Newbie question: ODBC under Unix

Just a simple question that I can't seem to able to find a clear
answer to anywhere on this site:
- Does Oracle provide libraries for the ODBC API under Linux or
any other Unix?
(And if yes, where do I find them in my Linux (v8.0.5EAP) or
Solaris (v8.0.3) Oracle distributions?)
I know ODBC is very much a Microsoft thing, but if you want to
write software that is largely platform-independent (and granted,
underlying database independent too), then ODBC for database
access is the best thing there is?
Other opinions?
Neven
null

Neven (guest) wrote:
: Just a simple question that I can't seem to able to find a
clear
: answer to anywhere on this site:
: - Does Oracle provide libraries for the ODBC API under Linux or
: any other Unix?
: (And if yes, where do I find them in my Linux (v8.0.5EAP) or
: Solaris (v8.0.3) Oracle distributions?)
Check out OpenLink's UDBC - http://www.openlinksw.com/.
It's a connect-to-everything-from-everything-using-odbc
solution. They have a free license for 2 client machines and
10 connections.
null

Similar Messages

Unix version of Netweaver Dev Studio, Newbie question

Hi,
I have a very silly newbie question. Is there a unix version of netweaver developer studio and if so what is the path to the executable?
Thanks in advance
John

I don't think so. NWDS is built on top of Eclipse which is an open source project by IBM. Check out there site.
http://www.eclipse.org/
As of right now, I don't believe that SAP is offering a Unix version and I doubt that they will.
Regards,
Rich Heilman

Bug with RMI server under Unix

I have a server/client apps, and it work under Windows but not under Unix.
With Unix i have an exception :
java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:350)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:137)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:124)
at java.net.Socket.<init>(Socket.java:268)
at java.net.Socket.<init>(Socket.java:95)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:20)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:115)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:494)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:169)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:78)
at ServeurChatImpl_Stub.connect(Unknown Source)
at ClientDistantImpl.main(ClientDistantImpl.java:85)
Why?

Your question is very vague. Are you running the client and the server on the same machine or not at least it seems so. Are you using UnicastRemoteObject, RemoteObject or Activatable for extension. Also post some of your code and settings only then would somebody be able to help u.

SG200-08 Newbie Questions

I have recently purchased the SG200-08 Smart Switch, but I have a few "newbie questions" about it as I get started using it.
The on board firmware shows 1.0.1.0. Is that the latest firmware to the switch?
Do I need to enable IPv6 Auto Configuration and DCHPv6 in my switch settings to be ready for IPv6 as my ISP rolls it out down the road?
How do I go about changing the switch's username? I was able to easily change the password, but having issues getting the username to change.
Do I need to do anything about the LLDP-MED settings? What exactly is that?
How do I confugure the System Time Settings so the switch functions in my time zone (USA Central Time)?
Thanks a bunch for any assistance!

Hi Nathan,
My guess is that NAT is already on - you have one public IP address from your ISP. Your router will use NAT (network address translation) to allow multiple clients (and either dynamically assign them private IPs via dhcp or you set them statically) to connect to the internet using the one public IP. It also sounds like your RV042G is assigning both ipv6 and ipv4 addresses, and theres nothing wrong with that. Unless you have specific information re: ipv6 from your isp, however, I would suggest not worrying about it until you hear from them. Are your macs connected to the router via the SG200 switch? If so, it looks like its passing ipv6 just fine. UPnP is something completely different - thats with opening ports like you mentioned - its a way that your devices can communicate with the router to automatically enable the proper port forwarding for the device/application.
Regarding the username, create a new user account. I don't think you can edit the cisco user, but try deleting it after creating and testing a new user account..
I'm not familiar with the Polycom system, but I would leave the settings as default unless you are using true IP phones (rather than an ATA adapter). From a quick google of the polycom device, I don't think you will gain anything from LLDP/CDP as the handsets use regular cordless phone freqs. With my setup, we use cisco IP desk phones and cordless wifi phones, CDP makes life easy as the cisco access point, wifi phones, cisco switch, and cisco desk phones (connected via ethernet) see each other and know what they're dealing with automatically.
I don't see the SNTP setting for unicast / broadcast that you're looking at. For the switch to get the time from a sntp server, under administration -> time -> sntp settings, add a server, and then back on time-> system time, enable sntp server as the main clock source. What are you using as your sntp source? Do you have an internal sntp server? You don't need to enable dhcp on the sntp server.
May I also point you to the two manuals, I think they may be helpful: RV042G & SG200
Hope thats helpful.
Best,
David
Please rate any helpful posts.

Vector file - newb question

After reading the user manual, I still don't understand how this works. Let's say I use Adobe Illustrator to draw a picture of sayyyyyyyy.......a kitty. Is there any possible way to take my kitty picture, export it out of illustrator as a vector file and import it into Motion so that motion can scale that image more or less indefinitely and maintain the crystal clear image no matter what the size. Like, can I zoom in on kitty's eyeball in Motion and still have the image look good?
Sorry for the newbie question but I just have not worked with vector images much. Thanks for any help.

The answer is yes. All you do is save the file as .ai or .pdf, bring it into Motion, and turn off fixed resolution for the underlying media (import the file to the Canvas, select it in the Media tab of the Project Pane, select the Media tab of the Inspector, and uncheck Fixed Resolution). You can now scale it as large as you wish with no loss of resolution.

2 newbies question about diskgroups

Hi gurus,
I have 2 newbies question:
Im working in a RAC Database (11.2.0.3) on Redhat 5.3 with some disk groups. One of this groups have 6 disks on it with different space (134, 236G, 236G, 185G, 185G and 185G).
My questions are:
1) What would be happend when the lower space disk will be full?
2) At this moment the diskgroups are at 45% so i was thinking to change their spaces to have all with the same space (around 193G each), it would create any problem? i should restart database or can do it with database up?
Thanks

if a disk is filled, what would happen? could i resize the disks with same size without stop database and without affecting the data stored within each disc?
By the word 'disk' I assume you mean LUN . When a LUN in a disk group is filled, ASM will use the remaining LUNs to store the data. You should always use LUNs of uniform size to avoid uneven I/O .
could i resize the disks with same size without stop database and without affecting the data stored within each disc
You can get the Unix/Storage team to allocate more LUNs for this Server. Once these LUNs are added , check if the following pre-reqs are met for the LUN which is yet to be added to the disk group
v$asm_disk.HEADER_STATUS = 'CANDIDATE'
v$asm_disk.PATH = /dev/rdsk/youLUNname
v$asm_disk.NAME will be NULL
Now you can add the LUNs using
alter diskgroup DATA_DG01 add disk '/dev/rdsk/youLUNname' rebalance power 4 ; wait for rebalance to finish (check status in V$ASM_OPERATION)
Yes. The above can be done without stopping the DB. It won't affect the stored data either.

MEGA-Newbie Question

This has to be the most newbie of all newbie questions. Interestingly enough, it is the one that is most rarely answered in a non-technical way that the novice can understand.
What exactly do I need Motion for? What, in common-sense, regular-language terms, does it do?
My manuals tell me how to do all the things it does. But they assume I am an experienced editor (I'm an experienced filmmaker, but only just started working in editing) who already knows all the things that CAN be done and only wants to know HOW to do them in Motion. This is not me.
So, say I am making a 90-minute HDV feature music doc. I have footage, I have stills. I will need captions, titles and text on screen. I will need an end credit roll. What is it I will probably want Motion to do for me that FCP can't do on its own?
I'd appreciate an answer in somewhat non-technical language that addresses the practical use -- from a filmmaker's point of view -- of this no doubt amazing program.
Thank you.

hi Paul,
You are right you can do much of the things Motion does in FCP, but Motion takes them further and often makes them easier to do.
Briefly whereas FCP is generally for editing moving pictures from rushes to a coherent whole, Motion is used to composite or layers of moving pictures to make a new coherent whole picture.
So i plain words, you can meld different sources of video, stills text and other sources together to make a new end peice. You can animate text, warp pictures, create fires, smoke, hide bits ( masking), animate graphical elements. In short whenever you need to layer up multiple sources of imagery Motion is your man. Sure FCP can handle a lot of this, but Motion is designed specifically and only to do this, and does it very well. ( You would not want to edit in Motion!)
In your 90 minute example you could do it all in FCP and make it look very nice. But you might need to go the extra mile with the title sequence, perhaps the captions will have some kind of generic strap line ( lower third) under All these things could be done easier and better in motion. However you would not want to import the whole 90 minute programme into Motion and start throwing captions on it. Rather you would want to build each element ( strap line, animating titles, opening sequence etc) in Motion and then import them into FCP for the final mastering. Motion is for short sequences, and FCP is used to collect them all into one programme.
I make music commercials for a living, do all the cutting on FCP and build all the graphic elements in Motion, take a look at my site for some examples if you'd like,
http://www.moojoose.co.uk
Hope this helps you
regards
adam

RV042G Newbie Questions

I have the new Cisco RV042G router, and I have just a few "newbie questions" about it as I get started using it:
The firmware on board is v4.2.1.02. Since this is a brand new router, is that the latest firmware?
Under Time>DST Dates, what do I need to configure in there? I'm in the US, Central Time.
I want to use Back to My Mac from iCloud (formerly MobileMe). Under the iCloud preferances pane on my Mac, it's saying: "Back to My Mac may be slow because NAT Port Mapping (NAT-PMP) or Universal Plug and Play (UPnP) is turned off on your router. Turn on NAT-PMP or UPnP." What should I enable on my router in order for Back to My Mac to better function?
I'm using a VOIP phone on the network (only 1 device with a couple phones). Are there any QoS settings I should tweak for better performance of my VOIP phone? I did change the port the VOIP phone is connected to to High (instead of Normal) under Port Settings. Will this help boost performance?
I also want to setup a VLAN on a port for guests to access the Internet, but not have any access to my personal network. Here's the steps I've done so far. Is this sufficient or is there anything else I need to do?
I went to Setup>Network, enabled Multiple Subnets.
I added 192.168.254.1/255.255.255.0 as a subnet.
I went to Port Management>Port Setup, set the port I wanted to use (Port 4) to VLAN2.
I went to Firewall>Access Rules, added two rules:
Deny All Traffic from 192.168.254.0 to 192.168.1.0.
Deny All Traffic from 192.168.1.0 to 192.168.1.0.
Thanks everyone for your help!

Easy. just goto the DHCP field and fill in the Static DHCP fields.
Assigning static IP addresses by adding devices from a list
Click Show unknown MAC addresses. The IP & MAC binding list appears. If the web browser displays a message about the pop-up window, allow the blocked content.
The devices are listed by the IP address and the MAC address. (Typically the MAC address appears on a label on the bottom panel or back panel of a device.) If needed, you can clickRefresh to update the data.To select a device, first enter a descriptive Name. Then check the Enable box. Alternatively, select all devices in the list by clicking the check box at the top of the Enable column.
Click OK to add the devices to the Static IP list, or click Close to close the pop-up window without adding the selected devices. After you click OK, a message appears. The message includes important information. Read it before clicking OK. Keep the browser open and wait until the selected MAC addresses appear in the Static IP list.
Modify or remove list entries, as needed:
To modify the settings: Click a device in the list. The information appears in the text fields. Make the changes, and then click Update. If you do not need to make changes, you can click Add New to de-select the entry and clear the text fields.
To delete an entry from the list: Click the entry that you want to delete, and then clickDelete. To select a block of entries, click the first entry, hold down the Shift key, and then click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
Assigning static IP addresses by entering devices manuallyIn the Static IP Address section, add or edit entries as needed. Remember that the settings are not saved until you click the Save button.
To add a new device to the list: Enter the following information, and then click Add to list.
Static IP Address: Enter the static IP address. You can enter 0.0.0.0 if you want the router to assign a static IP address to the device.
MAC Address: Enter the MAC address of the device. (Typically the MAC address appears on a label on the bottom panel or the back panel of a device.) Enter the address without punctuation.
Name: Enter a descriptive name for the device.
Enable: Check this box to assign the static IP address to this device.
To add another new entry: Enter the information, and then click Add to list.
To modify the settings: Click a device in the list. The information appears in the text fields. Make the changes, and then click Update. If you do not need to make changes, you can clickAdd New to de-select the entry and clear the text fields.
To delete an entry from the list: Click the entry that you want to delete, and then click Delete. To select a block of entries, click the first entry, hold down the Shift key, and then click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
Using the Static IP List to Block Devices
You can use the Static IP list to control access to your network. You can block access by devices that are not on the list or do not have the correct IP address.
Add devices to the Static IP list as described in Static IP Addresses.
Enable or disable the following features:
Block MAC address on the list with wrong IP address: Check this box to prevent a computer from accessing your network if its IP address has been changed. For example, if you previously assigned a static IP address of 192.168.1.100 and someone configures the device to use 192.168.149, the device will not be allowed to connect to your network. This feature discourages users from changing their device IP addresses without your permission. Uncheck the box to allow access regardless of the current IP address assignment.
Block MAC address not on the list: Check this box to block access from devices that are not included in the Static IP list. This feature prevents unknown devices from accessing your network. Uncheck the box to allow access by any connected device that is configured with an IP address in the correct range.
Hope that helps.
Regards Simon
http://www.linksysinfo.org

Total Newbie Question ... Sorry :-(

I know it's a windows thing, and I am now converted to Mac but I gotta know this because it's doing my head in. It's a complete stupid green gilled newbie question.
When installing new programs on a Mac can you create shortcuts to the programs on the Dock? I did what I THOUGHT it would be, i.e I made an Alias and stuck it in the dock, but on rebooting my Mac later on, in place of the shortcuts where 3 question marks which when clicked on did absolutely nothing???
Help?
A.L.I
Windows XP Pro Desktop, Macbook Pro, 60GB iPod Video Mac OS X (10.4.5) OS X

You aren't installing something from a dmg file are you? The dmg is a disk image – kind of a virtual CD. So when you double click the dmg and then get the little disk/hardrive/custom icon on your desktop that is the same as if you had mounted a CD. You then need to drag the application off of that "CD" into your application folder. Then it is truly installed.
You can then "eject" the icon your your desktop. This is what happens when you shutdown and without remounting the image your dock shortcut can't find the original.
Just a thought.

File name under UNIX

Hi,
I have this problem: a part of my application is reading a file name. Sometimes the file name contains special characters: �, �.... Everything works fine when I'm testing on Windows. When I'm testing under UNIX I get '?' insteed of �. I can see that la file has a corect name on the HDD.
Why my application displays different results on Windows and UNIX?
Ex:
File f = new File("bla/bla1/bla2");
Filter filter = new Filter(".txt");
String[] files = f.list(filter);
The files array contains diferennts strings on Windos comparing to UNIX.

Que? File names are allowed to contain certain characters in windows, and another set of characters in unix.
/Kaj

Newbie Question. just installed IE7.. how do I set up a local host to preview sites?

Sorry for the newbie question... but it's been a long time since I have done this
Thanks!

Just define your site in DW as always. For a static site, that's all you need to do.

Newbie Question about FM 8 and Acrobat Pro 9

Hello:
I have some dcouments that I've written in FM v8.0p277. I print them to PDF so that I can have a copy to include on a CD and I also print some hard copies.
My newbie question is whether there is a way to create a PDF for hard copy where I mainitain the colors in photos and figures but that the text that is hyperlinked doesn't appear as blue. I want to keep the links live within the soft copy. Is there something I can change within Frame or with Acrobat?
TIA,
Kimberly

Kimberly,
How comes the text is blue in the first place? I guess the cross-reference formats use some character format which makes them blue? There are many options:
Temporarily change the color definition for the color used in the cross-reference format to black.
Temporarily change the character format to not use that color.
Temporarily change the cross-reference definition to not used that character format.
Whichever method you choose, I would create a separate document with the changed format setting and import those format into your book, create the PDF and then import the same format from the official template.
- Michael

Domain name settings - Newbie question

Sorry for a newbie question!
I am already pointing a domain name to web hosting for email account. Now, I need an application server to run ERP software and Oracle, and installing Solaris and Oracle need a domain name.
If I point my domain name to the server, how do I receive emails from web hosting???
Install an email server to the application server instead? What can I do if I want the same domain name? Any option?

Setting up a mailserver and making sure it doesn't suddenly turn into a spambox is not something you do with the use of a few commands. I suggest to dive into the Solaris admin guide on docs.sun.com and read up on e-mail and network services.
If that is asking too much of your time you'll be better off getting your ISP to handle all this for you.

Domain Name settings in Solaris - Newbie question

Sorry for a newbie question!
I am already pointing a domain name to web hosting for email account. Now, I need an application server to run ERP software and Oracle, and installing Solaris and Oracle need a domain name.
If I point my domain name to the server, how do I receive emails from web hosting???
Install an email server to the application server instead? What can I do if I want the same domain name?

Your questions are completely off-topic for the forum.
These SunOS forums are for questions on <i>"how do I install my OS"</i>
You particular question is in the <i>"how can I install Solaris while using the CD drive"</i> forum.
So, if you had a question on how to edit the /etc/inet/hosts file to establish a FQDN on the computer, then it might be appropriate for the forum.
Unfortunately, I don't have a clue on where to redirect you, except perhaps to the Sun Java Enterprise System suite of applications?

Newbie Question: How much computer do I need?

Newbie Question:
I would like to use MainStage 3 in a live performance environment to play bars, parties, etc. I'm not looping, using it to playback recordings, processing outboard equipment or vocal processing. I want to stop carrying Rolands, Nords, Korgs, etc and get to a controller and a rack with a Mac Mini in it.
I tested a download of Mainstage 3 on my home Mac Mini (late 2012, 3.5 Ghz i5, 4GB RAM, 500GB drive) and it seemed to run fairly well. $30 well invested so I trekked forward... I purchased a Mac Mini (late 2009, 2.52GHz Core 2 Duo, 6GB RAM, 128GB SSD) for $200. I started to do more elaborate keyboard setups to see how the CPU would hold up. It typically runs from 30% to 50% of capacity (CPU and Memory) It actually boots and runs better than the i5. I hear the occasion gitch, but it actually seems to be getting better in time (or I'm rock and roll deaf.
I got a rack, an Airport Express, a Radial USB interface and a Nektar Panorama P6. It's starting to get expensive, but I'm emboldened by the actual quality for the sound and the flexibility of arranging for live performance. What used to take me two and three keyboards to play, I can now fit on one performance patch.
OK, now the question... am I at the limits of this little Core 2 Duo? Should I upgrade the i5 with more RAM and a bigger SSD and use that? Should I get a new(er) i7 and bite the $1,500 bullet for the additional RAM and SSD?
I see that most of you are running pretty nice Macbook Pros with i7 and lots of everything. My needs are modest; am I OK?
BTW, I want to run a Mac Mini in a box because I don't want to carry a laptop out in the open. If I was doing bigger shows I wouldn't care but I play some rowdy bars and constantly have folks hanging off me while I'm playing. It's fun, but hard on gear. If you can't drop it or dip it in beer, it won't last long where I work.
Matt Donnelly

Rule of thumb: newer and faster is better. But, depending the complexity of your needs you may be OK with an older Mac. Some glitches that happen in a live performance are due to loss of communication with USB or Firewire inputs, so make sure they're secure. I recently upgraded from a 2010 Mac Mini 2.6 dual core with 16 GB RAM, which was used live for nearly four years, to the latest Mac Mini 3.0 i7 with 16 GB RAM and a 500 GB SSD. I was getting an occasional stuck note with the older one. The new one is rock solid. Some of my patches may have up to a dozen channel strips mapped to three keyboards. The Mini is mounted in a rack next to a MOTU Ultralite Hybrid. It is a good idea to map a panic button on your keyboard to controller # 123(all notes off). Also, you might want to invest in a battery backup power supply(APC, Cyberpower, etc.-$40-$60) to protect your Mac against power loss, which can damage you hard drive.

Newbie question: ODBC under Unix

Similar Messages

Maybe you are looking for