New user : Do I get firewire or SCSI?
Hi there, I am pretty new to Final Cut but am editing a feature film very soon shot on HDV tapes. I need to get another drive to capture and edit on, do you think a Firewire external drive will be ok for this or is it worth getting an external SCSI drive?
What you want to do first is investigate the whole "HDV" workflow. Be sure you understand how your'e going to shoot, how you're going to capture, and if and how you will migrate HDV to and from other applications like After Effects, Color, or Motion.
Some folks convert to another codec, others edit in HDV natively. You need to know how you're going to work before you start production.
THEN decide on a drive system. However, I can't remember the last time anyone asked about SCSI around here. Must be two or three years. Lots of ultrareliable FW RAIDs on the market. Dont' forget to include backup capacity in your purchase decision and budgets.
bogiesan
Similar Messages
-
New user, trying to get online please help
Just got a new macbook pro, trying to connect wirelessly via a linksys server. Linksys tech support useless in walking me through the process, I'm a bit lost otherwise. I see the name of our home network pop up, but cannot connect, somebody pls help
Just got a new macbook pro, trying to connect
wirelessly via a linksys server. Linksys tech
support useless in walking me through the process,
I'm a bit lost otherwise. I see the name of our home
network pop up, but cannot connect, somebody pls help
Open Safari.
When you can't get to the default website, click "network diagnostics", this will show both you and us where your communication problem is between your computer and the router.
You sure you don't have a network password?
Is the router set to only accept certain MAC addresses? -
New user - How to get started?
Hi, I just installed Skype on my andriod phone. Will someone please tell me wher I may download the instructions on how to get it to work. Thanks
Hi and welcome to the Skype Community,
Please have a look at the following article with step by step instructions to get started with Skype for Android: https://support.skype.com/en/faq/FA12288/getting-started-with-skype-for-android-phones
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
HELP! New User: Can't get rates from Skype Website
I need to know rates calling from USA to Germany and from Germany to US. When I search at http://www.skype.com/en/rates/ I get a spinning cursor and nothing else. How do I get info on the rates? Tried to enter "France" but gort same thing
Try using the Windows Install Clean Up Utility to remove all those files and we can go from there. Here:
http://support.microsoft.com/kb/290301/
Rachyl -
I have tried putting music onto it, and it puts it on the playlist, but when I disconnect, it isn't there. I have also tried creating a new user, and still get the error. Please Help!!! Thanx!
Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i -
Creating a new user in solution manager?
Dear All,
How to create a new user in solution manager for creating an incident?prathish5,
I did this in our SolMan by following the instructions provided by a SAP document called: "Service Desk VAR Setup Master Data". I got it from the Support Portal, though I can't seem to find it now so I can't provide a link at this time.
Anyway, assuming that your SolMan is already able to download your master data (and/or your customers', if you are a VAR), these are the steps suggested by the guide:
1) The message creator (aka Key User) should have the following authorization roles:
SAP_SUPPDESK_CREATE
SAP_SUPPCF_CREATE
SAP_SMWORK_BASIC
SAP_SMWORK_INCIDENT_MAN
See also SAP note 834534.
A best practice is to create a Z copy of all of these roles (use transaction PFCG), so you can manage them and change them around if you need to. Just make sure to "activate" all the authorizations of your copy of the roles:
- Open the roles in tr. PFCG;
- Select Authorizations, and choose Change authorization data;
- If you get a yellow semaphore, be sure to review the authorizations and fill them according to your security policy. You can assign global permissions for all the authorization objects by double-clicking the yellow semaphore;
- Generate the profile, then go back and save the role;
2) Following the guide, with tr. SU01 I created a Template user and called it KEY_USER (make sure the user type is actually Template) and assigned to it the Z roles you created in the step above;
3) If your SolMan is working properly, you can now use report AI_SDK_SP_GENERATE_BP (tr. SA38) to create the Business Partners and SAP users automatically. The report will log in the Support Portal and read the users which are authorized to open a SAP tickets, and create a BP and user for each of them. Use the Template user KEY_USER created in step 2 as a "Reference user" and all the new users will automatically get the correct autorizations. Also if your SAP Connect (tr. SCOT) is correctly configured, you can choose to send an automatic mail to each user, with their login and generated password.
Otherwise, you can manually create a user with transactions SU01 and BP - be sure to fill the "Identities" table here - the report AI_SDK_SP_GENERATE_BP makes all these things automatically so it's definitely your best bet.
4) Your users should now be able to log in with the SAPgui and use transaction CREATE_NOTIF to create a new message in your SolMan. Also if you have done the preparation steps correctly they should also be able to log in your Incident Manager using their browser, and open a message there and also review their past messages.
Those are just a quick insight of the steps you need to do. This is NOT an easy thing to configure, at least it wasn't for me; if you don't have a reliable guide to follow you're going to struggle: I strongly suggest you browse through the SAP documentations (also the blogs) - http://service.sap.com/xsearch is your best friend!
I hope this helps a little bit. Good luck. -
Hi
I HAVE LOGGED INTO oracle Portal with user : portal30 passwd : portal30.
After selecteing the administer tab when i click on create new users I am getting error
Error: (WWC-00000) with a back link ( which does not work ). I didn't get anything other than this on screen.
I have tried to found out the soln but never succeded. What you think would be the reason for getting this error?
do tell me on [email protected]
Regards and thanks in advance
KedarKedar,
You may be able to find help on this by searching the 9iAS Portal forum, this forum is for questons relating specifically related to the PDK.
thanks,
Sue -
Error when creating a new user
Hi all
When I try to create a new user I'm getting an error message Unknown message (ID = LOWERCASE_REQUIRED)
I entered all the required fields in the way it was defined and still I get this error.
I never had this problem before. Can anyone please help me with this issue.
Thanks
regards
LukeHi
Go to visual admin >> services >> UME Provider >> check the property default value is for ume.logon.security_policy.userid_lowercase
Hope it solve the problem
Cheers
Jawahar Govindaraj
PS:Reward pts -
Outlook Web App error for new user (Exchange 2010)
Hello,
Recently, our new user can't get on OWA because their regional setting page is returning "An unexpected error occurred and your request couldn't be
handled."
with "Url: https://mail.shdm.org:443/owa/languageselection.aspx"
I've search many site and i've not been able to find a working solution.
I've check the redirection, everything seems ok
here is the complete detail message
An unexpected error occurred and your request couldn't be handled.
Request
Url: https://mail.shdm.org:443/owa/languageselection.aspx
User: [email protected]
EX Address: /o=SHDM/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=promoteurs790
SMTP Address: [email protected]
OWA version: 14.3.195.1
Exception
Exception type: System.ArgumentNullException
Exception message: Value cannot be null. Parameter name: value
Call stack
Microsoft.Exchange.Clients.Owa.Core.Utilities.RenderDirectionEnhancedValue(TextWriter output, String value, Boolean isRtl)
Microsoft.Exchange.Clients.Owa.Core.LanguageSelection.RenderTimeZoneSelection()
ASP.languageselection_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer)
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
System.Web.UI.Page.Render(HtmlTextWriter writer)
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Hope that someone can help!
AlexandreHi,
I have seen this same error before. That issue resolved by Exchange 2010 SP3 RU7.
So please refer to KB 2961522
and install Update Rollup 7 for Exchange 2010 SP3 to solve this issue.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Safari and Chrome will not display some pages right for new user account
Not sure this is a Safari issue actually. Behavior is also in Chrome, but not Firefox. If I need to post elsewhere please advise.
24"imac running 10.5.8. 2gb ram, software update run,
Setup a new user account. Machine will have 2 users.
When I login as the new user, in both Safari and Chrome, some pages - google, ebay, amazon, cnn, yahoo, do not display correctly. Mainly empty space, a few graphics all wrong. They do display correctly in Firefox.
I assumed it was the user. So I added a 3rd user. Same behavior. Tried giving the new user admin rights. Same problem.
For the admin account, everything's fine on those pages, both in Safari and Chrome.
It feels like the new user is not getting access to something it needs, but it also feels like more than a font problem. Thanks for any suggestions. DanThanks for your thoughts. Here's what I've learned. The browsers display correctly for the new user after SafeBoot. I removed all startup items, to no avail. Removed all fonts from the new user account, nothing. Removed all fonts from the admin user's library, nothing. Then I removed all fonts from the HD library, and that fixed it for the new user. Now I just have to figure out which one it was.
So in summary, a bad font in the HD library was affecting Safari and Chrome (but not Firefox) in new user accounts, but not in the admin user's account. Nice. D -
Can't create a new user session with KDE
Hi,
when I select "Switch user" in KDE, and try to start a new user session, I get dropped to a lockscreen of the currently logged-in user. I first thought this was a KDM issue, but this still persists with SDDM. I'd post any relevant logs, but I'm not even sure where to look for the source of the problem now.
Thanks in advance!I have the exact same problem.
Using:
kde-meta-* 14.12.1 -
How to create a new IView with a new User assigned to it?
Hi All,
I have a Web Dynpro application and I want that to use in Portal.
I am creating a IView..and a Role and assigning it to a created User.
But when I am logging in with the new User I am getting an error. The Error is some Desktop.
Can any provide me the steps for the creation of the same.
Regards
DKHi,
Here is the step-by-step procedure to create a web dynpro iView in portal:
1. Logon to portal.
2. Content Administration->Portal Content.
3. Right Click on the folder 'Portal Content'.
4. Select 'iView' ->'New'
5. In the Template Selection, select 'SAP Web Dynpro iView' and click 'Next'
6. In the 2nd step, Give iView Name and iView ID and a prefix. Next.
7. Select application variant, say, 'Java' in the 3rd step. Next.
8. In the 4th step, select the System (Your WAS System), give the project name of your webdynpro, like, local/ABC_Project in the WebDynproNameSpace. In the Application Name, enter the application name of your Web Dynpro Application, say ABC_App. Next.
9. Finish.
10. In the left panel, now you will see an iView has been created.
11. Create necessary role/workset and assign this iView for an user.
Regards,
Vijayakhanna Raman -
Error when cerating a new user
Hi all,
When I try to create a new user I'm getting an error message Unknown message (ID = LOWERCASE_REQUIRED)
I entered all the required fields in the way it was defined and still I get this error.
I never had this problem before. I also tried to create user from http://<servername>.<port.no>/useradmin
still I get the same error.
Can anyone please help me with this issue.
Thanks
regards
LukeHi Amit,
thanks for responding.
I checked the setting the
#minimum number of lower case characters in user logon id
x < 0: forbidden; x = 0: allowed; x > 0: required
(Type: Number, Default: '0')
ume.logon.security_policy.userid_lowercase=0
It is set to 0.
I still have this error and please help me to resolve this.
thanks
Regards
Luke -
Hi All,
I have created seperate folders each for roles, Worksets, iviews and pages and created respective object in each and in the Navigation proprty category, i have also enabled Entry Point. Later i created a user and assigned the role created to the new user. When I login with the new user, am not getting the page. I can see the preview of iview i have created but not from new user's login. Please give ur valuable inputs.
chandraHi Chandra,
Following steps will ensure that your page is visible
1. Assign the role to user
2. Set Role of workset as the entry point
3. login to your portal and it will be visible
Regards,
Ravi -
It seems my new user isn't getting the invitation to my team. I've tried having the user create an adobe account and tried having him just log in to the CC app. but it want to be in "trial" mode. Not sure what to do next. Any ideas?
Hi There,
Kindly ask the user to check the Junk Email and spam folders.
This is what you can try.
Send invitation to a different user so that you can test if the email account that you are inviting is faulty or not.
If you are getting the same response from another user as well, kindly contact Adobe Support via: Contact Customer Care
Thanks,
Atul Saini
Maybe you are looking for
-
Printing Adobe Form in Webdynpro
Hi Experts, I need one help from all of you , its quite urgent. Actually I am trying to print Adobe form in webdynpro method like below: "----- Take the Adobe fprm -------------------" lv_form_name = 'ZHR_SAP_FORM'. CALL FUNCTION 'FP_
-
[External Window] Reuse an existing window
Hi, From what I have read, this is not possible to close an external window from the parent web dynpro application (external means opened through create_external_window method). In spite of what the SAP Help documentation is saying (http://help.sap.c
-
Mail says it cannot find reply??
On my Exchange account, when I hit the arrow indicating a relied message, an error message pops up telling me that Mail cannot find the reply, that I may have deleted it. However, the replies are sitting in my sent mail folder. These are messages tha
-
I have a file, created in Keynote 09, that I cannot open anymore. I receive the message "Unable to open 'filename' because it isn't a valid keynote document". Same message when double-clicking the file or from the Open... menu. I suspect the file is
-
SAP BPC DOORS SHEET MIS TEMPLATE IMPLEMENTATION
Hi ALL, In my first Input Template I got the data for individual one.like... Particular -Sales group, Region, Product we get value. Whereas in my Second MIS Template I need data for the sum of all data from first Template and result for one GL Accou