NEW Record in Access DB

here is the page......... not sure whats wrong
created an 'new record' from server behaviors (Insert
Record-form3)
It is suppose to also go to the default.asp page after a
submit????? not working

trying to setup an update statement to the access DB!
i have a recordset and a form now........ONLY
I go to the server behavior tab choose update record
when it comes up i put in :
conn
table
record from
PROBLEM:
Get Values from: <unnamed>
Can't change that.?

Similar Messages

How can I add a new record in an Access table.

How can I add a new record in access with LabView, using activex, without using the database connectivity tools.
Message Edited by Noawena on 05-16-2008 09:25 AM

Much easier with a toolkit but you could use ADO objects,
get connection, make a SQL object "INSERT record INTO table where ...."
Execute the parameterized query
Free up record sets data
close connection when done.
This is a very simplified version
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

New Records in database do not show up in resultset

Hi,
I have seen very little on this but I have a MS Access database that I have records in. If I change one of those records, I see the change in the resultset which I am just printing out for now using System.out.println . So I add new records manually to the database just so I am some records to test with and those records do not show up in the resultset. After doing something (not exactly sure what as I did a lot), I happen to go back and then saw the new records. So I add some more and could not see those records. I AM closing my resultsets, connections, etc. I read something where someone had the same problem and thought something was being cached which seemed reasonable to me. So I tried rebooting for the heck of it and I still see only the previous records and not the new ones.
Any ideas,
Thanks,
Karl

Hi Karl,
There are problems some times like the one you mentioned when you are using both manual and programatic inserts/updates/deletes.
When ever u face any such problems look out for following :
Check if all ResultSet, Statement and Connection objects are closed before exiting the code. That is normal exit and abnormal exit (due to any error/exception).
After manual insertion save and close target table.
If the problem still exists then try re-compiling your code after closing the your Access (*.mdb) database.
I hope this will work for you.
regards,
Humayun

URL for a new record link in report

My requirement is to have a hyperlink column on the report that will opens a new record edit screen to create a new Contact record with the Account Name and address info. defaulted in this new record screen.
I've added a column to my report and change the Data Format to Custom Text Format with a URL that is derived from the url on the address bar of the browser when access the New button of the Contact section within the Account detail screen.
The url on the address bar is as followed:
https://secure-ausomxbga.crmondemand.com/OnDemand/user/ContactInsert?OMCR0=ABGA-5Y4FNM&OMTGT=ContactEditForm&OMTHD=ContactNewNav&OMCBO=Account&OMRET0=AccountDetail%3focTitle%3dWALT%2bDISNEY%2bMEMORIAL%2bCA%2bINSTITUTE%2bFLORIDA%2bHOSPITAL%26OMTGT%3dAccountDetailForm%26OMTHD%3dAccountDetailNav%26ocEdit%3dY%26AccountDetailForm.Id%3dABGA-5Y4FNM%26OCTYPE%3dIV-Corporate%2bMaster%2bData%26ocTitleField%3dName&OCNOEDITTYPE=Y
I've tried to replace the field values with the analytics field names as followed but is getting error when trying to click on the column with the following url:
@[html]”*a href=”/OnDemand/user/ContactInsert?OMCR0=’ || Account."Account ID" || ‘&OMTGT=ContactEditForm&OMTHD=ContactNewNav&OMCBO=Account&OMRET0=AccountDetail%3focTitle=’||Account."Account Name"||’%26OMTGT%3dAccountDetailForm%26OMTHD%3dAccountDetailNav%26ocEdit%3dY%26AccountDetailForm.Id=’ || Account."Account ID" || ‘%26OCTYPE%3d’Other’%2bData%26ocTitleField%3dName&OCNOEDITTYPE=Y*/a*
( < is replaced with * for posting purpose)
Is what I'm trying to do possible? If possible, any one can help me out on the syntax? Thanks in advance.

Greetings TTone,
Its not possible.
The only field which can be set is the Account by setting OMCR0=ADSA-6FX7YL
https://secure-ausomxdsa.crmondemand.com/OnDemand/user/ContactInsert?OMRET1=AccountDetail%3fOMTGT%3dAccountDetailForm%26OMTHD%3dAccountDetailNav%26AccountDetailForm.Id%3dADSA-6FX7YL%26OCTYPE%3dProspect%26ocTitleField%3dName%26ocTitle%3dThe%2bAndersons%2b%252c%2bInc.%26ocEdit%3dY&OMCR0=ADSA-6FX7YL&OMTGT=ContactEditForm&OMTHD=ContactNewNav&OMCBO=Account&OMRET0=AccountHomePage&OCNOEDITTYPE=Y
Regards,
Abeer @ Sakonent
Edited by: 796422 on Sep 22, 2010 4:30 AM
Edited by: sakonent.com on Sep 30, 2010 12:08 PM

Creating new record in Results Table giving Error

Hi All,
On update page there is a Results Table with Add button to create a new row.
While creating a new record on Results Table gives error
Attribute set for AccessId in view object XXLCUpdVariablesVO1 failed
I have checked EO and VO attributes, everything seems to be right.
Also Updatable is set to 'Always'.
Still don't know why this error is coming up.
Plz help to resolve this error.
Thanks,
SK

Ajay,
XML code
<?xml version='1.0' encoding='windows-1252' ?>
<!DOCTYPE Entity SYSTEM "jbo_03_01.dtd">
<Entity
Name="XXLCVarAssignmentsEO"
DBObjectType="table"
DBObjectName="XXLCOKC_VARIABLE_ASSIGNMENTS"
AliasName="XXLCVarAssignmentsEO"
BindingStyle="OracleName"
UseGlueCode="false"
RowClass="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEOImpl"
DefClass="oracle.apps.fnd.framework.server.OAEntityDefImpl"
CollClass="oracle.apps.fnd.framework.server.OAEntityCache" >
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="10.1.3.41.57" />
<AttrArray Name="_publishEvents">
</AttrArray>
<Attr Name="_panelSchema" Value="table|alias" />
<Attr Name="_codeGenFlag2" Value="Init|Delete|Access|Val" />
</DesignTime>
<Attribute
Name="AssignmentId"
IsNotNull="true"
ColumnName="ASSIGNMENT_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS"
PrimaryKey="true" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="AssignmentAccess"
IsNotNull="true"
Precision="30"
ColumnName="ASSIGNMENT_ACCESS"
Type="java.lang.String"
ColumnType="VARCHAR2"
SQLType="VARCHAR"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="30" />
</DesignTime>
</Attribute>
<Attribute
Name="VariableId"
IsNotNull="true"
ColumnName="VARIABLE_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="ListValueId"
IsNotNull="true"
ColumnName="LIST_VALUE_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="OrganizationId"
IsNotNull="true"
Precision="15"
Scale="0"
ColumnName="ORGANIZATION_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="TemplateId"
IsNotNull="true"
ColumnName="TEMPLATE_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="AuctionHeaderId"
IsNotNull="true"
ColumnName="AUCTION_HEADER_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="PoHeaderId"
IsNotNull="true"
ColumnName="PO_HEADER_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="CreatedBy"
IsNotNull="true"
ColumnName="CREATED_BY"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="CreationDate"
IsNotNull="true"
ColumnName="CREATION_DATE"
Type="oracle.jbo.domain.Date"
ColumnType="DATE"
SQLType="DATE"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="7" />
</DesignTime>
</Attribute>
<Attribute
Name="LastUpdateDate"
IsNotNull="true"
ColumnName="LAST_UPDATE_DATE"
Type="oracle.jbo.domain.Date"
ColumnType="DATE"
SQLType="DATE"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="7" />
</DesignTime>
</Attribute>
<Attribute
Name="LastUpdatedBy"
IsNotNull="true"
ColumnName="LAST_UPDATED_BY"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="LastUpdateLogin"
IsNotNull="true"
ColumnName="LAST_UPDATE_LOGIN"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Attribute
Name="AccessId"
ColumnName="ACCESS_ID"
Type="oracle.jbo.domain.Number"
ColumnType="NUMBER"
SQLType="NUMERIC"
TableName="XXLCOKC_VARIABLE_ASSIGNMENTS" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</Attribute>
<Key
Name="SysC00329905" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.AssignmentAccess" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""ASSIGNMENT_ACCESS" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329905" />
</DesignTime>
</Key>
<Key
Name="SysC00329906" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.VariableId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""VARIABLE_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329906" />
</DesignTime>
</Key>
<Key
Name="SysC00329907" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.ListValueId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""LIST_VALUE_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329907" />
</DesignTime>
</Key>
<Key
Name="SysC00329908" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.OrganizationId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""ORGANIZATION_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329908" />
</DesignTime>
</Key>
<Key
Name="SysC00329909" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.TemplateId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""TEMPLATE_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329909" />
</DesignTime>
</Key>
<Key
Name="SysC00329910" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.AuctionHeaderId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""AUCTION_HEADER_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329910" />
</DesignTime>
</Key>
<Key
Name="SysC00329911" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.PoHeaderId" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""PO_HEADER_ID" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329911" />
</DesignTime>
</Key>
<Key
Name="SysC00329912" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.CreatedBy" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""CREATED_BY" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329912" />
</DesignTime>
</Key>
<Key
Name="SysC00329913" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.CreationDate" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""CREATION_DATE" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329913" />
</DesignTime>
</Key>
<Key
Name="SysC00329914" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.LastUpdateDate" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""LAST_UPDATE_DATE" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329914" />
</DesignTime>
</Key>
<Key
Name="SysC00329915" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.LastUpdatedBy" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""LAST_UPDATED_BY" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329915" />
</DesignTime>
</Key>
<Key
Name="SysC00329916" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.LastUpdateLogin" />
</AttrArray>
<DesignTime>
<Attr Name="_checkCondition" Value=""LAST_UPDATE_LOGIN" IS NOT NULL" />
<Attr Name="_isCheck" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329916" />
</DesignTime>
</Key>
<Key
Name="SysC00329917" >
<AttrArray Name="Attributes">
<Item Value="xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO.AssignmentId" />
</AttrArray>
<DesignTime>
<Attr Name="_isPrimary" Value="true" />
<Attr Name="_DBObjectName" Value="SYS_C00329917" />
</DesignTime>
</Key>
</Entity>
XXLCVarAssignmentsEOImpl Code
package xxlc.oracle.apps.okc.schema.articles.variables.server;
import oracle.apps.fnd.framework.OAAttrValException;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.server.OADBTransaction;
import oracle.apps.fnd.framework.server.OAEntityDefImpl;
import oracle.apps.fnd.framework.server.OAEntityImpl;
import oracle.jbo.AttributeList;
import oracle.jbo.Key;
import oracle.jbo.domain.Date;
import oracle.jbo.domain.Number;
import oracle.jbo.server.AttributeDefImpl;
import oracle.jbo.server.EntityDefImpl;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class XXLCVarAssignmentsEOImpl extends OAEntityImpl
public static final int ASSIGNMENTID = 0;
public static final int ASSIGNMENTACCESS = 1;
public static final int VARIABLEID = 2;
public static final int LISTVALUEID = 3;
public static final int ORGANIZATIONID = 4;
public static final int TEMPLATEID = 5;
public static final int AUCTIONHEADERID = 6;
public static final int POHEADERID = 7;
public static final int CREATEDBY = 8;
public static final int CREATIONDATE = 9;
public static final int LASTUPDATEDATE = 10;
public static final int LASTUPDATEDBY = 11;
public static final int LASTUPDATELOGIN = 12;
public static final int ACCESSID = 13;
private static OAEntityDefImpl mDefinitionObject;
/**This is the default constructor (do not remove)
public XXLCVarAssignmentsEOImpl()
/**Retrieves the definition object for this instance class.
public static synchronized EntityDefImpl getDefinitionObject()
if (mDefinitionObject == null)
mDefinitionObject =
(OAEntityDefImpl)EntityDefImpl.findDefObject("xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVarAssignmentsEO");
return mDefinitionObject;
/**Add attribute defaulting logic in this method.
public void create(AttributeList attributeList)
super.create(attributeList);
OADBTransaction transaction = getOADBTransaction();
Number asgId = transaction.getSequenceValue("XXLC_VAR_ASG_SEQ");
setAssignmentId(asgId);
/**Add entity remove logic in this method.
public void remove()
super.remove();
/**Add Entity validation code in this method.
protected void validateEntity()
super.validateEntity();
/**Gets the attribute value for AssignmentId, using the alias name AssignmentId
public Number getAssignmentId()
return (Number)getAttributeInternal(ASSIGNMENTID);
/**Sets <code>value</code> as the attribute value for AssignmentId
public void setAssignmentId(Number value)
if (value != null)
OADBTransaction transaction = getOADBTransaction();
Object[] varKey = {value};
EntityDefImpl varDefinition = XXLCVarAssignmentsEOImpl.getDefinitionObject();
XXLCVarAssignmentsEOImpl variable =
(XXLCVarAssignmentsEOImpl)varDefinition.findByPrimaryKey(transaction, new Key(varKey));
if (variable != null)
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"AssignmentId", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_UNIQUE"); // Message name
setAttributeInternal(ASSIGNMENTID, value);
/**Gets the attribute value for AssignmentAccess, using the alias name AssignmentAccess
public String getAssignmentAccess()
return (String)getAttributeInternal(ASSIGNMENTACCESS);
/**Sets <code>value</code> as the attribute value for AssignmentAccess
public void setAssignmentAccess(String value)
setAttributeInternal(ASSIGNMENTACCESS, value);
/**Gets the attribute value for VariableId, using the alias name VariableId
public Number getVariableId()
return (Number)getAttributeInternal(VARIABLEID);
/**Sets <code>value</code> as the attribute value for VariableId
public void setVariableId(Number value)
setAttributeInternal(VARIABLEID, value);
/**Gets the attribute value for ListValueId, using the alias name ListValueId
public Number getListValueId()
return (Number)getAttributeInternal(LISTVALUEID);
/**Sets <code>value</code> as the attribute value for ListValueId
public void setListValueId(Number value)
setAttributeInternal(LISTVALUEID, value);
/**Gets the attribute value for OrganizationId, using the alias name OrganizationId
public Number getOrganizationId()
return (Number)getAttributeInternal(ORGANIZATIONID);
/**Sets <code>value</code> as the attribute value for OrganizationId
public void setOrganizationId(Number value)
setAttributeInternal(ORGANIZATIONID, value);
/**Gets the attribute value for TemplateId, using the alias name TemplateId
public Number getTemplateId()
return (Number)getAttributeInternal(TEMPLATEID);
/**Sets <code>value</code> as the attribute value for TemplateId
public void setTemplateId(Number value)
setAttributeInternal(TEMPLATEID, value);
/**Gets the attribute value for AuctionHeaderId, using the alias name AuctionHeaderId
public Number getAuctionHeaderId()
return (Number)getAttributeInternal(AUCTIONHEADERID);
/**Sets <code>value</code> as the attribute value for AuctionHeaderId
public void setAuctionHeaderId(Number value)
setAttributeInternal(AUCTIONHEADERID, value);
/**Gets the attribute value for PoHeaderId, using the alias name PoHeaderId
public Number getPoHeaderId()
return (Number)getAttributeInternal(POHEADERID);
/**Sets <code>value</code> as the attribute value for PoHeaderId
public void setPoHeaderId(Number value)
setAttributeInternal(POHEADERID, value);
/**Gets the attribute value for CreatedBy, using the alias name CreatedBy
public Number getCreatedBy()
return (Number)getAttributeInternal(CREATEDBY);
/**Sets <code>value</code> as the attribute value for CreatedBy
public void setCreatedBy(Number value)
setAttributeInternal(CREATEDBY, value);
/**Gets the attribute value for CreationDate, using the alias name CreationDate
public Date getCreationDate()
return (Date)getAttributeInternal(CREATIONDATE);
/**Sets <code>value</code> as the attribute value for CreationDate
public void setCreationDate(Date value)
setAttributeInternal(CREATIONDATE, value);
/**Gets the attribute value for LastUpdateDate, using the alias name LastUpdateDate
public Date getLastUpdateDate()
return (Date)getAttributeInternal(LASTUPDATEDATE);
/**Sets <code>value</code> as the attribute value for LastUpdateDate
public void setLastUpdateDate(Date value)
setAttributeInternal(LASTUPDATEDATE, value);
/**Gets the attribute value for LastUpdatedBy, using the alias name LastUpdatedBy
public Number getLastUpdatedBy()
return (Number)getAttributeInternal(LASTUPDATEDBY);
/**Sets <code>value</code> as the attribute value for LastUpdatedBy
public void setLastUpdatedBy(Number value)
setAttributeInternal(LASTUPDATEDBY, value);
/**Gets the attribute value for LastUpdateLogin, using the alias name LastUpdateLogin
public Number getLastUpdateLogin()
return (Number)getAttributeInternal(LASTUPDATELOGIN);
/**Sets <code>value</code> as the attribute value for LastUpdateLogin
public void setLastUpdateLogin(Number value)
setAttributeInternal(LASTUPDATELOGIN, value);
/**getAttrInvokeAccessor: generated method. Do not modify.
protected Object getAttrInvokeAccessor(int index,
AttributeDefImpl attrDef) throws Exception
switch (index)
case ASSIGNMENTID:
return getAssignmentId();
case ASSIGNMENTACCESS:
return getAssignmentAccess();
case VARIABLEID:
return getVariableId();
case LISTVALUEID:
return getListValueId();
case ORGANIZATIONID:
return getOrganizationId();
case TEMPLATEID:
return getTemplateId();
case AUCTIONHEADERID:
return getAuctionHeaderId();
case POHEADERID:
return getPoHeaderId();
case CREATEDBY:
return getCreatedBy();
case CREATIONDATE:
return getCreationDate();
case LASTUPDATEDATE:
return getLastUpdateDate();
case LASTUPDATEDBY:
return getLastUpdatedBy();
case LASTUPDATELOGIN:
return getLastUpdateLogin();
case ACCESSID:
return getAccessId();
default:
return super.getAttrInvokeAccessor(index, attrDef);
/**setAttrInvokeAccessor: generated method. Do not modify.
protected void setAttrInvokeAccessor(int index, Object value,
AttributeDefImpl attrDef) throws Exception
switch (index)
case ASSIGNMENTID:
setAssignmentId((Number)value);
return;
case ASSIGNMENTACCESS:
setAssignmentAccess((String)value);
return;
case VARIABLEID:
setVariableId((Number)value);
return;
case LISTVALUEID:
setListValueId((Number)value);
return;
case ORGANIZATIONID:
setOrganizationId((Number)value);
return;
case TEMPLATEID:
setTemplateId((Number)value);
return;
case AUCTIONHEADERID:
setAuctionHeaderId((Number)value);
return;
case POHEADERID:
setPoHeaderId((Number)value);
return;
case CREATEDBY:
setCreatedBy((Number)value);
return;
case CREATIONDATE:
setCreationDate((Date)value);
return;
case LASTUPDATEDATE:
setLastUpdateDate((Date)value);
return;
case LASTUPDATEDBY:
setLastUpdatedBy((Number)value);
return;
case LASTUPDATELOGIN:
setLastUpdateLogin((Number)value);
return;
case ACCESSID:
setAccessId((Number)value);
return;
default:
super.setAttrInvokeAccessor(index, value, attrDef);
return;
/**Gets the attribute value for AccessId, using the alias name AccessId
public Number getAccessId()
return (Number)getAttributeInternal(ACCESSID);
/**Sets <code>value</code> as the attribute value for AccessId
public void setAccessId(Number value)
setAttributeInternal(ACCESSID, value);
/**Creates a Key object based on given key constituents
public static Key createPrimaryKey(Number assignmentId)
return new Key(new Object[]{assignmentId});
Thanks,
SK

Any option to restrict SE16 record level access based on company code?

Hi All,
I have a requirement to restrict record level access in SE16 based on company code.
Our SAP system has two company codes. The requirement is that users of one company code should not be able to see records of other company code in SE16.
Is it possible through some exits/badis/other methods?
Thanks in advance.
Regards,
Arun Mohan

You could write a small front end that accepts the company code, applies custom authorization code for each value and retains or removes, then calls the transaction and enters the selections the user requested and that your authorization check resulting in "passing".... Of course, you'd have to block those users from "pure" SE16... I once worked in situation similar, users in one country couldn't see USA data, etc. I think someone wrote an entire new program, called by ZSE16, for that.

Imported Form and sub-form from another database. Sub-form not creating new records tied to parent form's data.

I have imported all objects from an old access db (.adp file) into a new db (.accdb). All of my data lives in sql server so I have added all the tables and views to the .accdb as linked tables. My forms all connect to data, but I am having issues
with a sub form. The sub form does not allow for creation of children records tied to the parent record the way the old db did/does.
Correct - old format .adp file (notice the empty second record in sub-form with the defaulted date of today's date):
Incorrect - new .accdb file (notice the lack of empty second record in sub-form like above):
If I click the create new record icon in the bottom of the subform, it creates a completely blank record not tied to the parent record (fields blacked out in screen shots above). When using this button all parent record fields are blank.
I have also verified the child table used in the sub-form has a valid Fky relationship to parent table used in the parent form.

Have you checked each forms 'Filter' property (in Design view) to make sure they are blank and that each forms 'Filter On Load' property to make sure it is set to 'No'? Also, you might try inserting the following commands in each forms On
Open event:
DoCmd.RunCommand acCmdRemoveAllFilters
DoCmd.ShowAllRecords
If you can open each forms Record Source and they are showing that new records are able to be entered (the new record * is showing at the bottom of the recordset), then check each forms On Load and On Open events to make sure there is no filtering.
In addition, check any macro or VBA commands behind the button that opens the main form to make sure there is no SQL filtering in the DoCmd.OpenForm command.
If one of the forms Record Source does NOT allow new records, then you will need to change that Record Source so the new record * indicator shows.
Out of ideas at this point.

Adobe LiveCycle ES4 add new and update Access Database, Non-Null failure

I am using adobe livecycle es4 and I am trying to add a new record and then update it to an Access database. However, when i press update the error tells me that i cannot have Null values and it displays a check box field name. How can i allow a null value for a check box? Because when my form is used, not all of the check boxes will be checked

You can use the resolveNode function that can catch the null value of your check box component.
Exemple:
if (this.resolveNode("NameCheckBox").rawValue == null)
//Do Something

Error adding new records in an user table

Hi
I'm trying to add a new record in an user table, and after calling the add method I get the next error message:
"Generating this document requieres numbering to be determined for the document".
I've defined my user table as Master Data, and the source code is as follows:
dim m_UserTable as SAPbobsCOM.UserTable
m_UserTable = SboCompany.UserTables.Item(UserTable)
m_usertable.Code = NewValue
m_usertable.UserFields.Fields.Item("U_FIELD1").Value = NewValue
if m_userTable.add() <> 0 then
SboCompany.GetLastError(lngError, strerror)
SboApplication.MessageBox(strerror)
end if
Thanks and Best Regards
Dani

Hi Dani,
when you create a user Table as "Master Data", this table becomes a part of a UDO (User Data Object) that you have to create too.
In the version 2004A, you don't have the possibility to enter information in these kind of table using the DI. You can only do it thru the application.
You can look at a post called "Access to UDO via DI" posted 16th December 2004
Sebastien

Automatic insertion of new record.....help......

i have done insertion of 6 field in the database..which is working good(code is below)...Now i want to do stuff that when i insert 6 field in database, then a new record also has to be insert into the database, in that new record the following changes should be done.
1)if i insert field code no ex.. 20 is inserted into the database then the a new code no 120 should be generated and inserted into database (the new code no should be started with 1, then the orginal code no will come) ex.. 10=101, 11=111, 256=1256,257=1257. The bold part is orginal record entered by the user, and the new record isnot bold.
2)Percentage field is there,ex 12%, 13% etc values will come , it calculates the percentage of credit amount field values and insert that values into the debit amount field of new record.
In my following code the code no is displayed as code, debit amount is shown as DrAmount, credit amount is shown as CrAmount, percentage field is shown as pct.
conn.setAutoCommit(false);
PreparedStatement pstmt = conn.prepareStatement("INSERT INTO gl_mast VALUES (?, ?, ?, ?, ?, ?)");
for (int i=1; request.getParameter((i==1)?"code":("code_" +i)) != null; i++){
String Code1=request.getParameter((i==1)?"code":("code_" +i));
int Code=Integer.parseInt(request.getParameter((i==1)?"code":("code_" +i)));
pstmt.setInt(1,Code);
String Description=request.getParameter((i==1)?"Description":("Description_" +i));
pstmt.setString(2,Description);
float Dr_Amt =Float.parseFloat(request.getParameter((i==1)?"DrAmount":("DrAmount_" +i)));
pstmt.setFloat(3,Dr_Amt );
float Cr_Amt =Float.parseFloat(request.getParameter((i==1)?"CrAmount":("CrAmount_" +i)));
pstmt.setFloat(4,Cr_Amt);
String Type =request.getParameter((i==1)?"type":("type_" +i));
pstmt.setString(5,Type );
float Pct =Float.parseFloat(request.getParameter((i==1)?"pct":("pct_" +i)));
pstmt.setFloat(6,Pct);
pstmt.addBatch();
conn.commit();
conn.setAutoCommit(true);
pstmt.executeBatch();plz...look at my code and solved my prob....
thanx

Whats Happening ..are u getting errors when u run thispage..what is the error..If I remember correctly...there was a similar post a couple of days ago from you....
for (int i=1; request.getParameter((i==1)?"code":("code_" +i)) != null; i++){what is the above line of code doing..U cannot access the value of i as u have done above...why dont u use two ifs..to check the values..within the for...

Xth data - updated with new records in exit- layout does not show new recor

Hi ,
I have updated Xth_data table in an exit function with new set of records. I can in debug mode in the exit function 204 records in Xth_data and after the logic 408 records. But somehow , when the layout comes up , it comes up with only 204 records instead of 408. I have populated all the key fields of xh_data with characteristic value. But still these are missing in the layout. Please let me now if you guys have come across simillar situation.
204 records are read , 0 of them were changed, 276 generated.
Thanks
JC

Hi,
Surely that the new record do not match with the selection of your package.
You should execute the function withj the trace, so you can access the full log.
Regards

11G ADF java datacontrol and displaying new records in ADF table

Hi,
In 11g I have a java class which return a list of objects and I made a data control on it. I displayed this in a ADF Table based on a ADF tree binding.
When I fire the create operation on this java data control I see in the tree binding that the new entry is created and even the table has the correct
rowcount but the new records are not displayed in the adf table. I added PPR but this not work.
Empty new classes are displayed when they are added before the page is loaded.
the only difference between a class created by ADF and initial by the adf datacontrol is that mAtrrHintsMap hashmap of DCdataRow is null and the other has 2 entries
What can it be in 10.1.3 it works
here my test data
public class Data {
private String lovLabel;
private String lovValue;
public Data() {
public Data(String lovLabel, String lovValue) {
super();
this.lovLabel = lovLabel;
this.lovValue = lovValue;
public void setLovLabel(String lovLabel) {
this.lovLabel = lovLabel;
public String getLovLabel() {
return lovLabel;
public void setLovValue(String lovValue) {
this.lovValue = lovValue;
public String getLovValue() {
return lovValue;
here the data control class
public class LovData {
public LovData() {
public List<Data> getLovData() {
List<Data> data = new ArrayList<Data>(4);
data.add(new Data ("One","1"));
data.add(new Data ("Two","2"));
data.add(new Data ("Three","3"));
data.add(new Data ());
return data;
here is the pagedef
<executables>
<methodIterator id="getLovDataIter" Binds="getLovData.result"
DataControl="LovData" RangeSize="25"
BeanClass="nl.whitehorses.model.Data"/>
</executables>
<bindings>
<methodAction id="getLovData" InstanceName="LovData.dataProvider"
DataControl="LovData" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="getLovData"
IsViewObjectMethod="false"
ReturnName="LovData.methodResults.getLovData_LovData_dataProvider_getLovData_result">
</methodAction>
<tree IterBinding="getLovDataIter" id="Data">
<nodeDefinition DefName="nl.whitehorses.model.Data">
<AttrNames>
<Item Value="lovLabel"/>
<Item Value="lovValue"/>
</AttrNames>
</nodeDefinition>
</tree>
<action IterBinding="getLovDataIter" id="Create" RequiresUpdateModel="true"
Action="createRow"/>
</bindings>
</pageDefinition>
here is the adf page
<af:panelCollection inlineStyle="width:309px; height:168px;" id="pc2">
<f:facet name="menus"/>
<f:facet name="toolbar">
<af:toolbar>
<af:commandToolbarButton actionListener="#{bindings.Create.execute}"
text="Create"
disabled="#{!bindings.Create.enabled}"
partialTriggers="table1 ::pc1:table2"/>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table value="#{bindings.Data.collectionModel}" var="row"
rows="#{bindings.Data.rangeSize}"
emptyText="#{bindings.Data.viewable ? 'No rows yet.' : 'Access Denied.'}"
fetchSize="#{bindings.Data.rangeSize}" id="table1"
binding="#{UserPreferences.table1}">
<af:column sortProperty="lovLabel" sortable="false"
headerText="#{data.lovLabel}">
<af:outputText value="#{row.lovLabel}"/>
</af:column>
<af:column sortProperty="lovValue" sortable="false"
headerText="#{bindings.Data.hints.lovValue.label}">
<af:outputText value="#{row.lovValue}"/>
</af:column>
</af:table>
</af:panelCollection>
and here some backing bean code
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
FacesCtrlHierBinding treeData = (FacesCtrlHierBinding)bc.getControlBinding("Data");
Row[] rows = treeData.getAllRowsInRange();
System.out.println("tree 1_1 "+rows.length+" "+table1.getRowCount());
treeData.refreshControl();
System.out.println("tree 1_2 "+rows.length+" "+table1.getRowCount());
AdfFacesContext.getCurrentInstance().addPartialTarget(table1) ;
hope this helps
thanks Edwin

What if you place the create button in the same panelGroup as the table?
I did a quick try and it seemed to work fine for me.
jspx code:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
    <af:document>
      <af:messages/>
      <af:form>
        <af:panelGroupLayout>
          <af:commandButton actionListener="#{bindings.Create.execute}"
                            text="Create"
                            disabled="#{!bindings.Create.enabled}"
                            partialTriggers="table1"/>
          <af:table value="#{bindings.lovData.collectionModel}" var="row"
                    rows="#{bindings.lovData.rangeSize}"
                    emptyText="#{bindings.lovData.viewable ? 'No rows yet.' : 'Access Denied.'}"
                    fetchSize="#{bindings.lovData.rangeSize}" id="table1">
            <af:column sortProperty="lovLabel" sortable="false"
                       headerText="#{bindings.lovData.hints.lovLabel.label}">
              <af:outputText value="#{row.lovLabel}"/>
            </af:column>
            <af:column sortProperty="lovValue" sortable="false"
                       headerText="#{bindings.lovData.hints.lovValue.label}">
              <af:outputText value="#{row.lovValue}"/>
            </af:column>
          </af:table>
        </af:panelGroupLayout>
      </af:form>
    </af:document>
</f:view>
</jsp:root>

HELP NEEDED: Use a new record for a customized table as a workflow trigger

Hi SAP Workflow Gurus,
Good day!
One of our requirements is to have the creation of a new record in a custom database table trigger a workflow. I read and followed the steps as indicated in this link
http://www.****************/Tutorials/Workflow/Table/events.htm
As a summary, here is what I did:
1. Created a subroutine for the custom table ZPA2003 for the create event
2. Defined this event as a trigger for the custom workflow WS90000019
3. Maintained and activated the event linkage via SWETYPV
Basically I tried following the instructions indicated on the link
Note that the entries for the custom table are created via a function module.
Now during testing of the workflow, the system was able to complete the notification message. However, when I triggered the event via creation of the entry in the custom db table nothing happened
1. Is there a way to debug/find out whether the link between the subroutine in the table and event itself are connected?
2. I also tried running the event trace to check the activities executed but found nothing.
Can you guys help me check on what I may have missed out?
Regards,

Hi All,
Basically these are the requirements for the work schedule substitution:
1. Employee enters the request via ESS (custom portal transaction)
2. Upon saving of the entry (request) in a custom table, this should trigger the workflow at the backend
3. The Manager should then receive a work item in his Universal Worklist at the MSS side of the portal
4. Upon clicking on the work item, a new screen will pop up showing the work schedule substitution details as well as an interface which will allow him to enter his/her usage decision
5. Depending on the decision, the workflow must execute the necessary notifications as well as changes in the custom and PA2003 tables
Now, we have accomplished step 1 and I am currently in the process for step 2. Now I have some queries:
1. For the Manager to view and approve the substitution details, I used two methods for each process (view and approve) since our ABAPer mentioned that this cannot be done in 1 function module. Is there a way to simplify this step or is it really valid that they need to be executed in 2 different methods?
2. As per our ABAPer, function Modules only import and export variables; they do not have the facility of say having tags on the details being displayed. Hence, if the details are 10001 (Employee Number), 10/20/2011 (Start Date), 10/25/2011 (End Date) the output would be 10001, 10/20/2011, 10/25/2011. Is there a way within the function module (or dynpro interface) to show it like this: Employee Number: 10001
Start Date: 10/20/2011
End Date: 10/25/2011
3. Speaking of dynpro applications, do I need to still develop one to allow the Manager to view and approve/reject the request via the MSS portal upon accessing the work item via the UWL? How would the work item go about calling the dynpro application? or is this even possible?
It would have been easier if the facility would not pass through workflows since it will be just direct web dynpro/ABAP calls. Having to include it as a work item in the UWL puts a certain twist to it
Your inputs are well-appreciated.
Regards,

Adding new records from time dependent master data

Hi,
i need to keep track of asset movements between costcenters. currently we using costcenter hierarchy, which is not time dependent. But i can see asset movement from one cost center to another in asset master data. if i access costcenter from asset master data report is giving wrong values, because its reading last value of the costcenter. i am using 0FIAA_C11 AND 0FIAA_C12, I need to populate extra record for that asset when it moves one cost center to another cost center, if it moved in 2nd period of current fiscal year, i need to populate two records for that specific fiscal year.
any suggestion or solution.
regards
raja

If you make cost center a time dependent attribute of 0ASSET you will be able to track the changes undergone by an asset. Anytime a costcenter changes for the asset there will be a new record that will be created and the old one will be delimited.

Writing records MS Access records from LabVIEW

I'm trying to write new records to a MS Access table from within LV. I need to use ActiveX (no chance for SQL toolkit). I'm able to create new records in the database table, but cannot write values in the fields. Can anybody help me?
thanks in advance
Giovanni Moschioni

Thanks for answer; as a matter of fact my problem is how to tell Access 'hey, I want this field of this record to be this value'. In a nutshell I'm not able to translate into LV the following statements extracted from MS Dao Help file:
.AddNew
!Name = strName
!Surname= strSurname
.Update
Thanks again for help!
Giovanni Moschioni

NEW Record in Access DB

Similar Messages

Maybe you are looking for