New Grid 11.1 Install and agent download job

I have run into a odd situation. I have new 11.1 grid install on linux x86_64. It is working fine that I can tell. I went to the deployment and submit a download job to download the agent software I need from oracle support... I can see the job running from OEM without any issue as long as I stay on the job page. If I navigate away from the page and return I can no longer see the job running. I search for ALL jobs and it doesn't show. I know its running because I can see the directory .../oms11g/sysman/agent_download/11.1.0.1.0 directory getting larger with job I have submitted.
Has anyone run into this before? I'm concerned with having issues with job visability. Not really concerned about download the agent. Thanks

Tried that as well. Didn't show anything. The jobs did run to completion. I just could see them after navigating away from the first time. I even submitted one and cancelled it but it didn't show after I left the screen. The cancalled job still ran to completion.

Similar Messages

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabl

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabled. I don't know if it's talking about a new version of iOS on my iphone or my laptop. You people sure like to make things difficult.

trevbeats,
I had the same problem. It turned out the issue for me was that I had Automatic downloads turned off on my devices!
see below how to turn it on.
Tap Settings > iTunes & App Stores on your device.
Tap Sign In if you're not already signed in to the iTunes Store.
Enter your Apple ID and password.
Tap On/Off switch to enable or disable Automatic Downloads for each content type.

Installing and Unistalling downloaded programs

Hi, I'm new to mac and don't know where to begin when it comes to installing and unistalling downloaded programs correctly. Please help. Many thanks.

Hi, carpi.
Installing applications
Generally, packaged commercial software is distributed on CDs or via downloads and includes installation instructions that should be readily obvious.
Many of the shareware and freeware applications you will download are distributed in disk images, files with the .dmg extension. A disk image is a virtual hard drive in a single file.
Double-clicking the .dmg file mounts the disk image, like mounting a drive, and opens a new Finder window showing its contents.
On your desktop, an unmounted disk image appears as follows:
Whereas a mounted disk image might look like this:
If you download a disk image containing an application, double-click the disk image file, then examine the Finder window that opens. Usually it will contain:• A "Read Me" file that tells you how to install the app, uninstall the app, get support, etc. If there's a "Read Me" or "Read Me First" document, be sure to read that first.
• One of the following:• The application, as a single icon. This is known as a bundle. It contains all the files associated with the application in a folder that is also the application's icon. One drags-and-drops these to the Macintosh HD > Applications folder to install the app and make it available to all user accounts on your Macv. If you want the application available to only your account, drag-and-drop it to your Home > Applications folder. If you do not have a Home > Applications folder, simply create such a folder.
• An installer package for the application. If it uses the Mac OS X Installer, the installer package looks like a cardboard box containing objects. One double-clicks normally this to install the application.• Other files the developer decided to include, sometimes icon that are actually hyperlinks to their Web site, etc.After you've installed the application, you can eject the mounted disk image by any of the following means:• Dragging its icon to the Trash. This ejects the mounted disk image: it does not Trash it.
• Control-click the mounted disk image's icon and select Eject from the resulting contextual menu.
• Click the Eject button next to the mounted disk image's icon in the Finder's Sidebar.
• Launch Disk Utility (in the Applications > Utilities folder), select the mounted disk image in the left column, then click Eject on the Disk Utility toolbar.After you have ejected the mounted disk image, you can trash the unmounted disk image, i.e. the .dmg file you downloaded.
You can learn more about disk images by reviewing these files from Mac Help (Finder > Help > Mac Help) and Disk Utility Help.
Uninstalling Applications
See my "Uninstalling applications" FAQ for important advice on uninstalling software.
Learning more...
You wrote: "I'm new to mac"Since you've "new to Mac," my "Learning About Mac OS X" FAQ has a number of resources that you will find helpful including books, online trainging, and more. Educating yourself about Mac OS X will significantly speed your transition from Windows and is easier than the "trial and error" method.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

HELP I just bought a new dell quad core 5i and HAVE DOWNLOADED THE TRIAL VERSION OF PHOTO SHOP - its Slow to open up a small file and equally as slow to print why?

Use Photoshop menu Help>system Info... use its copy button and paste that info in an append here.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

HT4463 I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours. What's the problem? How can i fix?

I purchased Aperture then it installed and the download bar has been about halfway for more than 8 hours. What's the problem? How can i fix?

Mac App Store: How to resume interrupted downloads
http://support.apple.com/kb/HT4485

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed. The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?

Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad.

I bought a new mac with software installed and my username will not update from another account?

I recently bought an new power mac with Logic Pro and Final Cut Pro Installed.
When I updated to the new OS X operating system, they need to be updated as well. And will no longer work.
But it says it is on another account. Not sure what account. How do I find out what account they are on? How or can I do I move them into my other account?
The Power Mac is registered to the account I am logged in on.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

New iMac connected My Book and it downloaded. Cannot find the files

I bought a new IMAC and connected external drive My Book with almost 2T and it downloaded. It has taken up all disk space and I cannot find it.

If it shows as 'downloaded' in the Purchased tabs in the iBooks app then it should show on the bookshelf in the app. If you select the My Books tab in the app (bottom left) and then tap the 'collection' name at the top middle of the bookshelf and select the 'All' collection does it then show on the bookshelf ?

New GPU Quadro k5200 installed and having problem with my AE, PPro CS6 not using the GPUs cuda.

Hi guys, I recently bought a workstation from BOXX tech with a new GPU Quadro k5200 installed in it.
I am having problem with my AE, PPro CS6 using the GPUs cuda.
I went to Nvidia Settings and use the specific App to select it to use GPU n- Quadro k5200. But still not working.
Please help

If you edited the Cudatextfile in the Adobe Premiere CS6 directory correctly then the acceleration should be enabled. The only way it it's not is if you have the wrong driver for that version of Adobe or did not edit the text file with the exact name of the card. You can use the GPUsniffer in that same Premiere directoy with the command prompt to see the name the GPU should be listed as. The Ray Tracer file in AE has to be edited with the same listing.
Eric
ADK

Office 2013 Startup Problem with NEW Win 8.1 Install and no prior Office Version

Although I have seen similar threads on the forum, they all seem to address a different scenario.
My environment is as follows:
Intel MotherBoard with I07 max processor
64GB RAM
512 GB SSD Boot drive on which Windows 8.1 was installed as first and only O/S. It was validated
4TB HDD on which User directory and programs installed (those which permit drive selection in startup)
4TB data drive.
Machine was built from scratch with Win 8.1 Pro plus Media Center
Office 2013 Pro Plus was installed and validated
Machine is running in an MS AD Domain whose PDC is running on Win Server 2008 R2
User is a member of Enterpise and Domain Admin group
HERE'S THE PROBLEM,
Any Office 2013 Pro Plus application (Not Just Oulook) goes through the configuration step EACH time it is launched.

Hi,
Try repairing Office in Control Panel -> Programs and Features, check the result.
You can also try this:
Go to the install folder, such as C:\Program Files\Microsoft Office 15\root\office15, find the .exe file for the application, let's take Word for example, WINWORD.EXE, right click on it, send the shortcut to Desktop, right click the
shortcut -> Properties -> Shortcut -> Advanced -> Check "Run as administrator" -> OK -> OK.
Start Word from the shortcut, you may need to go through the process again, reboot the computer, check if it will show up again when you start Word. If the problem doesn't exist any more, do the same to other Office applications.
Regards,
Melon Chen
TechNet Community Support

Apple iBook App Frozen While Installing and Has Downloaded 2 Times?!

On my new iPhone 4S, I started downloading apps from my previous iPhone 3GS. When I got to iBooks, it downloaded it two times (two icons) and got a full blue installing bar, but wouldn't finish! It won't delete either. Does anyone know of a quick way to help this? I only got this phone a few days ago and I'm already disappointed that something already went wrong. :/ Thank you!

Download the app to the iTunes library on your computer and sync your phone.

My iPod classic 7th Gen will not sync with my new computer. itunes is installed and updated.

fellow iPod classic owners,
                                       the problem is a failure to sync with the new computer. the conditions are as follows: the new computer is a pc. it has the latest iTunes software installed. the iPod is installed properly. i'm fully recognized by my iTunes account. there is nothing lacking other than my iPod's refusal to sync with my new computer. what have i left undone? i could be suffering from a duh, but i'm not the only one. nothing in the apple world is as difficult as this one is, at least on the surface. if it were that simple an issue, no one would be having any problems with it. any more information needed can be provided by request. by the way, the computer being used has been authorized. that is a non-issue.
                                                                                                             your help is appreciated,
                                                                                                                 hardphil.

I believe the IPOD (Classic) uses USB 2.0, and my new laptop uses USB 3.0. I think they are not compatable because of this. If you find a solution to this please let me know.
Thanks,

I am using new laptop with ipod touch and have downloaded i.tunes. in the past i.tunes showed all the tracks on my old i.pod. I can't seem to find the i.touch library to change or delete music. What am I not doing?

I am using a new laptop, windows 7, with ipod touch, hoping to listen to, whilst on line, edit and add music to my ipod library. I have downloaded i.tunes but it does not show my library. I know I have repeats to delete too but cant see anything, It does recognise that there is a body of music with the indication bar at the bottom., but does not list anything. Help

I attempted to back up my old iPod, but in File - Library - back up to disk, it's asking for 15 disks! I can't just back up to the PC/ext HDD that I can see.
That backing up your iTunes library, not your iPod. You can backup up your library by:
iTunes: Back up your iTunes library by copying to an external hard drive
First you have to get Itunes to see the iPod. See the following. Notupdating your iPod iOS has nothing to do with it.
iOS: Device not recognized in iTunes for Windows
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
You can transfer iTune spurchases from the iPod to the computer by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
You can also redownload iTunes purchases by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer.
For other music yo will need a thrid-party progtam like one of those discussed here:
newer copy

New itunes won't install and I can't install older versions

Hi all,
I just downloaded the newest version of itunes this morning (I guess it's a newer itunes 11). The installation would not work, and I cannot seem to try it again. I've tried downloading the files from itunes, but it won't download. I've also tried going back to itunes 10, but I get the error: The file "itunes library.itl" cannot be read because it was created by newer version of itunes"
Any suggestions are greatly appreciated.
Thanks,

i'm using a Mac OS X version 10.5.7
Then update to 10.5.8 and download Safari 4.0.4.

My IPhone used to be synced to my computer. A new hard drive was installed and now the phone says it's syncing, then a message appears saying the next time my computer is available is will sync. I've followed the instructions and no success.

My hard drive burned up and had to be replaced. When I tried to sync my IPhone after my computer repair, the phone says it's syncing and the icons spin, but nothing happens. In a few seconds a message appears saying it will sync the next time my computer is available. I have gone through the instructions and procedures for syncing four times and can not get the thing to sync. Apparently the phone hasn't synced in a long time. What do I do to sync my phone again?

jrmetzger,
iOS runs on iPads and iPhones; OS X runs on Macs.
Given your situation, I’d highly recommended that you purchase a SATA-to-USB adapter, so that you can test both your old disk and your new disk externally, since it might be that the problem is due to a faulty internal SATA cable rather than due to faulty disks.

New Grid 11.1 Install and agent download job

Similar Messages

Maybe you are looking for