:
    /etc/init.d/networking restart
    I want to troubleshoot my connection to the router in my home, and my linux install works after giving this command, but leopard is having trouble.
    Thanks
    hah nevermind I found what I need
    Message was edited by: Dak

    Try this
    $ sudo ifconfig en0 down
    $ sudo ifconfig en0 up
    Use en1 for your AirPort card

  • After sql server 2012 installation, I have changed sql server database engine service account from network service user to system user. What is disadvantages of this process?

         After
     sql server 2012 installation, I   attached my production db. Because of some reasons, i
     changed sql engine account from network service user to system user by means of sql server configuration manager.
         Now , there isn’t
     a problem at sql server running system.  But
    I have doubts that
     this can produce problems later. Because  sql server database engine account must have privileges that listed below;
    Log on as a service (SeServiceLogonRight)
    Replace a process-level token (SeAssignPrimaryTokenPrivilege)
    Bypass traverse checking (SeChangeNotifyPrivilege)
    Adjust memory quotas for a process
    (SeIncreaseQuotaPrivilege)
    Permission to start SQL Writer
    Permission to read the Event Log service
    Permission to read the Remote Procedure Call service
     While sql server installation, setup gives these
     privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
    privileges.
    Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
    Log on as a service (SeServiceLogonRight)
         Bypass traverse checking
    (SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
    What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
    Replace a process-level token (
    this can be set from user rights assignments)
    Adjust memory quotas for a process
    (this can be set from user rights assignments)
    Permission to start SQL Writer ( 
    ? - give advice )
    Permission to read the Event Log service (
    ? - give advice )
    Permission to read the Remote Procedure Call service (
    ? - give advice )

     Our server is  windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu  that is in local security policy settings gui.
    And i have seen those permissions below were not granted to system user;
    Bypass traverse checking (SeChangeNotifyPrivilege)
    Adjust memory quotas for a process
    (SeIncreaseQuotaPrivilege)
    So, briefly you say, don't panic ?

  • How to keep connection of network service in win8.1

    Dear sir / madam,
    i would like to ask how to keep connection of network service in win8.1, after i logout / switch user/ sleep.
    thanks

    Hi,
    Did you have any issue on your computer?
    The network is disconnection when you logged off the computer. This is expected behavior.
    The network is stayed connection when you switch the user.
    For sleep mode, check the following setting:
    right click the network device in Device Manager and go up to the top and hit
    Power Management. Then uncheck the box that says "Allow the computer to turn off this device to save power".
    Karen Hu
    TechNet Community Support

  • Log-in message - Network Services Unavailable

    I have been getting the following message upon both my G5 - 10.5.8 and my iMac - 10.6.1 prior to logging in after booting up both machines , both of which are the only two machines upon the same Airport Extreme network.
    *Network Services Unavailable*
    This , for all I know, may well be a perfectly normal message.
    Perhaps it is an indication that I am not running an OS X Server ?
    Whatever, perhaps the problem, as such, could be cosmetically obscured by means of turning on Automatic login.
    Of course, this then leaves the machines open to use by anyone within their vicinity, not my preferred option.

    PART 2:
    Did a complete reinstall and now I'm not even getting an error--login window simply shakes.
    -Running AFP (for user home folders), DHCP, DNS, OD, and Software Update.
    -DNS appears functioning (host, dig, etc all work from my client machine). It is set in the Network Sys prefs.
    -OD lists LDAP server, PW server, and Kerberos are all running, LDAP search base and Kerberos realm are correct. The Kerberize... button does appear in the settings tab (not sure if it should on 10.6...it wasn't there once I Kerberized in 10.5). If I click it and enter the credentials, it doesn't give any confirmation and just comes back up with the credentials box until I hit cancel.
    I have one user in my WGM, besides the admin called "TestStudent". On my client machine, I go to the Login options and just allow specific network users and TestStudent appears in the list, so I'm able to see the directory in some way. It just isn't accepting it as a valid login.
    What other things do I need to check, since it appears to me that everything essential is running properly... I can provide logs if needed.

  • Wi Fi disappeared from my network services. Now, Wi Fi unavailable on my Mac.

    I am using a Mac Pro (early 2009 Model) OS X 10.10.2, 2.93 GHz, 8GB memory.
    About a week ago, my Wi Fi suddenly disappeared from my Network Services. I cannot access any Wi Fi network because the Icon or a Wi Fi link does not show up anywhere. I tried the diagnostic test but that did not work. I re-booted my computer, I re-installed Yosemite and did a software update and my Wi Fi still did not show up in the network services.
    Any help in reconnecting my Wi Fi services will be greatly appreciated.
    Skel.

    Open the Network pane in System Preferences. A list of available network services appears on the left. If Wi-Fi is in the list, select it, then from the popup menu labeled with a gear icon at the bottom of the list, select
              Make Service Active
    Click Apply.
    If Wi-Fi is not in the service list, click the plus-sign button at the bottom of the list, and then select Wi-Fi from the  Interface menu in the sheet that drops down. Click Create, then Apply.
    If there is a closed padlock icon in the lower left corner of the preference pane, click it and enter your administrator password to unlock the settings.
    If the above steps don't solve the problem, continue.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    Right-click or control-click the line and select
             Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with "com.apple.airport.preferences.plist" selected. Move the selected item to the Trash. You may be prompted for your administrator password. Restart the computer and recreate your settings for Wi-Fi in the Network preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Creating a simple network services directory using JNDI/LDAP

    I want to create a simple directory of all the local network services.
    For example:
    o=NetworkServices
      ou=Databases
        cn=FooDB
          attributes >> ipAddress, networkAddress, typeService, typeHost, description
        cn=BarDB
       ou=Authentications
        cn=FooAuth
        cn=BarAuth
       ou=Communities
        cn=FooComm
        cn=BarCommIs there a simple schema (DIT) that can service this need?
    I looked a nis.schema, http://usermap.cvut.cz/ldap/nis.schema, and it appears to be overkill for my needs, plus I do not understand all the attributes it defines.
    Thanks

    hi guys,
    I don't know maybe the way i structure the question is wrong.
    The link to the form is going to be on the intranet, the moment anybody is able to logon to his system with his nt userid , he clicks on the form and this form displays his details. i have a database that contain all the staff details but how do i get his nt userid that i'll use to search the database.
    A dot net programmer has been able to get the userid and if by monday i can't get the userid i'll have to go and learn dot net or leave the company.
    Greatest javites, any hint will be appreciated.
    Best Regards

  • Network service reset - Internet browser stop while working

    Dear All,
    I am using previou version of mac os but currenlty I am using Mac OS X 10.6.8 but after upgrade I have face one problem that every time my network service reset. When I work in Safari or Mozilla (any web broswer) but suddnly internet stop after I refresh the page than again browser is working. this happend many time in a day so it is stop my work and I distrub while working.
    any one has same probelm or any one has a solution so please show me how I can resolved the issue in mac os x 10.6.8
    Thanks
    Pulkit

    Hi and Welcome to the Forums!
    Even though two steps are redundant, I suggest the following steps (in order, waiting for success of each before proceeding to the next):
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then it sadly remains up to your carrier to resolve as they are the ones who deliver your services to you...
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for