New user - setup help!!

Hi,
Just put together the system below, didn't yet plug in any of the back panel extras. Memory in 1st purple slot (of purple, purple, green), CD on Primary master - top yellow IDE controller (IDE2?)
Evertyhing seems fine on swithch-on, leave the BIOS alone (except boot from CD), then config the SATA BIOS.
CD boots (Win XP Pro - no SPs). And the problems start - I get no response from pressing the f6 key (changed keyboads - no luck), then it freezes a bit later in, before it gets to the setup.
Anyone have any ideas, it's driving me mad!!
Thanks,
Andy

thats no problem
had a great few days up there a few years back after we nicked a draw of ya at the valley with my eldest two boys
great fun in the corner singing we made kegan quit at ya
untill that xxxxer shearer took a late free kick as i recall
it was also the night they introduced kenny to ya
every one was great to us
i like jimmy nail as well

Similar Messages

New User Setups - My Face...

Oh yeah! Plus New User setup forms from HR with wrong spelling as well, and you get ahead of the game and go and setup every account they need, login as them to their new machine, an email goes out to all users asking them to welcome the new start, the GAL goes out to all remote Outlook users and everything - then they turn up for work on their first day and call you to say their name is spelt wrong. Oh the pain, the anger, the postal feeling, then... ah, the coffee - that's better.....
And it all begins again.

when I have to work on a new user setup for a unique snow flake...
Instead of a common/sane/literate spelled name such as Matthew, I have to create Matthieui
Or the latest one... Synthia instead of Cynthia.
Nychole and Ashyliey and Jaemms
http://www.stupidkidnames.com/all-the-stupid-names/
^-- Just ran across this. Ahahahahaha.
Do parents not understand the psychological ramifications that comes with this???
This topic first appeared in the Spiceworks Community

Customisation of New User setup pages.

Is it possible to customise the New User setup screens/forms? If not, is it possible to add few more screens to capture more details?
null

It believe it is not possible to adjust these screens in the current version of Portal. The database packages that build these screens are wrapped.
But we managed to create our own screens using the Portal API package (see PDK) that edits the user (wwsec_api.modify_portal_user). You can create an application component (form ) that is based on a procedure. It seems to work.
I don't know if this also works for the creation of users (wwsec_api.add_portal_user).
null

New User, Setup Problem

Hello , i am a new user in J2ME (Mobile/Wireless). I was download the studio5me-win-en.exe file. I tried to setup but i take this message < A suitable JVM couldnot be found. Please run the program again using the option -is:javahome <JAVA HOME DIR> >. what can i do?
Sorry for my English.
John.

To XxPeterPxX
I have the same problem that you answered firstly, it's a nightmare! I did what you said and I ran: studio5me-win-en.exe -is:javahome c:\j2sdk1.4.2_01. A file download appears with only the 'open' (not 'save') option availabe. When I press open, the old message appears (i.e. -is:javahome <JAVA HOME DIR> ). Please can somebody help me I desperately want to get this program running. I would appreciate it if you would reply to my email address ( [email protected] ). However, if that is not possible, I will still be grateful for your reply to this message.
Regards,
Alex Kottke

Data base problem-new user need help

im new user and trying to insert data base to my page using
"asp.net c",i get connetction to my data base but when i try to
build a form ,and then preview him i get ,the following message
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: File or assembly name DreamweaverCtrls,
or one of its dependencies, was not found.
Source Error:
Line 1: <%@ Page Language="C#" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM
ataSet
Line 4: id="DataSet1"
Source File: e:\inetpub\wwwroot\Untitled-1.aspx Line: 2
Assembly Load Trace: The following information can be helpful
to determine why the assembly 'DreamweaverCtrls' could not be
loaded.
=== Pre-bind state information ===
LOG: DisplayName = DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=836f606ede05d46a
(Fully-specified)
LOG: Appbase = file:///e:/inetpub/wwwroot
LOG: Initial PrivatePath = bin
Calling assembly : (Unknown).
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file
(E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from
E:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.DLL.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET Files/root/804ee9b4/26f0df32/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///E:/WINDOWS/Microsoft.NET/Framework/v1.1.4322/Temporary
ASP.NET
Files/root/804ee9b4/26f0df32/DreamweaverCtrls/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls.EXE.
LOG: Attempting download of new URL
file:///e:/inetpub/wwwroot/bin/DreamweaverCtrls/DreamweaverCtrls.EXE.
Version Information: Microsoft .NET Framework
Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I know its probably something stupid ,so u can lauph,but i
realy cant fix it.
need help
tnx for advance

anyone? please help

Can't Unpartition windows disk. New user please help!

Hi there,
I am a new user to MAC. Everything was working just fine until I decided to partition my drive using bootcamp for Windows XP. The disk was a little scratchy but I thought I would try any ways. If it worked great if not whatever. Well Mac partitioned the drives nicely to 32GB. However when I tried to install my Windows XP disk with SP2 it failed. So I said whatever. I went to eject the disk and it wouldn't eject. So I turned off the computer and turned it back on then ejected the disk again which worked.
The only problem is I had a Volume called BootCamp and a Volume called Disk0S1. I tried to use BootCamp to delete the partitions and it told me; "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again".
I wasn't to sure what that means however I went to Disc Utilitiy, Erase, highlighed Bootcamp(which is now called Disk0S3 I don't know why) and went to security option, Zero Out Data came back and hit Erase. The Volume Format says MS-DOS(FAT) and the Name says Disk0S3.
So off it goes and the disk is erased, unmounted and then mounted and put right back. I am assuming I am doing something wrong. Do I need to change the Volume Format to MAC OS EXTENDED (JOURNALED)? If so do I change the name? If so to what, Macintosh HD?
Everyone at work says mac ***** I don't wan them to be right so can someone please help me. Also if I can't get back to one partition do I just reboot the mac with the disk that was provided? Of course I would loose all my info but that is okay I only got this mac on December 25.

Get a bootable, external HD (preferably FireWire, since it's 40-50% faster than USB 2 and designed for data transfers), make a bootable backup/clone of your current installation, and ensure that it's bootable and works like the original.
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/backuprecovery.html
Then, while booted into the backup/clone, launch Disk Utility, and erase and reformat your internal HD. That will preclude having to start from scratch. Once you get your machine running as you want it, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

New user, itunes help FAST :)

i'm a new user, i have a 2 GB nano, and i can't figure out itunes. i downloaded from apple.com/ipod/start like i was told, but when i try to run it, my computer tells me that it isn't a valid Win32 application. any tips on what i'm doing wrong?

Hi. I had the same problem for the past two days...I ended up going to the download like usual but it said the same message. I stayed online but accessed Internet Explorer while still online and went to the apple homepage and did the download again...It worked....I copied URL to get to downloading page otherwise it won't work....
Good luck...also you can call customer support....

New user needs help with syncing

I have a new Curve. I use Comcast mail (POP3). I have installed Desktop Manager on my PC. I am not using an Enterprise server, nor an Exchange server. I would like to be able to receive, read, and delete using either device and have any changes reflected in the other.
From what I've read, it appears that you can only do that if you're using an Enterprise server or if you have an Exchange server and you install Redirector. Is that true? Or can my set up work?

POP3 email does not require a BES connection.
However you do need to make sure you are paying the service fee to the carrier for a BIS data plan.
If you have this, follow the steps below.:
Procedure
To set up your BlackBerry Internet Service or BlackBerry mail and messaging account, complete one of the following procedures:
Create the BlackBerry Internet, BlackBerry mail and messaging, or BlackBerry Mail account from your BlackBerry smartphone
Create the BlackBerry Internet, BlackBerry mail and messaging, or BlackBerry Mail account from your computer
To set up your BlackBerry Internet Service, BlackBerry mail and messaging, or BlackBerry Mail account from your BlackBerry smartphone
You can set up your account from your BlackBerry smartphone or from your computer.
Note (new BlackBerry Internet Service users only): New BlackBerry Internet Service, BlackBerry mail and messaging, and BlackBerry Mail subscribers can create their accounts on their BlackBerry smartphones without having to create a login user name and password to access their accounts. For more information on Automatic Login, see KB13955.
To set up your BlackBerry Interent Service or BlackBerry mail and messaging account from your BlackBerry smartphone
Verify your BlackBerry smartphone is connected to the wireless network. For information about network status indicators, see KB02334.
Click E-mail Settings.
Read the Legal Terms and Conditions carefully.
Select Yes, indicating you have read and understood the Legal Terms and Conditions.
Click I Agree, to be bound by the Legal Terms and Conditions to continue with the setup process.
Note: The BlackBerry Internet Service, BlackBerry mail and messaging, or BlackBerry Mail account is now configured.
Complete the appropriate steps to begin sending and receiving email messages.
Add an existing personal or work email address
Create a BlackBerry email address
Add an existing personal or work email address
On the Email Account Setup screen, enter your existing personal or work email address and password. Click Next.
You will receive a successfully configured access to your email account message. Click OK. The Services - Email Account screen appears.
The Services - Email Account screen provides an overview of the following:
Integrated email addresses
Add An Email Account option - allows the subscriber to integrate third-party email accounts
Services and Settings - designed to allow subscribers to manage their BlackBerry Internet Service accounts, including sending service books and changing the language
Help - provides online help
End User Agreement
Create a BlackBerry email address
On the Create a BlackBerry Email Address screen, enter a user name, password and confirm password, secret question and secret answer.
Click OK.
You will receive a successfully configured access to your email account message. Click OK. The Services - Email Account screen appears.
From the Service - Email Account screen, you may edit or delete each email addresses, integrate another email account or go to the Service and Settings screen.
To set up your BlackBerry Internet Service, BlackBerry mail and messaging, or BlackBerry Mail account from your computer
Note: New subscribers who create their BlackBerry Internet Service, BlackBerry mail and messaging, or BlackBerry Mail accounts from the computer and create a login user name and password to access their BlackBerry Internet Service account will turn off the Automatic login feature. For more information on Automatic Login, see KB13955.
Perform a Register Now operation on the BlackBerry smartphone. For instructions, see KB00510.
Navigate to your wireless service provider's BlackBerry Internet Service account page.Note: To find your service provider's BlackBerry Internet Service web site, go to the Support section on the BlackBerry web site (http://na.blackberry.com/eng/support/software/internet.jsp) and click the link for your service provider in the Accessing the BlackBerry Internet Service Website section.
Click Create New Account.
Read the BlackBerry Internet Service End User Agreement, and place a check mark in the box labeled I have read and understand the Legal Terms and Conditions. Click I Agree.
Type the personal information number (PIN) and International Mobile Equipment Identity (IMEI) or electronic serial number (ESN) for your BlackBerry smartphone, and click Continue.Note: For instructions on how to locate the PIN, IMEI or ESN on your BlackBerry smartphone, see KB05026.
Type a user name and password, and click Next.
If the user name chosen has already been taken by another BlackBerry Internet Service subscriber, you must choose a different user name. Suggestions for user names that have not yet been taken will be provided. Once you have chosen an alternative, click Next.
Your BlackBerry Internet Service account is now set up. You may begin adding email accounts or create a BlackBerry email address.
Additional Info
For a list of helpful articles and links regarding the BlackBerry Internet Service, visit BlackBerry Internet Service.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Very new user needs help setting up a three user network plus server

Hi,
I'm an owner/manager of a recruitment company in the UK and we use three mac minis in our office to run our recruitment software (on a filemaker database) internet, mail and MS Office 2008.
We currently use one of the mini's as a 'server' in so much that it has a external HDD attached and shared across the network. We use Airport Extreme to share the internet.
Although to begin with this set up has served us well the amount of data travelling across the network and the prospect of a couple of new employees starting has made me think it's time to invest in a network and server of some description.
With my very limited knowledge i'm proposing the following but would greatly appreciate some assistance from the forum users!
Install OSX 10.5.3 Server on one of the Mac Minis
Get an ethernet switch and cable the three minis together
Use the external HDD as a time machine backup and store all files on the 'server' HDD
Continue to use the Airport Extreme to share the internet over airport.
I have a couple of questions:
Can the Server computer still be used as a desktop or do we need to buy a new mini
Does this set up make the airport base station redundant
As we grow I would envisage enlisting the help of a specialist Mac IT support company but in the mean time any help would be greatly appreciated.
Thank you again in advance.

I would get something better specified than a mini to be my Mac OS X based server, and although you can run it as a desktop I wouldnt advise it.
You ought to go out and buy the book Mac OS X Server 10.5 Essentials - The only Apple-certified book on Mac OS X Server - which Ive found to be a godsend of a book in getting Leopard Server going. Make sure you get the 10.5 version. Im in the UK and got it from Foyles in London.
Your approach is fine, but Leopard Server isnt as plug and go as the rest of Apples products. In particular it just doesnt function correctly if you do not have working DNS before you start. Period. If you dont understand DNS in your office or If having read the book you find its too technical you might be better off buying a no-brand Network File Store/Disk or even a Time Capsule from Apple if its mainly shared disk space that you need.
Angus

Exporting from Numbers to Excel - New User needs help!

Hoping someone here can help me out, as I have searched the discussions and still haven't found what I'm looking for. I'm a new Numbers 09 user, and I love it. My experiences with Excel have been nothing short of frustrating, but with Numbers I feel like a spreadsheet wizard.
My problem is basically that I need to export my Numbers created sheets into Excel for use by clients that have not yet made the jump from PC/Excel to Mac/Numbers. This is crucial, as I just don't think I can build this sheet in Excel with the same type of success I have had with Numbers.
My Numbers document has five tables, a custom header graphic and a legend. When I export it to Excel, each table is put on it's own sheet, including the graphic and legend. Is there anyway anyone can help me export this properly or am I doomed to have to spend days learning Excel? Any responses would be appreciated. Thank you very much!
B

B,
It's a shame that you have become a Numbers user but are anchored to the Excel style of Sheet.
Separate Tables in Numbers will always become separate Sheets in Excel. If your clients don't have to write to the Excel document, why not send them a PDF of your Numbers document?
If you must furnish Excel documents to your clients, you're going to have to consolidate your five tables into one if you want everything to come out on one Excel sheet.
Jerry

New user: need help logging in not working

I tried to setup using google talk. My email is working but ichat keeps coming back that my user name and password are not correct. I've tried changing them. Made new connections. Failed at all tries. I know someone posted earlier but to be honest I didn't understand the fix. Sorry! Strange but I am on my moms macbook but my macbook pro setup with not problem. The setting seem to all be the same. Thank you in advance.

And specifically from those pics what does your server say you are trying to login to ?
It is common that a Jabber Account will think the server will be the @gmail.com (Or @googlemail.com) from when you type in your Jabber ID, when it should be talk.google.com as in the pics.
2:26 PM Saturday; April 5, 2008

New user need help!! please! how to delete old user profiles...? a

Hello Gents and Ladies. i just bought my slightly used macbook pro.Previous owner did not entirely delete his profile, my question is how do i completely delete old user profile? i deleted the old user and set a new profile in but for some reason under "System profiler" it still says old user's computer on it??
i'm a newbie to macs. so i'm really lost here.. please help thanks!!!

Open the Sharing pane of System Preferences and change the computer's name.
(23562)

New user: Need help with my phone. iSync on a G3 with OSX 10.3.9

Hi guys, this is my first post on this forum, so take it easy on me. LOL I just got a Sony Ericsson W810. I found out that I need to get iSync. Aparently iSync 2.2 is the program I need. Is this available for my version of OSX? I'm not sure if a new version of OSX is compatible with my G3. Any help? Much appreciated. Thanks.

Welcome to Apple Discusssion.
iSync 1.5 is the version which shipped with and works with Mac OS X releases prior to 10.4 - iSync 2 and later packages are not compatible with Mac OS X 10.3.9 or any release of the OS. With Mac OS X 10.4 and iSync 2, came a completely new synchronization technology: the Sync Services framework.
You can find out what, if any, options exist for SONY Ericsson users here, at Julian Wright's excellent site:
http://mobile.feisar.com

New User need help, can't get installation completed

Got my new iPod, 30 gig, color, photo, etc last week. Put in disk to install software. It stopped during the middle of installation so removed disk and found it was scratched big time (I'm sure it was something I did). So, I went to website and downloaded the iPod user update 2005-11-17. Got it loaded and restored. Rebooted computer and all I get on my iPod screen is the "Do not disconnect". I uninstalled iPod software and did the installation, restored again and same thing. I have to think there is an easy solution to this, but I've read everything I can find and no answers. It would be SO nice if Apple had a customer service I could call as I'm sure I'm doing something wrong (and stupid). Anyone have any ideas? I got the iPod from frequent points with my credit card company, so can't take it back to local retailer. Please help, I want it to work so bad! LOL Thanks!

Hi Jimmy,
Please try the following :-
1. Eject your iPod from your computer
2. Press "select"+"menu" keys for reset, hold the keys until you see the Apple logo
3. Uninstall the iPod updater and iTunes by Add/Removal software
4. Downloand the iTune6 and iPod updater from apple.com again
5. Install both of the softwares
6. Open the iPod updater and wait until it asks you plug your iPod
7. Connect your iPod
8. Click the Restore on iPod updater
Good luck

New User: Needs Help with getting started with the Z

Hi, my son got a creative Zen for xmas, only getting round to getting it together now, and having some problems with the manual. All this is new to us -technology etc. We have managed to rip a CD but cant get any further! Downloading from internet sounds like such a good idea, but 'know-how-to do' seems light years away in this house! Is there an easy start manual or step by step directions that I've missed out on somewhere? the quick start manual is fine for learning how to use the player but doesn't give any info on ripping CDs and whatever comes after. Can any of you 'experts' bring yourselves back to the begining and explain what to do in simple english?
Message Edited by Jeremy-CL on 02-0-2005 0:25 AM

Mother,
I moved and edited your message as your are more likely to get help out here. As far as suggestions go for downloading from the internet goes, there is not a lot of difference between getting it from CDs. The main difference is the process of actually getting the music.
First off there are several music stores out there and some that are free. Here are a few suggestions (this is all personal knowledge, this is not an official endorsement of any of these):
Napster - Integrates into Windows Media Player if you desire and can transfer directly to most Zens. Also allows a user to subscribe to an account that allows for streaming and computer only downloads of music (must purchase song to transfer to the player...usually around .99 a song)
Buymusic.com - Website interface that sells individual tracks and albums.
Wallmart music store - Website interface that sells individual tracks and albums.
There are others but these three are the mains ones (outside of itunes, which is designed for the Ipod).
Basically once you download them, you go into MediaSource or Windows Media Player and add the files to the music library. Then you just transfer like you do with CDs.
JeremyMessage Edited by Jeremy-CL on 02-0-2005 0:34 AM

New user - setup help!!

Similar Messages

Maybe you are looking for