Networking: FRUSTRATING.... PLEASE HELP

FileOutputStream inFile = new FileOutputStream(FileName);
BufferedInputStream in2 = new BufferedInputStream(socket.getInputStream());
while( (len = in2.read(b,0,1024)) != -1 )
bytcount=bytcount+len;
inFile.write(b,0,len);
in2.close();
inFile.close();
sometimes
while( (len = in2.read(b,0,1024)) != -1 )
the while loop is not accessed even though the server sends the file with data.
do you have any idea???
please help

thnx warnerja that really helpsIt wasn't directed at you. That's just an attempt to clean up the duplicate post that you created, so that people don't waste their time answering it here if others are answering the duplicate one.
Geez dude.

Similar Messages

  • I can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi

    i can't download the apple ios 5 for the ipad. after downloading around 10 % an error no. 3259 occurs. it's a network error. please help . it's urgent. i am having apple ipad 2 3G wifi.

    i switched off all the security settings and all the firewalls.
    i m unable to install any of the app on the ipad
    so i saw the apple support and it said to update the older version of my ipad.
    and niether am i able to download the update nor am i able to download any app and install it in my ipad2
    i also tried to download an .ipsw file (ios5 update) from torrentz bt i am also unable to install from that as itunes rjects that file and gives an error. and also tries to delete that file. plz anyone help urgently.

  • Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..

    Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..
    [email protected]

    Both parties must be connected to wifi to use FaceTime (and you must have FaceTime turned on in Settings>Facetime).  If you're phone shows 3G at the top when it's on, you're not connect to wifi; you'll have to solve that problem first.

  • I just transfer the new software to my iphone 4 and now it has no network. Please help me

    I just transfer the new software to my iphone 4 and now it has no network. Please help me

    I don't know what really happened and why and how it 'came back to normal again' but thank you so much you guys. I'm new at this, as you may seen, and i'm portuguese, and my english is terrible. you reallyyyyy helped me, i has just almost having an heart attack. This was my b-day gift and here in portugal apple stuff are very expensive (at least for me)

  • Photoshop CC program error when opening or placing files. VERY FRUSTRATING PLEASE HELP.

    I'm an advertising graduate student that relies heavily on Adobe programs for my multiple simultaneous projects throughout the school year, specifically Photoshop, Illustrator, InDesign, Muse, Edge Animate and Premiere Pro.
    I'm using a MacBook Pro running OS X Yosemite.
    I have been experiencing an incredibly frustrating issue with Photoshop and Muse, both CC 2014. I'll speak about Photoshop in this thread since, well, this is a Photoshop forum. This has been happening for almost a year now. I figured Adobe would've fixed this problem by now, especially given the myriad of crash reports I send.
    While working in Photoshop, sometimes when I go to place a file I get an error message that says "Could not complete your request because of a program error." It used to be that this error was fatal and I would have no other choice but to force quit out of Photoshop and restart it. We all know how incredibly time-consuming it is for Photoshop to open (especially 10-15 times in one sitting), and being in grad school, time is not something I have a lot of when I have deadlines and projects due.
    This error is still happening and for the same reasons; however, now I can still continue to work on my file, as long as I don't need to open a document or place an image...which doesn't help very much because I'm doing a lot of mockups and composites and need those functionalities. It happens probably 90% of the time when I try to place or open a document.
    For the record, it's a similar issue that's causing Muse to crash as well. When I try to add an image file, it causes the entire program to crash "unexpectedly," as Muse so eloquently puts it.
    Until recently I had kept CS6 on my hard drive and would dig it out to use in place of CC when PSCC would crash; however, someone told me that having both versions was likely the cause for the crashes. After much hesitation, I finally uninstalled all of CS6 from my hard drive the other day (the right way, not into the trash can, since someone is inevitably going to ask that question) and I'm still having this problem, and now I don't have my CS6 version to fall back on and now I'm in a really bad spot.
    I apologize for all the rambling, but I'm really very, very frustrated with this error, and I had to do something while waiting for Photoshop to restart. Someone please help.

    MacOS 10.10? Yeah, Apple is working on that bug.  They already fixed the crash in the open/save dialogs, but have a few more problems to address with the open/save dialogs.

  • Power Spike Threw My Network? PLEASE HELP!!!

    Tuesday night we had a power spike that seems to have killed my network. I wanted to know has this happened tpo anyone else and if so how did you fix it. My problem is this,my ISP is Mediacom, I have a 10 MB connection, a Linksys WRT54GS V7 firmware 7.50.2 and I cannot get anything to connect to my wireless network. My pc that is wired into my router is fine. Getting good connection. I also have a Playstation 3 that connects wireless, Xbox 360 that connects wireless through a Linksys WGA54G, a pc that connects trough a Belkin wireless desktop card, and a Nintendo Wii that also connects wireless. Now Tuesday during the day everything was connected and fine. Wednesday I woke up to find that everything on my network had reset themselves and would no longer connect to the existing network. So I tried to reset everything on a new network. I couldn't get anything to connect. I replaced my router with the same model number and upgraded the firmware to v7.50.2. I called Mediacom and they reset my internet connection saying that my "modem was getting too many signals form my electronics and not my router"(?). Everything came up fine only to go down after about 5 mins (right after I tried to connect my PS3). Afterwards I called Mediacom back had them reset my connection and only tried my pc. It would connect but it would say little or no connectivity. Called Linksys support and a nice lady named Marie told me to change my from TKIP to AES change my channel to 11 and so forth and so on. It worked for about 5 mins and went down again. I called them back and again they changed my channel and lower my MTU. This time it would work but it was incredibly slow. Now I have no idea what to do and am quickly coming to my wit's end. Please help.
    Message Edited by pugnacious_apbt on 09-13-2007 02:25 PM

    I dunno dude. This is killing me. Mediacom won't help me because they don't support in home networks. I have never had a problem before now. I had the original router for almost a year. Power spikes are quite common throughout this area and it was always fine. Now all of a sudden I have this. I dunno what to do. I need all the help that I can get. I have never had a problem with any of my Linksys products. Just run the CD and plug in everything and I'm online. Simple. Lately I have seen more of my admin screen than I had ever hoped to.

  • Usbs not working very frustrating please help

    My usbs have all stopped working for no reason just after i did my last windows update even with a roll back it still says this error in the picture very frustrating i updated bios on my motherboard and downloaded usb drives but still did not fix the issue
    please help it says unknown usb device(device descriptor failed)whn i plug hard drives in the usb has power but it wont show up on my pc also happens with my keyboard and mouse even after driver re installs please help.

    Hi,
    For this issue,please let us know the error code.
    Meanwhile, I suggest we disable and re-enable the USB controller to check the result.
    This lets the controllers recover the USB port from its unresponsive condition.
    To disable and re-enable the USB controllers, follow these steps:
    1.Press Win+X，and select Device Manager.
    2.Expand Universal Serial Bus controllers.
    Note You might have to scroll down the list to find this item.
    3.Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
    4.Repeat step 3 for each USB controller that is listed under Universal Serial Bus controllers.
    5.Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
    6.Check the USB device to see whether it is working.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • I cant update my Mac OS X 10.5.4.It 'configures' forever' and I often end switching off the computer in frustration.please help!

    Hello all,
    for several months I have found it impossible to update my Mac OS X 10.5.4.
    When I click on 'update',it just carries on 'configuring' forever.I often switch the computer off in frustration.
    Please help.

    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    Safari 5.0.6 for Leopard can be downloaded from here:
    http://support.apple.com/kb/DL1422

  • Zyxel AG 225H & Mac Networking Challenge PLEASE HELP

    Hello, trying to help a friend join network already established at her house. Office is about 200 yards from Linksys router, Zyxel AG 225H "reads" network from office location, so far so good. Following instructions, downloaded Mac drivers fm Zyxel site, loaded Zyxel unit into USB port but have been unable to proceed beyond the Zyxel scanning for networks to join (which it seems to do endlessly). AG 225H is supposed to act as adaptor enabling iMac to join wireless network. But it's not clear what the next steps are. Instructions with Zyxel are poor, their tech support not available again until Monday..
    anyone have experience and can please help with suggestions? It's not clear if I need to do active configurations on the iMac in order to activate network.
    My friend only has 9Gb (!!) of free hard drive space on iMac which I think could not be helping?
    thank you
    iMac   Mac OS X (10.3.9)   Zyxel AG225H, 768 Mb SDRAM, 800 Mhz PowerPC G4, 60 Gb Hard Drive

    I hate to tell you 200 yards is a out of range for this connection the only way I am aware you can do this is to either run a cable or do the below to extend the range.
    http://docs.info.apple.com/article.html?artnum=107454
    This the reason it scans continuous and can't connect, it's out of range.
    Don

  • I think someone HACKED into my Network..please help!

    Hi,
    I have a Powerbook, 4 years old,never had any trouble with network changes or losing control with settings.
    Recently I was logged into Messenger and was disconnected with the message *+"you were disconnected because you were logged in at another device or terminal"+*. Which was very odd. I logged out and logged in again and it came up again shortly thereafter. Then I went into my System Preferences/Network and when it popped up a message said "Your network settings have been changed by another application". This definitely didn't smell right.
    I'm the only one who controls the network settings,it's a home/internet network. I use a Mac Airport Base Station.
    Please help with any insight or suggestions on how to change my settings back or what to do. Thank you.

    BGreg wrote:
    Yes, a closed network doesn't broadcast the name (SSID) of the network.
    If you want to be absolutely sure somebody can't get into your network, enable the mac address control, which will only allow the defined systems to use your network.
    Actually, the only setting that really matters is WPA.
    The WPA layer is the most hack-proof security method, so if a hacker is good enough to get through WPA, no other layers will stop them. The hidden SSID can easily be sniffed out of the air and then accessed, and the MAC address filter can be evaded by, again, simply sniffing the transmissions and then cloning the MAC address of the client machine that's obviously allowed in, so that the router thinks the hacker's machine is your machine.
    With WPA the one thing you have to do is use a password that isn't in any dictionary, since the only attack WPA is vulnerable to is a dictionary attack. If you can avoid that through the intelligent choice of a password, WPA is pretty solid, especially WPA2.

  • Nokia Lumia 520, Several frustrations please help.

    Just brought a Nokia Lumia 520, seemed like a good choice some cpu/gpu/ram as the 720, bigger screen than the 620, would have got the 620 if it was a 4" screen. 
    I use a smartphone for these reasons.
    Text: Nokia 520/Windows Phone does this well.
    Calling: Nokia 520/Windows Phone does this well.
    Email: Nokia 520/Windows Phone does this well.
    Reading articles/browsing the web: Frustrating.
    Internet Explorer doesn't display a large number of pages correctly.
    When a website has a menu (links) to swipe through instead of swiping to the next one it both swipes and opens the link, every time. m.IMDB.com for example.
    What can I do about this?
    Music: Frustrating. 
    The volume button on the 520 seems very cheap, it's just a loose bit of plastic on the case it's self, is this normal?
    I'm currently a premium member of Spotify, the Windows Phone Spotify app forgets when settings are changed, when I try to stream in high quality it always goes back to normal (which sounds pretty bad). There's also no "extreme" quality option.
    Xbox Music Pass, this just seems like a really poorly made app, I've signed up for the premium streaming (as a Spotify alternative). But to get to it I need to click on store\then music, type in the artist I want, and once the music starts, i need to constantly click the "..." button the "more in store" button to change songs within the album, the list it's self doesn't even show you which song is playing, you need press the "<-" button to see the title. And on top of all that instead of the nice clean background there's a picture of the artist, but the picture is stretched and blurred and looks horrible, very off putting.
    Also is the a way of seeing the "status bar" type info without pressing the volume button?
    Please help me, I'm tempted to go back to Android but really don't want too.

    If you hold the back button down without letting it go then all screens that have been left open can be scrolled across screen 1 tap on desired screen opens it as start screen. Same with internet explorer hit the .......... At bottom of screen select tabs and it puts every page visited as a small tile with a. X in corner they can be closed in seconds in the one screen without ever hitting the back button. Hope this is helpful.

  • I am having some serious wireless networking issues - please help!

    I had a working wireless network setup in my home until the laptop was dropped and the hard drive needed to be replaced.  The network consists of the laptop, desktop and wireless printer.  I am now unable to get my wireless network up and running again.  Is there anybody that can walk me through this.  Right now I have the laptop hardwired to the cable modem so I am able to use the internet.
    Please help!!!!!! 

    1. Go to Wireless. Set using Manual Config.
        Mode = Mixed
        SSID = Create your own SSID
        Channel = 9
        Broadcast = Enabled
    2.Go to Wireless Security
        Security = WPA Personal
        Passphrase = Type your 8 character long password
    3. Go to Security. Disable Block/Filter WAN Request
    4. Check if you are still online wired.
    5. Connect your laptop to the wireless network
    Regards,
    Lord Maxthor

  • Im trying to do itunes match i get to the third part which it says gathering artwork and songs and about half way through it stops and says ther is a problem sign out and sign in again which i do and still it happens getting really frustrated please help

    Hi im having problems loading itunes match everytime it gets to the third installment it stops and tells me there is a problem sign out and sign in again which i do and still the same problem. I did get an email saying notice about your apple id and to verify now but when i go to page its saying 404 not found im now ready to ditch apple products and go else where every where i turn theres a problem this is my final calling please help.

    Hi im having problems loading itunes match everytime it gets to the third installment it stops and tells me there is a problem sign out and sign in again which i do and still the same problem. I did get an email saying notice about your apple id and to verify now but when i go to page its saying 404 not found im now ready to ditch apple products and go else where every where i turn theres a problem this is my final calling please help.

  • How do i put movies on my hard drive into itunes? so frustrated please help

    I just got my 80G iPod and i cant seem to figure it out. Please help.

    Well my buddy has his own movies on his iPod that he did not buy from the iTunes Store(i cannot call to ask him how), and the guy at the Apple store told me that yes it is possible to put your own movies onto your iTunes by converting the movie to the right format- and he said that you can purchase Quicktime Pro and it will make it the right format- but i was wondering if there was a different way.

  • Wont let me into itunes store due to network settings, please help!

    I previously had no problems with the store and have regularly purchased from it. Since going wireless I can no longer get in and now when I try through modem it doesn't work either.
    I have flushed the DNS settings as advised, but, no joy. If anyone has any ideas please help me.

    Try these;
    1 - http://docs.info.apple.com/article.html?artnum=302182
    2 - http://docs.info.apple.com/article.html?artnum=304082
    3 - http://docs.info.apple.com/article.html?artnum=93434
    4 - Check the firewall on your broadband router/modem.

  • Whenever I connect my iphone 4 to my lap top i get a message saying digital still camera and the my laptop crashes, it is really frustrating, please help

    Whenever I connect my iphone 4 to my lap top i get a message saying digital still camera and the my laptop crashes, it is really frustrating, please help

    Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
    You may have some problems because Apple has not certified that everything works with Windows 8 yet.

Maybe you are looking for