Networking issue between 2 machines using 1 network connection

i have 2 machines - one is a mac pro running 10.5 the other a much older g4 running 10.4
i have one network connection into my room which is connected into 1 of the 2 network ports on the back of the mac pro.
this connects to the internet fine
from the other network port on the mac pro i run a cable to the g4.
the 2 machines see each other on the network and connect with each other fine . . however the g4 is unable to connect to the internet.... what have i done wrong?
what are the settings i need to do on either machine to allow both to connect to internet via the one connection?

Did you turn on "Internet Sharing" in the "Sharing" system preference on the Mac Pro?

Similar Messages

Message or notification between 2 machines using java

Hello ,
i wrote i java code that running in windows using SSH protocol to connect to remote unix machine and execute process in the remote machine ,if i have deamon that monitor this process in the remote machine how can i send notification from the remote machine to the local,which protocol can i use for messges ,is JMS can work in this case
best regards
Johny.

If you are using SSH I suggest sending notifications over the SSH connection. With SSH connections you can send/receive via the input and output of the program you are executing, in the same way you would if you were running a process locally.

Can you setup Advanced queueing between 2 databases using SQL*net connection

Hi experts,
Is it possible to setup AD between 2 databases without using DBlink? I know we can use Java program to do that. Unfortunately, I have no experience in Java.
Our version databases is 10g
Thanks in advance
Hieu

Following are the different options available.
Interfaces to Advanced Queuing
You can access Advanced Queuing functionality through the following interfaces:
PL/SQL using DBMS_AQ, DBMS_AQADM,andDBMS_AQELM. Refer to the Oracle9i Supplied PL/SQL Packages and Types Reference.
Visual Basic using Oracle Objects for OLE. Refer to the Online Help for Oracle Objects for OLE.
Java using the oracle.AQ Java package. Refer to the Oracle9i Supplied Java Packages Reference.
Java Message Service (JMS) using the oracle.jms Java package. Refer to the Oracle9i Supplied Java Packages Reference.
Internet access using HTTP, HTTPS, and SMTP
For java references you can refer to below URL
http://docs.oracle.com/cd/B10500_01/appdev.920/a96609/arj_aq.htm#1005399
I believe no one will provide you fully written code here. You can get help from this forum,

Weird issue when trying to use two computers on the same network.

Hi all...i just just moved house and i'm using a different connection with my time capsule.
basically i've just plugged the modem into the ethernet port on the timecapsule as usual, and now for some reason me and my partner cannot use the computers to access the net at the same time
my access will halt as soon as he starts, and the only way to gain access again is to renew the DHCP lease, which subsequently boots him off....
anyone know how to fix this?

it's a wireless modem. not like a usb stick with a 3g connection. it's called unwired here in australia....its crap, but im using it for the next few days until my cable connection is installed at the new house.
it's pretty much the same as a regular modem and has an ethernet port on it which you can either use to connect directly into your system, or plug into a router or wifi (or in my case, time capsule which i'm using as the wireless base station)
i've just done the usual thing of plugging the ethernet cable from the modem into my time capsule, and it seems to work fine as long as it's only one user on the network. but as soon as someone else jumps in, their system gets access and mine stops. the only way to get mine working again is to renew the DHCP lease in networking preferences, but that ends up booting the other person off.
i havent changed any settings at all and we never had this issue at the old house...so i'm not sure if its some configuration with the time capsule, or if it's something weird about the dodgy modem i'm using...

Private network issue - Windows 7 machine not restricting Windows 8 on the network

I have 2 machines at my home, a windows 7 home premium and a new machine with windows 8.1. The windows 8 machine can get to anything, regardless of user account, regardless of directory, including
hidden files and folders, on my windows 7 machines without requiring any kind of authentication. This is not the case for a 2nd windows 7 machine that I can connect to the same network - it can't see the first windows 7 machine on the network at all.
I've validated that the advanced sharing options on my windows 7 machine are set to the following (in all the network profiles):
Network discovery is turned off
file and printer sharing is turned off
public folder sharing is turned off
media streaming is blocked
file sharing encryption is enabled for 40- and 56-bit encryption (to allow a Vista laptop to share files)
password protected sharing is turned on
I'm not using Homegroup, and have ensured that even the names of each not-used Homegroup on each machine is different, and the passwords for each homegroup is different just in case.
I can go to the File Explorer on the windows 8 machine, and in the network section, the windows 7 machine is visible (why since it is not discoverable?). If I go to Windows Explorer on the windows 7 machine, I get an error message that network
discovery must be enabled for me to view other devices on the network....
From File Explorer on my windows 8 machine, I can select the C: drive on the windows 7 machine, and see any folder, any file without any restriction. There is no prompt for userid / password, and the userid I'm using on the windows 8 machine
does not exist on the windows 7 machine. I can READ anything, I can copy any file from the windows 7 machine to the windows 8 machine, but I do get an error message that I need permission from SYSTEM to save some changes directly to the windows 7 machine
(for example, renaming a file in the windows\winSxS directory.
I really want to have the windows 7 machine discoverable so I can get to the windows 8 machine too. I would like to force userid/password authentication on each machine (both have multiple user accounts) when accessed from a network. But
my primary problem is the lack of blocking any access from the windows 8 machine to the windows 7 machine.... Any help appreciated.

Hi,
"I'm not using Homegroup, and have ensured that even the names of each not-used Homegroup on each machine is different, and the passwords for each homegroup is different just in case."
I am confused about this sentence. Did you use HomeGroup on earth?
In addition, I suspect the Windows 7 and Windows 8 computer have the same local administrator user account and password. Both UNC access and Windows log on use the SLA authentication. The LSA handles user logon and authentication on the local computer,
and if the authentication package processing the logon request supports pass-through authentication, the LSA can also log users on to other computers on the network. So, using the same administrator account with same password will bypass the authentication
in UNC.
Please change the local administrator user password which you used to access the Windows 7 for Windows 8 machine for test.
Karen Hu
TechNet Community Support

We have recently started using ID CC 2014 and recently have been haveing Crashing issues stating the network connection was lost. Anyone else having this issue?

We have recently started using ID CC 2014 and recently have been having Crashing issues stating the network connection was lost. Anyone else having this issue?

I will try that.
This is a copy of the error we are getting

Hi I'm having issue to sign in using iPod touch cause it keep showing check network connection as I use wifi.. Can please hel me . Thanks

Hi I'm having issue to sign in using iPod touch cause it keep showing check network connection as I use wifi.. Can please hel me . Thanks

Sign in where?
Maybe:
FaceTime, Game Center, Messages: Troubleshooting sign in issues

Network issue between Macbook Pro and Windows

I have a Macbook Pro 2012 model running 10.8.5. Also have a Win7 PC.
When both are connected to the home router via wire (or the Windows on wireless), everything is fine from network connectivity point of view. However if I move the Mac to Wireless (either 2.4 or 5GHz), Mac can't ping/reach out the Win7 computer and vice versa. Win7 can be wired or wireless, does not matter.
I checked not only ping, but http, https, vnc protocols. None of them works when Mac is on WiFi.
I also have printer, smartphones/tablets connected to the local lan and all are accessible either from the Mac or the Windows (including the home router and internet behind it).
First I thought it should be a Windows problem, so tried to shut the firewall down on that side, but did not behaved differently. Firewall is down on the Mac all the time. And firewall was somehow ticked out with the wired test when the Mac received pings from the Windows computer.
The other reason why I thought about Windows, when I boot it up, I can ping it for a couple of minutes. Then ping breaks.
Due to the 100% success of the cable test, now I started wondering if the Mac has some misconfiguration. Any suggestion I should check?

One more comment. Wired connection seem to be stable neither. I have ping running to the Windows computer and after a couple of minutes, it gets broken.
However if I have both WiFi and cable connection to the home router and disconnect from cable (after ping is broken), I get the network to the Windows comptuer back. Nothing serious on the network change, I just get 192.168.1.x instead of 192.168.1.y as IP).
During this network switch I do nothing with the Windows computer.
This is not valid if I want to connect to the Windows computer via Microsoft sharing (smb://192.168.1.x), then it immediately breaks the connection. Can't get it back until Windows is restarted.
Getting lost...

I bought a retina 15", but it will not make a network connection to my 27" iMac 2 feet away. The wifi is working fine on both units, but prefer to use ethernet cable on 27". The question is, why can I not ewstablish a network connection between the 2? Air

my desktop iMac 27". The odd this is, the AirDrop works fine, so they can obviously see each other over wifi.
Sometimes, when I launch network on the 27, I will briefly see my retina notebook attempting to connect, but after a few seconds, the notebook icon disappears until I relaunch. Then we can go thru the same exercise, ad nauseum.
Any suggestions?

Thanks, Linc, but that almost helped:
Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
Any ideas about the dropped network?

Can a Hyper-V machine be made slower and/or emulate a slow network connection?

need to reproduce an issue with a client-server asynchronous communication (a bunch of JavaScript AJAX vs. an OData api), seemingly caused by some race condition in the calculations when the server and/or the network connection
slow down.
Now, the test environment I have is a local Hyper-V machine, so it's all shiny and fast ... I need it to slow
down to verify it.
Is there any known method to (basically) make a LAN Hyper-V machine to behave like a remote server reached though a crawling internet connection ?

The best method I have found for simulating a crapy internet connection is to put a pfsense router between the server and my test PC and setup the Limiter features.https://doc.pfsense.org/index.php/Traffic_Shaping_Guide#Limiter
This can be used to emulate a slow network, latency or even introduce packet loss to see how your applications react to adverse network conditions.
pfsense can run inside a hyperv virtual machine. So you can set it up then change the webserver network settings to be behind pfsense.
If you don't like pfsense you can use any BSD distro that supports Dummynet.http://cs.baylor.edu/~donahoo/tools/dummy/tutorial.htm

Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L

Hi!
I was sent here from Microsoft Community forum. The question is:
Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
100% repeatable scenarios:
## Scenario 1 ##
1) Log in
2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
3) Check that it has connected
4) Lock screen (Win+L)
5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
6) Unlock screen (using password)
7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
## Scenario 2 - the more annoying ##
1) Log in to Win 8.1 computer
2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
3) Start copying files from computer to server
4) Lock the screen on computer
5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
6) Unlock screen on the computer
7) Click "Try again" and it will continue copying files
My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
When I lock the screen using Win+L it goes into (probably Active) Standby mode.
Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
timeout.
This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
Computer information:
Sony Vaio Duo 13: SVD1322C5E
Intel Core i5-4200U
8 GB RAM
Windows 8.1 Pro 64-bit
Broadcom 802.11n SDIO network adapter
Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
Best regards,
Sergiusz

Same issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
Options accessed through Win+X).
Find attached log file of powercfg -energy -duration 300 ...
Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
Energieeffizienzdiagnose-Bericht
Computername
KRITIAS
Überprüfungszeit
2015-01-10T15:07:47Z
Überprüfungsdauer
353 Sekunden
Systemhersteller
Microsoft Corporation
Systemproduktname
Surface Pro 3
BIOS-Datum
10/16/2014
BIOS-Version
3.11.0350
Betriebssystembuild
9600
Plattformrolle
PlatformRoleSlate
Netzbetrieb
true
Prozessanzahl
67
Threadanzahl
1319
Berichts-GUID
{1a168801-c189-46fe-811c-235e6bf2bd0d}
Analyseergebnisse
Fehler
Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
CPU-Auslastung:Prozessorauslastung ist hoch
Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
Durchschnittliche Auslastung (%)
45.31
Warnungen
Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
10007
Maximale Zeitgeberperiode (100-ns-Einheiten)
156250
Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
Zeitlimit (Sekunden)
900
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Verbundgerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_0250
Portpfad
1,2
Standbydauer (%)
14
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Surface Ethernet Adapter
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_07AB
Portpfad
1,1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Generischer USB-Hub
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_1006
Portpfad
1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Eingabegerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_0797
Portpfad
1,3
Standbydauer (%)
14
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
firefox.exe
PID
5968
Durchschnittliche Auslastung (%)
1.57
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
0.60
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
0.27
\SystemRoot\system32\ntoskrnl.exe
0.16
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
System
PID
4
Durchschnittliche Auslastung (%)
0.59
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.24
\SystemRoot\system32\DRIVERS\igdkmd64.sys
0.12
\SystemRoot\system32\DRIVERS\avc3.sys
0.07
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
dwm.exe
PID
6264
Durchschnittliche Auslastung (%)
0.47
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume4\Windows\System32\dwmcore.dll
0.09
\SystemRoot\System32\drivers\dxgkrnl.sys
0.06
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
Skype.exe
PID
11008
Durchschnittliche Auslastung (%)
0.26
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
0.11
\SystemRoot\system32\ntoskrnl.exe
0.05
\SystemRoot\System32\win32k.sys
0.04
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
svchost.exe
PID
1528
Durchschnittliche Auslastung (%)
0.25
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.16
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
0.02
\SystemRoot\system32\drivers\ndis.sys
0.01
Informationen
Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Aufrufender Modulstapel
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
Energierichtlinie:Aktiver Energieplan
Der derzeit verwendete Energieplan.
Planname
Ausbalanciert (OEM)
Plan-GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Energierichtlinie:Energieplancharakter (Akkubetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:Videoqualität (Akkubetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Videoqualität und Energieeinsparung ausbalancieren
Energierichtlinie:Energieplancharakter (Netzbetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
Energierichtlinie:Videoqualität (Netzbetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Für hohe Videoqualität optimieren
Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
Akku:Akkuinformationen
Akku-ID
1F11LGC_LGCX863568
Hersteller
LGC_LGC
Seriennummer
1F11
Chemie
LION
Langfristig
1
Versiegelt
0
Zyklusanzahl
33
Vorgesehene Akkukapazität
42157
Letzte vollständige Aufladung
44209
Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
S1-Standbymodus unterstützt
false
S2-Standbymodus unterstützt
false
S3-Standbymodus unterstützt
false
S4-Standbymodus unterstützt
true
Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
Verbindungsstandby unterstützt
true
Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
0
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
1
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
2
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
3
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Gerätetreiber:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.

Time Machine backup causes network connections to fail

We have a simple network with OS X Server (10.6.4) + a 10.6.4 Mac client and a Windows XP client. For some time we have been suffering sporadic drop outs of the network connection from the iMac OS X client to the server: the shared drives just disappear and you can't reconnect.
I have now narrowed this down to a problem with Time Machine. By logging on as a user on the OS X Server I was able to observe that the user session on the server suffered the same problem sometimes and this ONLY happens when Time Machine is running - I think its always when Time Machine is backing up the server.
Its an absolutely infuriating problem and very disruptive for our business. I am loath to switch off Time Machine on the server but don't know what else to do. Has anyone else experienced this problem or got any ideas?
Message was edited by: davidav

Yep, Rikakiah, seems you are right, I am not alone! There are two other threads here which discuss the same issue:
http://discussions.apple.com/thread.jspa?messageID=11539266&#11539266
http://discussions.apple.com/thread.jspa?messageID=11539227
From my testing it seems that the problem may be related to some interplay between Time Machine and LDAP - I say this because I can sometimes clear the problem and regain access to my shares by going into Workgroup Manager, removing the group assignments (which give access to the shares), saving the change, then adding the group assignments back.
This made me think that your solution should fix it, but unfortunately although I have excluded /var/db from Time Machine backups, I am still sporadically getting the problem.
Message was edited by: davidav
Message was edited by: davidav

Oracle 8.1.6 Network Connectivity Issues

Greetings,
In essence, I have a web server located at the ISP's site & Database server at my place.
The connectivity is established by ISDN router.
The database server is always given a static IP Address - 172.16.12.28
The Web Server is exposed using 202.177.128.219 - to the web.
And this web server has one more address (for the ISP's LAN) - 172.16.56.2
The gateway settings for this machine are 172.16.56.1 & 202.177.128.129.
172.16.56.1 is a switch.
The database server's is connected to the ISDN router. The IP address of the router is 172.16.20.193 & that of the database server is 172.16.20.194
The database server has one more IP address 172.16.82.5 for its LAN operations.
The gateway settings in the database server is 172.16.20.193.
I am using ODBC to connect from Microsoft Transaction Server to Oracle 8.1.6 Server across a network.
Both the client & the server are NT Server 4.0 SP4
I am able to ping the machine bothways. Even the TNSPING works from the web server to the database server.
I have cross-checked the TNSNAMES.ORA for its accuracy.
But I haven't been able to make SQL Plus talk to Oracle Instance.
Can anybody please help....
Tx in advance...................
Sudhash

If there is a firewall between the web-server and DBServer then open the listener
port on the firewall.
first try telneting to the DB Server on
the Listener port. (i hope u know how to
do this)
If u cant telnet , then there is some one
blocking the listener port

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Networking issue between 2 machines using 1 network connection

Similar Messages

Maybe you are looking for