New update Lion Server 10.7.3. Apple app Virtual Host setup.

Hi
I have 15 domain purchased from Goddady.
All these domain [Goddaddy] have changed/redirect to my personal IP public.
In MacMini server all domain running ok. When I enter any of these domains in the Safari , the answer in the macmini server "always" presenting the same apple website.The same apple web in the folder sites/default.
Ok.
I created a folder diferent for each one [domains] of them....... but...
When enter in Safary www + mydomain1.com the anser is different than mydomain1.com... . Diferent folder but same domain.
I want that www.mydomain1.com or mydomain1.com go to the same folder. No other folder.
All tests are being conducted from the outside. From another computer outside the local network.
Sorry for my very very very bad english !
Thanks
Alex

This is my router setup NAT port :
Application
Protocol
Source Net
Port from
IP Address
Port to
Enable
TCP
UDP
Both

Similar Messages

Why is Lion Server not available in UK App Store

I am trying to upgrade my old Mac Mini (running Snow Leopard Server) to Lion + Server
When I try to install Lion, it reports Lion Server must be present before installation starts.
So I go App Store and in my purchases there is Lion Server. It reports 'Requires OS X 10.7'.
If I click on the link 'Requires OS X 10.7'. App Store takes me to Mountain Lion app.... Grrr....
If I click on OS X Lion Server (in my purchases) the App Store says. 'The item you've requested in not currently available in the UK Store'.
I see Lion Server on the US App Store but not the UK one.
Why is Lion Server removed from the UK App Store?

A further update to this. I can still download Lion Server (from my purchases list) on a machine running Lion.
But I cannot download Lion Server (from my purchases list) on a machine running Snow Leopard Server!!!!

HT3951 I uploaded the new update on my iphone and now my app purchaes are not on my phone. How can I get them back

I uploaded the new update fir the Iphone. Now all my apps I have purchased are gone and not showing on my phone. Can someone help..

Put the device in DFU mode (Google it) and restore.

New update how to play music on apple tv

I just updated my iPhone 4 and now can't figure out how to play music or videos on my apple tv

iPhone 4 can AirPlay audio just fine, I'd forgotten that it can't do screen mirroring. It's been so long since I had my iPhone 4 but I'm certain that some apps will allow video output over AirPlay (which is not the same as screen mirroring). The stock iOS Photo and Video apps could stream pictures and video to ATV, but true mirroring of everything you see on the screen is not supported on iPhone 4. It isn't iOS 7 that took away this capability, it is a capability that has always been limited with iPhone 4 (and earlier).
If you are sure that your old 3G can output video over AirPlay, which specific apps? Those same apps should work on the iPhone 4, even with iOS 7.

HT1925 new update for itunes failed. "Service Apple Mobile Device failed to start. Verify that you have sufficient priviledges to start system services.

Service Apple Mobile Device failed to start. Verify that you have sufficient priviledges to start system services.
This is the message I am getting. Why can't I get itunes to load properly??

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

4s bricked after trying new update, stuck with black screen with apple logo how can i fix this

Update bricked my 4s
phone , stuck with black screen with apple logo ..
how can I fix this

Greetings r1042,
Welcome to the Apple Support Communities!
I understand that your iPhone is not booting up past the Apple logo. In this situation, I would recommend working through the troubleshooting steps located in the attached article.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Have a great day,
Joe

Updated Yosemite and none of my Apple apps will open

After updating every Apple based app will not open. Safari, App Store, iTunes, and even Terminal. I don't know what do since I can't even open App Store to reinstall anything.

My second paragraph was supposed to be: I've looked at similar issues people had when upgrading to Lion, but none of the solutions have worked.

After the new update it wont let me open an app

last night i purchased Loopy HD and this morning i updated to 8.2 and now loopy hd wont open?

Hi kryptonmusic,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like an app you installed will not open. I would recommend that you read this article, it may be able to help the issue.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Cheers,
Mario

After update to 10.5.1 most Apple apps crash

I just updated to 10.5.1 and tried to restart mail. It crashed. I tried it a number of times and it crashes, get the menu up but no mail boxes appear before it crashes.
I tried to look at crash log in console.app and it crashes, puts up menu then crashes.
Decided to repair permissions and Disk Utility does the same thing, crashes with out really getting started.
Firefox runs normal - that's where I'm posting from.
Tried restarting, didn't help. Reset the P-Ram and have the same problem.
I had about 4 firewire drives connected, so I disconnected them and rebooted. Still can't run mail, console, disk utility. Haven't tried any other apps yet.
At my wits end - any ideas what to try?
Fred

OK, I got everything working again.
I downloaded the standalone 10.5.1 installer (all 110 megs of it) and reinstalled 10.5.1. I had installed from software update before.
Thanks,
Fred

Is SSL and multiple websites possible with Lion Server?

this is the obligatory apology from a nub here....
I have not been a sys admin since the days of NT 4.0.
I like to think that "hey, i might need a touch up here and there, but I think I can find my way around..." Wrong.
I have been searching, and reading and searching and reading, and trying everything I can think of.. and I CAN NOT figure out how to get mutliple websites working with Lion Server, using self signed certs 1 for each of my subdomains.
Has anyone, anywhere (thank you google for returning searches to me from 2004?!?! More puzzled confusion....) posted a step by step guide yet???
I have a mac mini, and I have two domain names that are resolving to my exterinal interface on my router just fine, and I have tried what I thought was
every different possible combination of voodoo, magic, 00000...MoreTestingNeeded.conf, and all the other tricks.
Is it possible to get ssl and multiple websites working with one IP address?
Thanks...

Thank you very much for your time and input. My birthday was fantastic! Thanks for asking.
I found out about SNI while researching an error I was getting in the log. I really never found any definitive "this is what you need to do", so I was going to get back to it later.
You probably know this, but Lion Server breaks out all of the virtual hosts into seperate documents in the "sites" directory. All I do is I launch the server.app, and in the web component, I enter the name of the website that I want to resolve to my server, and I give it the path to the docs. Thats it. There is no DNS configuration to speak of, on my part, and I don't believe that its necessary (?) to touch the httpd.conf file at this point yet either, even though I think I hear others saying you do. (I have no issues with getting into the file and making any changes, I just thought it was interesting.)
I am still trying to figure out how a user is supposed to add any other types of services LIKE ftp, etc. I know and use the server admin tools, but I have found that the app really does do its job in terms of creating all the dns records for resolving the sites you create. I sure hope its not just using the host file, is it? I never see any additional files in the DNS manager, for any of the subdomains. Where are they?
Here is the contents of what appears to be the first file read, that is for SSL enabled sites:
``````````````````````````````````````````````````````````````````
This is "0000_any_443.conf:"
`````````````````````````````````````````````````````````````````
## Default Virtual Host Configuration
NameVIrtualHost *:443
<VirtualHost *:443>
ServerAdmin [email protected]
DocumentRoot "/path/to/the/docs"
DirectoryIndex index.html index.php /wiki/ default.html
CustomLog "//log" cmbndvhst
ErrorLog "/"
<IfModule mod_ssl.c>
SSLEngine On
SSLCipherSuite "SOMEGARBAGEIDONTKNOWIFISHOULDSHAREORWHAT"
SSLProtocol -ALL +SSLv3 +TLSv1
SSLProxyEngine On
SSLCertificateFile "/sslcerts/certs/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXXX.cert.pem"
SSLCertificateKeyFile "/sslcerts/certs/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXX.key.pem"
SSLCertificateChainFile "/path/*.DOMAIN.COM.XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.chain.pem"
SSLProxyProtocol -ALL +SSLv3 +TLSv1
</IfModule>
<Directory "/Path/To/The/Docs/XXXX/SDFSDD">
Options All +MultiViews -ExecCGI -Indexes
AllowOverride None
<IfModule mod_dav.c>
DAV Off
</IfModule>
</Directory>
Include /httpd_passwordreset_required.conf
</VirtualHost>
```````````````````````````````````````````````````````````````````````````````` `````````````
So.. my questions are:
Where in the .confs do I add what I need from your above items? Would it go each of the site docs that I need? I am really not sure what apple is doing here.
I have 4 domain names resolving to my server right now, and subdomains to each of the domains. So there are a total of about 10 "site" docs, not a big deal to change each, I just wonder if Lion overwrites these docs with each refresh or what? Also, If I try to add a third .com right now it breaks the whole site.
(Out of conversation, but I just remembered this. I just had to "quit" out of the server.app.) When installing the directory server, it hangs on "getting certificates". The spinning wheel (not the rainbow collered one, but the black one by the words "Getting Certificates") just sits there and spins. I finally just hit the red X and relaunch server.
Lastly, you meniton importing the key. I am using the key manager within the server app. I am not sure where and how I would make the cert and key you are referring to for the importing? I have tried to use the key manager in the OS, but I am not sure of the relationship between that key manager app, and the key manager within the server.app. I have tried to create certs in the keymanager in the OS side, but I do not know how to get them to show up for use in the keymanager in the server.app.
BTW: Thanks. Thanks for the help. I really appreciate it.

Brand New Bluetooth Keyboard doesn't pair at startup on MAC Lion Server

Hi,
Just got a new Mac Lion Server Mac Mini and went to set up last night.
Apple logo and chime comes up. Then the screen to turn on Bluetooth Keyboard and Magic Mouse comes up. I turned on the power on the mouse and keyboard. The keyboard doesn't pair and the mouse does. As soon as the computer realizes the mouse is connected, it moves on to the setup screens (username, server setup etc.) and doesn't care that the keyboard is not set up yet. Of course, since I cannot type usernames etc. for the server, I get stuck.
I rebooted (hard power shutdown) several times in the hope that one time (accidently) the keyboard would be picked up but no such luck.
My PS3 recognized the Apple Keyboard so it's not the keyboard.
I didn't have a USB keyboard around so I have to wait till tonight to try to set up. I have a couple of questions.
1. Anything with Mac Mini defective? Is it something for me to worry about?
2. After I use the USB Keyboard, will my system recognized the Apple keyboard and keep it memorized. I don't have a problem doing a one time setup in this fashion, but if it continues then I'd like to nip it in the bud.
3. Should I take it to the Apple store?
Thanks for all you help.

This is an all too common issue. It happened for me as well. I don't think there's anything defective on your mini. I used a wireless keyboard (USB) to complete the setup. Once I was in Lion, I paired my Apple BT keyboard and haven't had a problem since.
http://forums.macrumors.com/showthread.php?t=1210004

Out of office Relpy for apple Mail on Mountain Lion Server

We just recently switched our server from Lion to Mountain Lion and now we can not figure out how to create and launch an Out of Office Reply for Apple Mail on the new Mountain Lion Server. I have searched the internet for an aswer and/or instructions on how to do this and haven't found any.
As anyone figured out how to create and launch an Out of Office Reply for Apple Mail on the new Mountain Lion Server?

Eustace - Thanks for taking a crack at it! I saw this same post as well but it doesn't answer my question about how to create and launch an Out of Office Reply for Apple Mail on the new Mountain Lion Server?
I'm not looking to create an out of office rule on my computer but on our Mountain Lion Server like we used to be able to do on Lion Server.

Lion server SUS not responding/weird behavior

Hi all,
I've a new mini Lion server set up and updated to 10.7.4. Tested most of the services fine and decided to set up its software update service for our Macs in the office. I followed the instruction scattered around on the internet and used Server Admin to set up the SUS. After a few days it is still downloading some old packages (we have mostly Leopard clients) but I see that a lot have been downloaded and enabled. So I went ahead and try to deploy the service to our Macs.
When I use the URL Apple suggested "http://su.domain_name.com:8088/index.sucatalog", my clients said my server wasn't responding and that I need to check my network connection. I searched around and realized it happens to lots of people with Snow Leopard server upgrading to Lion and some people suggested that we should point the URL to "http://su.domain_name.com:8088/catalogs.sucatalog" and I tried that and it seems to be working on one of my Lion, well at least there weren't any error, but since all my Lions are updated, it just said the computer is up to date. I thought it worked and decided to upgrade one of the Leopard to Snow Leopard.
After updating to Snow Leopard, the Mac obviously needed a lot of updates. Since it is a managed client, I had no problem depolying the SUS to it with Workgroup Manager. After a restart, I tried doing the software update thing and it successfully connected to my Lion server (because there is my server URL on the window title) and in a second or so it found some updates and showed me the usual "show detail, not now, install" prompt but before I had a chance to click anything, an "attached prompt" pop up from the title of the "show detail, not now, install" prompt telling me that the computer is up to date and all I can do is click the "quit" button which closes both prompts together.
So now I'm painfully trying to update that Snow Leopard from Apple servers which just the OS X combined update alone is going to be like 3 hours. What did I do wrong with the SUS? What can I do/test to solve this problem?
Any help would be great! Thanks!!

I figured it out and have posted all the details on my blog:
http://linsec.ca/blog/2012/08/23/software-update-service-on-os-x-lion-serve/

Lion Server setup & Time Capsule

Greetings,
I am new to lion server so please bear with me. Some of my question me seem dumb to some of you. But to me the only dumb question is one not asked. So please bear with me.
Server and time capsule will both do NAT, DHCP. Which should I use for the network Server or Time Capsule. I am connecting with a Brighthouse cable modem with a Dynamic IP. I have the Time Capsule in Bridge Mode with a static IP 192.168.0.6. The server is Static with 192.168.0.5. Brighthouse wireless is disabled as I like the time capsule wireless. Time capsule is providing WI-FI. Brighthouse router/Modem provides the Router at 192.168.0.1.
I have a domain name abc.net. Should I set up lion server first and then set up Time Capsule after it is working? Do I set this up as a .local, .private or .net account during server setup? I want to be able to get to my computer from my domain name and handle my mail.
I set this up once and it worked for about 2 hours. After that it would never see my computer. So I am setting up server again but wanted to see if I could get a little first time guidence this time. I also signed up with DYNDNS for DNS updating and that just seemed to throw a whole new batch of problems in.
So any help would be great... Not dumb with computers, but new to apple servers. And I don't do geek well!!
I think all the IP numbers, what I need to change on Netfirms to get to my computer get me confused in the setup.
Thanks

Server and time capsule will both do NAT, DHCP
Sure.
Which should I use for the network Server or Time Capsule
Why do you think you need to use either of them?
Ideally, you should have ONE device on your network running NAT, and ONE device running DHCP.
From your description it sounds like your Brighthouse router is running NAT therefore there is no need to run NAT anywhere else.
The chances are that the Brighthouse router is also running a DHCP server for your LAN, therefore there is also no need to run DHCP off the Time Capsule or the Server. You've already got those bases covered.
So, at least without more information, I'd be inclined to say: neither.
Should I set up lion server first and then set up Time Capsule after it is working?
Probably. It depends on what your plans are for the Time Capsule. If you're using the TC as a wireless base station then it doesn't need to be running until you're ready to connect wireless clients.
If you're using the TC for backup, you don't need it until your server and/or clients are setup and ready to backup.
Since the TC is not (as per the above) running either NAT or DHCP, there's not much else to do with it.
So focus on the server.
Do I set this up as a .local, .private or .net account during server setup?
That's entirely up to you, although there are a couple of options. First off, though, realize that there is no, zip, nada connection between the hostname you use on your internal LAN and any public domain. It's 100% valid for your server to be called foo.bar while serving web content for abc.net and getting email for xzy.com, all at the same time.
Personally, I tend to set them the same (e.g. abc.net in this case), but others will recommend a different approach. It's largely personal preference.
I want to be able to get to my computer from my domain name and handle my mail.
If you're talking about getting to your computer/mail from an external locale, that's 100% down to DNS and completely independent of what the server thinks its own name is.

Simple guide to Migrate SL Server Wiki 10.6.8 to Lion Server 10.7.2

These instructions assumes that you already have the Wiki server functional on the new OSX Lion Server 10.7.2 and that you are logged in as a system administrator.
On the SL Server, browse to \Library\Collaboration and right click on the Collaboration folder and click "Get Info"
Scroll all the way to the bottom and expand "Sharing & Permissions"
If the Lock icon shows to be locked, click it and enter an Administrators password associated with the user account you are logged in under. Make sure the permissions for "Everyone" are set to "Read & Write". Then click on the small Gear icon below that and select "Apply to Enclosed Items". It will ask you if you are sure, tell it yes.
Now copy the Collaborations folder to the new Lion Server. Create the following directory to save the files too. \myoldwiki It will probably ask you to authenticate making a new folder at the root of the drive. So if prompted, tell it to allow and enter your administrator password is prompted. So now you have \myoldwiki\collaboration at the root of your new lion server.
Open Safari and browse to http://localhost on your Lion Server to verify that your existing server is working. If you get the "Welcome to OS X Lion Server" page with several icons for My page, Updates, Wikis, People, & Podcasts then your server is working. If not, see "Setting up OS X Lion Wiki Server". (An article that has not yet been written-Soon to follow)
If you click on Wikis, and if this is a fresh install, you will not see any wiki pages listed. On the top right of the web page, click on the + sign to create a new wiki. You can name it Test Wiki like I did and then create the page. Once created, go to it to make sure that its there.
Once your new Wiki server is confirmed to be functional, open terminal and enter the following command:
sudo wikiadmin migrate -r /myoldwiki/collaboration
Then press Enter/Return. Enter your users password if prompted. (Remember, passwords do not use echo in terminal so you will not see your password as you type it. Press Enter/Return again and you should see something similar to the following:
2011-12-18 10:50:18.315 wikiadmin[5033:307] Updating schema...
2011-12-18 10:50:18.324 wikiadmin[5033:307] Schema updates completed.
2011-12-18 10:50:18.326 wikiadmin[5033:307] Migrating...
2011-12-18 10:50:18.899 wikiadmin[5033:307] Migrating known users
2011-12-18 10:50:18.921 wikiadmin[5033:307] Generating placeholders for all known pages and wikis
2011-12-18 10:50:29.054 wikiadmin[5033:307] Found 7 pages belonging to 6 wikis and 2 users.
2011-12-18 10:50:29.057 wikiadmin[5033:307] Migrating project '(Wiki Page 1 Title Here)' (1 of 6)
2011-12-18 10:50:39.137 wikiadmin[5033:307] Migrating project '(Wiki Page 2 Title Here) ' (2 of 6)
2011-12-18 10:50:49.282 wikiadmin[5033:307] Migrating project '(Wiki Page 3 Title Here) ' (3 of 6)
2011-12-18 10:50:59.350 wikiadmin[5033:307] Migrating project '(Wiki Page 4 Title Here) ' (4 of 6)
2011-12-18 10:51:09.475 wikiadmin[5033:307] Migrating project '(Wiki Page 5 Title Here) ' (5 of 6)
2011-12-18 10:51:19.635 wikiadmin[5033:307] Migrating project '(Wiki Page 6 Title Here) ' (6 of 6)
2011-12-18 10:51:29.666 wikiadmin[5033:307] Re-scanning 0 pages for pasted image/attachment URLs
2011-12-18 10:51:29.669 wikiadmin[5033:307] Copying content to real tables...
2011-12-18 10:51:29.942 wikiadmin[5033:307] Destroying migration entity and scratch tables...
2011-12-18 10:51:30.295 wikiadmin[5033:307] Done
2011-12-18 10:51:30.304 wikiadmin[5033:307] Importing user preferences
2011-12-18 10:51:40.311 wikiadmin[5033:307] Rebuilding search index...
2011-12-18 10:51:50.724 wikiadmin[5033:307] Done
2011-12-18 10:51:50.726 wikiadmin[5033:307] Migration complete
Depending on the size of your wiki on SL Server, and depending on how many pages and attachments you have installed on it, this process could take anywhere from several seconds to several minutes. Also your entry may vary from mine above depending on how many pages you have as well. I currently only have 6 pages as you can see. Overall, the end result is what you want to see: "Migration complete". This is a very good sign.
If you get a lot of errors like i did my first time trying to do this, I found that i forgot to turn on and verify that my new Lion Server web server and wiki page were fully functional prior to starting the migration. So if you get several errors that look similar to this.......
2011-12-18 01:23:52.160 wikiadmin[2930:307] *** Terminating app due to uncaught exception 'PGCConnectionError', reason: 'could not connect to server: No such file or directory
          Is the server running locally and accepting
          connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"?
*** First throw call stack:
          0   CoreFoundation                      0x00007fff915d6286 __exceptionPreprocess + 198
          1   libobjc.A.dylib                     0x00007fff958d9d5e objc_exception_throw + 43
          2   PostgreSQLClient                    0x0000000110038349 -[PGCConnection init] + 0
          3   PostgreSQLClient                    0x0000000110038425 -[PGCConnection initWithInfo:] + 157
          4   PostgreSQLClient                    0x0000000110037f8a +[PGCConnection connectWithInfo:] + 47
          5   wikiadmin                           0x000000010ff0db1e wikiadmin + 31518
          6   wikiadmin                           0x000000010ff2248f wikiadmin + 115855
          7   wikiadmin                           0x000000010ff0824c wikiadmin + 8780
          8   wikiadmin                           0x000000010ff07ba4 wikiadmin + 7076
You need to check your web server and wiki settings again.
Once everything is complete, you will need to go into your Server app on Lion Server and turn off the web server and also the wiki server. After about a minute or so, restart the web server then the wiki server and give it about 30 seconds or so to completely come back online. Now browse to http://localhost on the Lion Server and you should once again see the "Welcome to OS X Lion Server" page. Click on wikis and you should see the list of wikis you imported as well as the test wiki you created earlier. This will confirm that the files have been truly copied to the proper location for wikis on the new Lion Server.
At this point, your old wiki pages are ready to be used on your new OS X Lion Server.
There is a drawback with this process. Since you are moving ONLY the wiki database over to the new machine, all of the original users and groups is not transferred. As you can see i have 6 wikis and 2 users. This process doe not import the users and their configurations over to the new server. That process is completed by "Exporting" the "Server Admin Settings" & "Service Settings" from the SL Server "Server Admin" and importing them in the reversed fashion on the new Lion Server using Server Admin on the new server. This, however, is for another tutorial yet to be written. Mostly because i have yet to do it.
Good Luck.....
Isaac-in-Texas
NOTE: If you find an error in this posting, keep in mind we are all human and all make mistakes. Shoot me an email and i'll see if i can get it corrected.
Proud Owner of.....
2011 MabBook Pro * 2.3Ghz i7 * 16GB 1333 Ram * 750GB HDD Internal
2008 iMac 21.5" * 3.06Ghz Core 2 Duo * 16GB 1067 Ram * 1TB HDD Internal * Mercury Elite Pro 5TB RAID 5 External
iPhone 4 32GB
iPhone 4 8GB (Wife)
iPhone 3G 16GB (Spare)
iPad 32GB 1st Gen
iPod Touch 2nd Gen (My Son)
Apple TV 2nd Gen
Airport Extreme
I'm sure i'm missing something.....

Hi.
Purchase Mac OS X Lion v10.7 (or OS X Lion Server) at the App Store.
Make sure your Mac meets Lion's requirements before purchasing.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OSX v10.6.6 or later (V10.6.8 recommended)
7GB of available spare
From here > Apple - OS X Lion - Technical specifications
A must read before upgrading to Lion > Lion upgrade questions: Apple Support Communities
You can access the App Store from your Apple menu, your Dock, or your Applications folder.

New update Lion Server 10.7.3. Apple app Virtual Host setup.

Similar Messages

Maybe you are looking for