NEW Design Layout Using Omnipotlet...?

Hi All,
Is it possible to build a "Customized Design Layout" using OmniPortlet...?
How can i achieve this in OracleAS Portal V 10.1.4...?
Please help me
Regards,
Kalyan Chandra

You can do this using the HTML layout of omniportlet and please have a look at the following link to get more details:-
http://download-east.oracle.com/docs/cd/B14099_19/portal.1014/b14135/pdg_op_ex.htm#CHDEBHCF
-- Guneet

Similar Messages

Ultiboard 11 - New design layout challenges

Hello again NI team,
We have just recently started designing new PCBs using Ultiboard 11.0.1, and we've run into several challenges with the software, on issues ranging from setting up Global Preferences, to basic trace routing. Below are some of the issues we've discovered this past week:
Trace vias can be moved and disconnected from their trace, and cannot be used to drag a trace by themselves.
It is impossible to move two traces connected with a via without either creating two opposing all-angle traces, or disconnecting the trace from the next vectors.
Vias apparently only come in two sizes; standard and micro. (no drop-down for multiple sizes within one design)
Without any explanation, the ability to drag a component and have the trace redraw can be lost, whether with manually drawn traces or follow me traces. (‘Part drag’ in Global Prefs. was still checked)
Redrawn traces change path significantly despite net topology set to ‘shortest’.
If a trace is manually moved, attached 90 degree bends are lost. UB11 automatically inserts rounded/chamfered corners.
If you move the trace further out, original geometry is lost altogether.
DRC filters are not saved within the PCB, and must be re-added every time the file is opened.
Layer visibility toggling has no keyboard shortcut. Only option is a two-click process in design toolbox.
‘Global Preferences’ such as color scheme, are not saved to the program, only the PCB. Newly created scheme settings are not saved once the program is exited.
Traces drawn using ‘follow me’ can be attached off-grid. There is no clear way to move the trace back onto the grid. This makes manual adjustment impossible without redrawing the entire trace.
Manual moving using the mouse to drag, or pasting of copied traces or objects results in 0.5 mil spacing, despite all PCB grids being set to 5.0 mil or higher.
A section of a trace that is re-routed can become a separate piece of a trace, even when perfectly inline with the sections attached to it. This necessitates multiple selections when attempting to move a single trace run, or deleting and rerouting the trace manually.
We are eager to use many of the advanced features available in this software, but these issues are making the process quite tedious. Are there functions we are overlooking?

AVPro,
Hello. There are a few things here that we can help with through some simple work arounds, some things have been sent in as feature requests... others I'll need to look at directly to reproduce and see if there is something that can be done. Please send me an email to setup an online discussion ([email protected]).
Here are my intial thoughts - but we are certainly interested in helping you out and making you successful using the tool. Also v12 may have addressed some of these things, but I'll need to follow up directly to verify....
Trace vias can be moved and disconnected from their trace, and cannot be used to drag a trace by themselves.
It is impossible to move two traces connected with a via without either creating two opposing all-angle traces, or disconnecting the trace from the next vectors.
Try this: highlight the VIA and the connecting trace segment(s) by drawing a box with the mouse around the via and the segments of interest. Now when you move the via with the arrow keys, the traces should 'rubber band' with the VIA. I agree its not as nice as just dragging the VIAs and having the traces move with the VIA, but its the best work around I have for now.
Vias apparently only come in two sizes; standard and micro. (no drop-down for multiple sizes within one design)
Yes, this is an active feature request into R&D - better VIA management / sizing. You can adjust the VIA one by one (and adjust) but you can only setup/select 1 standard via as default and adjust as needed throughout the design. This is something I have tried to prioritized with R&D.
Without any explanation, the ability to drag a component and have the trace redraw can be lost, whether with manually drawn traces or follow me traces. (‘Part drag’ in Global Prefs. was still checked)
Redrawn traces change path significantly despite net topology set to ‘shortest’.
If a trace is manually moved, attached 90 degree bends are lost. UB11 automatically inserts rounded/chamfered corners.
If you move the trace further out, original geometry is lost altogether.
I think many of these things have been improved in UBv12, however I think we need to take a look at the design specifically. You can use the <space> key to change the geometry as you are routing, but I am not sure about preserving redraw (lets look at in both v11 and v12).
DRC filters are not saved within the PCB, and must be re-added every time the file is opened.
We'll have to check on this for v12 - I think this was addressed.
Layer visibility toggling has no keyboard shortcut. Only option is a two-click process in design toolbox.
I think you are correct from a visibility standpoint, but when routing you can setup 'preferred layers' - F(X) keys and toggle between layers when routing (Q key in v12). There are some suggested tricks to setting up visibility in UB - as an example if you have a ground plane, I suggest coloring that a dark color (gray) and then it will appear always in the background no matter the layer visibility settings.
‘Global Preferences’ such as color scheme, are not saved to the program, only the PCB. Newly created scheme settings are not saved once the program is exited.
Ok - agreed - this should be changed to a universal scheme setting as a default.
Traces drawn using ‘follow me’ can be attached off-grid. There is no clear way to move the trace back onto the grid. This makes manual adjustment impossible without redrawing the entire trace.
Manual moving using the mouse to drag, or pasting of copied traces or objects results in 0.5 mil spacing, despite all PCB grids being set to 5.0 mil or higher.
Ok - I'll need some additional information on this - can you send me a direct email so we can setup a dialog ([email protected]).
A section of a trace that is re-routed can become a separate piece of a trace, even when perfectly inline with the sections attached to it. This necessitates multiple selections when attempting to move a single trace run, or deleting and rerouting the trace manually.
Is the net settings getting changed? Again lets look at this and we'll see what can be done (I'll try in v12 and see if its better).
Regards,
Pat Noonan

KM News creation for different layouts using xml form builder

Dear All,
We have a scenario where we need to create a xml template to generate KM News. The same KM News template should have three different show forms (with different design layouts).
At Edit form there will be 3 option buttons based selection of these option button respective Show form should be displayed.
Ex:
If the user selects "Option 1" it should show "ShowForm 1"
If the user selects "Option 2" it should show "ShowForm 2"
If the user selects "Option 3" it should show "ShowForm 3"
Any help will be appreciated and rewarded points.
Thanks,
Satya

>
Yogesh Galphade wrote:
> you can achieve this using web page composer, it provides standard funcationality for RSS feeds.
> Deploye bussiness package for wpc from market place. There is standard role to create webpage.
Can you Please elobrate on this, i have RSS function in web pages but rss feed is not working.

[svn] 4634: First part of glue code for allowing Halo components to use the new Text Layout Framework , in order to get functionality such as bidirectional text.

Revision: 4634
Author:   [email protected]
Date:     2009-01-22 17:38:56 -0800 (Thu, 22 Jan 2009)
Log Message:
First part of glue code for allowing Halo components to use the new Text Layout Framework, in order to get functionality such as bidirectional text.
Background:
TLF is making this possible by implementing a TLFTextField class. It is a Sprite that uses TLF to implement the same properties and methods as the legacy TextField class in the Player. Thanks to the createInFontContext() bottleneck method in UIComponent, it can be used by a properly-written Halo component (such as those in Flex 3) without any modifications to the component.
Note: Text should render similarly -- but is unlikely to render identically -- when a component uses TLFTextField vs. TextField. The width and height may be different, affecting layout; text could wrap differently; etc. This is a fact-of-life based on the fact that TLF/FTE and TextField are completely different text engines.
Whether a Halo component uses TLF or not to render text will be determined in Flex 4 by a new style, textFieldClass. (Gumbo components always use TLF.)
TLFTextField is currently only partially implemented. It does not yet support scrolling, selection, editing, multiple formats, or htmlText. Therefore it can only be used for simple display text, such as a Button label.
Details:
The TextStyles.as bucket 'o text styles now includes a non-inheriting textFieldClass style. It can be set to either mx.core.UITextField or mx.core.UITLFTextField. These are the Flex framework's wrapper classes around the lower-level classes flash.text.TextField (in the Player) and its TLF-based workalike, flashx.textLayout.controls.TLFTextField.
The global selector in defaults.css currently sets it to mx.core.UITextField using a ClassReference directive. For the time being, all Halo components will continue to use the "real" TextField.
The new UITLFTextField is a copy of UITextField, except that it extends TLFTextField instead of TextField. This class has been added to FrameworkClasses.as because no classes in framework.swc have a dependency on it. It will get soft-linked into applcations via the textFieldClass style.
The TLFTextField class currently lives in a fourth TLF SWC, textLayout_textField.swc. This SWC has been added to various build scripts. The external-library-path for building framework.swc now includes all four TLF SWCs, because UITLFTextField can't be compiled and linked without them. However, since they are external they aren't linked into framework.swc.
Properly-written Halo UIComponents access their text fields only through the IUITextField interface, and they create text fields like this:
textField = IUITextField(createInFontContext(UITextField));
(The reason for using createInFontContext() is to support embedded fonts that are embedded in a different SWF.)
The createInFontContext() method of UIComponent has been modified to use the textFieldClass style to determine whether to create a UITextField or a UITLFTextField.
With these changes, you can now write code like
to get two Buttons, the first of which uses UITextField (because this is the value of textFieldClass in the global selector) and the second of which uses UITLFTextField. They look very similar, which is good!
Currently, both Buttons are being measured by using an offscreen TextField. A subsequent checkin will make components rendering using UITLFTextField measure themselves using an offscreen TLFTextField so that measurement and rendering are consistent.
QE Notes: None
Doc Notes: None
Bugs: None
Reviewer: Deepa
Modified Paths:
    flex/sdk/trunk/asdoc/build.xml
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/framework/defaults.css
    flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/TextStyles.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITLFTextField.as

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Using formula in Print Design Layout

I need to use the formula fields in teh print design layout procedures. I would like to create a field which displays a content conditioned on another field. IF-THEN-ELSE
suppose Field_88 needs the formula
IF(Field_87=="mom") THEN display "Hi Mom" ELSE display nothing
Regards
Henrik Lyder

Henrick,
You are on the right path. From what I understand about your requirement I am giving below the steps.
Step1: Add a formula field and in the Field Properties window of that field in the Content Tab. Reference the field whose Value you are checking.
Let us suppose Field_89 is your new formula field and in the Contents Tab you will have Field_87=="mom".
NOTE: There is no need for the IF. Just Field_xxx=="value".
Now in Field_88 properties in the General tab select Field_89 as the Link to field. When you do this if the Formula in Field_89 is TRUE then this field will appear. If you want Hi Mom to appear then define Field_88 as a Formula field too and in Content tab set function Concat("Hi ",Field_87)
Let me know if you have questions
Suda

How to design a layout using coding?

hi
how to design a layout using coding?

Could this help you??? <a href="https://wiki.sdn.sap.com/wiki/display/profile/2007/07/19/Editingthestandardtemplateforanewprogram">https://wiki.sdn.sap.com/wiki/display/profile/2007/07/19/Editingthestandardtemplateforanewprogram</a>
Greetings,
Blag.

How to manually create a Report Layout using Crystal

I am trying to create a new layout using Crystal for my Statements using BP Aging . the out of the box Crystal report for that will not work and it would be easier if i just decide what tables I want to look at. The problem is i am not sure how to set up the parameters so when i print from the aging it will automatically fill in my parameters with the correct information. I have already written the report but when i attempt to print from the Aging report it asks me for my perimeters every time. I tried to look at the out of the box version but it does not even use perimeters so i have no idea how SAP feeds Crystal what information to filter by. I'm using 8.80 PL 16 thank you in advance for any help you can give.
Edited by: Megan Salem on Oct 31, 2011 5:31 PM

not really, The system one all comes from some sort of "pld" table and the only designations are the f-numbers (F_124) and i don't have a clue what those are, and when i try to link what should be an the invoice number to the OINV table other things come back blank even when i use left join. I need some of the information that is provided but i need more than what is currently there so i need the ability to link to the other tables and have it work for every one. (I'm trying to make it more like the dunnung statement only so it can be run at any moment in time and give the exact amount owed.)

Can I copy/move my Dreamweaver website content onto a new design or template?

Apparently the design of my website is not user friendly. I want to easily transfer its content onto a brand new design without all the coding difficulty. Is this possible? This is the website: http://apathykills.site11.com/MyMediaPage1.htm

Vanillaman wrote:
a brand new design without all the coding difficulty.
The difficulty is a function of your knowledge of the code behind your structure and content.
The trickiest coding can be achieved using a three column model like this.
Simple Three Column CSS Layout (Split Sidebars) - Theme Foundation
Then you can cut & paste your content into the new structure.

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

How can i exchange for the new design

Last year my sister purchased a ipod shuffle 3rd gen, for my 10 yr old daughter. She bought it from Target and spent $145.00 at that time. Shortly there after i became aware apple had replace this 3rd gen shuffle with a new design. One that is more user friendly, especially for my 10 yr old. I have to say we have been very disappoint with her ipod for several reasons.
1. there is no face so you cant see what your doing
2. you must memorize the amount of clicks in order to operate it.
3. we have only been able to upload new music to her ipod once since she got it a year ago. Even with online tech support,reading online forums,owner manuals, help from family and friends. To no avail.
She has it still in the box neatly packed away. Its used as a show piece on her dresser to show that she has an (ipod). Neadless to say she does not use it,does not like it mainly because there is no display panel which make it very difficult for her to function.
So how can i exchange/replace the old design ipod shuffle generation 3 for the new design.

Try disabling your firewall and try again.

Applet does not load on app server when Free Design Layout

Hi,
I have to embed a an applet in a webpage of an web application. Before I go on to anything.. let me first tell you, I am using Netbeans 6.0
As shown in the tuorial:
[http://www.netbeans.org/kb/articles/tutorial-applets-40.html]
1. I first made the "Applet" source say HelloApplet. java. After compiling and running it I get the HelloApplet.jar.
2. I created a WebApplication and then from the properties -> packaging -> I "Add Project" HelloApplet.jar.
3. Then I a webpage I "embeded" the applet.
4. I run the web app and the applet gets loaded and everything is just fine.
But before I go on I must tell you that the applet was designed in Null Layout. Now I edited the applet source once again and changed the layout to Free Design Layout*. ( this is available from Netbeans..on the HelloApplet.java .. go to the design view.. right click on the form and from the context menu you can change the layout to FreeDesign or whatever you might want).
When I expand the "Libraries" node I see the that the library Swing Layout Extensions - swing-layout-1.0.3.jar has been added.
When I "run" the "HelloApplet.java" file, the applet is shown in the appletviewer. No problems with that.
But!
When I try to Clean & Build and Run the WebApplication, the applet does not get loaded. On inspecting the java console I see the following error:
java.lang.NoClassDefFoundError: org/jdesktop/layout/GroupLayout$Group
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: org.jdesktop.layout.GroupLayout$Group
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
... 10 moreIt clearly shows that the Free Design Layout has something to do with the GroupLayout which can be found by expanding the "Swing Layout Extensions - swing-layout-1.0.3.jar". Now when the HelloApplet.jar is created only the HelloApplet.class file gets included together with some other data but NOT the swing extensions. Hence when I run the web app the class file looks for the GroupLayout.class definition but can find it in the jar as its not included when the HelloApplet.jar is created.
But with null layout there isint a problem because null layout takes the definitions from the JRE on the machine.. and so it runs without a hitch.
My Question is : How can I run the applet with Free Design Layout? or is it possible to package the swing layout extensions in the HelloApplet.jar?<
Thanks for all your replies.
Cheers.
Edited by: arijit_datta on May 15, 2008 4:07 PM

Solved.
Here is the solution:
[http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html|http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html]
Cheers..
Edited by: arijit_datta on May 16, 2008 7:41 AM

ArchWiki: suggestion for a new page layout

Finally, I have some time to spare for ArchWiki improvement.
I have modified my article on CMYK support in The GIMP as an example.
Please take a look at it here:
http://wiki.archlinux.org/index.php/CMY … n_The_GIMP
The code to produce the box on the right is here:
{{sn|'''Article summary:'''
This article will show how to enable rudimentary CMYK support in The GIMP using the Separate plug-in, and explain how to use color proof filter to soft-proof your images.
It will also cover more general topics on CMYK colors and DTP.
'''Required software:'''
*[http://www.gimp.org/ The GIMP The GIMP]
*[http://www.littlecms.com/ lcms]
*[http://download.adobe.com/pub/adobe/iccprofiles/win/AdobeICCProfiles_end-user.zip Adobe ICC profiles]
*[http://www.blackfiveservices.co.uk/separate.shtml Separate plugin source]
'''Related article:'''
*[[Using lprof to profile monitors]]
This is the best we can do with current ArchWiki setup. It would be even better if we could list categories in the box, as well as i18n links.

A: ArchWiki: suggestion for a new page layout

dtw wrote:Doesn't display correctly in IE
I've been tinkering with the templates. It's fixed now, I think.
Anyway, the templates used for the job can be seen from the code:
{{Article summary start}}
{{Article summary text|This article will show how to enable rudimentary CMYK support in The GIMP using the Separate plug-in, and explain how to use color proof filter to soft-proof your images. It will also cover more general topics on CMYK colors and DTP.}}
{{Article summary heading|Translations}}
{{i18n_entry|Deutsch|CMYK support in The GIMP(Deutsch)}}
{{i18n_entry|English|CMYK support in The GIMP}}
{{i18n_entry|Español|CMYK support in The GIMP(Español)}}
{{i18n_entry|Finnish|CMYK support in The GIMP(Suomi)}}
{{i18n_entry|Français|CMYK support in The GIMP(Français)}}
{{i18n_entry|Nederlands|CMYK support in The GIMP(Nederlands)}}
{{Article summary heading|Required software}}
{{Article summary link|The GIMP (v2.0 and above)|http://www.gimp.org/}}
{{Article summary link|lcms (v1.15 ?)|http://www.littlecms.com/}}
{{Article summary link|Separate plugin (v0.10 and above ?)|http://www.blackfiveservices.co.uk/separate.shtml}}
{{Article summary heading|Related articles}}
{{Article summary wiki|Using lprof to profile monitors}}
{{Article summary end}}
As you can see, it's a bit more typing than before, but it sure looks better. I might shorten the names for the templates. I wanted to make them memorable so they are a bit long.
As you can see, the problem of i18n links integration was fixed, so you can use existing i18n template and combine with the new "Article summary" set.
I will modify the article about writing summaries to include those templates and examples.
EDIT: :oops: the i18n links in the article are just examples. Don't use them, since they lead to non-existing pages.
EDIT2: Okay, I've played around with the appearance of the summary box, but I'm at work now, so it's going nowhere. I'll play with it some more when I get home.

Missing Features in the new design preview

So today Microsoft officially unveiled the new design preview for Skype for Windows desktop that we have been able to test on a field trial basis or by manipulating the URL to download.
Apart from the new design, this new version also brings a change in philosophy regarding group conversations and a very impactful removal of features for them.
At first I want to talk about an issue that has been part of the mobile releases for a long time, the removal of names for group conversations. In the good old Skype world, every group conversation had two parts to display the members of a group and the context of conversation that was happening in them, the name and the topic. With the new design though, the option to name your groups is gone. This means that instead of showing a familiar, easy to remember and recognize name, the contact list now shows the topic, a often (maybe?) changing and not representing the members of said conversation, as the name.
My favorite example on why this is bad is the following: Let's say you have more than one group of friends (hey, it happens) on Skype to talk about different things. One is your football club and the others are the chess dudes. You obviously name those groups "The sports guys" and "The chess guys" for your own sanity and ease of use in identifying them in your list. Both groups often have a similar topic set, mostly the date of the next meeting.
Now, with the new design, you are left with two entries in your contact list, both conveniently named "Next meeting at 5pm". Now what? Which one is which? No way to know at a simple glance. You really have to open the group and look at the members list to really know.
As a person who has been using Skype for group conversations for years and years, this really grinds my gears and I have been trying to get the developers attentions in varius threads on this forums, for once in the Android section (http://community.skype.com/t5/Android/Wrong-behaviour-in-group-conversations/td-p/1968699) where this problem has existed for a looong time and over more private channels and app feedback.
Now the only time when you can change the name of a group is when you create it. While in a previous version of the design preview, the option was still called "Change name..." as it is in the Android version, the latest release now correctly shows "Change topic.." because that is what it does, good job! I'd still like to be able to change the name independently from the topic.
The next bug is minor and about group conversation pictures, in the new design, it's no longer possible to add pictures to the header of groups, they just don't show up when you add them also the existing ones don't show in the contact list.

Stanzilla wrote:Now the only time when you can change the name of a group is when you create it. While in a previous version of the design preview, the option was still called "Change name..." as it is in the Android version, the latest release now correctly shows "Change topic.." because that is what it does, good job! I'd still like to be able to change the name independently from the topic.
As I can't edit, I need to mention that I was kinda wrong about that, it reverts to showing the topic instead of the name in the contact list after a while, maybe after it syncs? Anyway, it still does it wrong.

Purchase order layout using Smartform

Hi All,
Can anyone let me know how to create Purchase order layout using smartforms and assigning it to output type.
Is there standard smartform for purchase order?

http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
http://www.sap-basis-abap.com/sapsf001.htm
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
http://www.esnips.com/doc/13b7ae7a-b32c-4b96-b588-881859d4ac99/Template,Table,Loop,Command-in-Smartforms.doc
http://www.esnips.com/doc/97acb00a-e513-4611-91f0-c626f460bfc5/Smart_Form_Overview.pdf
http://www.esnips.com/doc/77a981b9-8fe3-4fbb-8101-67745c1fe60c/SMART-FORMS_shail.ppt
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Try this. A simple sample Smart Form.
SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
SMARTFORMS GENERATION: (calling internal table fields)
 Open a smartform using the tcode smartforms.
 Usually form attributes shows admn data.
 In the form interface declare import/export parameters if any. Else declare the tables in tables tab button.
 In the windows and pages expand and create a table. It automatically generates header, main area and footer for the table.
 In data tab button in the table we usually declare a work area to bring the data from se38. Like: ktab into wa. ( The purpose of declaring the wa is , to get the data of the ktab in to header from the body area of the internal table).
 And in the tablepainter pushbutton in table we can have any no of line types. Depending on the requirement. ( for ex: If we want to devide a row in to 4 columns, we can devide it as 4,4,4,4cm as line type 1, And usually for the footer we dont need no of columns, So, we declare it as one column with 16cm measure with the name line type 2.). We can use these line types in the tables.
 In the header right click>>create>>tableline. It asks for line type. Select one line type which is appropriate.
 Like same create a row2 in main area using right click. If we select the line type 1, it automatically generates 4 cells. We can create text in each cell as per requirement.
 We can generate general attributes using general attributes tab button in the text. Or in the other way. We can switch on the field list on/off button from the application tool bar. It displays all the attributes in the left down corner of the screen. We can drag and drop the required fields in the general attributes tab button of the text.
 We continue the same procedure for all the texts. The texts should be displayed in the gray color. Then only it can collects the data from the abap editor fields.
 If it wont turns gray, we can check the fields in the editor by changing it to the line editor. The best thing is to drag the fields from the list, rather than declaring like &wa-matnr&
 In the footer also we create a line type and in that table line we create text.
SE38 PROGRAM(method I):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
data: FM_NAME TYPE RS38L_FNAM.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in
S_MATNR.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_MYFIRST_FORM2'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IN THE OTHER WAY(method II):
REPORT Z_CALLING_SMARTFORM2 .
tables: mara.
select-options: S_MATNR for MARA-MATNR.
DATA: kTAB LIKE MARA OCCURS 1 WITH HEADER LINE.
SELECT * FROM MARA INTO TABLE kTAB WHERE MATNR in S_MATNR.
CALL FUNCTION '/1BCDWB/SF00000199'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
ktab = ktab
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
In the method I we are calling the amartform dynamically using the function module 'SSF_FUNCTION_MODULE_NAME'.
Here we are exporting form name and importing fm_name.
So we need to declare the variable fm_name as
data: FM_NAME TYPE RS38L_FNAM.
We can have the type of the fm_name in the function module 'SSF_FUNCTION_MODULE_NAME' (in the export tab button).
Since we are passin the name of the Function module generated by the smart form in to the fm_name variable. We run the function module with the name fm_name, but not the FM generated by the smartform(like /1BCDWB/SF00000199)¬¬¬¬¬¬.
In the method II we directly call the smartform generated function module (i.e, /1BCDWB/SF00000199).
But the method I is recommended. In the method I, The fm_name is a variable we dont put it in the quotes while calling.
In the both methods we declare the internal table using the like option, but not begin of. end of. And in select statement we select *, But not individual fields.
EX2:
SMART FORM NAME: ZGITI_FORM1.
SE38:
REPORT Z_CALL_GIRI_FORM1 .
TABLES: VBRK.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE T1.
SELECT-OPTIONS: S_VBELN FOR VBRK-VBELN.
SELECTION-SCREEN END OF BLOCK B1.
*INITIALIZATION.
*T1 = 'SELECTION-CRIETERIA'.
DATA: BEGIN OF I_INVOICE OCCURS 1.
INCLUDE STRUCTURE ZSTR_INVOICE.
DATA: END OF I_INVOICE.
DATA: VAR1 LIKE VBRP-NETWR.
DATA: BEGIN OF I_ADDRESS OCCURS 1.
INCLUDE STRUCTURE ZSTR_ADDRESS.
DATA: END OF I_ADDRESS.
DATA: BEGIN OF I_ORDER OCCURS 1.
INCLUDE STRUCTURE ZSTR_ORDER.
DATA: END OF I_ORDER.
DATA: BEGIN OF I_ITEM OCCURS 1.
INCLUDE STRUCTURE ZSTR_ITEM.
DATA: END OF I_ITEM.
DATA: BEGIN OF I_VBFA OCCURS 1,
VBELV LIKE VBFA-VBELV,
VBELN LIKE VBFA-VBELN,
END OF I_VBFA.
SELECT KUNAG VBELN VKORG VTWEG SPART FROM VBRK INTO TABLE I_INVOICE
WHERE VBELN IN S_VBELN.
IF I_INVOICE[] IS NOT INITIAL.
SELECT KUNNR LAND1 NAME1 NAME2 ORT01 PSTLZ REGIO FROM
KNA1 INTO CORRESPONDING FIELDS OF TABLE I_ADDRESS FOR ALL ENTRIES IN
I_INVOICE WHERE KUNNR = I_INVOICE-KUNAG.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT VBELV VBELN FROM VBFA INTO TABLE I_VBFA FOR ALL ENTRIES IN
I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
IF I_VBFA[] IS NOT INITIAL.
SELECT VBELN BSTNK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE I_ORDER
FOR ALL ENTRIES IN I_VBFA WHERE VBELN = I_VBFA-VBELV.
ENDIF.
IF I_INVOICE[] IS NOT INITIAL.
SELECT POSNR MATNR ARKTX FKIMG NETWR FROM VBRP INTO TABLE I_ITEM FOR ALL
ENTRIES IN I_INVOICE WHERE VBELN = I_INVOICE-VBELN.
ENDIF.
LOOP AT I_ITEM.
AT LAST.
SUM.
VAR1 = I_ITEM-NETWR.
ENDAT.
ENDLOOP.
CALL FUNCTION '/1BCDWB/SF00000223'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
var = VAR1
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
tables
i_vbrk = I_INVOICE
i_vbak = I_ORDER
i_vbrp = I_ITEM
i_kna1 = I_ADDRESS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

NEW Design Layout Using Omnipotlet...?

Similar Messages

Maybe you are looking for