New field in Additional data B

Hi everybody,
I would like to know how to add match box (date) behind new created field. I have created new field as DATS, but can´t find a way how to put date match box behind that field.
Thanks in advance

hi ,
     if u have created new field like y or z fields for date ,it should have the datatype as dats only then u can use this field as date relevent field.
else u can also assign any date related field's data element and domain to newly created field.
by doing either of this way, ur problem would be solved.
reward if helps !!!!!!!

Similar Messages

  • Add new fields in Additional data tab B in Inquiry,

    HI,
    I want  to add additional new fields in inquiry on the addition tab -B, like
    Architect Name
    Contractor name
    followed By
    referenced by  like this, and want to capture the report on these fields
    plz guide
    thanks in advace

    Dear Rishi,
    Please Don't post multiple threads for same issue(i.e Add new fields in Additional data tab B in Inquiry).
    Try with these User Exits,
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    I hope this will help you,
    Regards,
    Murali.

  • Add new fields to additional data tab in customs declaration

    Hello friends,
    My requirement is to add Z fields in the additional data tab in transaction /SAPSLL/CL_CUS_02 of GTS. I would also like to know If its possible to create a new tab all together in /SAPSLL/CL_CUS_02 where in we can add fields from a custom table.
    Thanks a lot in advance. Your help will be highly appreciated.
    Regards,
    Koustubh

    Hi Koustubh,
    As Dave pointed out, there is a BadI for extra tab on declaration Item and Header.
    There is an example implementation already available in the System. I believe that 1 BadI will no be enough for what you need.
    UI enhancement BadI uses standard CUHD and CUIT tables to store the extended data ( via table APPEND ), in order to save content to Z* table you will need a separate BaDI.
    Also, If you intend to use this extra data in outbound message / declaration Idoc, extra BadI has to be used and also the basic IDoc type will need to be extended with your Z* segment. Thats probably 2-3 BadIs working in tandem.
    Can you tell what is the purpose of the extra data / extra tab ?
    Best Regards,
    Branislav Petricek

  • Adding new fields to additional data B screen in sales transaction

    Hi All,
    I have a requirement like this I need to add 3 input fields and 1 push button(select oppurtunity) in additional data B screen of sales order transaction.If I click on this button I want geneate one pop up dialog box just like as search help box and I should be able to search data for these 3 fields data based on some 4 input fields data?How can I acheive this?I can add button and what I have to write the code in PBO and PAI of this screen?Please some body help me in this regard.
    Regards
    Mahesh

    Hi friend,
    In SAP we can add few fields from maintain reserve fields. Please go through it;
    Maintain Reserve Fields In Customer Master
    There are reserve fields in the customer master record which are not used in the standard system. They are available for use and are as follows:
    Customer group 1 (View: V_TVV1 Field:KVGR1)
    Customer group 2 (View: V_TVV2 Field:KVGR2)
    Customer group 3 (View: V_TVV3 Field:KVGR3)
    Customer group 4 (View: V_TVV4 Field:KVGR4)
    Customer group 5 (View: V_TVV5 Field:KVGR5)
    You can find the fields in the customer master record under the sales and distribution data in Sales. Choose additional data under Environment.
    It is advisable to change the field description (Data elements KVGR1 to KVGR5).
    This is described in the system modifications in the Reserve fields unit of the customer master record:
    Reserve Fields in Customer Master
    Record
    In this step you maintain the valid entries for the individual views.

  • Adding new field to Master Data

    Hi All,
    I have one master data which is business content.
    i need to add one custom field in that with the status information of records. that new field will get data from R/3 status table via extractor from CMOD.
    now this Master data is having delta.
    my confusion is if i add new field in it how the delta will react ? coz there are different status - eg. when user create the status - it will be "created" that time delta will pick up that record coz it has been changed. Now if user changes status to "closed" or "in transit" how delta will react ?
    i meant is it doable to do like that ?  any guidance will be appreciated.
    Thanks in advance.

    Smith,
    Your master data extractor will continue to give your existing fields- as for delta - it depends on how the delta is managed - you would have to find that oiut - is it on timestamp / date et etc... ?
    CMOD will change only the extract structure and whenever this datasource is called - CMOD fills in the additional field - nothin about delta / init here...
    Arun

  • How to add Fields in Additional Data B in VA01/VA02.PLease help me out.

    HI All,
    My requirement to add a Custom Screen in Va01/VA02 .Kindly suggest if any screen exists are there.
    How to Add extra fields in Additional Data B in header of VA01/VA02.is access key is neccessary for that.
    Thanks in  Advance.

    Hi
    Check the link
    http://techbays.com/2008/04/17/implicit-enhancement-in-sap-ecc-60/
    There is a BADI BADI_SD_V46H0001 and Method EXIT_SAPLV46H_003.
    You should be able to it without access keys.Consult your SD Functional Guy also
    Regards
    Sanil Bhandari

  • How to add new fields to a data extract

    The following data extract program generates an output file which is displayed using a publisher template as a check format report.
    Oracle Payments Funds Disbursement Payment Instruction Extract 1.0
    How would I add new fields to the generated file? In other words what is the procedure to add new fields to the data extract?
    Thanks

    Do anyone pls advise how to customize the payment extraction program? We also have the similar requirement to extract extra fields to format a payment file.

  • Long text for a field in Additional Data tab of DMS

    i have a field in additional data tab called Name , how can a long text be assigned to that field

    Hello Mr. Vijay,
    Classification Configuration master data which we need in Additional Data tab. Presently In our SAP system we have limitation for just 30 character for each characteristic if i correct just confirm me please
    Regards
    Arun kaul

  • New field Special posting date in GCU1

    Hi Friends,
    I am having a issue. my client wants to add a new field SPl posting date in GCU1. He wants to transfer some MM originating documents to Spl at this date instead of respective posting dates of those documents.
    Kindly advice how this can be done.
    Thanks in advance.
    Best Regards
    Bhairavi

    copy the standard program as Z program. add the field in selection-screen and for selection of data include logic for checking the newly added field.
    anya

  • Populated the new field with historic data

    HI,
    I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
    1)deleting all the data in BW side and the doing an init then setting up a regular delta
    2)running a repair full request with selection condition.
    or is there any other option available? which is the best scenario to load these historic data?
    Regards,
    Ravi

    Hi,
    I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
    1.Fix ECC down time for 20 to 30 munities
    2. Keep all objects on Qty system in ECC and BW.
    3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
    4. Move DS from ECC Qty to ECC PROD .
    5. Replicate in BW.
    6. Move all BW objects from BW Qty to BW Prod.
    7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
    8.Load Init without DataTransfer.
    9.Then Run Delta.
    10. Next day on wards deltas will come as usual.
    If you need Historical data also.
    1.Delete data in Cube.
    2.Fix Down Time and load Init then Delta.
    Check
    SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
    Thanks
    Reddy

  • VA01 creation of new feild in Additional data tab B and populating values

    Hi All ,
           I had created  a new field zzordqty in VA01 item level -> additional Data  Tab B  SE51 -> SAPMV45A-> 8459.
          The values while creating a sales order are coming from Inbound FM Idoc_input_orders .  for this particular field the value is stored in segment E1EDP35 when QUALZ is 011 the value of CUSADD is to be shown of the screen of VA01.
          For this I had tried to create a enhancement point in FM Idoc_input_orders , and tried to capture the value of CUSADD into XVAP-ZZORDQTY .
           But as soon as i come out of the enhancment point the value of XVBAP-ZZORDQTY BECOMES 0 .
           And at the screen level of SAPMV45A i had created a PBO and transfered the values from XVBAP TO VBAP .
            But since the values are getting cleared , the value of zzordqty is zero and also niether it s getting updated at table level .
            I request to let me know , how should i proceed further , either to use exists or badi's
    Thanks & Regards,
    Kavitha

    hi,
    you can do it in include MV45AOZZ. the method should be for module in PBO of subscreen 8459.
    and ifyou are not able to pass it to any standard structures( like xvap, or vbap or some thing like that) you can export it from PBO or PAI module) and catch it in the save exits (user exits)
    Edited by: Soumyaprakash Mishra on Oct 2, 2009 11:08 AM

  • How to reflect a new field in Bank data while making payment through F-53?

    Hello Experts,
    How can i reflect a new field (payment reference) in bank data while making payment through F-53?
    I have tried to do it by Field status group(OBC4) but the same is replicating in vendor invoice but not in vendor payment.
    I tried it at both level,fsg anf posting key,But no use.
    Is there any other process to make available and required field in BANK DATA of vendor payment?
    Please suggest .
    Regards,
    Sumeya offrin

    Hello Sumeya,
    Please consider note 145864 which explains what you have to do to
    make this field visible in your selection criteria:
    "In Transaction FB00 (Financial Accounting Editing Options -> Open items
    activate the flag 'Payment reference as selection criterion'.
    This is valid for incoming payment; please test if the same procedure
    is valid for outgoing payment as well.
    I  check the  issue, and unfortunately these function seems to not be supported for vendor open items.
    When you try to select the 'Payment Reference' in Additional selections
    the following messages is arised:
    'No account specified, items selected via document no. or reference'
    That means,when you do not specify an account in F-53 you can only
    via Reference and/or document. This is not a bug but system design.
    For additional reference you can check the note 451105.
    The note made clear that the specification of an account is required for vendors during the selection via payment
    reference.
    Kind Regards,
    Fernando Evangelista

  • Screen Exit for adding custom fields in Additional Data tab in ME21N

    I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
    I also need a similar exit for adding a filed at item level.
    Thanks in advance
    Martin

    Hello,
    1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
    please check it for VA02
    SPRO u2013 SAP Reference IMG ---  Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
    1)Screen group                                  description
            zs                                           creating badi      --- (save)
           click on (label tab pages) u2013 new entries
           number u2013 10 , function code u2013 zs10 ,  description u2013 func ---(save) u2013(back)
    2)select (FM_CUSTOMER_ADD) u2013 copy
         Implementation name u2013 ZAS
         (desc u2013 impl for cust) u2013 (save)
        interfaceu2014(check_add_on_active) double click on it
    3)the above screen appear --  write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
         -- (activate) u2013 (back)
       Business adds in customer sub screens
    4)select (FM_CUSTOMER_ADD) u2013 copy
         Implementation name u2013 ZAS1
         (description -- cust) u2013 in attribute u2013 (give screen group name)
    5)go to interfaces (GET_TAXI_SCREEN)  double click on it
       (save)  --- (activate) 
    6)(SAVE)  -- 
        Goto SE38  -- CREATE PROGRAM WITH NAME (ZQW) type module pool
         Goto SE51  -- Prog : ZQW
           Screen : 200 (Create)
          Goto layout u2013 design the screen
    7)save u2013 activate
       then goto transaction : va02
    For User Exit's
    goto to tcode->status->program name->double click on that,
    then goto to-> attribute take the package name and
    Goto SMOD tcode ->Utilities->give the package name and F8
    then a list of exits will display for that tcode as well as that package.
    u can check the table MODSAP
    u can check the table MODACT
    For BADI's,
    1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
    keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
    then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
    2)Goto to tcode->status->program name->double click on that program will display's
    then  press crtl+F then cl_exithandler
    Thank u ,
    santhosh

  • Add a New Field in CATS Data Entry Profile.

    Dear Team:
    Our requirement is when employees apply for overtime using Employee Self Service, there should be an option of choosing the Reason for the Overtime so that this becomes as a reference to the approver in decison. Please let me know the in which table is referred to for addition of a new field either from technical perspective or from functional point of view. Let me know the steps if possible.
    There is one HR Data Entry Profile.
    Also, let me know the Groupings: Settings, Worklist, Data Entry profile.
    Thanks and Regards
    Team Member.

    SAP has provided standard long text feild on the profile use that deild to enter the text no need of any additional customization.

  • Adding new fields to Item Data - PO (ME

    Hi All,
    Is it possible to add new custom fields to PO Item Data in Confirmations tab and these new fields are required only in PO Change (ME22N).
    How can we achieve this!
    Can anybody provide feasible solution for the same!
    can anybody tell me if this is possible!
    Thanks in advance.
    Thanks,
    Deep.

    Hi All,
    Thanks for the reply.
    Can anybody confirm BADI ME_GUI_PO_CUST will acheive desired functionality for above posted issue!
    Functionality: Adding new custom fields to confirmation tab. During Inbound delivery in confirmation tab (Item data) if 'Confirmation category' is selected then the new custom fields should show up below for input & they can be saved.
    if 'Confirmation category' is not selected then new custom fields should be invisible.
    Thanks,
    Deep.
    Edited by: Deep on Jul 24, 2009 4:49 AM
    Edited by: Deep on Jul 24, 2009 5:05 AM

Maybe you are looking for