I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

Similar Messages

  • Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

    Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

    I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

  • Get "missing operating system" message when trying to access bootcamp

    Get "missing operating system" message when trying to access bootcamp in win 7
    i  have windows instaled about a year now.yesterday i tranfer 300 gb of  music in my laptop.today i open my mac hold alt on start up to sellect  opereting system,i found MacintosHD,recovery, and windows, and i select  the windows to boot,but says to me (missing operating system).i boot  again osx to see what hapend.osx is workin perfect.i tried to boot  windows again but the same msg (missing operating system).i have not  make any changes in my mac osx...!!!

    Get "missing operating system" message when trying to access bootcamp in win 7
    i  have windows instaled about a year now.yesterday i tranfer 300 gb of  music in my laptop.today i open my mac hold alt on start up to sellect  opereting system,i found MacintosHD,recovery, and windows, and i select  the windows to boot,but says to me (missing operating system).i boot  again osx to see what hapend.osx is workin perfect.i tried to boot  windows again but the same msg (missing operating system).i have not  make any changes in my mac osx...!!!

  • Hi, I have an iPad 2, my email button was working fine until about an hour ago and by pushing the mail button my hotmail messages came up automatically,now when I try I just get the blank page with no messages on? Any help please ?

    Hi,
    I have an I pad2 ,mail button was working fine until a couple of hours ago,when I pressed the button my hotmail messages came up,now when I hit the button I just get a blank template ? Help please !

    No,didn't have any of those but have since solved the problem by following the advice in user guide to switch off and switch back on again,thanks for your efforts anyway.

  • Skype is not working on my mac book pro. Initially it was working fine but from a week ago it is not opening. It always shows error when I perform reopen it does not do any thing. I am using apple express for wifi.

    Hi,
    I recently bought mac book pro. I installed skype application on it and initially it was working fine but from few days it is not opening the application, showing some error.... Can you please help me to solve this problem.
    bye
    Harminder Singh

    harminder@apple  -  any luck?    Try this,  open Finder and  press command-shift-G and copy and paste: 
    ~/Library/Application Support/Skype
    In this Skype folder: delete the file shared.xml  and restart Skype.
    See if this helps.

  • Fix for "Not Connected" Error Messages When Trying to Access Web Services

    If you run across an error message on your printer stating that it is "Not Connected" when trying to access ePrint or your Apps, but you know it is connected to the internet, it probably just means that the printer is not connecting to the server properly.
    Here is the first set of steps I would try, since they seem to resolve this issue half of the time.
    The first thing I would try in this situation is a network reboot.
    First, disconnect the power cord from the back of your router. 
    Next disconnect the power cord from either the back of the printer or the wall, without powering it off first. 
    Wait about 30 seconds and reconnect the power cord to your router.
    Wait about another 30 seconds and plug the printer back in. It should boot back up automatically, but if it doesn't go ahead and press the power button.
    Once everything is back up and running, try to access ePrint or your Apps.
    If those steps don't work for you, the next thing would be setting a Static IP & DNS for the printer. Before doing this, you want to print off a network configuration page. It varies from model to model, but it is usually found under the Wireless Settings or under Reports in the Setup menu. After you have that page, follow these steps.
    Before we start, we need a network configuration page with your current connection settings. To get this, press the wireless button on the front of your printer and then press "Print Info" or "Print Report". This will print off a network configuration page, which has information on it that we need to complete the next few steps.
    After you have that, we will need to access the printers Embedded Web Server (EWS). You can do so by entering the printers IP address (from the network configuration page) into your browsers address bar and pressing enter.
    Once there, press the "Network" tab at the top of the page. From there you will want to click the "IPv4" button, located on the lef-hand side of the page. It will be there for WIreless and Wired, so make sure to click the one for you however you are connected. If you do not see "IPv4", you should see "Networking", press that and then press "Network Address(IP)".
    Next, you will want to click the small round button next to "Manual IP Address" and then fill in the boxes for IP Address, Subnet Mask, and Default Gateway, using the information found on the network configuration page.  
    For the Primary or Preffered DNS Server, you will want to enter 8.8.8.8.
    For the Secondary or Alternate DNS Server, you will want to enter 8.8.4.4.
    Click apply and when the message pops up saying that the changes have been applied, press "OK". 
    Press the power button on your printer, wait for it to fully power off and then press it again to power it back on.
    After doing this, go ahead and try to enable ePrint again.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    This question was solved.
    View Solution.

    The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect. 
    I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I get an Internal Error message when trying to access Hotmail

    When I try to access my Hotmail inbox, I get an Internal Error message Reference #3.48406ca.1327362199.109cf5de. I can still get my mail through Internet Explorer. Please, only simple replies, I am a senior and not up with all the technical stuff, thanks

    I fixed it myself!

  • So my iPod 5 was working fine until about 30 minutes ago when I updated it and put it in my bag and grabbed it and wouldn't turn back on. What should I do?

    I was just using my iPod put it down for about an hour and then suddenly the screen wouldn't turn on and no sense of life at all. It didn't help that my home button is broken river but this is not normal also I have never dropped it.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • "No Internet Connectivity" error message when trying to access Cloud

    I have a Motorola Droid Mini.
    When I try to open the cloud,  I get the message "No Internet Connectivity - We have detected that your phone does not have internet connectivity."
    I'm looking at a solid, full bars wifi signal on my phone
    It says I'm connected in the wifi menu
    I've tried restarting my phone.
    I've tried connecting it to my computer
    Why does my phone have no internet connectivity?
    Is there a fix?

    I simply uninstalled the updates.  It's working now.  Forgot the uninstall/reinstall phase of troubleshooting.

  • Get "missing operating system" message when trying to access bootcamp since installing Lion.

    I cannot access bootcamp since installing Lion, either through Bootpicker or after holding down the option key after restart.  I get the message "Missing operating system." I have access to the bootcamp partition.  It shows up on my Mac desktop and was able to run disk verify and repair on it from disk utility. No change.  I am using a 2.16 GHz Intel Core 2 Duo processor.  Did Lion relabel the bootcamp disk when it created the recovery disk?  Thanks.

    See here the solution:
    https://discussions.apple.com/thread/3199163?start=0&tstart=0

  • Why do I get a 'Bad Request' message when trying to access my Provident Bank website bookmark?

    For some unknown reason, I cannot access my bank account, which is bookmarked. I can access all other bookmarks without incident. The bank says the problem lies with Firefox. This problem just occurred since I upgraded my Firefox.

    This issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    See also:
    * http://kb.mozillazine.org/Cookies#Removing_cookies

  • User gets an Content Encoding Error message when trying to access workspace

    Hi.
    I've created a workspace and added several users to it who can access it without any issues.
    However, one specific user (Leslie Elstad - https://beehiveonline.oracle.com/teamcollab/profiles/[email protected]) can't access her workspaces. She is using Firefox on a Solaris 10 machine.
    Here is what she told me:
    "I clicked on the Start button under Team Workspaces, which took me here:
    https://beehiveonline.oracle.com/teamcollab/
    and displayed the familiar Content Encoding Error message."
    Please advise.

    Hi.
    Please let me know what is going on when we add people to a Beehive Online group (Solaris Curriculum).
    People are frequently getting this same error/message when trying to access several workspaces.
    New cases, please help me fix their access:
    [email protected] can't access https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
    [email protected]: can't access: https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
    Thanks.

  • I have a 5s which has been working fine until about a week ago when any calender event added to my phone will not sync with my enterprise server. Any calender event entered on my PC (enterprise) does show on my phone. Mail is working fine both ways,ideas?

    i have a 5s which has been working fine until about a week ago when any calender event added to my phone will not sync with my enterprise server. Any calender event entered on my PC (enterprise) does show on my phone. Mail is working fine both ways,ideas?Iphne 5s and enterprise

    See my reply to this message:
    https://discussions.apple.com/thread/2557520?start=15&tstart=0
    The problem is that the POP3 client is not issuing a DELE command to remove the email from the server.

  • Why can't I get my mail, I get a message "connection to server failed" but I can get on all other web sites.  It worked fine until about a month ago.

    WHY CAN'T I GET MY MAIL, I GET A MESSAGE 'CONNECTION TO SERVER FAILED" BUT I CAN GET ON ALL OTHER WEB SITES.  IT WORKED FINE UNTIL ABOUT A MONTH AGO.  I CANCELLED MY ACCOUNT, PUT MY INFO IN AGAIN AND STILL GET THE MESSAGE "CONNECTION TO SERVER FAILED"  HELP PLEASE!

    have you tried removing and readding the e-mail account? sometimes settings get corrupted or changed on the server end...something computers can sometimes handle better than the mail interface.

  • Installed a wireless canon Pixma MX432 printer back in November for use with my Mac Book Air. All was working normally until this past week when I began getting a message, "printer not connected." What is going on? Netgear Wireless N Router seems to be ok

    My new canon Pixma MX432 printer is not printing. It was printing fine until about ten days ago. I use a Netgear Wireless N router, which is also new. What do I need to do. I get a message when trying to print that says "printer not connected." In addition, my old Gateway laptop will still print fine apparently because it has a cable connection to the printer. Puzzled!

    Have you tried rebooting the router? I would unplug it, wait a few seconds, then plug it back in. Be sure you know the password etc. if that doesn't work, try unplugging and rebooting the printer. Good luck!

Maybe you are looking for

  • I can not open more than one firefox page at a time

    I usually run 2-3 firefox separate pages during in internet session. Now I can only open one page at a time.

  • Problem in Transporting to Production

    Hi, I need to transport "HRMS_BW_TXT_EMPLOYEE" object to production. how can i make a request to transport this from Development to Production... Regards, Abhishek

  • List Box With Writing Facility

    Hello Experts ,                         I want to create a list box in selection-screen with input facilty,                         i.e i should be able write in that list box just in case of parameters , right now                         i'm able to

  • Self signed & CA signed certificate

    Hi Experts, Please consider below scenario. users - >Outer Firewall----.Portal with static content ->Cisco load balancer ->Inner Firewall>Apache>Web dispatcher-->SRM Portal with dialog instances - > SAP SRM - >Backend. Here user will directly hit Cis

  • LMS 3.2 DFM error "URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!"

    Hi Joseph, one of our client is using lms 3.2 and getting the following error in DFM -> device import -> Auto Allocation mode configuration. Error in getting instance of TreeGenerator class com.cisco.nm.trx.kdm.utils.DcrGroupSelectorTreeGenerator Roo