New BarCode Type to print Brazil Boleto forms

Hi
We have requirement to print BOLETO form with Bar Code for Citi Bank Brazil. As per Citi Bank manual provided, we need to print the Bar Code with bar code type "INTERCALATED type 2 of 5".
But in SAP, when we create new custom bar code(ex. ZBAR2) using SE73, we are not finding the above said bar code type.
The nearest match is 2OF5 ( Bar Code ITERLEAVED 2 OF 5). We used this, but the output of bar code printed is not upto the expectation.
Please can someone help on how to bring/install the new bar code type INTERCALATED in SAP.
Thanks in advance.

hi,
as for reference i did the same and it is working fine for me...
pls check that smartstyle character format is activated and u assign this characterformat to the variable to print as barcode.
if it works with standard barcode then try to create one for zbarcode for reference.
se73--> system barcodes --> create..
Regards
CNU

Similar Messages

  • Aztec and other new barcodes inside PDF print forms

    Hello!
    Currently we have a form obligatory in communication with several banks in Russia. This form has Aztec barcode on it. Barcode is added using special virtual printer software (supporting only PCL output and working fine from Windows apps like Notepad, Office, etc.).
    Now when trying to create the same form is SAP and print it from there (or from Adobe Reader) there's no barcode generated, cause SAP and Reader are sending data in RAW format.
    Is it possible to extend the number of barcodes available in Adobe Designer (and on Adobe server of course) for development of print forms?
    Regards,
    Petr Perstnev

    The answer is currently "No". Cause SAP delivers Adobe LiveCycle Designer ver. 8.0x as part of its solution. When SAP is going to support Adobe LiveCycle Designer ES (8.2 or later) than it will possibly become "Yes", cause ALD ES supports Aztec.
    Correction: ALD ES (8.1 and later) supports Aztec only in the form of Hardware rendered barcode,
    so special printer (Zebra or smth) is needed to print such bcodes.
    Edited by: Petr Perstnev on Apr 9, 2009 4:39 PM

  • New barcode type

    I want to print Barcode type Code 128 Width 4cm and Height 1cm.  I checked SE73. I don't find there. I tried to create one on my own and it is not working.
    Any suggestions to make it work.
    Thank you,
    AP

    hi,
    as for reference i did the same and it is working fine for me...
    pls check that smartstyle character format is activated and u assign this characterformat to the variable to print as barcode.
    if it works with standard barcode then try to create one for zbarcode for reference.
    se73--> system barcodes --> create..
    Regards
    CNU

  • Bar Codes printing in SAPscript form

    Hello everyone,
    Please help me with barcodes printing problem:
    We are using ECC 6.0, and printer HPLJ 2300 series PCL 6
    I have installed BARCODE.DLL, and it is located in my local PC, in folder SAPgui\SAPlpd, i.e. where SAPlpd.exe file is locating.
    I printed assets bar code labels using tc S_ALR_87010137, and using script form FIAA_0003, but in print preview there were just solid boxes and after print-out there were no boxes at all, just text! Then I created new script form and assigned new barcode type, but printed barcodes were still invisible on the paper list.
    Where is the problem?

    Just do the following check items-
    1) try to print any standard form ( PO, SO etc.) from SAP printer but not through local printer. ( Spool should not be generated; check it in sp02.)
    2) If it printed perfectly, then it is supposed to print the barcode too. You cannot print the barcodes using the local printers. Usually it required special printers
    ( zebra etc..).
    else if it is not printing properly tell the basis that they havenot configured the printer properly.
    we are doing presently printing of barcodes using both zebra & sap printers.
    Let me know, when you are through this basic check list.

  • Problem with new format type in spool

    Hi All,
    I have created new format type with 65 pages & 140 columns size. I have assigned it to corresponding device type which is copied from standard device type. Then i have assigned to output device type.
    But when i print using this new format type its printing in half of the page width. What should be dont if i want print in whole paper width.
    When i use standard format type x_65_132 , its printing in whole page width of 132 columns. But with my new format type its printing all line content , but its printing in very small font within half of the page width. It should print in whole page. Please help me to print in whole page width with bigger font as in 132 column options.
    Thanks in adavance.
    Vishal

    Norman,
    Thanks for ur reply.
    I have gone through all the stpes for creating new format.
    I don't know what is printer initialization string and the other escape sequences, how to get modified these please let me know.
    new format is working, but problem is its printing in half of the page width, i need to print in whole page width. Thanks.

  • Barcode is not printing but it appears alright in preview

    Hi Guys
    I am trying to print a barcode in sap script. Barcode is coming perfect in print preview but it is not appearing in Printing. It is displaying the value for of the variabke for which i m trying to print the barcode in printing. Do certain settings need to be made for printing barcode in scripts?

    Hi Richa,
    Check in SPAD if the output device supports the Barcode or not.
    You could ask Basis and they will add the barcode type to printer fonts if it is not there.

  • Creation of new Print Program & Variant for new Correspondence Type created

    Dear Friends,
    I have created 2 new Correspondence Types in SAP as SAP61 (Vendor Debit Note) & SAP62 (Vendor Credit Note) by copying SAP09 (Internal Document) properties like itu2019s Name of the print program - RFKORD30 & Name of variant - SAP09.
    We are facing problem when we execute print program in F.64 for SAP09 it is coming same like SAP61 or SAP62. Actual script & print values of SAP09 are replaced by SAP61 or SAP62.
    Please suggest us how we can differentiate both SAP09 & SAP61/62. Because we use these correspondences for different purposes like SAP09 gives the information for the Line items in the Document whereas SAP61/62 gives the information of vendor line item weather it is debit or credit entry.
    Your kind co-operation in this matter is highly appreciated.
    Thanks & Regards,
    Naveen Kumar.P

    "Assigned the from to the company code - progam in V_001F_B"
    Check 'Form ID' field in this IMG transaction against the program and form that you have created.
    I am assuming there are 2 lines with same entries but different form IDs.
    Or there are 2 lines with the same entries but different CoCodes (seem to remember that the CoCode is not taken into account as a key in certain programs - not logical i know but remembered a previous issue I had many moons ago - could be to do with the blank entry for CoCode field if there is one being picked up by the program before the entry that has your CoCode).
    Now check the variant attached and Form ID in step 'Created new program variants in SA38'
    Ensure the correct program and variant are attached in step OB78.
    My assumption is Form ID is the key.
    Hope this helps

  • Problem while print preview purchase order for new document type

    Dear Experts,
    I have got the problem as below and need your helps.
    I created a new purchasing document type and then created a new PO with this document type. PO was created successfully in the system. I added a message to print out PO with the followed parameters as NEU output type, 1.Print Out medium , VN partner function, dispatch time is 3 ( Send with application own transaction).
    Then, I clicked Print Preview button on the ME23n screen, the error message bellowed was shown
    "The combination of  document type
    and Purchasing organization is invalid.
    please check the document and change it.
    unable to print the form"
    I really want to print the PO with new purchasing document type on the existed purchasing organization, Could you please help me identify the problem and solution for this issue?
    Appreciate for your responses.
    Thanks,
    Tinh Vo Trung
    Edited by: Tinh Vo Trung on Sep 23, 2011 7:43 AM

    Dear All,
    Many thanks for your responses.
    Regarding to maintain the condition record in MN04, I already done for that but the problem was not resolved.
    Could you please come with the other posible causes and solutions for this issue?
    Dear Bijay Kumar Barik,
    Please let me know why we check the new document type in Program, Routine and From of NEU output type?
    p/s: I compared the version the program, FORM and routine of NEU output type and found that there is no the differences btw DEV server and QAs server. However, An PO created susscessfully in QAs server, but the error was happend in DEV server.
    Could you please come with the other posible causes and solutions for this issue?
    Thanks,
    Tinh Vo Trung

  • New condition type print preview time out.

    Dear all,
    I am a ABAPer.
    I am facing one problem in PO Print preview.
    My MM consultant defines one new condition type-ZPF5 .
    Instead of ZPF2 we are using this condition type- ZPF5.
    After that in PO ,Net value & everything coming fine.
    There is a smartform also related to this.
    I have added all logic related to ZPF5 .
    But when going to print preview In production & clicking on print preview,
    It is giving time out after 9-10 mint-Time out for ALL po,not only for this condition related .
    v_no = &SFSY-JOBPAGES& -1. "in this line.
    &SFSY-JOBPAGES& means " Total number of pages in the currently formatted print request.
    I saw M/08 - ZPF5 Print equal to 'X ' & Statistics is ticked for this.
    But when I revert back old SMART FORMS & PRINT = blank,print preview is coming fine for all PO except
    ZPF5 Is not affecting in print preview,but in PO affecting.
    Any help from MM side?
    Thanks
    Gourav.

    Dear all,
    Issue resolved.
    I have changed my select query & remove old condition from that,now I am using only ZPF5.
    Like :
    SELECT SINGLE KBETR KWERT KRECH FROM KONV INTO (V1_KBE,V_PF,V_KREC)
             WHERE KNUMV EQ V_KNUM AND
                   KPOSN EQ WA_MAT-EBELP AND
                   KSCHL EQ 'ZPF5'. " not zpf2
    Thanks all for your time.
    Thanks
    Kumar Gourav.

  • Barcode printing in ADOBE form when data and Barcode are in different pages

    How to send raw value to the Barcode when data values are availabe in Master  page and Barcode in the Design page.
    Barcode needs to print once on the first page, so it is on Designer page.
    Values needed for display of barcode is avilabe on Master page.
    How to communicate data between Master page and Designer Page in ADOBE Form?

    Hi,
    Declare a variable of character type and concatenate DTAP and Bar code value into that variable.
    Later print that in required bar code format.
    Try this.

  • Printing different barcode types..!

    Hi Guys,
                  I have a requirement to print barcode of materials, the barcode type varies depends on the length of material No.
    How this can be acheived in Adobe form ?
    I am looking to control the visibility of the barcode through some conditions.
    Also how I can loop through a internal table to print the barcode, which should each one in a separate page.
    Thanks
    Sam

    It is a javascript-statement. IF you aren't familiar with javascript it is hard to develop a adobe-form at all.
    My first case would be to make yourself familiar with the concept of Adobe-forms. You can work thorugh the getting started content provided by SAP and Adboe. There you will get a lot of basic experience on that tool itself and formclac/javascript.
    Anyway, here is the JAvascript-example for the case you need to complete the solution:
    switch(this.yourfield_barcodetype.value)
    case "A":
      execute code block 1
    case "B":
      execute code block 2
    default:
      code to be executed if n is different from case 1 and 2

  • List of script and smart forms(except TNAPR) with output type or print prog

    How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA  whch form should use.kindly help on this

    Hi
    WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
    WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
    The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
    Max

  • Brazil Boleto Barcodes - Single Barcode for multiple vendor invoices

    Hi All,
    I have the following two questions in Brazil Boleto process.
    1) The vendor is giving a single boleto bar code for multiple invoices. However when we are entering the barcode in the Bank reference field, the last digits are getting changed as the system is picking the amount of that particular invoice in the barcode instead of the consolidated amount of all the invoices?  How to handle this scenario in SAP?  Is it possible to handle the single Boleto bar code for multiple invoices case in SAP?
    2) In F110 Automatic Payment run, we want to pick only the Vednor invoices for which boleto barcodes are updated. Is there any standard way of only picking the invoices updated with barcode only in the F110 payment run?
    Advance thanks for your help.
    Regards
    Kotesh Padarti

    Hi Hussein Merchant ,
    For your requirement you have to do single payment at F-53.There you need to select Other account check box at open item selection.Give the all open item vendor codes and get a cleared document number.
    Go to FCH5 and assign manual single check here
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

  • New document type--printing PO

    Hi, I created new doc types and I noticed that the POs created under the new doc types did not displayed anything in the Messages (printing).  Do I have to configure the output control? if yes, how? thanks so much!

    Hi
    You may not view it in the dropdown list, for message setting whe you are creating the condition record, you select the output type in MN04 (NEU or any other customised out type for PO) , from the key combination when you are selecting Purchasing output determination: Document type and executing , you will find the condition record fields enter your new document type directly instead of selecting it from the drop down. It will pick the details as you wish. There is no configuration required for this.
    Regards

  • Is there a way to create new Barcodes for Adobe Printforms

    Hi All,
    As far I know there is currently no way to add new barcodes to the Adobe designer..SAP Note #430887 says the same..
    Can I get any exact SAP note which states that adding new barcodes is not currently possible..
    If there is any way we can do this please let me know..
    Appreciate your time..
    Thanks,
    Sethu

    Hi,
    I hope this will help you.
    MW6 Barcode DLL for SAP R/3 is compatible with SAPsprint and SAPlpd, it allows you to print 1D barcodes.
    Example:
    Code39, Code128, EAN13, EAN8, UPCA and UPCE,
    PDF417, DataMatrix, Aztec and QRCode virtually on any windows printer from SAP R/3 system.
    TBarCode/SAPwin is a Barcode DLL for SAP R/3, SAP ECC and mySAP ERP. This barcode DLL extends SAPsprint, SAPlpd and SAPWIN DLL with barcode printing features.
    TBarCode/SAPwin prints ALL common linear and 2D bar codes on all Windows printers.
    Costly barcode equipment like barcode cartridges, barcode fonts or barcode printers are avoided! TBarCode/SAPwin works with SAPscript, ABAP and SmartForms. All SAP-forms are supported without modification.
    Thanks

Maybe you are looking for