New Server - ZFD4 query.

We have a new Netware 6 server installed. Currently we have ZFD 3 installed
on a Netware 5 server. I intend to install ZFD 4 on the new server and shut
ZDF3 down on the old one. I'm not concerned if the inventory data is lost as
long as I have remote control over the user's PCs from the new server and it
can gather inventory data on the new server. I am concerned that the local
user accounts on the users Windows PCs are not deleted or corrupted in any
way. Does anyone have any advice to give ? Thanks for any replies.

[email protected],
> I am concerned that the local
> user accounts on the users Windows PCs are not deleted or corrupted in any
> way. Does anyone have any advice to give ? T
That is not something that happens normally when you upgrade. Have you read
the 3.x to 4.x upgrade docs?
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195

Similar Messages

Exchange 2010 Migration - Decommissioning Multi Role Server and Splitting Roles to 2 new servers - Certificate Query

Hi,
I have been tasked with decommissioning our single Multi Role Server (CAS/HT/MB) and assigning the roles to 2 new servers. 1 server will be dedicated to CAS and the other new server will be dedicated to HT & MB roles.
I think I'm OK with the moving of HT and MB roles from our current server to the new HT/MB server by following "Ed Crowley's Method for Moving Exchange Servers", my focus is on the migration of the CAS role from the current to the new server as
this one has the potential to kill our mail flow if I don't move the role correctly.
The actual introduction of the new CAS server is fairly straight forward but the moving of the certificate is where I need some clarification.
Our current multi role server has a 3rd Party Certificate with the following information:
Subject: OWA.DOMAIN.COM.AU
SANs: internalservername.domain.local
autodiscover.domain.com.au
The issue here is the SAN entry "internalservername.domain.local" which will need to be removed in order for the certificate to be used on the new CAS server, firstly because the CAS server has a different name and secondly the internal FQDN will
no longer be allowed to be used from 2015 onwards. So I will need to revoke this certificate and issue a new certificate with our vendor who is Thawte.
This presents me with an opportunity to simplify our certificate and make changes to the URLs using a new certificate name, so I have proposed the following:
New Certificate:
Subject: mail.domain.com.au
SANs: autodiscover.domain.com.au
OWA.DOMAIN.COM.AU
I would then configure the URLs using PowerShell:
Set-ClientAccessServer -Identity NEWCASNAME-AutodiscoverServiceInternalUrl https://mail.domain.com.au/autodiscover/autodiscover.xml
Set-WebServicesVirtualDirectory -Identity " NEWCASNAME\EWS (Default Web Site)" -InternalUrl https://mail.domain.com.au/ews/exchange.asmx
Set-OABVirtualDirectory -Identity " NEWCASNAME\oab (Default Web Site)" -InternalUrl https://mail.domain.com.au/oab
Set-OWAVirtualDirectory -Identity " NEWCASNAME\owa (Default Web Site)" -InternalUrl https://mail.domain.com.au/owa
I would also then set up split DNS on our internal DNS server creating a new zone called "mail.domain.com.au" and add an host A record with the internal IP address of the new CAS server.
Now I know I haven't asked a question yet and the only real question I have is to ask if this line of thinking and my theory is correct.
Have I missed anything or is there anything I should be wary of that has the potential to blow up in my face?
Thanks guys, I really appreciate any insights and input you have on this.

Hi Ed,
Thanks for your reply, it all makes perfect sense I guess I was being optimistic by shutting down the old server and then resubscribing the edge and testing with mailboxes on the new mailbox server.
I will make sure to move all of the mailboxes over before removing the old server via "Add/Remove Programs". Will I have to move the arbitration mailboxes on the old server across to the new mailbox server? Will having the arbitration mailboxes
on the old server stop me from completely removing exchange?
Also, the InternalURL & ExternalURL properties are as follows:
Autodiscover:
New CAS - InternalURL: https://svwwmxcas01.pharmacare.local/Autodiscover/Autodiscover.xml
Old CAS - InternalURL: https://svwwmx001.pharmacare.local/autodiscover/autodiscover.xml
WebServices:
New CAS - InternalURL: https://svwwmxcas01.pharmacare.local/EWS/Exchange.asmx
New CAS - ExternalURL: https://owa.pharmacare.com.au/EWS/Exchange.asmx
Old CAS - InternalURL: https://svwwmx001.pharmacare.local/ews/exchange.asmx
Old CAS - ExternalURL: https://owa.pharmacare.com.au/EWS/Exchange.asmx
OAB:
New CAS - InternalURL: http://svwwmxcas01.pharmacare.local/OAB
New CAS - ExternalURL: https://owa.pharmacare.com.au/OAB
Old CAS - InternalURL: https://svwwmx001.pharmacare.local/oab
Old CAS - ExternalURL: https://owa.pharmacare.com.au/OAB
OWA:
New CAS - InternalURL: https://svwwmxcas01.pharmacare.local/owa
New CAS - ExternalURL: https://owa.pharmacare.com.au/
Old CAS - InternalURL: https://svwwmx001.pharmacare.local/owa
Old CAS - ExternalURL: https://owa.pharmacare.com.au/
ECP:
New CAS - InternalURL: https://svwwmxcas01.pharmacare.local/ecp
New CAS - ExternalURL: https://owa.pharmacare.com.au/ecp
Old CAS - InternalURL: https://svwwmx001.pharmacare.local/ecp
Old CAS - ExternalURL: https://owa.pharmacare.com.au/ecp
Our Public Certificate has the following details:
Name: OWA.PHARMACARE.COM.AU
SAN/s: autodiscover.pharmacare.com.au, svwwmx001.pharmacare.local
From your previous communications you mentioned that this certificate would not need to change, it could be exported from the old server and imported to the new which I have done. With the InternalURL & ExternalURL information that you see here can you
please confirm that your original recommendation of keeping our public certificate and importing it into the new CAS is correct? Will we forever get the certificate warning on all of our Outlook clients when we cut over from the old to the new until we get
a new certificate with the SAN of "svwwmx001.pharmacare.local" removed?
Also, I am toying with the idea of implementing a CAS Array as I thought that implementing the CAS Array would resolve some of the issues I was having on Saturday. I have followed the steps from this website, http://exchangeserverpro.com/how-to-install-an-exchange-server-2010-client-access-server-array/,
and I have got all the way to the step of creating the CAS array in the Exchange Powershell but I have not completed this step for fear of breaking connectivity to all of my Outlook Clients. By following all of the preceeding steps I have created a Windows
NLB with dedicated NICs on both the old CAS and the new CAS servers (with separate IP addresses on each NIC and a new internal IP address for the dedicated CAS array) and given it the name of "casarray.pharmacare.local" as per the instructions on
the website, the questions I have on adding the CAS array are:
1. Do you recommend adding the CAS array using this configuration?
2. Will this break Outlook connectivity alltogether?
3. Will I have to generate a new Public Certificate with an external FQDN of "casarray.pharmacare.com.au" pointing back to a public IP or is it not required?
4. If this configuration is correct, and I add the CAS Array as configured, when the time comes to remove the old server is it just as simple as removing the NLB member in the array and everything works smoothly?
So, with all of the information at hand my steps for complete and successful migration would be as follows:
1. Move all mailboxes from old server to new server;
2. Move arbitration mailboxes if required;
3. Implement CAS Array and ensure that all Outlook clients connect successfully;
4. Remove old server;
5. Shut down old server;
6. Re-subscribe Edge from new Hub Transport server;
7. Test internal & external comms;
We also have internal DNS entries that would need changing:
1. We have split DNS with a FLZ of "owa.pharmacare.com.au" that has a Host A record going to the old server, this would need changing from "svwwmx001.pharmacare.local" to "svwwmxcas01.pharmacare.local";
2. The _autodiscover entry that sits under _TCP currently has the IP address of the old server, this would need to be changed to the IP address of the new CAS;
3. The CNAME that sits in our FLZ for "pharmacare.local" would need to be changed from "svwwmx001.pharmacare.local" to "svwwmxcas01.pharmacare.local".
4. Or rather than using the FQDN of the server where applicable in the DNS changes would I be using the FQDN of the CAS Array instead? Please confirm.
Would you agree that the migration path and DNS change plan is correct?
Sorry for the long post, I just need to make sure that everything goes right and I don't have egg on my face. I appreciate your help and input.
Thanks again.
Regards,
Jamie

BI server generating query in a different way between two instances

Hi All,
We have executed a report in dev,test instances,BI server generated query in a different way in two instances where as dev BI server is on AIX operating system(recently we migrated from windows),test instance is on still on Windows environment.
For a report below are the queries
DEV(AIX)
WITH
SAWITH0 AS (select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end )
select distinct SAWITH0.c2 as c1,
SAWITH0.c3 as c2,
SAWITH0.c4 as c3,
SAWITH0.c5 as c4,
SAWITH0.c5 as c5,
SAWITH0.c6 as c6,
SAWITH0.c7 as c7,
SAWITH0.c1 as c8
from
SAWITH0
order by c1, c6
Test(Windows)
select distinct D1.c2 as c1,
D1.c3 as c2,
D1.c4 as c3,
D1.c5 as c4,
D1.c5 as c5,
D1.c6 as c6,
D1.c7 as c7,
D1.c1 as c8
from
(select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end
) D1
order by c1, c6
If we observe test query is very simple and easy to back track but in Dev it is appending like sawwith0,sawwith1 etc..looking difficult.
Is there in any configuration to change to generate query like Test(with out SAWWITH0).
NOTE:Any how results are same in both instances.
Please help me to resolve this issue.
Thank You,
Anil Kumar.

Anil,
Are your database settings the same in both of the rpds dev and test?
Check wether you didn't change anything to the default. Open your RDP double click on the Database in the physical layer and go to Feature you can check all the settings there
Adil

Migrating Reporting Services to new Server - Subscriptions are not transfering

Hello,
I have an instance of SQL Server 2008R2 running on Windows Server 2008. It is setup to be a reporting server. There are many subscriptions that are scheduled and run on this server. We are wanting to move to Windows Server 2012 and SQL Server
2012. So, we have built out a new VM and I have exported from the current server the ReportServer and ReportServerTempDB and have imported them to the new server. I have resolved the one Orphaned user that happened and went to look for the subscriptions
so that I could disable them so they wouldn't run. I could not find any.
select * from msdb.dbo.sysjobs where enabled = 1 and category_id = 100.
no rows...
I had read from other posts to let it sit for a few days and they will appear. I have waited 2 weeks.
So, what am I missing? I would prefer to do a clean install and migrate the data over rather than upgrading the OS and SQL.
Thanks

Hi Sql Dude,
Per my undersranding that you can't find any informamation related to the subscription in the sydjobs table after migration, right?
You issue can be caused by many factors.Please check details information below:
Please check if you can see all the subscription in the report manager and can create new subscriptions. The ReportServer database used by SSRS to store the subscriptions maintains a record of the subscription owner (as well as audit fields) which track
the user accounts that have created/modified the subscriptions.
If you can't see subscription on the report manager and can create new subscriptions, the issue can be caused by "My subscriptions" had been created on the original non-domain server(Local User account). Therefore, once the instance was migrated
to a new server on the domain, said Local User was no longer available. Every user with access to the ReportServer database has an entry created in the Users table and a unique GUID generated.
To work around the issue, you can do a SQL Update query to changed the OwnerID and ModifiedByID fields on the Subscriptions table to relate to the GUID of the equivalent user on the domain.Tip:
Change the Owner of SQL Reporting Services Subscription
If you can see all the subsription on the report manager but can't find any job, please try to edit and update the subscription to see if it will recreate the job again and please also try to provide more details information in the log file to see if you
got some error message, the path like:
C:\Program Files\Microsoft SQL Server\MSRS11.SQLEXPRESS\Reporting Services\LogFiles
If above didn't help, please reference to the similar thread below:
Can't access SSRS 2008 R2 subscriptions after migration
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Why index creation is slower on the new server?

Hi there,
Here is a bit of background/env info:
Existing prod server (physical): Oracle 10gR2 10.2.0.5.8 on ASM
RAM: 96GB
CPUs: 8
RHEL 5.8 64bit
Database size around 2TB
New server:
VMWare VM with Oracle 10gR2 10.2.0.5.8 on ASM
RAM 128GB
vCPUs: 16
RHEL 5.8 64bit
Copy of prod DB (from above server) - all init param are the same
I noticed that Index creation is slower on this server. I ran following query:
SELECT name c1, cnt c2, DECODE (total, 0, 0, ROUND (cnt * 100 / total)) c3
FROM (SELECT name, VALUE cnt, (SUM (VALUE) OVER ()) total
FROM v$sysstat
WHERE name LIKE 'workarea exec%')
C1
C2
C3
workarea executions - optimal
100427285
100
workarea executions - onepass
2427
0
workarea executions - multipass
0
0
Following bitmap index takes around 40mins in prod server while it takes around 2Hrs on the VM.
CREATE BITMAP INDEX MY_IDX ON
MY_HIST(PROD_YN) TABLESPACE TS_IDX PCTFREE 10
STORAGE(INITIAL 12582912 NEXT 12582912 PCTINCREASE 0 ) NOLOGGING
This index is created during a batch-process and the dev team is complaining of slowness of the batch on new server. I have found this one statement responsible for some of the grief. There may be more and I am investigating.
I know that adding "parallel" option may speedup but I want find out why is it slow on the new server.
I tried creating a simple index on a large table and it took 2min in prod and 3.5min on this VM. So I guess index creation is slower on this VM in general. DMLs (select/insert/delete/update) seem to work with better elapsed time.
Any clues what might be causing this slowness in index creation?
Best regards

I have been told that the SAN in use by the VM has capacity of 10K IOPS. Not sure of this info helps. I don't know more than this about the storage.
What else do I need to find out? Please let me know - I'll check with my Sys Admin and update the thread.
Best regards

New server make many broadcast traffic for NetBIOS wpad

From 1 month ago I finished transferred from old server 2003 to new server 2012 with new machine all role , DHCP and sharing file are transferred successfully and I use netdom computername to keep the name for the new server as a same name for the old server
and all thing in my network is good but I feel that there are some slow in the network and some router in my network frozen from time to time a need to restart
I use Wireshark to monitor my network and I found that my new server make many broadcast traffic for NetBIOS wpad , the server make more than 500 nbns broadcost per second .
No.
           Time
                        Source
Destination
Protocol    Length
Info
384       134.075102
192.168.15.100        192.168.15.255
nbns         92
name query nb wpad<00>
Where 192.168.15.100 is my server IP.
all server and workstation have a antivirus and latest update of windows and the server not connect to internet
Can anyone help me to solve this problem.

I found the problem and i would like to share it with other
the problem from my antivirus Kaspersky Endpoint security 10 when i close the program the broadcast stop and all traffic return to normal
i open antivirus again and disable the using of proxy from it and now its work good.
Thanks

PreparedStatement doesn't work on new server

I am porting my app to a new server and SQLException errors are appearing. For example, r.start is a datetime column and a select where clause that works on the old server is:
WHERE r.start < {f '2009-04-01'}
on the new server, I get an SQLException message from a PreparedStatement:
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1
Other properties are
SQLState: 42000
Vendor code: 1064
The statement works when I query the MySQL database directly.
I figure it must be a different version of JDBC, but I can't figure out how to obtain the version being used.
Any ideas?

You mean that you were using an older version of MySQL and now are using a newer version.
Have you considered using SQL that is more standard and prepared statements as well?
Different version of JDBC? JDBC itself is a collection of interfaces and some framework code used to load the driver and proxy the calls. So it isn't JDBC.
Perhaps you meant the MySQL driver? If so you are having a problem finding the correct version of that to download?

Upgrading report from CR8.5 to CR10 and connecting to new server

Post Author: jnicholsDME
CA Forum: Data Connectivity and SQL
We have numerous reports (50+) with various subreports that are used by our enterprise accounting system (MAS500). We recently upgraded to a new version of this program. The upgrade required that we upgrade the reports to CR10 from CR8.5 in order to render them in the program's runtime engine. All of these reports now live on a new server and are pointed to a SQL2005 db on that new server. I had to reset the datasource (we're using an ODBC connection) on all of the reports to point them at the new server and database. However, the SQL queries seem to still reference the old database (which was on the old server). The reports run fine inside of the accounting system, however, if we unplug the old server the reports take approimately 1 minute, compared to 3 seconds with the old server plugged in. Even editing the report in crystal, it takes approximately 1 minute to open the report in Crystal designer if the old server is unplugged (as opposed to 2 seconds with it plugged in). Despite setting the datasource it seems as if something in the report is still trying to resolve itself to the old server. Another strange thing is that even when the old server is turned on, the sql database the reports previously referenced is OFFLINE. Despite reset the datasource, when attempting to verify the database the reports bring up a dialog saying a table from the old database can't be found, and this reference is still visible in the SQL query inside of crystal. Unfortunately, I can't edit this query, or I'd probably be able to resolve my issues. Any ideas? Rewriting these reports would take weeks.

Post Author: ejthunder
CA Forum: Upgrading and Licensing
Hello,
What edition of Crystal Reports 10 do you have? You have to have CR 10 Developer or Advanced Developer. CR 10 Professional and CR 10 Standard are not development level products and do not install development components into VB6.
Open CR 10 and go to Help > About. What is the edition description at the top? If it doesn't say CR10 Developer or Advanced Developer you have your reason.
I hope this helps!
EJ

Migration of old server to new server...how??

Hi all...
I am here to discuss about some information to how migrate a server from old machine to a new server??
can someone provide some good links??
i did searched on google but didnt quite understood the whole thing.
Currently server is sql 2005 and in new server also i want the same .

hi
Refer this kb article for moving databases from one server to another server
http://support.microsoft.com/default.aspx/kb/314546
There are 4 ways to move/copy a database from one server to another server using SQL Server Tools.
i) Detach the database from the old server and attach it in the new server. This is purely offline operation and it moves the database instead of copying it.
Refer http://msdn.microsoft.com/en-us/library/ms190209.aspx : how to use attach/detach database in SQL Server Management Studio(SSMS)
ii) Back up the database in the old server and restore it in the destination server. This can be performed during online and it creates a new database in the destination server.
Refer http://msdn.microsoft.com/en-us/library/ms187048.aspx for more information.
iii) Using copy database wizard in SQL Server Management Studio.
Select the database in the source server in SSMS
Right click ->Tasks->Copy Database Wizard to launch the copy database wizard.
Enter the source and destination credentials and select either attach/detach or SMO type
click next and you can schedule or run immediately
Click finish to execute it
Refer http://msdn.microsoft.com/en-us/library/ms188664.aspx for more information.
iv) The last type is to generate the create script using Generate Script Wizard (SSMS) and execute it in the destination server.
Select the database in the source server in SSMS
Right click ->Tasks->Generate Scripts Wizard to launch the wizard.
Select the various scripting options needed and select the objects needed to generate the scripts for them. Make sure script data = true in the scripting option to generate script for data as well (INSERT statements)
click next ->next and finish to generate the script (new query window or clip board or file)
connect to the destination server and create the new database in it.
Click new query window and paste the script generated using GSW above and execute them with the destination database context.
Refer http://msdn.microsoft.com/en-us/library/ms181421.aspx for more information
v) Using Transfer Object in SMO
Sample code:
ScriptingOptions so = new ScriptingOptions();
so.ScriptData = true;
Transfer t = new Transfer(db);
t.CopyAllObjets = true;
t.options = so;
t.TransferData();
Note: Transfer class is available in Microsoft.SqlServer.SmoExtendedClass.dll (SQL Server 2008)
or Microsoft.SqlServer.Smo.dll (SQL Server 2005)
There are various member variables to be configurable. Also ScriptingOptions class object can be created and assigned to the transfer object as well.
set ScriptData = true in order to transfer data also. It copies the destination instead of moving the database
Refer http://msdn.microsoft.com/en-us/library/microsoft.sqlserver.management.smo.transfer.aspx for more information.
Does this helped?
Thanks
Sreekar

Add New Server in Farm

Hello Friends, I have a below query related to adding new server in existing Production SharePoint 2010 Farm.
1. Can I add server during Produciton Hours?
2. What all changes will happend in existing configuration once server is added.?
3. Is there any risk associated with this actvity?
4. Can I also remove new server from Farm?
5. If I don't know Parser text password, then what happen?
It will be great help to me.

Technically yes - but never recommended. Don't forget to add it in load balancer.
SharePoint config DB and App server will be updated about new member and will work acordingly
As such no, unless some extra steps are not performing apart from listed.
Yes, it can be done
I beleive you mean to say "Pass Phrase" password when you say "Parser text password" -
>> You can't add/delete any server in that farm without it. That is the purpose of it.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server.
Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one?
Old Server:
SBS2008 running Exchange 2007
New Server:
Server 2012
Exchange 2013
Any help is appreciated!

Hi Dave,
It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
you in the past).
For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model. In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
up to 2 Virtual Machines on same host).
There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration.
You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration. But the high points are in here. If it looks
like something you would be comfortable with then you should research more.
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
and migrate your workstations out of old domain into new domain. Whether this is more or less work at your workstation count is dependent upon a lot of variables.
If you have more questions about the process, update the thread and we'll try to assist.
Hopefully this info answered your original question.
Cheers,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

7.5 SP3 New Server - Runtime Error on Web Page

Hi experts
I have added a new web server to an existing BPC installation.
The environment is load-balanced, 7.5 SP3, built on windows server 2003 SP2, with SQL 2008 SP1
I used the prerequisites:
Xceed v6.5
Antixscript v3
However, when I try to open the /osoft page directly on the new server, I see the error shown at the bottom of this page.
I checked the DLLs against those on the 2 working servers, and they are the same.
I have copied the antixscript dll from system32 to websvr\bin, as I have seen similar problems before and this has resolved it.
Unfortunately, it hasn't worked this time.
I have also checked that I can log my PC (windows 7, IE8) into either of the existing web servers, and they work fine
I have also opened the web site directly on the new server and that works fine (although it offers nothing but Web and Admin, as Excel is not installed)
I really need to get this server up for user testing first thing in the morning (UK time)
Does anyone have any suggestions?
Thanks
ERROR DETAILS:
Server Error in '/OSoft' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

Quick update:
I'm removing BPC and reinstalling, as the issue definitely lies within BPC and/or its associated Web Site.
I know this as I am able to successfully connect from a client PC to to Reporting Services website.
If anyone has any suggestions, now would be a great time to make them known.
Thanks again

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

No data in web analytics report after moving to new server

Hi,
I have a Sharepoint 2010 portal, we need to move that portal to a new server.
For this, I took the backup of the Web Analytics Reporting db and Staging db and restored them in the SQL of new server. Then, I created new Web Analytics Service Application on the new server with reference to the restored databases.
Now, when I go to check Web Analytics report, there is no data in it.
Is this because the url of my portal is now changed? Will I be able to get all my data when I change the AAM of new server to the old portal's url?
Kindly help

Hi,
I wonder if Data exists starting from the date of finishing moving. If not, then please make sure Web Analytic is working in your environment.
You could also check ULS log for relevant error information.
Here is a similar issue for your reference:
http://sharepoint.stackexchange.com/questions/42881/web-analytics-in-central-admin-not-showing-all-data
More information:
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
http://blogs.technet.com/b/manharsharma/archive/2012/10/13/sharepoint-2010-web-analytics-troubleshooting-reporting-db.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Move portal from one server to a new server

We had a hardware crash, and the server is not recoverable. We restored everything to a new server with a new host name. That is the only thing that has changed. I thought i found all the areas where the old host name was in the properties files and in configtool.
When I log into the portal, and look at System Managment - Administrator - Systems, its shows me the correct name and server, when I click on it, it says my instance name and id, with the incorrect (old server name). Where is this value stored?

trial and error i came up with a doc and also used the java copy doc sap has on the portal

New Server - ZFD4 query.

Similar Messages

Maybe you are looking for