New mac Mini 2011/lion Windows 7 black screen at installation

Hi,
I'm switching to Mac and finally got the new mini i5 2.5Ghz and I'm trying to install W7 professional.
I'm using an external USB dvd r/w unit (a samsung)
In bootcamp i was able to create the driver disk and repartition the existing hard drive in two halfs of 256GB each
But when bootcamp assistant restarts the mini in order to boot from the windows installation disc, I just get a black screen and the W7 installer does not boot,
At that point neither the 32 nor the 64 bit version of W7 boots. The screen simply remains black.
I can boot from the os x partition (keeping the option key pressed unitl the boot disk selection cames out), and Lion works, but any attempt to boot from the dvdrom with w7 fails.
Anyone else encountered this issue and can help ?
Thanks!
--sav

Go to http://support.amd.com/us/kbarticles/Pages/Catalyst118DriverPreview.aspx
and install the ATI 11.8 preview drivers.
Once installed, open the catalyst Control center (you should have a red icon in the notification tray)
and in one of the settings there is an "overscan" setting.
you should see a slider, position it to "0%" and you should have full screen.
For some reason the overscan defautl setting is set at -15%, hence the black bars.
I spent quite a lot of time on this, mainly because the bootcamp ATI drivers did not have any setting page I could find. I then installedd the official 11.7 drivers, but I could not get the Catalist Control Center to show up, not sure why.
Finally after reading forums for hours I gave the 11.8 a try, as it seems thare are some improvements (but mostly performances) for the HD 6xxx graphics cards, then finally it worked and i could access the overscan settings.
You may want to try first to see if you have the overscan setting before installing any new drivers.
Hope this helps
--sav

Similar Messages

  • Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

    Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

    Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
    The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
    For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
    If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

  • Just got a new Mac Mini with Lion - where is the downloads folder in the Window tab that is at the top of the page in Safari?  I used this a lot and really miss it!

    I just got a new Mac Mini with Lion - the Window tab at the top of the Safari Browser used to ahve a downloads folder in it along with Activity etc - but it is not there anymore. Any way to get it back or is there another location it sits in?  I used it when I'd copy video info from the activity folder and then paste into the download folder and presto - I downloaded the video onto my computer.  I really miss this capability!

    Download activity is found by clicking on the gadget on the right:

  • I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    http://www.apple.com/osx/uptodate/

  • I recently purchased new Mac Mini with Lion installed. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini.

    I recently purchased a new Mac Mini with Lion installed. I downloaded the latest version of iTunes. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini. Everything else syncs great, and iCal syncs from my Mini to my Touch. My Touch has the latest iOS installed. I have tried rebooting my Touch, removing the sync calendars option from iTunes>Info and checking it again after applying and closing iTunes, and restarting my Mini. Any help will be appreciated!

    Ongoing thread with the same question https://discussions.apple.com/thread/3209335?tstart=0
    Stefan

  • Problems installing OSX Lion - new Mac Mini 2011

    Hi!
    I'm having major problem with my brand new Mac Mini.
    I wanted to upgrade it right away after reading so many succeful upgrading reports on various forums so I bought a 120GB Intel 320 SSD disk and 2x4 GB of Kingston 1333mhz ram. I swapped the drives right away and idiotically used to original drive in a case to create an external installation USB-drive (my 4GB USB drives didn't work).
    I then created a bootable USB-disk with the external original drive and tried to install but only get the circle with slash after selecting the drive in the "options" menu. If I remove the USB-drive I get a flashing folder icon. If start holding down Command + S I get a message saying that the "version of OSX is not supported on this platform".
    I also tried using the Recovery Assistant HD to create a bootable recovery tool but that gives the same results.
    In short:
    I can't install OSX Lion on a brand new Mac Mini with upgraded HD and Ram. I don't have the original installation anymore.
    Am I out of luck?

    Internet Recovery solved this problem. Option+Command+R.

  • New Mac Mini with Lion Video Problem With Dell E228WFP monitor

    Just purchased a new mini Mac 2.3 with Lion pre installed.  I connected to my old Dell E228WFPI monitor via the Mini Display to VGA adapter.  The mini mac worked fine for an hour until I put it to sleep.  It would not rewake.  After rebute the gray screen and apple logo appear with clock, but after clock screen to black and monitor goes to power saver mode.  Took unit to apple store twice and could not resolve problem by changing resolution or other methiods.  Finally, we learned that the system works fine using Belkin HDMI to DVI cable.  This Dell Monitor had DVI connector.  Hope this helps...

    How can a computer that's been turned off (and I mean completely OFF) get a network request? Only a sleeping computer should react to such a request. If you're sure you shut down (Apple Menu, Shut Down), then only an internal power supply or logic board problem should cause this. The only way it could be software is if Lion is not shutting down the computer but is instead putting it to sleep. Is it a new Mac Mini? If so, you should have it replaced or repaired.

  • How do I downgrade mountain lion back to my mac mini 2011 lion server

    Hi,
    Previously, my mac mini mid 2011 was installed with mac os lion server then I have purchase and upgrade to mountain lion via iTunes.
    Somehow I decided to downgrade back to lion server due to use of my mac as server, unfortunately I have no idea how to downgrade with the following reasons:
    1. I don't create any time machine backup before so can't use that option.
    2. I have enable vault function so now the startup has hide the recovery HD icon
    3. In the Recovery mode (command + R), I only see an option to download and reinstall a fresh Mountain Lion only.
    4. I can't download and install Lion server from iTunes because this os was bundle with purchase of mac mini 2011 mid version.
    Any comments and helps here are appreciated. Thanks.

    Well, did you save a Carbon Copy Clone (http://www.bombich.com) of the Lion installation by chance? That would be the easiest to go back to and use / update. Outside of that, or having saved the original Lion installer, I know of no way to get the OS that you are after. For future referece, on a mac mini with two harddrives, I have always made a backup partition on the second drive using CCC, and schedule clone updates to that. You can't rely on TM, inmo, so something like CCC or SuperDuper is essential. Cheers,
    jigs

  • Does new Mac Mini 2011 have a DVD option?

    Will the DVD Air External Superdrive work on the 4 gb Mac Mini running Lion?

    stevenfrompalmyra wrote:
    Will the DVD Air External Superdrive work on the 4 gb Mac Mini running Lion?
    Yes.

  • Why my new mac mini 2011 so hot?

    Hi, im from Venezuela.
    2 weeks ago acquired a new mac mini, but I noticed that when I have open Virtualbox processor overheats and the fan cooler notcooling, it is this? fails some pictures
    Cold:
    Hot:
    My mac mini is damaged?

    I'm seeing same problem - new mini mac dropping internet randomly during the day.
    I bought the 1-year Mac program where I can go in for classes.  I'll schedule one to talk through this. 
    I'll also do all the software upgrades.
    Seems like a pretty general problem.  Maybe it'll get some attention.
    My wife hates the mac as a result of these problem.
    Most of the time we end up cycling power on the router downstairs, which is a 2-5 minute fix, that's a pain 3 times daily.

  • New mac mini 2011 windows 7 won't connect wireless in bootcamp

    When I boot into win 7 everything is fine apart from I have no wireless connection looked everywhere in setting but cannot find any way of doing it,wireless works fine in lion,I currently connect mac mini by wireless,Ethernet is not possible at this time as to far way,any body point me in right direction.
    Also another prob I have is since installing bootcamp whenever I boot the mac it always boots in windows 7 how do I make it boot into lion first thanks.

    Boot Camp - Installation & Setup Guide (OS X Lion)
    Frequently asked questions about Lion and Boot Camp 4.0
    The BootCamp Drivers have to be downloaded from inside the BootCamp Assistant (called "Windows Support Software").
    Reboot into OSX and then go to System Preferences then Startup Volume and set your OSX to be the default.
    For the Windows Installation this was altered.
    Stefan

  • Mac mini 2011 display going black

    I just got my new core i7 + SSD 2011 Mac mini. I noticed during initialization of Lion and during a reinstall of Lion that my screen would flash to black for a second or two. A few days after installing Lion I still get this random flash a black a few times throughout my sessions. It usually only does it 2 or three times withing 10 minutes of turning on the the computer, then it seems to be fine. One time it flashed a few times and then the display went all distorted and pixelated. To fix it I ended up having to disconnect my 24" Cinema display and reconnect it. This whole display issue is really annoying.
    I found this so I hope Apple is working to fix this issue:
    https://discussions.apple.com/message/15843631#15843631

    Shutdown the Mini, turn off the display, disconnect and reconnect all of your power and display connections ensuring that they are fully seated and snug.
    It could also just be that the display going to sleep and then rewaking.
    1. Go to: System Preference / Energy Saver and check to see if your Display Sleep slider didn't maybe get set to under 3 minutes.
    2. Go to: System Preferences / Exposé & Spaces / Exposé and see if there isn't a Hot Corner set to "Put Display to Sleep" that you pointer might be going to.

  • Does the Microsoft desktop 2000 work on the new Mac mini (2011)

    I was wondering; does Microsofts desktop 2000 wireless keyboard and mouse work with the new 2011 Mac Mini? It says it requires a disk installation for software or something like that, and the new mini doesn't have an optical drive.. Please answer as soon as possible! Thanks.

    If you have another Mac with a CD drive you can use that, however try the following webpage which has a download option for Mac.
    http://www.microsoft.com/hardware/en-us/d/wireless-keyboard-2000

  • Time Machine, New Mac Mini 2011 Storage Drives, Restoring... questions!

    Hi all,
    I've currently got a 2011 Mac Mini with a 500GB internal drive, and a 1TB Firewire connected external drive. Backups are done as as single operation to my time capsule.
    I've just bought a 250GB SSD and 2TB Hard Drive to fit internally to the Mac, and I'm ready to do the install.
    The questions are as follows:
    1- Does it matter which way round the drives go inside. Are both interfaces bootable, and when restoring from the time machine backup, can I specify the SSD as the installation drive.
    2 - With reference to the above, I guess within the time machine backup there are two sections. 1, my main OS Drive (the 500GB Drive backup) and 2, my external drive backup (the 1TB drive). I presume the recovery console will prompt me to restore the main OS drive, and then when I'm back into OSX I can then perform the restoration of hte other data onto the other internal drive.
    Has anyone ever done this, and if so, can they tell me how straightforward it was please?
    Really looking forward to more speed, more storage, and less clutter

    As far as being bootable, it does not matter which
    position the drive is in.  An Option key boot method
    will get you to the drive the first time and then set
    default once booted in OSX.
    I would suggest that you get yourself and external
    USB case or one of the many USB->SATA adapters
    and do the initial system restore to the SSD before install.
    This way you can verify that all is well with the restore
    of OSX (and the drive itself) before installing in the Mini as
    this is a task you REALLY want to do only once.
    As to your time machine restore question, I will defer that
    to someone else as I don't use time machine and personally
    never cared much for it.

  • New Mac Mini running Lion drops wifi continually

    I'm on an airport wifi network and the mini connects fine, then it shows no wifi connection, even though every other device I own is fine. It even sees the network as a possibility but doesn't log in unless I click on it. Even then, it often tells me there is no internet connection or other error, even though I know the network is running just fine. Any ideas anyone?

    There isn't much if any difference between Vista and 7. There are but Microsoft does more to be compatible. The trouble is Apple's drivers.
    Your OEM DVD for SL should be fine. Or Lion. But you need to copy to disk the BC folder of drivers and use control click or Properties and use Troubleshoot Compatibility Mode and select "Vista mode" for install.
    Just kick the drivers. I don't know if/where but look for an .msi file "Bootcamp64.msi" (assuming you use 64-bit which I would).
    Then there is always one or two more steps to setup Windows on Mac:
    audio driver
    network
    graphics
    you need to deal with those yourself manually 99% time.
    Assuming it is an ATI graphic? Intel + ATI? Catalyst 11.8 (sometimes the latest beta, all depends).
    MS though has now dropped Vista SP1 and only SP2+ is getting patched (like Tuesday).

Maybe you are looking for

  • Report questions

    hi all,          please send me the answer for the following questions, 1.how to add extra column to the existing report. 2.how to add new field to existing report. regards Suprith

  • Uploading Production Requirements For Finished Goods From External System To Run MRP For Components in SAP.

    Hello Production Planning experts, I'm looking to solve the current business problem: The company bought a third party software (JD Edwards) to calculate production requirements instead of using SAP's standard Production Planning or a tool like SAP's

  • Problems in XML to text

    I'm using Xalan to perform XSLT from XML to text file. As I need to format the text file with carriage return at the end of every string pattern produced, I declare a variable in my XSL as a new-line character. It works fine if I use a XSLT GUI tool

  • How to get Inserted and Deleted Rows in ALV

    I have looked at the BC_EDIT* examples but I still can't figure out how to determine which rows were Inserted and Deleted from the ALV list.  Can someone please provide me the code to do this? Thanks. Sandy

  • Problem with pthread compilation

    hi all... im trying to compile ccid-1.0.0 on solaris10 x86 and im getting problems that configure error : pthread my compiler version is:: bash-3.00# which cc /opt/SUNWspro/prod/bin/cc bash-3.00# cc -V cc: Sun C 5.7 2005/01/07 usage: cc [ options] fi