New analyst report: Android claims top spot in Developer Mindshare

VisionMobile has launched Developer Economics 2011 - the definitive report on mobile developers, apps and brands going mobile.
Here are some of the key insights from the full, 60-page report (available for free download at http://bit.ly/iLtnVh):
· Mobile web as a platform has seen an impressive upturn in usage, and is now in third position in our Developer Mindshare Index. Android and iOS continue to   lead with 67% of developers currently using Android and 59% using iOS.
· Nearly 40% of developers currently using Symbian and 35% of developers currently using Java ME are planning to drop the platforms.
· Today, app stores are the primary go-to-market channel for 45% of mobile app developers across platforms.
Read the full report for the hottest issues of app development, from app design and promotion to monetisation and user support. http://bit.ly/iLtnVh

To answer some of your questions
1 - Phone Call - You can get back to Navigation simply when you are on a phone call. Just press hard button 'Back'. Sometimes you get back to the navigation sometimes not. If not, then pull down the notification menu at the top and choose navigation. Back to maps at that point. The only thing at this point is that you lose the little green light bottom left corner. That is your traffic that shows a potential traffic tie up.
2 - End point - You can use your contacts as the end points. For safety, I input places I want to go to to my contacts with their address's. That way it is much easier than to type in the address on the road. You just select contacts, then scroll up/down to the contact where you are going.
3 - You can close (put to the background actually) the car dock program by pressing close. I put an icon on the home screen for the Navigation program so I can go directly into navigation. You can also program one of the buttons for Navigation (the one called App) so you don't have to go to My Location to get to the Navigation. Saves a step or two.
4 - Yes I have had the phone reboot in the dock a couple of times (owned the phone since it came out). I had it reboot twice in one trip one day, but removed the app that I just installed the night before and had it happen maybe once since.
5 - Personally, I would rather the music cut off when voice is telling me directions, if I ran that way. I turn off the voice directions because I can see when to turn, and have become good at seeing the turn within .1 miles of the turn. If it talked over the music, you might miss voice. But that is my personal opinion
6 - I have not had the problem of the map being off. Every time it shows me at the location (with picture of the location) I have been less than 1/2 a football field from the destination.  Not minimizing your experience, I just haven't seen it happen to me.

Similar Messages

  • How to Customise new ISO27002 reports with iReport

    Hi.
    Any Idea how I can customise new ISO27002 reports on iReports. ISO27002
    reports are included in Sentinel 7.1 and ISO27002 Solution pack. I'm
    especially interested in "Additional criteria" feature, which is not
    found on old reports.
    Sentinel SDK doesn't include ISO27002 reports. I tried to open ISO27002
    reports with iReports. It opens just fine, but when I try to compile
    report, I get bunch of error messages.
    -vesa
    vesakeinanen
    vesakeinanen's Profile: https://forums.netiq.com/member.php?userid=1491
    View this thread: https://forums.netiq.com/showthread.php?t=48711

    Thank's, that helped a lot.
    I found three jar files (master.jar, reportutils,jar and
    taxonomyutils.jar). I added master.jar to iReport classpath ("Add
    File"), moved master.jar to the top of class path, and now I can compile
    report. (I'll add other jar files later, if it seems that those are
    needed too).
    I haven't yet tested if I can actually create a report that works.
    Tomorrow I'll pick one ISO27002 report, tweak it some, and try to import
    it back to Sentinel.
    One extra question. Is there any way to import new ISO27002 report to
    SDK, so I can see those in Eclipse's Sentinel SDK/Reports folder? Or
    should I just open those reports I wish to customize directly with
    iReport?
    vesakeinanen
    vesakeinanen's Profile: https://forums.netiq.com/member.php?userid=1491
    View this thread: https://forums.netiq.com/showthread.php?t=48711

  • My Trips and Expenses - Create new expense report is not coming up..

    Hi,
    We are facing a issue in T&E that, when we try to click on "Create new Expense Report" from My Trips and Expenses it is not coming up..
    And same when we execute the backend application through SE80 it is coming fine.
    Please anyone suggest the root cause..
    Your help would be much appreciated...

    Hi Veer,
    Yes, I just tested this thing out in 11.1.1.5. Please find more details below.
    1. I create a sample 'BIConsumer' user.
    2. Logged into the BI Server.
    3. Navigated to Catalog and clicked on New
    4. I could get only two options 'Report Job' and 'Action Intelligence'.
    To provide proper privileges,
    1. Logged into BI Server as BIAdministrator.
    2. Navigated to Administration -> Manage Privileges -> Catalog/
    3. Given explicit permissions to 'BIConsumer' to create folders and 'My folders and Dashboard'.
    To verify,
    1. Logged back to BI Server as 'BIConsumer' user.
    2. Now, in the catalog could see 'New Folder' option under 'My folders'
    For further analysis, can you please check which roles this particular user is having? You can click on username at the top right corner -> My Account->Roles and Catalog Groups.
    Thank you,
    Dhar

  • Turn Off BOXIR2 InfoView New Crystal Reports Document

    How do you turn off the option of creating a new Crystal Reports document in InfoView?
    We are only using the Web Intelligence functionality at this time in InfoView and the 'Crystal Report' option in the 'New' menu is causing confusion and curiosity and we want to be able to turn it off.
    Any suggestions or documentation I can reference?
    Thanks,
    John Ward
    Cleveland Clinic

    Hi John,
    The below solution will not turn off the Crystal Report creation option from New tab in InfoView but it will not show the any option related to creation of Crystal Report. This will ensure that user can not create any crystal report from Infoview leading to step away the confusion and curiosity about it.
    You can specify the Crystal Reports Explorer features that are available to each user.
    Please try out the following.
    1) Log on to CMC as as Administrator.
    2) Go to BusinessObjects Eneterprise Applications; then click Crystal Report Explorer.
    By default, each user is granted full access to all the available features. You can set the availability of each feature for specific users, or for groups.
    3) So accordingly select Manage group or Manage Users Tab; and select the user or group whose options you want top modify.
        3.1) If you want to set a user's access rights to be the same as for each group to which the user belongs, select Use Group Rights
       3.2)If you want to set specific access rights for the user, ensure that you clear Use Group Rights check box, then select or clear features from the hierarchy of available options.
    If users belong to more than one group, they will receive the combined access rights for all the groups to which they belong.
    Reards,
    Someer

  • Generate a new pdf report with itens on my pdf form

    Hi! My name is Heitor.
    I have Adobe Forms Central and Adobe Acrobat XI Pro installed on my machine.
    I would like to know if its possible to make a pdf report.
    Example: Clicking in a button "print" on my already open and filled pdf form, and gathering all my 30 itens (see that i am only showing 5 itens on my form. but on my form exists a "Add" button to add itens on variables) on a dropdown list and generating a new pdf report with all these itens listed.
    Thanks!
    Heitor Teixeira
    www.heitorteixeira.com

    Hi! My name is Heitor.
    I have Adobe Forms Central and Adobe Acrobat XI Pro installed on my machine.
    I would like to know if its possible to make a pdf report.
    Example: Clicking in a button "print" on my already open and filled pdf form, and gathering all my 30 itens (see that i am only showing 5 itens on my form. but on my form exists a "Add" button to add itens on variables) on a dropdown list and generating a new pdf report with all these itens listed.
    Thanks!
    Heitor Teixeira
    www.heitorteixeira.com

  • How to copy existing query report into new query report in SQ00

    Hi Experts,
    Hi Experts,
    I want to add fields "company code" "'region" to existing  query report AQZZ/SAPQUERY/FKF1============
    (list of vendor address) for this i done as following:
    1.In SQ01  go to "EDIT->other user group" and i selected user group as /SAPQUERY/FK
    2.I typed F1 in query field and click change button
    3.I clicked next screen button and entered into "change query f1: select fields screen".here i clicked "basic list" button and searched company code checkbox and saved it as result company code is appearing in the standard report"AQZZ/SAPQUERY/FKF1============"
    but unfortunately there is no region field(LFA1-REGIO) for this i think i should copy the existing  query report  into new query report(Ex:Z_LIST_OF_VEND) which should be 14 characters.please tell me briefly how to do this because this is first time i am using SQ00.
    one more issue is when i selected "edit-otheruser group" and choosing /SAPQUERY/FK  i  am getting only infoset "/SAPQUERY/FIKD" but i should need Info set: "/SAPQUERY/FIDD" please tell me how to add the previous one into user group.i think if i got /SAPQUERY/FIDD into usergroup  /SAPQUERY/FK i can add region also into Query report as i mentioned above by going SQ01 ...............................
    please help regarding this which should be very beneficiary to my carrier.
    Regards,
    naresh

    Hi Experts ,
    I solved issue by changing infoset in SQ02 by means of assigning field to field group and changed the query in SQ00.
    Regards,
    naresh.

  • New customized report using PLD or QUERY PRINT LAYOUT to show customers onl

    I am working with a Software Developing firm as an SAP Consultant.
    Please tell me how to create a new     customized     report displaying various details as required by the client in the report using PLD or Query Print Layout.
    Please help me asap.

    Hi,
    You can create queries using the Query Generator or the Query Wizard tools.
    After you have created your own queries, you can link them to a required print layout.
    for user reports.Look at:
    Tools --> Queries --> Query Print Layout
    Set there your query reports.
    Printing User-Defined Queries
    After you had linked a user-defined query to a user report template, you can now print it
    according to its linked print layout.
    There are two ways for printing your user-defined queries.
    1. Using the Query Print Layout window:
    • Select from the upper menu Tools 􀃆 Queries 􀃆 Query Print Layout.
    • Click the Reports tab page.
    • Click to highlight the required query you would like to print.
    • Click on the printer icon or select from the upper menu File 􀃆 Print.
    • The user-defined query is printed according to its linked print layout.
    2. Using the Queries Manager window:
    • Click the Queries Manager icon on the upper tool bar.
    • Click to highlight the required query you would like to print.
    • Click on the printer icon or select from the upper menu File 􀃆 Print.
    • The user-defined query is printed according to its linked print layout.
    Note! You can also print preview user-defined queries. Do so by selecting the Print
    Preview option as described in the methods above for printing your query.
    Btw, you could search the manual training files relate to query PLD in http://www.service.sap.com/smb
    Rgds,

  • REPORT HEADING ON TOP CENTRE

    Hi experts,
    actually in my ALV report i want to display the name of the report on top centre of the page. for this i used FM
    ALV_REUSE_COMMENTARY_WRITE.
    AT PRESENT I AM GETTING THE REPORT HEADING ON TOP LEFT.
    COULD U PLZ HELP  HOW TO GET THE REPORT HEADING ON TOP CENTRE .
    REGARDS,
    SIRI.

    Hi Sireesha,
    Just try like this and see
    WRITE 'Centered Text'(120) TO LS_LINE-KEY centered.
    APPEND LS_LINE TO IT_TOP.
    CONCATENATE v_date v_time INTO LS_LINE-INFO
                               SEPARATED BY ' '.
    APPEND LS_LINE TO IT_TOP.
          CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
            EXPORTING
              IT_LIST_COMMENTARY       = IT_TOP
            I_LOGO                   = I_LOGO
            I_END_OF_LIST_GRID       = I_END_OF_LIST_GRID
            I_ALV_FORM               = I_ALV_FORM
    Regards,
    Vidya

  • I downloaded a program to be able to open docx diles and now every time I try to open one there are endless new tabs that read "new Tab" scrollomig across the top of the screen. How do I make it stop?

    I had an old version of office so I tried to install a free download that will allow me to open docx files. Now when I try to open one and endless stream of tabs that say "New Tab" scrolls across the top of the page. How do I make it stop. I already went and got office 2010 but it is still doing it. It does not do it if I use Internet Exployer for the browser.

    See [[Firefox keeps opening many tabs or windows]]

  • Before every time I use to open a new tab it comes as top site. Now not anymore and instead is an automatically website calle Only Search. I went to Safari preference I change everything and when I quit Safari all the changes are gone.

    Every time I used to open a new tab it comes as top site. Now not anymore , instead it open in a website called Only Search, I went to safari preferences and made all changes but after I quit Safari and open again all changes are gone. I can not change anything and new tab comes by it self with other website.

    There is no need to download anything to solve this problem.
    You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Besides the files listed in the support article, you may also need to remove this item in the same way:
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.

  • New-Asset Report - awesome, but can't get it to run?

    Howdy - I am trying to run the awesome new-asset report that Zachary Loeber shared with the technet community.
    The script is here:  http://gallery.technet.microsoft.com/Excel-and-HTML-Asset-0ffbf569
    However I can't get it to run against 1 server or multiple servers.
    I followed this information someone else asked and I get back many errors, all related to the parameters.
    Can someone help me out with this?
    A. Should this be saved as a function? And then I've read conflicting or maybe different ways to run a function.  Should I do import-module or just run the script as a single command line, and I've had this issue with other functions.  Should they
    be put in a specific location on my system?  I'm newbie, so thanks for the help!
    B.  When I run this, I've tried using this simple command:  .\New-AssetReport.ps1 -Computers testserver1.domain.local -PromptForCredentials -Verbose
    C.  Then I tried this example as well from a single line or creating another ps1 script, fails either way.
    D.  What variables are required to be filled in, and what parameters are available such as report type, include memory, but not disk, etc?
    Here's the error if I enter the command like this:  .\New-AssetReport.ps1 -Computers testserver1 -PromptForCredentials -Verbose
    New-AssetReport : Cannot process argument transformation on parameter 'SaveDataFile'. Cannot convert value
    "System.String" to type "System.Management.Automation.SwitchParameter". Boolean parameters accept only Boolean values
    and numbers, such as $True, $False, 1 or 0.
    Here is the error if I use the other example which is below.  I get many errors, all tied to the parameters such as -verbose, etc.
    $Servers = @('Server1','Server2')
            .\New-AssetReport.ps1 -Computers $Servers -PromptForCredentials -Verbose
    New-AssetReport : The term 'New-AssetReport' is not recognized as the name of a cmdlet, function, script file, or
    operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
    again.
    -ReportContainer : The term '-ReportContainer' is not recognized as the name of a cmdlet, function, script file, or
    operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
    again.

    Hi,
    Please ask the author your question on the Q&A tab for that gallery entry.
    Bill

  • Hierarchies for New GL reporting

    Hi,
    what is the best way to create hierarchies so to visualize it in the correct way in New GL Reports created in FGI1.
    Thanx 1000.
    Diego

    For the GL view create a Financial Statement Version.
    For PCs and CC's either use the standard hierarchies, or groups.

  • New VAT report Italy

    Hello,
    I need to know if SAP has done some work (or is now working on) on the new VAT report for Italy. From year 2006 it is mandatory to send to fiscal authorities(from Internet) a list of customers and  vendors with total VAT and not VAT amounts - this is mandatory for all companies with VATCODE  IT (Italy).
    Thank you for help,
    Slawek
    Latest update: please see the sap note 990185 - all the details are described.
    Message was edited by:
            Slawomir Ptas

    Hi,
    you can update the table with new entry for the Region.
    Regards,
    Srinivas

  • New to report

    hi gurus
    i am new to report i know how to design but i don't know how to write triggers as someone said we cannot learn report by asking question in forums so i need some web help by those example learning i can do well so please send some thing regarding that

    Hi,
    Check out
    http://www.oracle.com/technology/documentation/reports.html
    Nilaksha

  • How to use BAPI to add a new version for a claim number in WTY transaction.

    How to use BAPI to add a new version for a claim number in WTY transaction.
    I am using  function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
    It needs to copy all contents of previous version to a new version.
    While doing so i am unable to copy fields like valic valoc etc. Any ways by which  i can copy this values.
    WTY will update PNWTYH , PNWTYV and PVWTY tables.
    Thanking you,
    Lokesh.

    Hi Vishnu,
    You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
    Rewards point if you think this info is useful
    Regards,
    Dipender Singh

Maybe you are looking for