Newbie needs help to create a desired Effect
Hi All,
I am a newbie to After Effects. I have managed to get to grips with the the functions of the software and now comfortable with the layout and application but now diving into the world of how to create the Effects I want.
I have the following logo and what I would like to is have have some footage I have recorded to play within the logo itself only. I have spent hours on google searching for tutorials and tips however I am unure of the relevant terminology so failing misrably locating some help.
If any one can give me any hints on how to achieve this or simply the correct terminology which would help with some advance searching I would be eternly greatful
Thanks in advance
N
A big thank you to you both
I will get stuck into this as soon as I have finished the list of doemstic jobs the other half has left today lol!
Thank you again, hugely appreciatted
The scattered approach to searching is certainly frustrating although I must admit I have come across some random stuff which was interesting so was not all in vein. However I am starting a course next month in AE so all is good
Similar Messages
-
Newbie needs help on creating banner with vanishing text.
I have never used Flash before. I may even be barking up the wrong tree. I am trying to create a banner that has text that "appears" and then "disappears". This is the mockup I made for the banner. I would like for the sentences to seem like they are coming out of the couds, and then vanishing. Any help you can offer would be greatly appreciated!
Thanks in advance,
MargaretThanks Ned! I did what you said and now have the words animated like I need to. But I am still having one problem. I'm not sure how to get my background to be visible through the entire animation. I can see it in the first frame and then it disappears.
Thanks again,
m -
Need Help to create new screen for RF Sapconsole
Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alainhi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren -
Need help in creating a chart from 3 datasets
Need help in creating a chart in SSRS from 3 datasets
Can someone help me in creating a chart from 3 datasets, however datasource is same.Thank you Olaf...
could anyone help me in using union all with the below
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value ,
CASE metricid WHEN 16 THEN 'FCR' ELSE 'Cases' END AS metric
FROM XXXXXX AS V
WHERE metricid IN (16, 11)
AND row_date BETWEEN '2012-01-01' AND '2014-10-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'Cases',
metric
FROM a
WHERE metric = 'cases')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'FCR',
metric
FROM a
WHERE metric = 'FCR')
, d AS (
SELECT b.YEAR, b.MONTH, c.FCR, b.Cases
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.fcr <> 0 AND b.cases <> 0
,E AS (
SELECT [Year], [Month], SUM(FCR) AS FCR, SUM(Cases) AS Cases
FROM d
GROUP BY [Year], [Month])
select YEAR, MONTH,
CASE MONTH
WHEN 1 THEN 'Jan'
WHEN 2 THEN 'Feb'
WHEN 3 THEN 'Mar'
WHEN 4 THEN 'Apr'
WHEN 5 THEN 'May'
WHEN 6 THEN 'Jun'
WHEN 7 THEN 'Jul'
WHEN 8 THEN 'Aug'
WHEN 9 THEN 'Sep'
WHEN 10 THEN 'Oct'
WHEN 11 THEN 'Nov'
WHEN 12 THEN 'Dec'
END AS MonthName
,e.FCR AS FCRCases
,e.Cases AS TotalCases
,CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
--,CONVERT(DECIMAL(18, 2),(e.FCR/e.Cases)*100) AS FCRRaw
from e
order by YEAR, MONTH
**************2nd query*************
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value,
CASE metricid WHEN 56 THEN 'numerator' ELSE 'denominator' END AS metric
FROM XXXXXXX.[Values] AS V
WHERE metricid IN (56, 10)
--WHERE metricid IN (11,16)
AND row_date BETWEEN '2013-10-01' AND '2014-02-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'numerator',
metric
FROM a
WHERE metric = 'numerator')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'denominator',
metric
FROM a
WHERE metric = 'denominator')
, d AS (
SELECT b.YEAR, b.MONTH, c.denominator, b.numerator
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.denominator <> 0 AND b.numerator <> 0
, e AS (
SELECT [Year], [Month], SUM(numerator) AS numerator, SUM(denominator) AS denominator
FROM d
GROUP BY [Year], [Month]
SELECT *,
CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
FROM e
ORDER BY 1,2
******************3rd query**************
WITH a AS (
SELECT --L.[LocationGroupId],
-- T.locationid,
-- T.AccountId,
TR.datestamp,
/*Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01'*/
TR.Period AS ValueDate,
CASE WHEN TR.TargetResultState = 0 THEN 0 WHEN TR.TargetResultState = 1 THEN 1 WHEN TR.TargetResultState = 2 THEN 1 ELSE 0 END AS Met,
CASE WHEN CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') > T.Startdate AND CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp))
+ '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') < T.Enddate THEN 1 ELSE 0 END AS ActiveTarget
FROM XXXXXX AS TR
INNER JOIN dbo.Target T ON TR.TargetID = T.ID
--INNER JOIN dbo.Location L ON T.Locationid = L.Id
WHERE --locationid <> - 1 AND
TR.Period IN ('201306', '201307', '201308', '201309', '201310', '201311', '201312', '201401'))
select ValueDate, SUM(Met) AS Met, Count(ActiveTarget) AS ActiveTargets,
right(ValueDate,2) as Month
,left(ValueDate,4) as Year
,CASE
WHEN right(ValueDate,2) IN (11, 12, 1) THEN 1
WHEN right(ValueDate,2) IN (2, 3, 4) THEN 2
WHEN right(ValueDate,2) IN (5, 6, 7) THEN 3
WHEN right(ValueDate,2) IN (8, 9, 10) THEN 4
END AS 'Quarter'
from a
group by ValueDate
order by ValueDate -
Need help to create report with jpeg/gif image
Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
JohnHi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John -
I need help with Creating Key Pairs
Hello,
I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
the class is :
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import au.net.aba.crypto.provider.ABAProvider;
class CreateKeyPairs {
private static KeyPair keyPair;
private static KeyPairGenerator pairGenerator;
private static PrivateKey privateKey;
private static PublicKey publicKey;
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
return;
createKeys();
saveKey(args[0],publicKey);
saveKey(args[1],privateKey);
private static void createKeys() throws Exception {
Security.addProvider(new ABAProvider());
pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
pairGenerator.initialize(1024, new SecureRandom());
keyPair = pairGenerator.generateKeyPair();
privateKey = keyPair.getPrivate();
publicKey = keyPair.getPublic();
private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
out.writeObject(key);
out.close();
private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
out.writeObject(key);
out.close();
the public key is:
�� sr com.sun.rsajca.JSA_RSAPublicKeyrC��� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm����9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�| xpt Javaur [Ljava.lang.String;��V��{G xp q ~ ur [B���T� xp ��ccR}o���[!#I����lo������
����^"`8�|���Z>������&
d ����"B��
^5���a����jw9�����D���D�)�*3/h��7�|��I�d�$�4f�8_�|���yuq ~
How i can generated the key pairs in base 64 or binary????
Thanxs for help me
Luis Navarro Nu�ez
Santiago.
Chile.
South America.I don't use ABA but BouncyCastle
this could help you :
try
java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
java.security.KeyPair kp = kg.generateKeyPair();
java.security.Key pub = kp.getPublic();
java.security.Key pri = kp.getPrivate();
System.out.println("pub: " + pub);
System.out.println("pri: " + pri);
byte[] pub_e = pub.getEncoded();
byte[] pri_e = pri.getEncoded();
java.io.PrintWriter o;
java.io.DataInputStream i;
java.io.File f;
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
o.println(new sun.misc.BASE64Encoder().encode(pub_e));
o.close();
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
o.println(new sun.misc.BASE64Encoder().encode(pri_e));
o.close();
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
StringBuffer keyBase64 = new StringBuffer();
String line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
keyBase64 = new StringBuffer();
line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
System.out.println("pub: " + pubKey);
java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
System.out.println("pri: " + priKey);
catch(Exception e)
e.printStackTrace ();
} -
Hi everyone,
i'm fairly new to RAID scene and i need help for creating RAID 5 with 8 disk's.
I have HP ProLiant DL380 G6 with 8 disk's, each 500 GB.
i'm trying to create RAID 5 and to have one spare disk. I have made array from 7 disk and then create logical drive.
the last disk (8-th) i used as spare.
up to now i think i'm ok???
what confuse me is:
7 HDD X 500GB= 3500GB
after creating array i get 3200 GB, where i lose 300 GB??
after creating logical drive i get 2700 GB, where i lose 500 GB???
from 2700GB i give 150GB for system partition and for data storage i have only 2550 GB.
Why i lose 800GB??
Can someone explain me how RAID 5 works, do i create it correctly and why i lose so much space???
Is there other way to create RAID 5 without losing so much space?
Thanks you in advnce.The first 'loss' you encounter (300MB) is due to megabyte counting/rounding. A 500GB disk contains about 500.000.000 bytes. This quite a bit less than if counted properly using binary. you loose about 24288000 bytes per disk this way!
http://en.wikipedia.org/wiki/Mibibyte |
http://en.wikipedia.org/wiki/Megabyte
the second loss is due to how raid works.in raid 5 data is written to multiple disks to improve reliability. the simplies t form uses 3 disks: a write will cause half of the data to be written to disk 1, half to disk 2 and the XOR of both datahalfs to disk
3. In this scenario you will loose 33% of storage space and you can loose up to one of 3 disks.
By adding more disks, data can be spread more and the ratio available/raw will increase, or you can write aditionnal crc data and increase resliency for failures.
http://en.wikipedia.org/wiki/RAID
To check the exact algoritmes using on you RAID adapter, I would recommend contacting the vendor (or checking their support site) From your numbres, I do not think you will be able to configure RAID 5 on the same disks and having more available
space for your data.
MCP/MCSA/MCTS/MCITP -
Need help in creating Buttons in ADF10g
Hi,
My questions are:
1. Is it possible to modify the width of row in ADF10g. Because the width of rows in my output are high. So I want to reduce it.
2. I need help in creating a new 'createbutton' to create a newlist for the table . for this I have used create button but didnot succed.
3. I also need help in creating 'save button' to save modified data into the table.
4. I need help in creating a select-one-choice and select-one-list for columns of table.
Please help me.
regards,
sanjana
sanjanathe Easy Tabs could be useful for your requirement
http://usermanagedsolutions.com/SharePoint-User-Toolkit/Pages/Easy-Tabs-v5.aspx
/blog
twttr @esjord -
Need help in creating multiple signature forms?
need help in creating multiple signature forms that can be digitally signed in adobe reader
Automator gets a bit unweildy when trying to vary things outside of what the actions provide. Since you are already using an AppeScript in your workflow, might as well do the whole thing:
set baseFolder to (path to desktop) -- the location to create the folder
display dialog "Please provide a new folder name:" default answer "test"
set folderName to text returned of the result
repeat -- keep repeating until a number is returned
display dialog "How many subfolders?" default answer "5"
set theNumber to text returned of the result
try -- test the result
set theNumber to theNumber as integer
exit repeat -- success
end try
end repeat
tell application "Finder"
try -- make new folder
set newFolder to (make new folder at baseFolder with properties {name:folderName})
on error number -48 -- skip errors if the folder is already there
set newFolder to ((baseFolder as text) & folderName) as alias
end try
repeat with X from 1 to theNumber
try -- make new subfolder
make new folder at newFolder with properties {name:folderName & X}
on error number -48 -- skip errors if the folder is already there
end try
end repeat
end tell -
Need help in creating tabbed webpart in sharepoint and no of tabs in webpart should be dynamic.
under each tab i should be able to add multiple webparts(each tab will have webpart zone)
programatically i need to generate tabs and insert webpart zones under each tab.
Let me know how can i achieve this.
i followed below article.
http://msdn.microsoft.com/en-us/library/jj573263%28v=office.14%29.aspx
but in this article the tabs and webparts are static and we need to close each webpart .
Kindly let me know the approach.thanks in advancethe Easy Tabs could be useful for your requirement
http://usermanagedsolutions.com/SharePoint-User-Toolkit/Pages/Easy-Tabs-v5.aspx
/blog
twttr @esjord -
Need help for creat apple id in iphone 5s
need help for creat apple id in iphone 5s
See this support document for instructions. http://support.apple.com/kb/HT2731
-
I need help with creating PDF with Preview...
Hello
I need help with creating PDF documetns with Preview. Just a few days ago, I was able to create PDF files composed of scanned images (notes) and everything worked perfectly fine. However, today I was having trouble with it. I scanned my notebook and saved 8 images/pages in jpeg format. I did the usual routine with Preview (select all files>print>PDF>save as PDF>then save). Well this worked a few days ago, but when I tried it today, I was able to save it, but the after opening the PDF file that I have saved, only the first page was there. The other pages weren't included. I really don't see anything wrong with what I'm doing. I really need help. Any help would be greatly appreciated.I can't find it. I went into advanced and then document processing but no batch sequence is there and everything is grayed out.
EDIT: I realized that you cant do batch sequences in standard. Any other ideas? -
I need help to create idoc from scrach.
i need help to create idoc from scrach.
Swamy Katta,
Please read "[the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]" before you post any further, and confirm that you have read them?
=> Search first, ask questions later please!
Julius -
MacBook - Newbie: Need help on printing wirelessly to XP shared printer
MacBook - Newbie: Need help on printing to XP shared printer
Bear with me please. I read tons of articles on this but somehow as a newbie to MAC (girlfriends sick daughter), I am missing something. 10.5.2
Currently, she can print directly if we plug in the HP Deskjet printer directly via USB to the MACBook. No problem.
When we first got the MACBOOK I tried setting up the MACBOOK wirelessly to recognize the workgroup where the printer was attached via USB to the Windows XP PC. However it printed out garbage since I did not know there was a difference between XP printing and MAC (Gutenberg/gimp printing/drivers).
Now I know there is a difference.
But in reading various instructions, I no longer can find how to connect the MAC to the Windows workgroup. Note we do have a printer set up currently as USB-HP Deskjet on the Macbook (not sure I need to delete it yet).
I went to System Preferences on MACBOOK and clicked on printers, more printers. In the drop down box was CANON, APPLETALK, IP HP printing and Firewire. There was no WINDOWS selection as I saw in other online web instructions.
So not sure how to proceed to find a way to:
1. Connect to Windows workgroup (click on what exactly), step by step please!!
2. Add correct HP Deskjet 5490 printer (perhaps there is one with Gutenberg or perhaps I need Gutenprint-really not sure what I am talking about)
Thanks so much in advance. Fiancé's kid has had her cancer recur in a different place and someone was nice enough to buy her a MACBOOK as a gift.
Sincerely
Peterccarbery wrote:
OK...I figured it out...no need to reply. I noticed that there was another Protocol to use to set up the printer on the Mac, I was using LPD, so I switched it to HP Jet Direct-socket, and it prints fine...thanks. I am curious as to why LPD wouldn't work; if anyone has that answer I would like to know...thanks
Any chance of posting the Protocol you used to connect to your printer with your laptop? I'm have the exact same problem printing from my MB. Same error message "..is busy". -
Need help in Creating a sequence
Hi,
I need to create a sequence which starts with the value one more than max value of one of the columns in a table. Can anyone help me in this regard?
Eg: I have a table 'User_Details' with one of the columns as 'ID', I need to create a sequence for this table which starts with one more the 'max(ID)' if there are any records already existing.
Thanks,
RaghuAssuming that you have some way to identify which columns of which tables will be populated by sequences in the new release, the you could write PL/SQL code to automatically generate this. In this example I have assumed that you need a sequence created forthe (single) numeric PK column of each table in a particular schema, and that the sequence name will always be table_pk_seq.
DECLARE
l_max NUMBER;
BEGIN
FOR r IN (SELECT c.table_name, cc.column_name
FROM user_constraints c, user_cons_columns cc
WHERE c.constraint_name = cc.constraint_name and
c.constraint_type = 'P') LOOP
EXECUTE IMMEDIATE 'SELECT COUNT(*) FROM '||r.table_name INTO l_max;
l_max := l_max + 100; --just to be safe
EXECUTE IMMEDIATE 'CREATE SEQUENCE 'r.table_name||'_pk_seq '||
'START WITH '||l_max||' INCREMENT BY 1';
END LOOP;
END;John
Maybe you are looking for
-
Can't group text or send/receive picture messages! Please Help!
Hell Everyone, so I just recently switched from my Iphone back to my blackberry for simplicity/practical reasons...I couldn't deal with the iphone anymore. In doing so, I came across a problem. I am not able to send group texts or send/receive mms. E
-
How to Check the report is Finished while calling a report from Forms 6i
Dear All, I am Calling a report from oracle forms 6i, after runing report in " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);" I need to copy the pdf to store it in another place once the report is generat
-
Recovery Mode Error 3164 After Updating To 6.1.3
So, here are my problems. 1. When I turn on my iPhone I automatically get the Itunes Recovery Screen. 2. When I plug It into my computer and go to restore my iPhone I get " Error 3164" (I have tried fixing this.) Someone please help me. I was trying
-
Trouble burning multiple movies
I am trying to burn 4 movies onto one disc they add up to a total of 322 mins and about 2gig of space. Now a DVD is only 4.2 so why does iDVD encode the files so large. Is there anyway around this with idvd or another program in ilife or that will ru
-
How ASA forwarding traffic to AIP-SSM
Hi All, Can someone help how ASA device forwarding traffic to AIP-SSM? I'm not taking abt Configuration part like Class-map, policy-map and service policy....want to understand the traffic flow from ASA once traffic matched with ACL to AIP-SSM. From