New WebEx session on testing the Messaging Service
To learn a little more about the messaging service and test to see if the messaging service is working, take a look at my new WebEx session, available at:
[http://www.businessoneecommerce.com/developerdownloads/Testing%20the%20Messaging%20Service%20WebTools%202007.zip|http://www.businessoneecommerce.com/developerdownloads/Testing%20the%20Messaging%20Service%20WebTools%202007.zip]
Or from our developer downloads page:
[http://www.businessoneecommerce.com/developer.html|http://www.businessoneecommerce.com/developer.html]
It seems working now. It looks like the we don’t need to specify any sender address (as it is working in one of our environment without specifying sender address value) in default deployed driver but this field is required when we deploy it using WLST command.
Ideally this should not be required as if we have one email driver then all the email should route through this driver but it’s not working this way L and seems requiring specific sender addresses in driver property.
Similar Messages
-
I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backupsHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Revision: 3867
Author: [email protected]
Date: 2008-10-24 07:13:10 -0700 (Fri, 24 Oct 2008)
Log Message:
Add new user-agent info to the sample services-config.xml file.
Modified Paths:
blazeds/trunk/resources/config/services-config.xmlResolved! The problem was in the php code the wizard had generated as an example and that I had edited in Dreamweaver. I had tried to start a session and set session objects in the php code. I developed if() { statements} to check the session variable before executing the function in some of my data services. Apparently the wizard does not like this. I removed all references to session. I reconfigured the input types and the return types for each service. With the code now clean the wizard created the example code and placed the proper package in the scr.services package. I still have custom php code and it executes.
Things I learned:
If the php code stops when a session variable is not available in the if statement and the data service is refreshed, the wizard will not "look" beyond the if statement.
Functions downstream of a session variable misshap will show in the data services window but the functions will have a circle icon to the left of the function name and each variable to be passed to the php code will be declared as type = Object in Flashbuilder. The input types and return types will have to be reconfigured for each non-functioning function. Simply commenting out a portion of the php code and attempting a refresh will not make it work again.
When the wizard is unable to refresh properly because of a stop in the php code it stops working completely so additional refreshes or creation of code is not carried out.
I decided to create a My SQL table for user and other identifiers rather than attempting the session object again.
Sorry, I did not make screen shots as I solved this problem. I hope the solution is not hard to visualize.
Thanks for looking and considering how to help me. I hope my solution works for you. -
Error in browser while testing the web service
Hi all
plz help me out in the following problem.
i have generated a simple web services program using netbean. while i am testing the web service i am getting the following error in the browser
Exceptions details : java.lang.RuntimeException: Service Class not generated as expected
javax.servlet.ServletException: java.lang.RuntimeException: Service Class not generated as expected at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.initializePort(WebServiceTesterServlet.java:546) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.doGet(WebServiceTesterServlet.java:158) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.invoke(WebServiceTesterServlet.java:104) at com.sun.enterprise.webservice.JAXWSServlet.doGet(JAXWSServlet.java:233) at javax.servlet.http.HttpServlet.service(HttpServlet.java:707) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844) at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287) at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212) at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252) at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75) Caused by: java.lang.RuntimeException: Service Class not generated as expected at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.initializePort(WebServiceTesterServlet.java:521) ... 29 more
regards
minaCheck this guide for creating a correct WSDL:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
User user need the role SAP_XI_APPL_SERV_USER
Regards
Stefan -
Hi, I'm trying to re-install the latest iTunes on my Gateway w/ Windows XP. I had to update it a while back to put songs on my brother's iPod, but my computer froze halfway through and nothing has worked right since.
I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services."
I looked through older discussions that told me to go to right click My Computer - Manage - Services and Applications - Services - Find Bonjour and restart it.
Well, the only option that I can click on is Start. When I do, it says "Windows could not restart the Bonjour Service service on Local Computer. Error 2: The system cannot find the file specified."
Where do I go from here? Help would be greatly appreciated, I've been trying to fix this for over a year now with no dice. Also, I cannot do a factory reset (last effort) because it says the administor's account is disabled and I do not have the disc.Sorry if double posting is a no-no here, but I forgot to add that I've already tried disabling Spyware Doctor.
-
When I attempt to install Itunes on Windows 7, I get the message "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services." What does this mean?
So many people are having this problem! Doehunter's instructions here worked for me! Hope this helps. https://discussions.apple.com/message/23824640#23824640
-
I had Adobe Acrobat Serial loaded before the hard drive crashed on my old PC. I have tried to download Acrobat 9 on my new PC, but always get the message “This is not a valid serial number”.
I had Adobe 9 Standard on the old. But what downloads from the page http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html is Adobe 9 Pro. Perhaps this Pro version is the problem.
Anyway, can you point me to a way to install Adobe on my new PC?You can try Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools.
-
When testing the message from RWB error - User PAMIDIK has no authorization
Hi Experts,
When i am testing the scenario from FILE to PROXIE i am geeting the following error in SXMB_MONI.
i went to RWB - IE - TEST MESSAGE .the message had left from RWB but when i see in SXMB_MONI in XI i get the following error.
Error Message: User XX has no authorization to process messages
Regards
KiranHi ,
where you are testing the message in RWB, IE or Adapter Engine ??I think you dont have proper authorization to perform the action check with you basis team.
Regards,
Raj -
For the laast hours, I hve been getting the message "service unavailable" when I clck safari or aol. WHat is the problem and how do I correct it?
See these articles for possible solutions:
*[[Firefox is already running but is not responding]]
*http://kb.mozillazine.org/Profile_in_use -
Since installing the latest version of iTunes all my music files cannot be edited, and I cannot import new music files into iTunes. The messages says I do not have enough access privileges even though I am the administrator of the system. If anyone can help me sort this out I would be really grateful. I have checked the read and write privileges for all the iTunes folders and it all seems in order so I can't understand it.
In general, I am getting really frustrated with Apple. They seem to be getting ever more controlling in their approach to their consumers. I need to edit music file information as I am a dj. And why can't I import music, unless I buy it from iTunes? Most of all, why can't I use the devices I paid a lot of money for in the way I want to use them, and not be forced to coerced to use apple's fee paying services (iCloud, iTunes).
I have used apple computers since the early 1990's, but in the last year I have gotten rid of my iPhone and my iPad and replaced them with Android devices. Much better and much less control. Perhaps it is time to switch from Apple altogether.Hi
Read this About Disk Utility's Repair Disk Permissions feature
and OS X Mavericks: If you don’t have the correct permissions to open a file or folder
Does this help?
Jim -
Error when testing the alert service
Hi,
Following Michal blog trouble shooting the alert .. i am checking the alert service in trans SICF
When i hit the test service I get this error page:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (xitest statt xitest.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Analyze CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages TeamHi Mushon,
The SICF service is used to check if the ALERTINBOX is activated. Before doing this , I would suggest you code to T code - <b>SE38</b>.
In the program , type <b>RSALERTTEST</b> and then click on EXECUTE button ( F8 ). In the next window, it will ask you for your ALERTCATEGORY. Just give the name of your ALERT CATEGORY and click EXECUTE.
If you have configured your alerts correctly, you will receive a message that tells ALERT IS GENERATED and will give the ALERT ID.
Now, go to your Run TIme workbench and then select ALERT INBOX and see if you have got the ALERT message in your ALERT INBOX.
If yes, then your ALERT INBOX service has been activated.
Regards,
Bhavesh -
Can not test the web service in JDeveloper.
Hi there...
I created an AppModule, added two custom methods, and generated a webservice for that. When I want to test the webservice I get the error "The Webservice Tester cannot be invoked because the WSDL document of the selected service cannot be read."
If I right the webservice and select run, I can view the web page to invoke the methods, However I am wondering why I can't test the service inside the developer.
The settings of my system are as follows:
OS: windows 7 64bit
JDeveloper: Studio Edition Version 11.1.1.3.0 , Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
I did not install any update for JDeveloper...
So if anyone is having an idea what this problem is let me know.
thanks .It seems that even if the test web service option does not work and i get the error, it is possible to run the web service, and then by clicking on the link in the log the tester in jdeveloper appears.
Don't know the reason for such strange behavior. -
Internet connection is AT&T highspeed DSL via Westell modem. Antivirus is AVG 2011. OS is XP Home SP2, circa 2002.
* [[Firefox is already running but is not responding]]
-> Profile in use
* http://kb.mozillazine.org/Profile_in_use
Check and tell if its working. -
I did as Apple suggested and went into my services page and stopped the Apple Mobile Device service. Once it stopped I started it again. I then went through the downloading of iTunes process again, and I got the same error. I have McAfee and Webroot Security, and I am operating on Windows 7. What should I do?
So many people are having this problem! Doehunter's instructions here worked for me! Hope this helps. https://discussions.apple.com/message/23824640#23824640
-
Help! When I try to down load the above message is what I get. I have uninstalled the last verision as it is giving me an error message also that is not running correctly!
Hello there, kjones7395.
The following Knowledge Base article offers up a few pointers in regard to Apple Mobile Device Service application:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro
Maybe you are looking for
-
N96 No Message Sounds after update to 12.043
I've recently updated my phones firmware to 12.043, impressed how much more resposive the phone is. However I now have an issue when I get a new text message the phone does not make any sound. I have checked the profile is on general and that the mes
-
I'm going to leave firefox if these issues aren't fixed
-
Another problem with using canvases and scrollviewers in tab
using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Med
-
Can't create Project from the Template or access project template
Dear Experts, We are facing a issue while trying to access the project template/create the project from project template. we have 4 project template in place and of these two are working perfectly fine but From remaining two we are not being able to
-
I'm having sound trouble on my iPod 4
I am on vacation and a few days ago my volume stopped working while I was watching a YouTube video.So I checked my sound settings and everything was working correctly.So I tried using my volume buttons and it didn't change anything it just said "Soun