Network time out issues

My wife's fairly new Mac Mini keeps on timing out while trying to connect to our Apple Airport. All of or other Apple devices have no issues connecting.

Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

Similar Messages

How to avoid Time out issues in Datapump?

Hi All,
Iam loading one of our schema from stage to test server using datapump expdp and impdp.Its size is around 332GB.
My Oracle server instance is on unix server rwlq52l1 and iam connecting to oracle from my client instance(rwxq04l1).
iam running the expdp and impdp command from Oracle client using the below commands.
expdp pa_venky/********@qdssih30 schemas=EVPO directory=PA_IMPORT_DUMP dumpfile=EVPO_Test.dmp CONTENT=all include=table
impdp pa_venky/********@qdsrih30 schemas=EVPO directory=PA_IMPORT_DUMP dumpfile=EVPO_Test.dmp CONTENT=all include=table table_exists_action=replace
Here export is completed and import is struck at below index building.After some time iam seeing below time out in log files
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX.
Error:-
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 13-JAN-2012 12:34:31
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=170.217.82.86)(PORT=65069))
The above ip address is my unix client system(rwxq04l1) ip.
How to see oracle client system port number?
Please suggest me how to avoid this time out issues.Seems this time out is between oracle server and client.
Thanks,
Venkat Vadlamudi.

Don't run from the client ... run from the server
or
if running from a client use the built-in DBMS_DATAPUMP package's API.
http://www.morganslibrary.org/reference/pkgs/dbms_datapump.html

SOAP ADAPTER TIME OUT ISSUE

We are getting the data from sql server into PI through Soap adapter.
Till day before yesterday everything is running fine .But now it has started giving us the below error.
there were no changes done in the interface.
I am not able to see any error in the runtime workbench ,communication channel monitoring, message monitoring.
This below error is giving in sql server.
Can any PI expert explain or provide me a solution to solve this issue.
Msg 6522, Level 16, State 1, Procedure sp_PI_WS_Backflush_Production_V2, Line 0
A .NET Framework error occurred during execution of user-defined routine or aggregate "sp_PI_WS_Backflush_Production_V2":
System.Net.WebException: The operation has timed out
System.Net.WebException:
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at PI_WS_Backflush_Production_V2.Backflush_OB_Sync_SIService.Backflush_OB_Sync_SI(BackflushRequest_DT BackflushRequest_MT)
   at PI_WS_Backflush_Production_V2.StoredProcedures.Backflush_Production_V2(String PalletNumber, String StockKeepingUnit, String ProductionPlant, String BatchNumber, DateTime ProductionDate, String Quantity, String UnitOfMeasure, String Destination, String& uState, String SAPUser, String SAPPassword)

Time out issue could be due to the long running process in your SQL server. please check the SQL server for its performance and also check the number of http worker threads on the SQL server side where the SOAP adapter makes the call and get the request back.

Time out issues

I have a program which will retrieve the accounting information, the result as like as T-code F.19, but when i execute the program it will caused time out issue, I have not idea how to solve it. Could you help. Here is the source code which cause time out. Thank!
   select * from bsis
      into corresponding FIELDS OF table it_bsis
      where bukrs in so_bukrs and
            budat in so_budat and
            augdt = '00000000' and
            dmbtr ne 0.
    loop at it_bsis.
      select single * from bseg
         where bukrs = it_bsis-bukrs and
               belnr = it_bsis-belnr and
               gjahr = it_bsis-gjahr and
               buzei = it_bsis-buzei and
               ebeln in so_ebeln and
               matnr in so_matnr and
               hkont in so_hkont.
      if sy-subrc = 0.
          MOVE-CORRESPONDING BSEG TO BSIS_TAB.
          BSIS_TAB-WAERS = it_bsis-WAERS.
          BSIS_TAB-BUDAT = it_bsis-BUDAT.
          BSIS_TAB-BLART = it_bsis-BLART.
          IF it_BSIS-SHKZG = 'H'.
            BSIS_TAB-DMBTR = 0 - BSEG-DMBTR.
            BSIS_TAB-DMBE2 = 0 - BSEG-DMBE2.
            BSIS_TAB-DMBE3 = 0 - BSEG-DMBE3.
            BSIS_TAB-WRBTR = 0 - BSEG-WRBTR.
          ENDIF.
          APPEND BSIS_TAB.
      endif.
    endloop.

Avoid selecting BSEG within the it_bsis loop. BSIS will have huge data and when you do data selection for BSEG inside this loop things will only worsen.
My points:
BSIS:
1. Avoid 'INTO CORESSPONDING FIELDS OF" during the bsis table fetch. Instead define your target structure with the required fields and select only those fields from the BSIS table.
2. Make sure that only "Key fields" are used in your filter (where condition) for this BSIS table fetch.
3. I presume your company code in selection (so_bukrs) is a mandatory field. If not suggest for mandatory option.
BSEG:
To avoid selection of BSEG inside the bsis loop do the following.
1. Sort it_bsis by bukrs belnr gjahr buzei.
2. Move the contents of it_bsis into a temporary table of same structure, say it_bsis_tmp.
3. delete adjacent duplicates from it_bsis_tmp comparing bukrs belnr gjahr buzei.
4. Now use the below selection:
   select <fields required from bseg>
     from bseg
     into table it_bseg
     for all entries in it_bsis_tmp
where bukrs = it_bsis_tmp-bukrs and
belnr = it_bsis_tmp-belnr and
gjahr = it_bsis_tmp-gjahr and
buzei = it_bsis_tmp-buzei and
ebeln in so_ebeln and
matnr in so_matnr and
hkont in so_hkont.
if sy-subrc eq 0.
sort it_bseg by bukrs belnr gjahr buzei.
endif.
5. Modify your loop construct as below:
loop at it_bsis.
read table it_bseg into wa_bseg with key bukrs = it_bsis-bukrs
                                                              belnr = it_bsis-belnr
                                                              gjahr = it_bsis-gjahr
                                                              buzei = it_bsis-buzei
                                                              binary search transporting <required fields>.
if sy-subrc eq 0.
   move the required fields from wa_bseg to your BSIS_TAB.
BSIS_TAB-WAERS = it_bsis-WAERS.
BSIS_TAB-BUDAT = it_bsis-BUDAT.
BSIS_TAB-BLART = it_bsis-BLART.
IF it_BSIS-SHKZG = 'H'.
BSIS_TAB-DMBTR = wa_BSEG-DMBTR * -1.
BSIS_TAB-DMBE2 = wa_BSEG-DMBE2 * -1.
BSIS_TAB-DMBE3 = wa_BSEG-DMBE3 * -1.
BSIS_TAB-WRBTR = wa_BSEG-WRBTR * -1.
ENDIF.
APPEND BSIS_TAB.
endif.
endloop.

Time out issues in globe transaction

Hi experts,
I have one issue that is ,...A variant ran several times in the past for monthly requirements for CAT updates is now timing out no matter how short of length of time report is set to run.
Users are using the variants like CAT_HCN_SLP, CAT_IF, and CAT_HCN and populating the field "Date of Usage Decision" with a range from 15 days to as short as 1 day - and continuously having time out issues.
This report is necessary for CAT downloads for regulatory complaince and needs to be utilized by the end of the month if not sooner.
Thanks in Advance
Hari

Hi John,
I dont know what transaction are you talking about...
But if it is TIME_OUT.... you need to check for any OSS Notes available for this problem.
If not send a product error message to SAP.
There cannot be anyother solution,,,, if it is time_out.
go ahead.

Please Help --Export to excel time out issue

500 Connection timed out
Hi Friends,
We have a query which runs about 3 minutes on web and brings bach 54000 rows , but when the user tries to export to excel It give timeout error as below.
Connection timed out (-5)
Error: -5
Version: 6020
Component: ICM
Module: icxxthr_mt.c
Line: 2467
Server: tepas0_abc_00
Detail: Connection to partner timed out
Please help me out.
Thanks a lot!

Hi,
Check the info here:
https://forums.sdn.sap.com/click.jspa?searchID=5203764&messageID=959490
There are also a lot of other threads on time out issue...
Hope this helps...

I have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop

i have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop and i want to update my iphone4 to iOS 5.

Things in this thread might be helpful too.
https://discussions.apple.com/thread/3382814?start=0&tstart=0

Windows Handheld application Time out issues.

How to Handle Windows Handheld Application idle time out issues.

For your reference I found something interesting stuff:
http://www.hjgode.de/wp/2011/07/04/wm-6-5-remote-desktop-client-disconnects-after-10-minutes/comment-page-1/
and a blog:http://blogs.msdn.com/b/raffael/archive/2009/09/11/remote-desktop-mobile-rdp-client-disconnects-after-10-minutes-of-inactivity.aspx
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

8g touch updated 4.2.1, problems synching apps and music. gives multiple errors; device times out, internal device errors, network times out, duplicate file, too many files open. itunes diagnostics ok. what to do?

have an 8g ipod touch which has had problems trying to play games and downloading update 4.2.1. went to the apple store who kindly downloaded the software update but now can't synch and generates multiple error messages; device times out, internal device error, network times out, duplicate file and too many files open etc etc. have latest i tunes download and diagnostic test ok. what can i do?

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

Dear Apple, Have you fixed the 'Time out' issue with airport? It now happens to me 2-3 times a day for the past 6 months. Answers please.

Dear Apple, Have you fixed the 'Time out' issue with airport? It now happens to me 2-3 times a day for the past 6 months. Answers please.

We're not Apple - these boards are user-to-user.
Your profile says 10.7.3 - try applying the 10.7.5 combo update.

HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable. I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99% installed on the progress bar and sits there until it times out. I suspect one of the follow but am open to other ideas from those more knowledgeable:
1. Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
2. Could my WPA WPA2 PSK AES encrytion be messing it up? Are the modern firmware and updates designed to accept these ? I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase. What to do if so?
3. Could Church Lady be correct and that it is Satan preventing the installation? If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

Hi @Marvalina1968,
Welcome to the HP Forums!
I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
First to answer your questions:
It is possible the printer could be locked to an old configuration and needs to be reset.
I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
Your Norton antivirus, could possible be causing the installation to fail.
Please take a look through the following guides:
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Printer Does Not Maintain Wireless Connection.
If the guides do not resolve the issue, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Re-install the software. HP LaserJet Full Feature Software and Driver.
Hope this solves your problem, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Time-out issue Always on SQL 2012 Cluster

Currently I'm working on a large deployment of a SharePoint 2013 environment (stretched farm over 2 DC's). We are using a SQL 2012 alwayson multisubnet cluster (each DC has 1 SQL node). During the installation of SharePoint we encountered several connection
time-out errors from the SQL environment. (Exception calling "Open" with "0" argument(s): "Connection Timeout Expired. The timeout period elapsed during the post-login
phase. The connection could have timed out while waiting for server to complete the login process and respond;)
Steps we follow for SharePoint installation are:
Steps to configure SharePoint 2013 on an AlwaysOn Availability group:
1>Create SharePoint databases (with the PowerShell script)
Configure a SQL alias for a consistent SQL instance name.
Create farm on SQL instance/replica 1 (one of the SQL nodes), creating all databases needed (service-apps & web-apps). -->
we are connected directly to 1 SQL node and not connecting to the cluster. Installation server is in same DC as the SQL node.
Stop SharePoint so databases remain static during migration to an AlwaysOn cluster.
2>Move database to AlwaysOn high-availability group.
Restore all the DBs onto SQL replica 2 (with NORECOVERY).
Create AlwaysOn availability group, or use existing
Join the replica 2 databases to availability group.
Create listener.
3>Migrate SharePoint onto AlwaysOn on cluster
Make all SharePoint DB MultiSubnetFailover aware with PowerShell Cmdlet
Reconfigure SQL alias for new listener
àat this point the SharePoint farm is connecting to the SQL cluster (listener of AlwaysOn availability group of the SQL Instance), but we never reached this point so far.
Restart SharePoint services with updated alias.
Event errors and SQL log errors that I found:
Date,Source,Severity,Message,Category,Event,User,Computer
09/18/2014 07:34:59,Microsoft-Windows-FailoverClustering,Error,Cluster network name resource 'SPAG_CU8000001105' failed registration of one or more associated DNS name(s) for the following reason:<nl/>DNS bad key.<nl/>.<nl/><nl/>Ensure
that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.,(19),1196,NT AUTHORITY\SYSTEM,CU8000000015
09/18/2014 07:34:59,MSSQL$SPAG,Information,The Service Broker endpoint is in disabled or stopped state.,(2),9666,,CU8000000015
09/18/2014 07:34:52,Microsoft-Windows-FailoverClustering,Error,Cluster network name resource 'SPWMAG_CU8000002105' failed registration of one or more associated DNS name(s) for the following reason:<nl/>DNS bad key.<nl/>.<nl/><nl/>Ensure
that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.,(19),1196,NT AUTHORITY\SYSTEM,CU8000000015
09/18/2014 07:34:52,MSSQL$SPWMAG,Information,The Service Broker endpoint is in disabled or stopped state.,(2),9666,,CU8000000015
09/18/2014 07:34:47,Service Control Manager,Information,The WMI Performance Adapter service entered the running state.,(0),7036,,CU8000000015
09/18/2014 07:32:41,Microsoft-Windows-FailoverClustering,Error,Cluster network name resource 'SPSDAG_CU8000003105' failed registration of one or more associated DNS name(s) for the following reason:<nl/>DNS bad key.<nl/>.<nl/><nl/>Ensure
that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.,(19),1196,NT AUTHORITY\SYSTEM,CU8000000015
09/18/2014 07:32:41,MSSQL$SPSDAG,Information,The Service Broker endpoint is in disabled or stopped state.,(2),9666,,CU8000000015
09/18/2014 07:31:09,PowerShell,Information,Engine state is changed from Available to Stopped. <nl/><nl/>Details: <nl/> NewEngineState=Stopped<nl/> PreviousEngineState=Available<nl/><nl/> SequenceNumber=61464<nl/><nl/> HostName=OpsMgr
PowerShell Host<nl/> HostVersion=7.0.5000.0<nl/> HostId=32012185-8d9a-41c2-be56-91929c02f1e8<nl/> EngineVersion=4.0<nl/> RunspaceId=af176e01-185d-4574-ab9b-0fd745178d29<nl/> PipelineId=<nl/> CommandName=<nl/> CommandType=<nl/> ScriptName=<nl/> CommandPath=<nl/> CommandLine=,(4),403,,CU8000000015
We are not allow to update/write in the DNS for the multisubnet cluster IP registration, so I think that explains the "failed registration
" error. But can this explains our time-out errors during the SharePoint installation? For the installation we are connection directly to 1 SQL node and not to the SQL
cluster.
Any help is appreciated!
Ronald Bruinsma - Independent SharePoint Consultant - iDocs.info - The Netherlands -- Please don't forget to propose this post as an answer or mark it as helpful if it did help you. Thanks.

Don't just change the connection timeout on your SharePoint farm. This will just hide the real issue. From your error message, it seems that the DNS record for the Availability Group listener name is not being written. Talk to your AD administrators to validate
if dynamic DNS registration is configured for the DNS servers. If it is, AD will create the DNS entry of the virtual computer object for the Availability Group listener name. The WSFC should also have Create Computer Objects permission in the AD Organizational
Unit where your Availability Group listener name will be created.
On a side note, make sure that you configure a separate SharePoint 2013 farm for your DR environment that will use the content databases joined in the Availability Group. For a stretched farm deployments, latency should be less than 1ms one way as
per this article. And while you can add your admin content and config databases on the Availability Group, asynchronous commit is
not supported.
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Network times out on Power Mac

My G4 Power Mac (running 10.4) can load many web pages ok, but if there is a large file or a sustained download, such as streaming video, it will stop downloading and time out. I can open a new Safari page and start over, no problem.
Same thing for file transfers between machines on my network. It will stop transferring.
Software update sometimes finishes evaluating my need for updates, but if I try to update it usually fails before files are downloaded.
This machine is currently running in a place where another machine was, using the same network connection, cable etc. The other machine had no problem, while this machine exhibits the problem wherever I put it.
Is it likely a hardware issue (I've done a clean install of the OS)? Is there an inexpensive network card that is supported by 10.4 that I can put on this machine to find out?

You can use Network Utility to look at the error counts for your Ethernet interface. Anything over a handful of errors at startup usually indicates a problem.
If you have a Router with multiple ports, try a different port. My experience is that the ports don't fail outright, they just get more and more errors.
There is an Apple Ethernet 10/100 PCI card that was made for older Macs like the 8600 and beige G3. They are available from time to time on the used market. If you get another brand, be sure to get the Mac drivers with it -- many of the makers are out of business and the drivers are hard to find.

Connection to Playstation Network Times Out

I have Westell G90-610015-20 DSL Modem. I have ASUS Wireless Router RT-N12 connected to it.
My PS3 is able to connect (wirelessly) to the wireless network. I can update the firmware, and it is able to download any update for any game. However everytime I tried to login into Playstation Network, it would time out. When I do Internet Connection Test in PS3, the results for "Obtain IP Address" and "Internet Connection" are Succeeded, but for "Playstation Network" failed.
I have read some postings regarding the same issue, but found no solution.
Please advice.
Thank you in advance.
Solved!
Go to Solution.

Ok.
I point to
http://www.dslreports.com/faq/13600
If you have any questions, please ask.
After you get your modem combo into bridge mode and your ASUS RT-N12 is handling the public IP, please report back that fact and I will tell you what to do next.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Session time out issue in Firefox 3.0 .

I am using intranet application developed in .net framework 3.5. Users are authenticated via Windows Authentication in application.
Issues in following steps;
1) I am browsing application in one Firefox 3.0 browser. Simultaneously I am browsing some different site say google.co.uk in different instance of Firefox. Please note I am browsing google.co.uk in other Firefox browser not in different tab of same browser instance in which I am browsing my intranet application.
2) Session time out in intranet application .
3) I am starting new Firefox instance and try to open intranet site. I am again getting Session time out message.
4) I closed all of Firefox browsers (2 instances)
5) Start again a new browser and try to open intranet application.
6) It is successfully opend.
Now the pain is why I need to close all other Firefox browsers in case of session time out in one browser .Similar issue I was getting in IE 8 but they have feature like Open site with a new session .
It would be nice if you can help in getting rid of this issue
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; WOW64; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; InfoPath.2; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)

Hi Rohit,
If you want to increase Session time : increase time in web.xml in min
<session-config>
<session-timeout>30</session-timeout>
</session-config>
and after session time out if you want to re-login to webshop then
do following settings in XCM.
url : http://<host>:<port>/b2b/admin/xcm/init.do
goto -> General Application settings -> b2b -> b2bconfig.
For reloginurl.core: value : ../init.do
note: after session expire if your application is redirecting to https:<port>:<host>/....
Then
set SSLEnabled: as false
Restart your application
Hope this works.
Regards,
Devender
Edited by: devender on Jul 12, 2010 5:01 PM

Network time out issues

Similar Messages

Maybe you are looking for