New DNG profiles not appearing in Lightroom
DNG profiles created with QPcalibration and Colorchecker Passport are not appearing in the Lightroom profile pulldown menu since I upgraded to Photoshop CC. HELP!
I have CC and new color profile are installed correctly for me, still.
What folder are the profiles being saved to? Are you viewing JPGs or RAWs?
On Windows 7/8 the profiles should be stored in a folder like:
C:\Users\(username)\AppData\Roaming\Adobe\CameraRaw\CameraProfiles or %APPDATA%\Adobe\CameraRaw\CameraProfiles
Similar Messages
-
New camera profile not "appearing" in ACR, but does in Lightroom
I recently created a camera profile for a Nikon D200, using an X-Rite Colorchecker chart photo and the Chart feature in the DNG Editor. I exported the camera profile. When I go to the Calibration tab in ACR 5.5, the new profile does not appear in the drop down list with the other camera profiles. However, when I go to the Develop module in Lightroom 2.5, the new profile does appear in the drop down list there.
I am running Windows 7. Snooping around my root drive I find that if I look within the Users\User Name\AppData\Roaming\Adobe\CameraRaw\CameraProfiles directory (referenced in the Fraser and Schewe CS4 Camera Raw book as the Vista location for the profiles) I can find no camera profiles and when I place the new profile there it still does not appear in ACR. When I look in ProgramData\Adobe\CameraRaw\CameraProfiles\Camera\Nikon D200 directory I can see the regular set of camera profiles for the camera, as well as the one I created, but as I previously stated, the newly created profile does not appear in the ACR list.
A side note - I did some experimentation with camera profile names. I added "XX" to the end of the Nikon Vivid profile name (not the extension), and then that profile no longer appears in the ACR list of profiles. I removed the extra letters and then the profile reappears in the ACR list of profiles. Seemed odd behavior to me. I also noticed that the profile I created with DNG Editor is noticeably smaller than the others provided by Adobe (28K compared to 110k).
Hope someone has a suggestion for me.Your reminder about both Photoshop (main) and Bridge needing to be shut down for changes to take effect reminded me that I had Bridge set to "auto-start at log-in". So I checked and it was still running (shown with the other hidden icons). When I "shut it down" from the UI I had thought it was fully terminated. So I completely shut Bridge down, restarted, and the new profile now appears.
Thanks for the reminder/pointer in the right direction. -
Lens profile not appearing in Lightroom
Hi folks,
I have installed Lightroom 5.4 from CC on Windows 8 and just ensured it is updated.
I am attempting to use a lens profile correction for a Sony E 35mm 2.8 lens (which should have been added in the Lightroom 5.3 update).
When I attempt to select the lens profile, the only lens I have showing under Sony is a DT 18-200mm.
Do I need to activate anything in order to get the Sony 35mm to show?
CheersThe lens profile is likely built in and always applied so there’s nothing to select; however, if you want to upload a raw file I can check in Photoshop, which actually tells you that it’s using a built-in profile, rather than leaving you wonder. Use http://www.dropbox.com and post a public download link, here, in a reply.
-
created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows
You are using an older version of firefox, upgrade your browser to Firefox 8 and try
* getfirefox.com -
In my iCal, "new reminder" does not appear in the menu under "File". How can I get reminders to show up on my iCal?
If you're running Mountain Lion (10.8.3), reminders is now a separate app. Launch reminders from your applications group and you will be able to access File>New Reminder.
-
After GL Year opening the months of new year are not appearing in open period window of Gl?
Hi All,
After GL Year opening the months of new year are not appearing in open period window of Gl? Am i missing any thing???
regards
Shahzad M. SaleemHave you checked GL setups
Setup accounting manager >
Query your OU >
Under setup steps click on Update for ledger
Under accounting calendar
Number of future enterable periods. -
TS1538 My the new ipad does not appear in itunes, Pls help
My ipad does not appear in Itunes to restore or back up data. Thestatus of my device are:
- updated the latest Itunes version 10.6 .
- tried to restart Apple Mobile Device in Window but it still doesn't work.
- Could not restore in DFU becasue the window doesn't recognize ipad. It appeared cable & itunes disk images but it itunes does not recognize.
- When i pluged the ipad in my laptop, window could not reconize ipad neither.
Please help to solve it!Let me summary what i have done in the last few days to try to fix the issue taht the new ipad does not appear on itunes 10.6 so that you guys can have an overview to help me :
- removed previous itunes together with Apple Mobile Device and Bonjours
- Reinstall latest version Itunes
- restart computer (for sure the problem not from laptop becasue my other new ipad and iphone4 stil work well with itunes)
- tried using recovery mode when the iPad is connected with computer and iTunes open; Keep the Powerbutton and the Homebutton pressed at the same time until see the Apple logo on iPad screen.Then wait for about 10 minutes (i repeat this step many times). Ipad is turned on but still not connect to itunes or no notice board appeared on itunes to start restore
- I changed the usb cable/port...nothing change
status of device is:
- battery is fully charged
- My laptop (window 7)
- All what i can get is the ipad is charged when i plug in laptop.
- no apple device is recognized on "my computer" window
- no images tab is pop up as usual to copy photo
Apple experts ...help me...pls... -
New Bookmarks are not appearing in bookmarks folder
New Bookmarks are not appearing in bookmarks folder. or appear in any folder I try to save them to.
Triple-click the line below on this page to select it:
~/Library/Safari/Bookmarks.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
New IR's not appearing in Views for non-admins
We are in pre-production testing for SM 2012 SP1. We only have a few user roles beside the built in roles. We have a 'standard' group
which has access to just about everything except for sensitive items relating to user termination, legal, etc. We have a group which can see those sensitive items, and then we the built in administrators. <o:p></o:p>
When non-admins create an IR or SR, it sometimes takes up to 5 minutes for the item to show up a custom “all open incidents”
view, or in a custom “my incidents” view. In a few isolated cases, the work item did not appear for over an hour. However, admins can see all of these work items immediately in any view that should, by criteria, be displaying it.<o:p></o:p>
What would cause a work item to display immediately in all appropriate views for admins, but not for non-admins?<o:p></o:p>Sorry for the delay in updating. Our management team got very frustrated with the performance and nearly killed the whole project. I got them to give SM another chance with R2, hoping that some of issues would be resolved. This issue was
not resolved.
So, I have continued testing. I cleaned up our Queues, so we only have 4 now in the Queues list. When I open the properties of the our custom user role, the Queue section displays our 4 queues, plus one called Work Item Group from the System
Work Item Library. I started with selecting just 1 Incident queue, for this user role. I created a new IR as this user, and it took nearly 15 minutes for the IR to appear in the view.
I then modified the user role and selected the "All work items can be accessed" radio button. I created another IR and it appeared in the view immediately. Now, this is where it gets interesting. I went back to the user role and set it
back to display a single queue, and the IR disappeared from the view. It didn't appear again for another 10 minutes.
The queue that is this IR should be assigned to is quite simple. Right now, I want it to display all incidents. It is not looking at an advanced class, just incident. Initially, I did not upt any criteria on it at all. I then tried
setting it to just Active Incidents, and still the IR's takes 10-15 minutes to appear.
I still don't understand what an aggressive queue is. Does my queue sound 'aggressive?' The view is looking at Incident (typical), not advanced. I don't see any obvious problems in the Workflow Status section of the Admin pane. What
should I be looking for next? I need to have the ability to filter queues by user roles, but it will cripple productivity if new IRs do not appear for 10-15 minutes. -
After editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4
after editing in photoshop cs6 my photoshop edited image does not appear in Lightroom 4 can anyone help?
In Library, set your sort order to Filename instead of Added order and see if the files show up, then.
How are you doing the Save in PS, using Save or Save As—one will show up, one won’t, I think, but I don’t remember which. -
Sorry new Imac does not appear to have a Mini dp
Sorry new Imac does not appear to have a Mini dp
The new iMacs also do not have a Firewire port so if you have firewire devices you will need a Thundbolt to FW adapter.
-
GPS data from my D-SLR does not appear in Lightroom 4 GPS data field
The gps data from my D-SLR camera does not appear in Lightroom 4 after importing the pictures
Gibson,
Well to be specific the camera model number and follow the manual to enable the same.
The GPS data is to be embded by the Camera istellf at the time when the pic was taken.
Please contact the OEM or tech support if you are not able to get the same.
Mandhir -
Lens Profiles not working in Lightroom 5.4?
I've got OSX 10.9.2, Lightroom 5.4, latest Camera raw, everything up to date.
When I "Enable Profile Corrections" for an image shot with a Sony a7r and Sony FE 55mm lens, it should automatically retrieve this profile:
/Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Sony/SONY (Sony FE 55mm F1.8 ZA) - RAW.lcp
Well, it doesn't. The only Sony lens available in Lightroom's Lens Correction panel is "Sony DT 18-200mm." But there are several dozen Sony lense profiles in the "Sony" directory.
And more puzzling, the camera "Make" menu lists 8 manufacturers (Apple, Canon, DJI, GoPro, Nikon, Sigma, Sony, Tamron) but leaves out a number of others — Fujifilm, Hasselblad, Leica, Mamiya, etc.
And as with Sony, only one Tamron lens is listed.
I've tried re-installing Lightroom fresh, and no luck.
Photoshop works fine and has all the lens profiles.
Anyone else noticing this? Got a fix?
Irked in Cambridge,
MikeI only shoot in RAW, and I am having this same issue. I shoot Nikon with a Tokina lens. This morning, Tuesday October 14, 2014, I had this setting. I closed the program and restarted it, and now I only have Apple, Canon, DJI, GoPro, Nikon, Sigma, Sony, Tamron lens profiles. There was not an update, nor did I actually change any settings. What is going on here?
I talked to customer support, whom suggested that I was stoned out of my mind because these profiles do not exist in lightroom. I did as the rep asked, followed the link and downloaded the "new" profile. Now I can't get it installed. Meanwhile, my photos are waiting for me to edit them. Can someone please help out here?! -
Lens Profiles not registering in Lightroom 4
I have a number of lens profiles that I have created with Adobe Lens Profile Creator and placed in the designated folder, but when I run Lightroom, they do not appear in the list.
There is an "index.dat" file under folder 1.0 that I suspect needs to be updated, but I don't know how.
I also added a Minolta folder since there was noe befor to place my Minolta lens profiles. This does not show either when I run Lightroom.Rikk is correct. User created lens profiles should be put under the user specific lens profiles folders.
On Mac, put them under (note there is no space in the "CameraRaw" sub-folder) or any of its sub directories:
Hard Drive>Users>your user name>Library>Application Support>Adobe>CameraRaw>Lens Profiles>1.0
On Windows,
C:\Users\your user name\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0
I thought ALPC will default to save to these user speficic locations. -
New Role does not appear in home page after assigned to a user
Hi there!
I'm new at SAP Portals.
I've created a role and assigned it to an user, but the corresponding tab does not appear in home page.
I've already changed permitions to a group that is assigned to the user.
I've seen in some posts that the role's property "Entry point" should have value "Yes", but mine is set to "No". Meanwhile, I can't change it. When I open the role and press button "Properties" nothing happens. The only way I can check role's properties is through "Delta Link tracer", but there I can't change them.
Can you help me, make the new tab (corresponding to role) happear in home page menu?
Thanks and best regards,
Vasco BrandãHi,
to track down you problem, you click on "properties", but you can't see the properties? They won't get loaded and therefor, you can't edit the property?
What's your portal version + SPS, which browser are you using + version (IE, FF) and how do you access the portal? IP, FQDN? Are you getting any error message in the browser?
What profile is assigned to your user? What kind of roles are you trying to modify? A new one, or a SAP pre-delivered portal role?
br,
Tobias
Maybe you are looking for
-
Concatenate out put of 2 or more columns in BEX Report in to one column
Hi, I am working on service order report in BEX, and i would like to Concatenate out put of 2 or more columns in BEX Report in to one column. Please share me if any scenarios. Thank Neni
-
Burning music CD gives unknown error 2605
When burning an audio/music CD is iTunes for Win, I get unknown error code 2605. iTunes diags report that the CD is OK and I am able to create a data CD\DVD within iTunes using the same playlist that will NOT burn a music CD. I am able to rip a music
-
Encryption/decryption through jar file and classes
Hi, My application uses tomcat as web server. I am doing encrytion and decyption. i fetch encypted data from database and then decrypt it If i use calsses in webapps -> WEB-INF -> classes folder, i place classes in that , In other case i use jar file
-
Ipod problems! backing up music
I just got a new ipod and I want to put all my songs from my old ipod onto my new one but I manually manage my ipod so it is connected to a pc and a laptop. I download songs onto my pc, connect my ipod to the pc and have to drag the songs i want into
-
Can I switch back and forth the same sim card between an old iPhone 4 and a new one never used in order to activate the latter? Should I use same Apple Account? Should I activate it via WiFi or iTunes? I am filtering on the MAC no and I cannot read t