New Portlet Timeout Message

Having upgraded from 3.0.6 to 3.0.9, an error message appears
within some of the newly created portlets (created since the
upgrade)
Error: Timeout for content=1004 (the number varies)
There is no delay in the link and this message does not appear
for older portlets and does not even appear all the time.
Any suggestions or remedies?

Try setting the following parameter in the zone.properties file
( located under ($ORACLE_HOME/Apache/Jserv/etc directory).
servlet.page.initArgs=stall=100,requesttime=100
under the Servlet Init Parameter section of zone.properties.
Then restart your webserver/jserv.
Also you should consider applying patch 3.0.9.8.1
Hope this helps..
Prakash

Similar Messages

Portlet timeout message contains pluses

If my Java portlet has a timeout message of, eg, 'My portlet timed out' it appears as 'My+portlet+timed+out' on the portal. How do I get my whitespace to be honored?
Use or %20 ??
Thanks!
Brian

The timeout value you have specified might be too less for the portlet to complete its operation. Also the network traffic contributes to this problem, because of the load the portlet data fetching would take time. Please increase the timeout value and check.

Poor performance - portlet timeouts

I have a Portal instance running Oracle 8.1.7.2.0 and 9iAS 1.0.2.2.1 (Portal 3.0.9.8.2) on a 4 CPU Sun Solaris 2.6 box. Performance is totally unacceptable.
Navigation between pages is very slow and the portal consistently has portlet timeout issues. Even the standard Oracle "Welcome" page gets portlet timeouts. Typically, one of two messages is returned in place of the portlet:
1. Error: The portlet could not be contacted. The listener of the provider may be down, or functioning improperly.
2. Error: Timeout for content=xxxxx.
Refreshing the page usually makes the errors go away.
tkprof doesn't show anything unusual with the portal30 schema, but CPU utilization goes way up when a user navigates to a new page.
Has anyone experienced a similar problem?
Thanks!

I've included a portion of my jserv.log file below if this could help anyone diagnose the problem...Thanks
===================
[30/01/2002 16:28:03:966 GMT-06:00] page/DEBUG: active=25 username is null
[30/01/2002 16:28:03:974 GMT-06:00] page/DEBUG: active=36 Fetching timed out for
an Unknown Reason. Killing fetcher content-fetcher0 label=page
[30/01/2002 16:28:04:062 GMT-06:00] page/DEBUG: active=36 After connecting to Pa
ge Meta, millis=2957
[30/01/2002 16:28:04:116 GMT-06:00] page/DEBUG: active=36 Finishing servlet, mil
lis=3699
[30/01/2002 16:28:04:178 GMT-06:00] page/DEBUG: active=25 UncaughtException in t
hread name=content-fetcher0, starting a new fetcher after exception
java.lang.ThreadDeath
[30/01/2002 16:28:04:179 GMT-06:00] page/DEBUG: active=26 New thread created nam
e=content-fetcher25
[30/01/2002 16:28:04:187 GMT-06:00] page/DEBUG: active=25 ContentFetcher ready=c
ontent-fetcher25
[30/01/2002 16:31:36:332 GMT-06:00] page/DEBUG: active=37 Starting servlet, mill
is=1012429896121
[30/01/2002 16:28:04:187 GMT-06:00] page/DEBUG: active=25 ContentFetcher ready=
ontent-fetcher25
[30/01/2002 16:31:36:332 GMT-06:00] page/DEBUG: active=37 Starting servlet, mil
is=1012429896121
[30/01/2002 16:31:37:053 GMT-06:00] page/DEBUG: active=36 Starting Retrieval of
Meta-Data time=1012429896990
[30/01/2002 16:31:37:624 GMT-06:00] page/DEBUG: active=36 mTimeOut=10000000 for
page
[30/01/2002 16:31:37:892 GMT-06:00] page/DEBUG: active=25 username is null
[30/01/2002 16:31:38:283 GMT-06:00] page/DEBUG: active=36 Fetching timed out fo
an Unknown Reason. Killing fetcher content-fetcher11 label=page
[30/01/2002 16:31:39:119 GMT-06:00] page/DEBUG: active=36 After connecting to P
ge Meta, millis=2362
[30/01/2002 16:31:39:698 GMT-06:00] page/DEBUG: active=36 Finishing servlet, mi
lis=3554
[30/01/2002 16:31:47:257 GMT-06:00] page/DEBUG: active=25 content-fetcher11 sta
ting on page
[30/01/2002 16:31:47:272 GMT-06:00] page/DEBUG: active=25 Query String=_mode=3
[30/01/2002 16:32:05:113 GMT-06:00] page/DEBUG: active=26 Timeout occurred, lab
l=page url=http://abcd:7777/pls/portal30/!PORTAL30.wwpob_page.show?_pageid=
01,905,959,979,1004,1022,1024,1026,1028,1030
[30/01/2002 16:32:08:030 GMT-06:00] page/DEBUG: active=26 ContentFetcher Unexpe
ted Exception, name=content-fetcher11
[30/01/2002 16:32:08:030 GMT-06:00] page/DEBUG: active=26 ContentFetcher Unexpec
ted Exception, name=content-fetcher11
java.lang.IllegalArgumentException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.RuntimeException.<init>(RuntimeException.java:37)
at java.lang.IllegalArgumentException.<init>(IllegalArgumentException.ja
va:33)
at oracle.webdb.page.AssemblerContentRequest.setResponseHeaders(Assemble
rContentRequest.java:581)
at oracle.webdb.page.ContentFetcher.run(Compiled Code)
[30/01/2002 16:32:08:043 GMT-06:00] page/DEBUG: active=26 ContentFetcher ready=c
ontent-fetcher11
[31/01/2002 08:17:30:649 GMT-06:00] page/DEBUG: active=37 Starting servlet, mill
is=1012486650431
[31/01/2002 08:17:31:868 GMT-06:00] page/DEBUG: active=37 Starting Retrieval of
Meta-Data time=1012486651410
[31/01/2002 08:17:32:495 GMT-06:00] page/DEBUG: active=37 mTimeOut=10000000 for
page
[31/01/2002 08:17:32:843 GMT-06:00] page/DEBUG: active=26 username is null

Configuring News Portlet

Hi
I have my Oracle 9ias Rel 2 with Infrastructure running on a Windows 2000 Server. i am trying to configure News Portlet(Downloaded from OTN), i already have my JPDK and Url services infrastructure installed on the machine.
Have made the entries in jserv.properties and Zone.properties as reffered in the README Doc available with this portlet's ZIP file , now the problem is, unlike other Portlets this doc doesnt tell me how to test the sample(using an url), instead the DOC has some HTTP link under the heading 'Moreover.com news feed links '
Can any one help me as to how to Register this provider, in that case what URL should i specify?
is there any way of testing any Sample for the news Portlet?
TIA
Bijesh

The registration process is simarly to any Web provider as shown below.
1. On the Build tab of the Portal Design-Time Pages root page, click on Register a Portlet Provider within the portlet called Provider.
2. Enter Provider information for the Sample.
1. Name: NewsPortlet
2. Display Name: News Portlet Portlet Samples
3. Timeout: 300
4. Timeout Message: News portlet Timed Out
5. Implementation Style: Web
6. URL:
1. http://myhost.com:port/servlet/newsportlet (if you're using Oracle9iAS Portal 3.0.9)
2. http://myhost.com:port/jpdk/providers/newsportlet (if you're using Oracle9iAS Portal 9.0.2)
7. Login Frequency: Never
3. Click Finish.

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

Publisher News Portlet Not Working

Hi,
We use Publisher 6.5 with Oracle WCI 10gR3 portal. We have a News Portlet in our home page which has suddenly stopped displaying any content. It has a huge number of news articles, i.e. around 250 Plus articles.
We found a setting in the DET relating to max items which was set to 200, we increased it to 400, and published the whole folder, but things still did not work out.
If we try to preview the portlet while adding to another page, we are able to see the content, but once the portlet gets added, nothing displays once again. Also in Publisher Explorer, the content item attached to the News portlet is not getting displayed if we click Preview. We get an error message "Error - Requested resource is currently unavailable. Request to the remote server has timed out. Try again later or contact your portal administrator.
Gateway was not able to access requested content. If the error persists, contact your portal administrator. "
Please can anyone help as this is an urgent issue

First you should contact Oracle Support and get this set as a priority one issue and escalate it so that you get the fastest possible response.
It sounds to me like you've blown away your index.
I'd check the following:
1)
go into your publisher directory <portal home>/ptcs/publishedcontent/publish/<path to your content>
Verify that the content is actually still there (actual html files of each of your news articles).
2)
go into publisher explorer and check your articles folder (in the appropriate area) and verify that your content is still there.
3)
Within the problematic folder, open the Content Item Index - this will contain all of the items that you've posted to your announcement portlet.
If someone checked-out this file and then did an "undo-checkout" I believe it blows away all changes since the last "check-in" which typically is nothing, and blows away all your content - which would cause precisely the problem you are seeing.

"Connection Timeout" Message

Every time I try to connect to my Belkin wireless router, I keep getting a "Connection Timeout" message. I still can't connect to the internet through the wireless function. What should I do, and what does the "Connection Timeout" message imply.

Your computer tried to connect to your wireless router; but the router stopped responding, as such your computer could not establish a connection. Usually this issue is caused by interference from other wireless network and or noise electronic device (microwave, refrigerators). For instance a nabor may have recently added their own wireless network witch interfering with yours.
Or you may be simply be too far away from the router for the computer to talk clearly to each other.
This issue could also be cause by settings or typing in the incorrect password for the wireless router.
Things you could try:
un-plug and plugging back in the wireless router. rebooting your router give it a chance to refresh it self. Many router will also change their channel when rebooting; witch could help with an interference issue.
Moving your computer closer to the wireless router. Even if you don't want to be that close to the wireless router; being able to connect at all would help to better understand the issue.
have you always had this issue? or is this a new issue?

Safari Slow and ichat timeout message-Computer only 2 weeks old

So I just got my new mac 2 weeks ago. Considering that my computer is new and the high expectations I have for mac, the web pages are really slow to load. Sometimes the blue progress bar doesn't even make it past http://.
Also, when I try to communicate with someone on ichat it always delivers a server timeout message. My buddies say that it looks like I am signing on and off on their end.
I tried the suggestions listed in the discussions and am still experiencing slow load times and server timeout messages. It seems strange to me that this would happen considering I just got the computer. I am beginning to question my decision to switch to a mac.
Any help would be greatly appreciated. Thanks.

Hello sk:
You +"just kind of pick up a signal from somewhere in my building or neighborhood."+
If you are not subscribing to an ISP, you are piggybacking on some other service. *NO ONE* here can fix that for you.
Barry

I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!

I'm trying to change my ICloud e-mail to match the one associated with the Apple ID? Can someone tell me how to do this? Seems like the phone won't accept the new one, the message states "you already have acct associated....." (a given!!) I need help !!

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Create a new portlet in Deployed Portal in production environment

are there any ways to import or create a new portlet in Deployed Portal in production environment?
Edited by: user8322798 on May 1, 2011 7:26 AM

This can done via WSRP proxy portlets and streaming desktops. First, you'll need to have a WSRP producer setup somewhere. This could be another WLP webapp with portlets, or another server altogether. Or, you can use the JSR 286 WSRP import tool from within the Portal Administration Console (I think it's under Services | WSRP | Import Tool) -- this will allow you upload .war(s) of JSR 168 or 286 portlets, which will be turned into WSRP producer(s).
Then, you can use the Portal Administration Console to register a WSRP Producer, and then add portlets from the producer to your desktop (http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14235/chap_fed_books_pages.htm#FPGWP690). Additionally, once the producer has been registered in Portal Adminstration Console, an adminstrator user can use the Dynamic Visitor Tools from within the streaming desktop itself to add wsrp proxy portlets to the desktop (http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14243/dvt.htm#PDGWP691).
It is not possible to add new local .portlet files to a deployed application in production mode. This requires adding the file artifacts to the .ear/.war and redeploy the application.
Greg

Create a new group in Messaging

How do you create a new group in messaging, I had to select ios4.33 in the Operating system as ios5 is not available yet

Someone should show you how to perform a search. There's a sample in this forum.
http://forums.sun.com/thread.jspa?threadID=623860

TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Problems in creating new portlets with WLCS3.1

Hello,
I've the following problem with Weblogic Commerce Server 3.1:
I have added a new portal and it worked great. I put severals
predefined portlets and it worked too.
But when I tried to add a new portlet (the simple welcome.html
doc sample), I just see the titlebar of it.
Can someone help me ?
Thanks

Have u created the data providers

Hi - a new and confusing message when I try to connect my iphone with itunes on my laptop: "this iphone cannot be used because the Apple Mobile Device Service is not started". Any idea of my way out of this cul-de-sac?? Brian

Hi, I'm getting a new and confusing message when I connect my Ipad/phone to my laptop: "This iphone cannot be used because the Apple Mobile Device Service is not started" ... any idea, anyone, how I get out of this cul-de-sac. Brian

try this http://melchoi.wordpress.com/tag/this-iphone-cannot-be-used-because-the-apple-mo bile-device-service-is-not-started/
Hope it's gonna help

CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

In the Print dialog box, click Print Settings and verify the Paper Size you chose. This is important because the 3880 has three paper feeds (auto sheet feeder, rear manual feed, front manual feed). And for each major paper size you have to choose not only the size but also the correct feed. For example, if you want US Letter, choose US Letter, notice that this menu expands to five more US Letter paper size options, and choose the specific US Letter paper feed you want.
If there is a mismatch between the paper size + feed combination you picked and the feed where the paper actually is, you can get the error that you're seeing. Because the Epson printer driver will look for the paper in a feed where there isn't any paper.
So if you've added US Letter paper to the automatic paper tray, in Paper Size double-check that you chose the US Letter submenu command that says just US Letter, not one of the other options like US Letter (Manual - Front).

New Portlet Timeout Message

Similar Messages

Maybe you are looking for