New iMac will not boot, even from disk and in Safe Mode

I'm stuck on the grey spinny screen.
Here's what happened:
I tried to share my Macintosh HD on my network, then, when it was finished, a whole bunch of errors popped up saying that I would have to reinstall. So I restarted, now it chimes and boots to the grey screen and is stuck there. I tried to boot from the CD, but it didn't work, I also tried to use the reinstall disk which didn't work either.

MashedPotato wrote:
Thanks for the help, All I had to do was fix the disk permissions.
I wasn't waiting long enough for it to boot from the disk.
Your welcome and thanks for the star. Yes it take longer to boot because discs are not as quick as disks.

Similar Messages

My iMac will not boot past the logo and spinning gear

My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
That article states:
Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
Would I see the recovery menu (by holding down option on power up)
Yes.
if there was no recovery disc connected do you think?
Shouldn't matter, since your int HD is always connected.

After installing 10.6.8 will not boot even from 10.6 disk HELP

Will only start in safe mode, Safari crashes so no help there to get back to 10.6.7 and will not boot from my 10.6 SL disk. HELP! Can't find the orignal disks so I am in a bad way...

Call AppleCare and request replacement discs. You can also Zap the PRAM and Reset the SMC and see if those will fix things up. You updated to 10.6.8 w/o having a bootable backup/clone or Time Machine backup? Bad move, that.

Brand new iMac will not boot, just make's funny "bonk" sound.

I have a brand new iMac (Intel, 20-inch flat panel). Just out of the box. Ran through set-up wizard. Used firewire to transfer files from an old CRT iMac. All was good for about an hour.
Tried to empty the trash. Finder says Trash was emptied, but, if I open the Trash, the 50-odd files I just deleted are still visible! If I try to select one, its icon immediately disappears. Hmmm....
I decide it's time to restart.
Upon restart, computer will not boot.
I push the power button. I hear the startup chime as usual. Screen lights up gray. But no apple logo on the screen. There is a long pause. Screen remains gray. Computer then starts making a soft "bonk" sound every 4-5 seconds. (Kind of hard to describe the sound, just imagine clipping the very first fraction of a second of the normal Mac startup chime, and repeating it every couple seconds.) This continues indefinitely.
If someone has experienced this, or has advice, please let me know your thoughts. Feeling rather bummed. Thanks in advance!!!
iMac Intel 20-inch 2.16 GHz Mac OS X (10.4.8)

Boot from the Install Disk 1
I cannot boot at all (see my post above). The
machine just sits there with a blank gray screen.
I appreciate the article link, though. I've already
read it and it will make a great reference for the
future, provided I can get back to a place where this
iMac actually runs.
Since you're new to Macs, I'm sure you don't realize that while your iMac is sitting there with only a gray screen, you can insert/push in "Install Disc 1" - and it will be accepted. Then press and hold down the power button until iMac shuts down. After waiting a few seconds until everything has settled, press power button and immediately upon hearing the usual Mac startup tone/chime/chord hold down the "c" key until you see the spinning progress indicator below the Apple logo. It will boot to the DVD, you will be able to use (from the Utilties pull-down menu) Disk Utility to "repair" the hard drive directory, then you will be able to quit the installation process, choose Startup Disk from that same Utilities pull-down, and restart your iMac:)

My new imac will not boot up.

I purchased a new imac 2.15" I7 processor and it has been working fine until today. It will not boot up. The background is white and the boot symbol just spins and spins. Powered the system off and back on and didn't work. Also unplugged waited for a minute and tried again. Same result. What should I do?

Try holding the shift key while booting. This is booting into safe mode. The computer will boot using only the necessary Apple kernal extensions. If it boots up in safe mode it may be that additional software you installed is the culprit.

Firefox will not open even after update or in safe mode using windows button + R

Tried solitions given on site using IE. Firefox will not start at all, did latest update and tried safe mode start.
Only get box stating it has encounterd a problem and crashed. I only use firefox and have so many bookmarks I really don't want to uninstall and start over.

We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

My iMac will not boot up from the Leopard upgrade disk nor will it eject it.

My iMac is very slow and sluggish. Followed online instructions to use the Disk Utility to run repair. After doing so it told to reboot my system from the install disk and then run the Disk Uitility to run repair from it. I put in my Leopard upgrade disk and tried to reboot. I get the chime and the Apple logo and hear the disk trying to be read, but after about 5 minutes my iMac shuts completely off. I have tried to eject the disk using all the methods found in the community and nothing works. I want to try my orignal Mac OS X install disk to see if that works. My computer is about a 2007 model. It worked great until just a couple days ago. Frankly I can't afford to take it in so I will have to figure this out on my own with your help. :-(

I cannot open terminal. When booting I get the gray screen with the Apple logo and the twirling comb goes for a while and shut the computer completely off.
I got into the single-mode user and learned the following: disk1s3: I/O error. SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
Singleuser boot -- fsck not done
Root device is mounted read-only.
If you want to make modifcations to files: /sbin/fsck -fy
/sbin/mount -uw /
I typed in the drutil eject and got:
SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
Library not loaded. Reason: not suiteable image found.
It did find:
/system/library/rivateframeworks/installserver.framwork/versions/a/installserver : unknown file type, firfst eight bytes: 0xCA 0xfe 0xba 0xbe 0x00 0x00 0x00 0x04 Trace/BPT trap.
I have tried holding the left mouse key, the eject key and nothing happens. To bad I can't pull the
thing out with tweezers.
So where do I go from here?

Tiger on a G5 will not boot even from the CD after PS failure

While the G5 was running, it has a abrupt power supply failure. Since it was just out of extended warranty, I bought a power supply and installed it. After pressing the power button, it only gets as far as the gray screen with the Apple logo. After a minute, the fans start on high. Trying to start on the CD, both Apple and Techtools, and the same happens. Safe mode and single user has the same effect, just to the gray screen with the Apple logo.
But when Command, Option, Shift, and Delete are held down, the screen tries to start with some text and then shows the "must restart" box similar to a kernel panic.
I can run the hardware test and the hardware checks out fine.
I tried unplugging the HD, re-setting teh PMU (if I did it correctly), and safe start. All with the same results.
Any ideas?
Thanks for looking.

This may be too little, too late for you, though I hope it's helpful, but maybe someone perusing this discussion might benefit:
My problem has been slightly different; my computer, after a few months of perfect operation has started to suddenly shut down.
No one has yet mentioned in this discussion that certain G5s have a hardware problem that Apple will fix for free. See:
http://www.apple.com/support/imac/repairextensionprogram/
and
http://www.apple.com/support/imac/powersupply/repairextension/
My G5 apparently qualifies for this repair. Now to see if my Italian dealer will honor it . . .
I HAVE POSTED THIS ELSEWHERE FOR PEOPLE WITH SIMILAR PROBLEMS
CIAO!

IMac 27 inch i7 OSX Lion will not boot up from Hard Disc

iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine. Restart and everything is fine. I have two machine and they behave the same. Software or hardware problem?

First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
If that fails, reboot it while holding down the command-key and the R-key.
If that fails, please reply to this and let me know.

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

IMac will not boot up when printer is plugged in USB

After buying my new iMac (with Tiger) I successfully transfered everything from my old iMac (with Panther) and all was well.
The problem is that when my printer (Canon Pixma MP130) is plugged in on start up, the iMac will not boot up (no gears turning on the white/grey screen). When I unplug the printer from the USB and start it up, it works fine. Its not a super big deal because I can just plug the printer in when I need it. But why does it do this?
I foound on the internet someone else who had the same issues. It was suggested to him to search the printer manufacturers website for updated drivers. I did this, installed them etc..... still no luck.
I am without any mac guru's here in Yellowknife......help!
Angie

Hello there,
I hope it is OK to recycle this old thread.  I did not want to create a new one since I am experiencing the exact same issue as the original poster *flying girl* as well as other posters in the following threads:
http://discussions.apple.com/thread.jspa?messageID=4190807
http://discussions.apple.com/thread.jspa?messageID=3950255
http://discussions.apple.com/thread.jspa?messageID=4201169
http://discussions.apple.com/thread.jspa?messageID=4490899&#4490899
http://discussions.apple.com/thread.jspa?messageID=4470944
I have two Macs, a PowerBook G4 and an Intel iMac 20" (Aluminum)--please refer to my signature or profile for the specs of these machines.  Of course, I got the PowerBook before I got the iMac.  I am running the latest version of the Canon MP130 drivers, printer drivers version 4.8.3 and scanner drivers version 12.11.0, on both machines.
When I turn on my PowerBook with the Canon PIXMA MP130 multifunction turned ON and connected via USB to the PowerBook, the PowerBook boots up just fine.  I have even experimented with both a USB hub and a direct connection to the Canon MP130, and the PowerBook boots fine in both instances.
However, when I turn on my iMac with the Canon MP130 turned ON and connected via USB to the iMac, the startup tone plays, and then the iMac hangs at the blue/gray solid screen--it does not even show the Apple logo or the spokes--that is, until I turn the Canon MP130 OFF.  When I turn it off, the Apple logo appears, the spokes move, and my iMac boots up just fine.  And as long as the MP130 is OFF, I can boot the iMac fine from scratch too.
I tried starting in verbose mode (⌘V) and single-user mode (⌘S), and the gray/blue screen still appears after the startup tone plays; again, if I turn the Canon MP130 OFF, the rest of the boot sequence resumes as normal, and only then do I get to see the descriptive text for those startup modes.  But the text goes by so fast that I miss most of it--I did manage to catch something that said something like "get full config descriptor = NULL," but I am not sure if that was the exact wording.  I would need a good camcorder or even just a digital camera or another device to capture exactly what the screen says in verbose mode.  If I had those options, I would post pictures here.
I was thinking about contacting Canon, but since the issue happens on one Mac only, I figured they would tell me that it is a problem with my Mac.  So hopefully posting the information here is OK.
Another key feature is that the Canon MP130 has a built-in card reader.  I made sure that my Startup Disk preferences were set to boot from the system drive, and they still are.  And I have reset the SMC and PRAM on the iMac.
I would like to mention the following link:
http://www.ehmac.ca/anything-mac/50389-intel-imac-wont-boot-when-canon-printer-p lugged.html
If you go to page 2 on that above thread, it shows one user who allegedly physically disconnected the card reader connection from the inside of the Canon MP130 (I would NOT recommend that myself).  I just wonder if there is a more feasible resolution to this issue.
Does anyone else experience the same issue with other printers or multifunctions?  Also, why does the issue occur only on my Intel iMac 20" (aluminum), and NOT on my PowerBook G4?
Please let us know about your experience as it seems many of us are at a loss for a solution.
Thank you very much for your help; we await!  :)
Cya!
\m/ Mad Metal Mage \m/

Imac will not boot past Apple Logo

My imac will not boot after the good chime and apple logo (i don't even get a spinning wheel). I have held the option key down and selected the OS 10.6 disk with the same result. I was able to erase the drive and reinstall OS 10.6 using target mode and another computer. In target mode I can boot the other computer from the IMac HD but not the IMac. Have also tried holding the shift key and booting into safe mode with the same result. Additional note: I reset the PRAM and the SMU. At first on PRAM reset it would take 45 seconds for the machine to chime again, after OS reinstall and SMU reset, PRAM reset chimes within 10 seconds.... any help would be appreciated...

Kind of late but your solution helped me remember what once worked for me, a few years back.
Started iMAC in Target mode Used a firewire cable to a MacBook Pro
Started the Macbook Pro using the option Key and then restarted with the iMac as the Hard drive
Then I updated to 10.6.8 and allof the other updates.
shut down and rebooted and everything was fine.
But first I did quite a few other things before the update such as
It all started with a DiskWarrior finding overlapped files, I have been around the block a time or two so after it found three overlapped files, I shut down diskwarrior started up disk utility did a restore of the messed up drive to another external drive,
of course this copied overlapped files and all to the new external drive It took 24 huors or so, to back up the drive once it was done, I also tried a few times to correct the overlapped files to no avail,
so then I started the iMac up in target mode used the MacBook to format and erase the original drive, used the 10.6.3 DVD installer to install onto the hard drive, using the macBook DVD. After I was finished with the install to the iMAC,,,,,,,,,,this is where I got the three beeps like bad ram So idid the PRAM and SMC to no avail.
The operating system was evidently not new enough so once I did what i said at the begining of this post all went well.
Sometimes It is tough to remember some of the stuff that you learned several years ago.
and tired hard to forget.
I hoped this post does not scare away to many people, I was just about done with this computer until I read your post, one of several dozen, and it all came back to me.
Thanks a Bunch
I hope this can help others
themacprofessor

My iMac will not boot through Snow Leopard but will boot through Windows OS

My 2010 iMac will not boot in Snow Leopard, only Windows. Have tried reinstalling Snow leopard a few times and works only for a couple of minutes before freezing and doesnt reboot. Windows works perfect. Snow leopard just doesnt want to boot up past the Apple Logo. It was working fine one day and the next day it froze up and was able to reboot back into Snow Leopard but kept freezing. Now it doesnt load at all into Mac OS.
Brian

Possible scenarios:
1: The 10.6.3 SL retail disk is bad, it happens.
2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
3: Your optical drive is funky or some other hardware issues.
4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
Possible solutions.
1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
2: Make a SL bootable USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

IMac will not boot up. Need to transfer data iMac (2006) iMac (2009)

I have an iMac (built/sold late 2006 -400 Firewire) and an iMac (built/sold late 2009 - 800 Firewire).
I have connected computers with a 400 to 800 Firewire cable.
The old iMac will not boot to desktop. It was suggested to hold down the "T" key and then power up the iMac. This was done and the old iMac shows a "Y" shaped icon that appears to be a Firewire icon. The old iMac does not show up on the desktop of the new iMac.
I would like to transfer data from the old iMac to the newer one. Suggestions ?
Thanks.
old iMac OS 10.4.xx
new iMac OS 10.9.2

She's holding T down on the old computer.
Which is the way it has to be done. The old computer's hard drive will mount on the new computer.
To use FireWire target disk mode
Make sure that the target computer is turned off.
If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
Press the target computer's power button to turn it off.
Unplug the FireWire cable.
(my emphasis).
Excerpt from: http://support.apple.com/kb/ht1661
The terms are Target and Host. The old iMac is the Target, the new one is the Host.

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

New iMac will not boot, even from disk and in Safe Mode

Similar Messages

Maybe you are looking for