New user with problems in Flickr

I'm a brand new automator user. I am going through the tutorial first few examples for using Automator on www.automator.us in order to get a general idea of what I can do with this program. I was able to get through the "Re-name Finder Items" just fine, but ran into a problem while going through the "Images from Webpages" section (http://automator.us/examples-02.html). I followed the instructions, it appears, exactly but am getting an error when running the workflow during the "Get Image URLs from Webpage" (2nd) stage. I am trying to capture the images from Flickr.
The error is this:
Applescript Error
sh: -c: line 1: unexpected EOF while looking for matching `''
sh: -c: line 2: syntax error: unexpected end of file (2)
I would appreciate any help with this. I was really excited to start using the Automator to it's fullest potential, but am incredibly discouraged by this probably simple problem. Thank you so much for any help.
Max

I am also having similar problems waking the system from standby.
I had it in S1 and the power light and the hdd light both came on, but I got a blank screen and then finally it rebooted? So, I changed it to S3 and the system appears to shut down completely when I hit wake. I will try the different settings on page 3-18 per your comments above.
Also, I do have Cool n' Quiet enabled.

Similar Messages

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

How can i create a new user with only read rights ?

How can i create a new user with only read rights ?

You are asking about a Database User I hope.
You can look into the Oracle 8i Documentation and find various privillages listed.
In particular, you may find:
Chapter 27 Privileges, Roles, and Security Policies
an intresting chapter.
You may want to do this with the various tools included with 8i - including the
Oracle DBA Studio - expand the Security node and you can create USERS and ROLES.
Or use SQL*Plus. To create a
user / password named John / Smith, you would login to SQL*Plus as System/manager (or other) and type in:
Create user John identified by Smith;
Grant CONNECT to John;
Grant SELECT ANY TABLE to John;
commit;
There is much more you can do
depending on your needs.
Please read the documentation.
-John
null

How to create new user with more than one default folder

hi
A new user created in OCS has only one default folder(Inbox).
I want to create new user with customized default folder.
for example:
a new user has more than one default folder(Inbox,Outbox,Draft,Dustbin...)
And also I want to automaticly enable the functions:
When sending messages, place a copy in Outbox
Keep message drafts in Draft
Move deleted messages to Dustbin
who know that?
thanks

The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

Create a new user with Privileges to execute Seeded API's

Hi,
We have a requirement from our client, they want to create a new user with Privileges to execute Seeded API’s,
So they dont want to execute using APPS user.
We want to know is it possible to have a new user for executing seeded API's and if so what all priveleges we need to have.
We are on 12.1.3 with 11.2.0.3 two node RAC Database on Exadata and Exalogic servers.
Waiting for your suggestions and replies.
Thanks

Hi,
Plz update this forum,
and give me a suggestion at the earliest,
Waiting for your valuable advice.
Thanks

Create New user with ...

Hi all
I need to create new user with the following privileges :
1- access any table data (read only)
2- access the tables structure (read only)
3- access the tables relations (read only)
thanx in advance

Hi,
giggs11 wrote:
I did the following :
create user youruser identified by yourpassword;
grant connect to youruser;
grant SELECT_CATALOG_ROLE to username;
but I cann't see my tables
there is no erroExample :-
Step 1:-
sql> Conn system/manager@orcl;
connected.
step 2:-
SQL> create user trial identified by trial;
User created.
Step 3:-
SQL> grant connect to trial;
Grant succeeded.
SQL>grant SELECT_CATALOG_ROLE to trial;
Grant succeeded.
SQL> grant select any table to trial;
Grant succeeded.
Step 4:
SQL> conn trial/trial@orcl;
Connected.
SQL> select * from tab;
no rows selected
Step 5:
SQL> select * from scott.dept;
DEPTNO DNAME LOC
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
Step 6:
SQL> desc scott.dept;
Name Null? Type
DEPTNO NOT NULL NUMBER(2)
DNAME VARCHAR2(14)
LOC VARCHAR2(13)
you must read about privileges..
http://download.oracle.com/docs/cd/B10501_01/server.920/a96521/privs.htm
Regards
S.Azar
DBA
"Question is Unquestionable"
Edited by: azarmohds on Aug 15, 2009 6:28 AM
Edited by: azarmohds on Aug 15, 2009 6:32 AM

How to create full new user with all privileges

how to create full new user with all privileges?
and how to delete existing users?
Thanks in advance..

Common solution is probably to use sudo for privilege elevation, wiki should help

I am a new user with i pad, I have an i phone with the app account tracker on it, I cannot get the information off my phone onto my i pad why?

I am a new user with i pad, I have an i phone with the app account tracker on it, I cannot get the information off my phone onto my i pad why?

iTunes: About iOS backups - Support - Apple

How do you change an used ipad to a new user with a new itunes account?

How do you cange a used ipad to a new user with a new itunes account?

plug your ipad to your computer, open your itunes, click on the ipad icon, at the first page there is an option to "restore" ipad to its factory settings, click it. Don't remove USB connection, wait until it finishes wiping the data and it should place a new window that asks you to register the ipad.
There you go, your iPad is sync with your itunes account under your name, its best to also use "Find my iPad" just in case it gets lost, you can track it from your computer. Very handy tool and its free!
But if you want the data that is in the iPad, back up it first and sync the content to your library before restoring it to its factory settings
Have a great day and enjoy your iPad

New user with strange font problem

I created a user account for my girlfriend...when she brought up the safari the google homepage had a strange grafiti font for all the text. (I say strange, but it's one of my many fonts in the collection) I opened up firefox and had the same problem...this morning I realized it was doing it in mail as well. Under my account (the admin and original account) there isn't an issue, but I've looked all over and can't find a setting to fix it for her account.
It's driving me nuts. Any help would be greatly appreciated.
15" Titanium Powerbook Mac OS X (10.4.8)

..."I say strange, but it's one of my many fonts in the collection"...
Since it sounds like you know the name of the font, you could try to see if anything turns up with the command below, which searches through user preferences for a given string:<pre>defaults find "font name"</pre>A partial font name should be fine. Enter the command using "/Applications" > "Utilities" > "Terminal.app".
Also, the caches (associated with a user by the 'uid') don't appear to be cleared when an account is deleted. So if a new user is created and gets assigned a previously used 'uid', they may inherit the old cache files. For starters, try clearing out any file or folder whose name contains the user's 'uid', such as the "/Library/Caches/com.apple.IntlDataCache.###" file or the "/Library/Caches/com.apple.ATS/###" folder belonging to the affected user. Then log out and back in. To determine the user's 'uid', try:<pre>id -u username</pre>

How to create new user, with same personal files, for troubleshooting?

I cannot find this answer in "Finder Help", nor in the Community discussions thus far. What I must do to troubleshoot the spinnign beach ball: My next step: I must troubleshoot my friend's iMac running Mac O.S 10.6.8 by setting up a new user, called "Test". This I can do easily. However, what I am unsure of is this: as this "new user", actually just me as a tester, I must be able to access the same email, Word files, Desktop, photos, etc. that I used to access. How, then? Copy all into a shared folder or what? There must be a less cumbersome way. I do NOT wish to delete anything. Of course, I have justmade a perfect backup of everything on my hard drive. Please advise re my next step: sharing the "User" little house files, with myself, as the new, possilbly temporary, user. Thank you so much, anyone and everyone!

You shouldn't do any of that for troubleshooting. The test user account should be pristine. If you copy stuff from the old account, then you also copy whatever is causing a problem.
Just use the Accounts/Users & Groups preferences to create a second user called, "test." Make this user an admin user. Then log out of the old account and log into the new one. That's it. You can still access and use applications in the Applications folder if you need to test third-party applications.
We could be more helpful if you explain just what you need to troubleshoot. If just the spinning beachball is your issue, then visit The XLab FAQs and read the FAQ on resolving the SBOD problem.
If the computer is simply running slowly then read the following:
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

New user with query about hands free kit

Hi, new user to the forum so please bear with me.
I have recently got a Nokia 6303 Classic 'phone and was thinking about buying a CK-100 hands free unit.
Questions are:
1/ Are they compatible?
2/ Do you have to use the external speaker supplied or can you use the car stero's speakers?
3/ Is the hands free unit easy to fit?
4/ Does the hands free unit automatically mute the car stero, or, is it necessary to buy a piece of equipment to do this?
5/ When fitting the hands free kit do any other connectors have to be brought to connect to the car stero? If so, are they readilly available?
The car the kit would be fitted into is a Mondeo ST220 with standard Sony 6 CD head unit.
Thank you - Steve

The issue was all around Mobilme syncs and the solution to stop duplicates by choosing "all contacts" solved the problem here.

New User, Setup Problem

Hello , i am a new user in J2ME (Mobile/Wireless). I was download the studio5me-win-en.exe file. I tried to setup but i take this message < A suitable JVM couldnot be found. Please run the program again using the option -is:javahome <JAVA HOME DIR> >. what can i do?
Sorry for my English.
John.

To XxPeterPxX
I have the same problem that you answered firstly, it's a nightmare! I did what you said and I ran: studio5me-win-en.exe -is:javahome c:\j2sdk1.4.2_01. A file download appears with only the 'open' (not 'save') option availabe. When I press open, the old message appears (i.e. -is:javahome <JAVA HOME DIR> ). Please can somebody help me I desperately want to get this program running. I would appreciate it if you would reply to my email address ( [email protected] ). However, if that is not possible, I will still be grateful for your reply to this message.
Regards,
Alex Kottke

PDF addresses not longer load and display PDF in Firefox and solutions suggest to other users with problem DON'T WORK (work fine in Chrome and Safari)

This is an ongoing problem with other users. When putting a PDF in address window of Firefox and clicking go to address FIREFOX WILL NOT LOAD AND DISPLAY THE PDF. This problem has come up in questions from other users on your site. NONE OF THE SUGGESTED SOLUTIONS WORK! (trying either the Firefox PDF viewer or the Acrobat viewer as default viewer)
I am using Firefox 23.0.1 (as some of the other users with the same problem). This was not a problem in the past with Firefox. Safari and Chrome continue load and display PDFs just fine from their addresses. This is a big problem as I now have to inform people who want to view my PDFs NOT TO USE FIREFOX BUT TO USE SAFARI OR CHROME.

It appears that a link to a PDF on an internet page will not download in Firefox either!
I went to this page:
http://www.nasa.gov/connect/ebooks/earth_art_detail.html#.UjYEzrwsU08
and tried to download the PDF link at the bottom of the page (Download: PDF 11.3 MB) It didn't work! Nothing happens. Tried it in Safari and it worked flawlessly.
I have a PDF file of my work in the public_html folder on my URL. I give the address generated by that file to people who want to view my work---this works perfectly in Safari and Chrome. As to your other question, can't bookmark it if I can't get to it in Firefox.

Replicate in the Master controller and creation of new user with cisco prime infrastructure 2.1.

Hello!!
We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers .
Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user.
The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users.
I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
Thanks.

As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left).

New user with problems in Flickr

Similar Messages

Maybe you are looking for