New mac User here, please help

Well, I finally got my first Mac. It's a G3 iMac, 600 MhZ with OS X 10.3.9. I just have one question. The power cord it came with has only 2 prongs on it, it seems it should be grounded, with 3 prongs. Is this OK? Also, the power cord in the back feels pretty loose. The first time I booted it, the power cord jiggled loose and lost power and shut down. Is this a normal problem with older Macs? Thanks.
Message was edited by: PJRandallChevik

Was the power cord's plug replaced with a two-prong type or does the plug look like the third/grounding prong was pulled out of it. Perhaps the previous owner of that cord didn't have a grounded receptacle and circumvented the problem by removing the grounding prong. In any event, the EMI shielding and electronics inside the computer need to be connected to a good ground via the third prong. That iMac uses a standard computer power cord (pictured here), which are available from many retailers. I'd recommend replacing it as soon as possible. Unless the power port itself is damaged, the power cord should have a snug fit when fully-inserted.

Similar Messages

  • HTML in EBAY for NEW MAC USER!  Please Help!

    Hi, I am a brand new MAC user. Just bought a MACBOOK last week. Here is my HTML prob. I sell on ebay. I called apple support and they were not able to help me. When I list my item on eBay, HTML comes up in the description area. On my older PC it was regular readable english and NOT html gobble de gook. Anyone know how to switch over from the HTML junk so I can see the regular english and write about my product? thanks so much. Sorry, I am not a computer guru. I only know how to read email and sell on ebay

    Welcome to Apple Discussions!
    Sounds like they are using non-standard HTML. Try using a different web browser*:
    http://www.macmaps.com/browser.html
    Also verify it isn't your e-mail program that is open when you are viewing the file. Anything via e-mail which can't be converted by an e-mail program will display as just plain HTML. Look to the right of the Apple logo on your top left corner to see which program is active.
    - * Links to my pages may give me compensation.

  • IPhoto lost after leopard installation- new Mac user needs your help!!

    First, let me state: BRAND NEW MAC USER- BEWARE!
    Just got a new mac for Christmas (refurbished). It came with iPhoto. My first call was to technical support about issues installing Leopard. After we resolved those problems, iPhoto was gone (as well as several other less essential things like checkers, etc). Since I installed Leopard, do I now need to repurchase iLife or iPhoto? iPhoto was the real reason we bought the system- I'm dying to use it but it has vanished. I know so many people have posted questions about similar issues but they all seemed to have existing libraries that aren't working correctly. So forgive me if this is a repeat questions but I'd really appreciate the help. Take pity on a very new and very lost user... Thank you!

    You need to re-install iPhoto from the system restore disks that came with your Mac. Choose to install the bundled applications only.
    Regards
    TD

  • New mac user here......do I need an anti virs program??

    Hi group,
    I am a new Mac user after being a windows / pc user forever. I finally got fed up with Windows and it's unstable ways we i purchased an I-mac from my local apple store this weekend. So far everything is working great and I am happy with the Imac.
    I do have a questions about the need for an anti-virus software. Do I need one with MAC? I have been told that there are almost no virus with Mac's, unlike a pc where you need nortin or someone other 3rd party package to keep your machine safe while surfing online.
    Does my new imac have something pre-installed or should I purchase one?
    Any advice would be greatly appreciated.
    Thank you

    Do You Need Anti-Virus Protection for Your Mac?
    According to Rich Mogull's article, Should Mac Users Run Antivirus Software?,
    "The reality is that today the Mac platform is relatively safe. There are hundreds of thousands of viruses and other malicious software programs floating around for Windows, but less than 200 are known to target the Mac, and many of those are aimed at versions of the Mac OS prior to Mac OS X (and thus have no effect on a modern Mac).
    It's not that Mac OS X is inherently more secure against viruses than current versions of Windows (although it was clearly more secure than Windows prior to XP SP2); the numerous vulnerabilities reported and patched in recent years are just as exploitable as their Windows equivalents. But most security experts agree that malicious software these days is driven by financial incentives, and it's far more profitable to target the most dominant platform."
    Mr. Mogull is a computer security expert. I recommend reading the entire article as it is quite informative.
    For additional information on viruses, trojans, and spyware visit The XLab FAQs and read the FAQs on viruses and spyware.

  • New Mac user looking for help with Finder, Preview, Keyboard, & Dock

    So about a month ago I switched over from a lifelong Windows user to a brand new MacBook Pro, and while I am adjusting pretty well, there are still some things that I haven't quite figured out.
    First up on the list is Finder! I like my files to be arranged just like how they are in Windows Explorer--folders first alphabetically, then files alphabetically. I've managed to acquire this setting by messing around with the "clean up by" and "arrange by" functions but I don't really know the specific combination. Most of the time these preferences are saved and set as the defaults under "View Options" but every once in a while it resets and I have to tinker around with the settings all over again. Does anyone know of a way to fix this? It's only happened twice so far, but I'd rather not have it happen again. Also, occasionally when I delete an item, there is a blank space left where the icon was instead of all the files following it bumping up a space. Any quick fixes for this bug?
    Next up is Preview. Again, I like the Windows Way and I like to be able to browse between the files in a folder while using Preview/Windows Photo Viewer. I know that there is a way to browse between files if you select the whole folder and stick it in Preview, but is there a way to achieve the same result without having to do that? An app or "extension" of some sort that adds arrows in to browse between photos? I've had no luck finding anything other than the aforementioned option. Is there a good free alternative to Preview that will function similarly with the browse between photos option?
    One of my favorite things about my new Mac is the backlit keyboard function. My old laptop didn't have it and as someone who is online more often at night it is super helpful. But is there a way to turn it off during the day/in bright settings? A way to put it on a timer? In System Preferences I selected the option "Adjust keyboard brightness in low light", which I assumed to mean would have the keyboard NOT very bright when there IS light, but it continues to light up just the same. Any apps or extensions to help with this one?
    And finally, the dock! This question is more about aesthetics than functionality but help is appreciated all the same. Currently, my dock looks like this: http://i42.tinypic.com/35ktxlz.png It is rather opaque and the indicator lights can barely be seen. However, in a lot of tutorial videos I've been watching, many people have docks that look like this: http://i.i.cbsi.com/cnwk.1d/i/tim/2011/07/19/Lion_LaunchPad.png It is a darker shade of gray, the divider is dashed rather than a straight line, and the indicator lights are clearly visible. Does anybody know how to get this look for the dock? I've looked in the dock preferences but there's not really anything in there other than magnification/size/effects.
    That about sums things up! I'm sorry if any of these seem like "silly" questions but they are all things I have been unable to find answers for. Any and all tips, tricks, and help is appreciated! Thanks in advance for all your help!!

    congratulations on coming over from the dark side.
    Seems like you are interested in column view, which would show you the hierarchy of folders and files:  Column View in Mac OS X Mountain Lion - For Dummies Not sure what's going on if your finder settings don't stay put. May be a corrupted preferences file, which is easy to fix, but is perhaps a topic for another discussion.
    What I'd suggest is to have an open mind and try to see what the mac can do, rather than force it to look like your windows machine. I mean, if you just want it to look like windows, then why bother switching? If you give it a little time, you'll start to appreciate the mac way of doing things, and see how it is infinitely more awesome, powerful, creative, intuitive, and better designed (and the software way better written)  than what you left behind. But that's your call.
    There are some threads on this forum with complaints about the backlight. Keyboard backlight settings query...: Apple Support Communities  Evidently it depends on the angle of the screen and the light sensor relative to the light. Some suggest that a SMC reset may help: Intel-based Macs: Resetting the System Management Controller (SMC)  This is not an issue for me, I just adjust the brightness with the keyboard buttons if I want. Real men shift their own gears, drink their coffee black, and adjust their own keyboard brightness. I am not aware of any software to exert more control over this feature but a search of macupdate  Download Apple Mac Software & iPhone Software : MacUpdate may help. I mean, it's up to you what is important. I can waste a lot of time playing around with the GUI and with unnecessary software, or I can just get my work (and play) done.
    You might prefer the no-glass dock, that removes the shelf, and makes the indicator lights like more discrete orbs. You can do this with the terminal. Using the terminal is also, perhaps, a topic for another discussion.I like the 2D dock much better. If you want I'll give you some directions for how to do it. Otherwise, here's a reference: 2D Dock - MacRumors Forums

  • Moving from PC to new Mac...please help

    Two questions:
    1. To move my entire itunes library (which is currently synced with my ipod) from my old PC to my new Mac, is everything I need to do listed in this article? Again, I am trying to figure out how to rebuild/move my current itunes library from PC to Mac.
    http://support.apple.com/kb/HT1329?viewlocale=en_US
    2. Can someone please tell me how I can make sure that everything that is on my iphone right now (contacts, text history, photos taken with iphone, music, etc) will remain there when I go to plug in my iphone to my new Mac for the first time? I am unsure as to what to do to make sure that I don't delete information from my iphone when I connect it to the new Mac for the first time....make sense?
    Any help would be GREATLY appreciated! I am eager to become a full fledged Mac user but am scared to death of losing my itunes library as well as my current iphone contents when I make the switch......

    allthingsapple,
    1. Basically this article is accurate, however if you are only referring to the iPod on your iPhone as the means of transferring your music, this will not work. This is because the iPhone cannot be placed into disk mode. Instead you would need to use other storage media, such as an external hard disk drive. On the last step instead of copying your music folder to your iPod, you will be copying it to the external drive.
    In the section titled "Is all the music together?", step 6, if you are running iTunes 8.0.2, you should follow these steps to consolidate the iTunes Library: http://docs.info.apple.com/article.html?path=iTunesWin/8.0/en/15329.html
    In addition to these steps, to save your playlists, I would recommend following this article to export your .xml file from your old computer, so you can import it on the new one: http://docs.info.apple.com/article.html?path=iTunesWin/8.0/en/15271.html
    2. Information like music and photos (with the exception of camera roll photos) will be deleted once you choose to sync those items from the new computer. The above steps will take care of your music, but you would need to take the extra step of moving your photos from your old computer to your new one using the external hard drive.
    iPhone and iPod touch: Syncing and merging data
    http://support.apple.com/kb/HT1296
    For all other data, you can first make an iTunes backup on the new computer. To do so:
    - Disable automatic syncing in iTunes Preferences on the new computer (click iTunes next to the apple in the top left, choose Preferences, then choose the Devices tab).
    - Connect your iPhone and when it appears in iTunes, right click on it under Devices, and choose "Back Up".
    - Once the backup is complete, you can safely sync all your other data to other programs on the new computer, like iCal, Safari, Address Book, etc.
    Hope this helps,
    Raleigh

  • Serious Problem with New Mac Pro! Please help!!

    Ok, long story short.
    My Mac pro keeps crashing after I installed the latest 05-2007 security update. It seems to crash everytime I come back to the computer after the screensaver has been on for a while (its not the screensaver though) I reinstalled the newer v1.1 version of the update and I thought the problem had gone, but it hasnt as the computer just crashed again.
    I cannot see any correlation to any other programs, and im 99% sure its not a hardware issue. It does not seem to relate to parallels, or the screensaver, or itunes, or anything!
    And there is another crazy thing, when the computer restarts, it says that it recovered from a serious error and asks you to sumit a report, so i click the send report button and do you see a normal report window with all the code ? NO!!! Press report and the initial window just DISAPPEARS, nothing else happens!!! i.e it wont send the but to apple!! no wonder they haven't fixed it!!!
    The history of the panic log is always the same error:
    Tue Jun 5 19:29:24 2007
    panic(cpu 3 caller 0x003BDEB0): OSObject::refcount: Attempting to retain a freed object
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x4c543bb8 : 0x128d08 (0x3cb134 0x4c543bdc 0x131de5 0x0)
    0x4c543bf8 : 0x3bdeb0 (0x3f0f94 0x3f0f70 0x160f5ba4 0xad319c0)
    0x4c543c18 : 0x3c0d3b (0x160f5ba0 0x4ae958 0x28 0x3c09c4)
    0x4c543c48 : 0x3c0e94 (0x13c58c40 0xad319c0 0x0 0x3c10ef)
    0x4c543c68 : 0x3c188a (0xad319c0 0x0 0x0 0x0)
    0x4c543ca8 : 0x3c18f7 (0xad319c0 0x13c3a100 0x13c36b00 0x1628d8)
    0x4c543ce8 : 0x38663c (0xad14840 0x0 0x4c543d28 0x3c1002)
    0x4c543d08 : 0x389e5b (0xad02080 0xff7da80 0x0 0xad02080)
    0x4c543d28 : 0x3b1448 (0xad02080 0xff7da80 0x4c543d58 0x3bdfd9)
    0x4c543d78 : 0x188511 (0xad02080 0x14da63b4 0x14da63c8 0x11cc32)
    0x4c543db8 : 0x12b4c3 (0x14df20b4 0x14da6398 0x0 0x0)
    0x4c543df8 : 0x124b17 (0x14df2000 0x0 0x18 0x4c543edc)
    0x4c543f08 : 0x195a42 (0x4c543f44 0x0 0x0 0x0)
    0x4c543fc8 : 0x19b21e (0xb101f20 0x0 0x19e0b5 0xb101f20) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb011e508
    Kernel version:
    Darwin Kernel Version 8.9.2: Thu Feb 22 18:08:23 PST 2007; root:xnu-792.19.2~1/RELEASE_I386
    Please help someone!

    Did you read the thread on Security Update 2007-005?
    Frozen Mac Pro

  • Alt key switching documents instead of Creating Clipping Mask - New Mac Pro 2014 - Please help

    I just got a new Mac Pro, and when I use the alt/option key as a shortcut in the layers palette (to create clipping masks and duplicate layers) instead it switches to other documents that I have open.  It's only after this happened that I realized how often I use the option key in my work flow and it's frustrating. 
    Please help,
    Thanks,
    Lonno

    Just solved it.  It had to do with my secondary monitor, which is where my layers palette was.  I used this link:
    https://discussions.apple.com/thread/5476222?tstart=0
    and turned off all the mission control settings I don't use.  Apparently it was switching monitors whenever I used the alt key.
    -Lonno

  • New Mac user here.....

    I actually have 2 questions. First I installed Growl for e-mail notifications. I later deleted the file using app zapper. I thought this deleted all files associates with the application but I still see preferences for Growl Mail in the mail app. anyone know how to delete this?
    Also, I have been experiencing the same problems that many have had after the last update with periodic failures of mail to send messages. It usually sends with one of my 3 accounts after several attempts, and even though it fails only sporadically, it is very frustrating. I edited all my mail accounts and still have the problem. I was wondering if anyone was having this issue and it was fixed with the Snow Leopard upgrade since all the apps were updated in that OS.
    Thanks for helping out and old PC user. Still finding my way around, but love the experience.

    Greetings,
    If you're able to set preferences for Growl in Mail, then you still have the Growl bundle installed, so you need to get rid of that, along with the Preference Pane for it. You'll find them here:
    Home/Library/Mail/Bundles
    /Library/Preference Panes
    Once you remove those, you should be able to restart Mail and not have any problems with Growl.
    As for your other problem, I don't experience the issue you describe, so I cannot help with that. I'm inclined to say it's a sporadic, temporary problem with the mail server of your ISP or email provider.

  • HI - new mac user.  When trying to view clips on certain sites i receive the following text: "missing plug in" can anyone assist?

    HI - new mac user here
    When trying to view certain sites i receive the following text: "missing plug in" can anyone assist? 
    I think it is related to viewing video or clips.....

    Well, if you're using Chrome, or Firefox go here this should also work with Safari. It will let you know if Flash is already installed in your browser. If your using Chrome it should have been intergrated. Were you able to get Flash installed so you can view video clips? Post back to let us know. Hope this helps. Also install Perian. See if that helps as well.
    Joseph

  • Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

    Contentmom6 wrote:
    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
    Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store.  Now try System Preferences > Displays > Detect Displays.  You should now be able to select a display mode for the monitor.  If it still doesn't work, then I'd check that everything is properly connected.  I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
    Bob

  • NEW MAC USER NEED HELP PLEASE!!!

    Hi All I am a new mac user I am a PC lover, but just recently purchased a mac notebook I have the 13inch notebook, and I am completely lost....do these thinsg come with anti virus on or do i have to install...if I do where can I find it as far as where it is and where I can check it Im use to my computer icon again any advice is welcome THANKS

    Hi - and congrats
    From this point on don't even think about security/virus software ...it's just not needed.
    Here's a link to help you get started with your Macbook...
    http://www.apple.com/support/switch101/
    Have fun!

  • Help Please - New MAC User - OS X 10.6.8 Freezing

    Hello......New MAC user after moving from Windows and I have been delighted with the perfomance.  Out of the blue yesterday typing became hesistant.  Today Keyboard quit.  Changed batteries but still no go.  That was quickly followed by the MAC freezing up where I couldn't open anything, without doing a manual shut down, going through the white screen/flashing earth process.  I did a search and followed instructions concerning Disk Repair but I was only offered the Repair Permission option, which I did.  Rebotted but still the same situation.   Total MAC novice here so any advice would be appreciated but in understanable english.... .  Many thanks in advance.

    Can't help with the keyboard issue, since I only use wired ones. For general info, see these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac 101: Mac Essentials,
    Mac OS X keyboard shortcuts,
    Anatomy of a Mac,
    MacTips,
    Switching to Mac Superguide, and
    Switching to the Mac: The Missing Manual,
    Snow Leopard Edition.&
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.

  • Itunes library locked!!!! new mac user please help!!!!!!

    i just got a new macbook pro.. i was transferring my music from an external hardrive to the itunes library, i have a lot of music, itunes stopped working so i forced it quit, and now when i try to open itunes i get this message that the itunes folder is locked or in a locked disk and i don't have permission to access it... What can i do??? im a new mac user.... please help!!!

    Di you get this fixed?
    You could try changing the permissions of the file/folder where the iTunes library is stored
    It ''may' work
    Find where the library is probably within the Music folder of your users home folder. Right click it and then Get Info
    Go to the the Sharing and Permissions section at the bottom and make sure your user has rear write permissions. If not click the padlock change it, click the gear wheel and then apply to enclosing items, and OK.
    I think that worked for me last time this happened...although I have now just upgraded to Snow Leopard, and the problem has just re occured and it has not worked this time. Maybe a re boot will help
    You could also go to the Disk Utility (type Disk Utility in Spotlight) and try a repair permissions and Repair Disk
    Neil
    Message was edited by: Neil Paisnel This may be a solution:
    http://support.apple.com/kb/HT1451

  • Icalentor and  ilife keep asking me about keychain password.when i login.if any one konws how to stop it ?thank you .please  help .i am a new mac user

    icalentor and ilife keep asking me about the keychain password ,wich i don't event know about (login password dosn't work), if any one knows about this ,and how to avoid from that ? thank you ! please help ,.i am a new mac user .

    See if this helps...
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
    Keychain Access asks for keychain "login" after changing login password...
    http://support.apple.com/kb/HT1631
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544

Maybe you are looking for

  • Scenario with Contract, PO and GRN

    Hi experts, I have a scenario where I'm buying a stock item with different quality. In material master, I'm maintaining it as split valuation. I'll be buying the stock item based on a quantity contract.  In the process, I will create PO with referenc

  • How can I include a parsys inside a javascript function.

    I am using radio button provided by CQ5.4. I am writing a javascript function which checks whether a radio button is being clicked or not.. If the radio button is being clicked an alert window is opening ..this means that function is being called whe

  • Composite Video

    Does the MacBook have Composite Video Out throught the Sound out port? like the original white iBooks CG

  • IPhone sync with Calendars

    When syncing my iPhone 4S with iTunes, I've just recently started getting the following message: "iTunes could not sync calendars to the iPhone 'XXX' because the iPhone disconnected.  I've taken the following actions: 1.     connected the iPhone to a

  • Backup problem to asha 305

    I am trying to backup may data from my nokia asha 305 but i can't backup my msges..