NEWBIE: UnmarshalException During Client Entity Lookup

I am receiving the following error when looking up an ejb from a client. What
am I doing wrong?
javax.naming.CommunicationException. Root exception is java.rmi.UnmarshalException:
Problem finding error class; nested exception is:
     java.lang.ClassNotFoundException: java.lang.StackTraceElement
java.lang.ClassNotFoundException: java.lang.StackTraceElement
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:169)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:190)
     at weblogic.j2ee.ApplicationManager.loadFromNetwork(ApplicationManager.java:536)
     at weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:341)
     at weblogic.rjvm.MsgAbbrevInputStream.readClassDescriptor(MsgAbbrevInputStream.java:280)
     at weblogic.common.internal.ChunkedObjectInputStream$NestedObjectInputStream.readClassDescriptor(ChunkedObjectInputStream.java:361)
     at java.io.ObjectInputStream.inputClassDescriptor(ObjectInputStream.java:901)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:361)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
     at java.io.ObjectInputStream.inputArray(ObjectInputStream.java:1009)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
     at java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:2258)
     at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:514)
     at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1407)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
     at weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:140)
     at weblogic.rjvm.ResponseImpl.getThrowable(ResponseImpl.java:117)
     at weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:106)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:262)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:229)
     at weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(Unknown Source)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:337)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:332)
     at javax.naming.InitialContext.lookup(InitialContext.java:345)
     at testjbossejb.EntityTester.main(EntityTester.java:40)

Since java.lang.StackTraceElement is a new 1.4 class, I guess that you run Weblogic using
1.4 and your client uses 1.3.
Bob <[email protected]> wrote:
I am receiving the following error when looking up an ejb from a client. What
am I doing wrong?
javax.naming.CommunicationException. Root exception is java.rmi.UnmarshalException:
Problem finding error class; nested exception is:
     java.lang.ClassNotFoundException: java.lang.StackTraceElement
java.lang.ClassNotFoundException: java.lang.StackTraceElement
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:169)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:190)
     at weblogic.j2ee.ApplicationManager.loadFromNetwork(ApplicationManager.java:536)
     at weblogic.j2ee.ApplicationManager.loadClass(ApplicationManager.java:341)
     at weblogic.rjvm.MsgAbbrevInputStream.readClassDescriptor(MsgAbbrevInputStream.java:280)
     at weblogic.common.internal.ChunkedObjectInputStream$NestedObjectInputStream.readClassDescriptor(ChunkedObjectInputStream.java:361)
     at java.io.ObjectInputStream.inputClassDescriptor(ObjectInputStream.java:901)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:361)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
     at java.io.ObjectInputStream.inputArray(ObjectInputStream.java:1009)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
     at java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:2258)
     at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:514)
     at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1407)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
     at weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:140)
     at weblogic.rjvm.ResponseImpl.getThrowable(ResponseImpl.java:117)
     at weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:106)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:262)
     at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:229)
     at weblogic.jndi.internal.ServerNamingNode_WLStub.lookup(Unknown Source)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:337)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:332)
     at javax.naming.InitialContext.lookup(InitialContext.java:345)
     at testjbossejb.EntityTester.main(EntityTester.java:40)--
Dimitri

Similar Messages

  • Hard drive error: Some information was unavailable during an internal lookup

    I tried upgrading my hard drive on my 13" MacBook Pro (mid-2010)  to a solid state drive.  When I did, I encountered a problem where I could not boot from my internal drive.
    It boots fine from the external drive that I used to clone my old HHD.
    When I run repair disk in disk utility I get an error:
    Problems were encountered during repair of the partition map
    Error: Some information was unavailable during an internal lookup.
    Running repair disk on the external drive returns no errors.
    My first thought was I have a bad SATA cable.  After replacing the SATA cable, I am still having the problem.
    Anyone have any ideas on what could be the problem?  SATA Connector on the motherboard failed?
    Thanks in advance.

    I formatted it a Mac OS Extended (Journaled) using the Erase function in Disk Utility then copied the contents of my HD using Restore in Disk Utility.  It seemed to copy all of the contents correctly.  It boots from the external drive.
    The problem starts when I put it in the computer and try to boot internally.  It will not boot.  Also, my old HD will also not boot internally now either.

  • Wrong credentials entered during Client update

    Hi,
    We have a production site where ODS transfer have stopped working after an upgrade
    from 6.0.4.12 to 6.0.4.18.
    I am suspecting that the wrong database credentials have been given during client upgrade and
    I want to change them to make sure they are correct. Since this is now encrypted information
    I have no file that I can update.
    How can I change the created database credentials after an update to the client is done?
    Best regards,
    Johan

    Hi Johan,
    Please check SAP Note 1959267.
    Regards,
    Sergiy

  • 11gr2 client installation hangs during client installation

    hi
    11gr2 client installation hangs during client installation during "perform pre-requisit test"-- what to do??
    server oel 5.6
    db 11gr2
    client 11gr2
    os win xp prof 32 bit
    java jre 6u24
    netbeans 6.9.1
    kind regards
    Edited by: SYSAPPSDBATSM(EBZ11,R12)1152046c on Mar 25, 2011 3:40 PM

    hi
    INFO: Completed validating state <init>
    INFO: Verifying route success
    INFO: Get view named [InstallTypesUI]
    INFO: size estimation for InstantClientinstall is 174.04894161224365
    INFO: size estimation for Administratorinstall is 1046.229476928711
    INFO: size estimation for Runtimeinstall is 754.2802858352661
    INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@1cf243b
    INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
    INFO: InstallTypesPane installType is: InstantClient
    INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
    INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
    INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
    INFO: Loading view <InstallTypesUI> at state <clientInstallType>
    INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
    INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
    INFO: size estimation for InstantClientinstall is 174.04894161224365
    INFO: size estimation for Administratorinstall is 1046.229476928711
    INFO: size estimation for Runtimeinstall is 754.2802858352661
    INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientInstallType
    INFO: Completed executing action at state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Client Install Type set in InstallTypeUI is : Custom
    INFO: Validating view at state <clientInstallType>
    INFO: Completed validating view at state <clientInstallType>
    INFO: Validating state <clientInstallType>
    WARNING: Validation disabled for the state clientInstallType
    INFO: Completed validating state <clientInstallType>
    INFO: In Transition of InstallTypesAction:
    INFO: Verifying route ic_no
    INFO: Get view named [ProductLanguageUI]
    INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@a16157
    INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
    INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
    INFO: Fetching Available Languages...
    INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
    INFO: Loading view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
    INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state productLanguage
    INFO: Waiting for completion all forked tasks at state productLanguage
    INFO: All forked task are completed at state productLanguage
    INFO: Completed background operations
    INFO: Executing action at state productLanguage
    INFO: Completed executing action at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: The languages in which the product will be installed are [en]
    INFO: Validating view at state <productLanguage>
    INFO: Completed validating view at state <productLanguage>
    INFO: Validating state <productLanguage>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
    INFO: Completed validating state <productLanguage>
    INFO: Verifying route productlanguage_yes
    INFO: Get view named [InstallLocationUI]
    WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
    WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
    INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@ba8fce
    INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state getOracleHome
    INFO: Completed executing action at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Validating view at state <getOracleHome>
    INFO: Completed validating view at state <getOracleHome>
    INFO: Validating state <getOracleHome>
    INFO: custom prereq file name: oracle.client_Custom.xml
    INFO: refDataFile: C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: InstallAreaControl exists: true
    INFO: isNewHome= true isORCAHome=false
    INFO: Checking:NEW_HOME
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:ORCA_HOME
    INFO: Reading shiphome metadata from C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
    INFO: Loading beanstore from file:/C:/Documents and Settings/DBA/Desktop/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Documents and Settings/DBA/Desktop/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: size estimation for Administratorinstall is 1046.229476928711
    INFO: PATH has :==>C:\DOCUME~1\DBA\LOCALS~1\Temp\OraInstall2011-03-26_10-46-45AM\jdk\jre\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Common Files\NetSarang;C:\Program Files\PC Connectivity Solution\;C:\app\DBA\product\11.1.0\db_2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\WinSCP\;C:\Program Files\QuickTime\QTSystem\
    INFO: Completed validating state <getOracleHome>
    INFO: InstallLocationAction to INVENTORY_YES_CUSTOM_YES
    INFO: Verifying route INVENTORY_YES_CUSTOM_YES
    INFO: Get view named [CustomInstallUI]
    INFO: Re-loading component config bean
    INFO: Loading beanstore from jar:file:/C:/Documents%20and%20Settings/DBA/Local%20Settings/Temp/OraInstall2011-03-26_10-46-45AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Documents%20and%20Settings/DBA/Local%20Settings/Temp/OraInstall2011-03-26_10-46-45AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    INFO: Resolving dependencies
    INFO: View for [CustomInstallUI] is oracle.install.ivw.client.view.CustomInstallGUI@1473a2e
    INFO: Initializing view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Completed initializing view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Displaying view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Completed displaying view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Loading view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Completed loading view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Localizing view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Completed localizing view <CustomInstallUI> at state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientCustomInstall
    INFO: Completed executing action at state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Client Custom Install Selection.  map = {}
    INFO: Validating view at state <clientCustomInstall>
    INFO: Completed validating view at state <clientCustomInstall>
    INFO: Validating state <clientCustomInstall>
    INFO: Completed validating state <clientCustomInstall>
    INFO: Verifying route TO_ENDCUSTOM
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state prereqExecutionDecider
    INFO: Completed executing action at state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <prereqExecutionDecider>
    INFO: Completed validating view at state <prereqExecutionDecider>
    INFO: Validating state <prereqExecutionDecider>
    WARNING: Validation disabled for the state prereqExecutionDecider
    INFO: Completed validating state <prereqExecutionDecider>
    INFO: Verifying route executeprereqs
    INFO: Get view named [PrereqUI]
    INFO: View for [PrereqUI] is [email protected]77
    INFO: Initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Loading view <PrereqUI> at state <checkPrereqs>
    INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
    INFO: Localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state checkPrereqs
    INFO: custom prereq file name: oracle.client_Custom.xml
    INFO: refDataFile: C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: Completed executing action at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state checkPrereqs
    INFO: Waiting for completion all forked tasks at state checkPrereqs
    INFO: Creating PrereqChecker Job for leaf task Physical Memory
    INFO: Creating CompositePrereqChecker Job for container task Free Space
    INFO: Creating PrereqChecker Job for leaf task Free Space: dba-077754d77ea:C:\DOCUME~1\DBA\LOCALS~1\Temp
    INFO: Creating PrereqChecker Job for leaf task Architecture
    INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
    INFO: CVU tracingEnabled = false
    INFO: Nodes are prepared for verification.
    INFO: *********************************************
    INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:dba-077754d77ea
    INFO: Expected Value:128MB (131072.0KB)
    INFO: Actual Value:1.9906GB (2087276.0KB)
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Free Space: dba-077754d77ea:C:\DOCUME~1\DBA\LOCALS~1\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:dba-077754d77ea
    INFO: Expected Value:130MB
    INFO: Actual Value:12.5322GB
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:dba-077754d77ea
    INFO: Expected Value:32-bit
    INFO: Actual Value:32-bit
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:dba-077754d77ea
    INFO: Expected Value:1023
    INFO: Actual Value:235
    INFO: -----------------------------------------------
    INFO: All forked task are completed at state checkPrereqs
    INFO: Completed background operations
    INFO: Moved to state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <checkPrereqs>
    INFO: Completed validating view at state <checkPrereqs>
    INFO: Validating state <checkPrereqs>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
    INFO: Completed validating state <checkPrereqs>
    INFO: Verifying route success
    INFO: Get view named [SummaryUI]kind regards

  • Note 947091 - Persistance Exception on Client-"Entity key already exists."

    Persistance Exception on Client-"Entity key already exists."
    I am using SP18.
    Tell me what is the <b>correction steps</b> for this PROGRAM ERROR.
    did SP19 already solve this problem??
    Message was edited by:
            yzme yzme
    Message was edited by:
            yzme yzme

    <b>step 1) when i sync the application , i will get this </b>
    Exception while proccessing method SMARTSYNC : java.lang.IllegalStateException: No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E : No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E 
    • Exception while proccessing method SMARTSYNC : java.lang.IllegalStateException: No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E : No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E 
    • Exception while proccessing method SMARTSYNC : java.lang.IllegalStateException: No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E : No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E 
    <b>step 2)i modify on the values 1st time, and sync</b>
    Persistance Exception on Client-"Entity key already exists."
    <b>step 3)after that i modify same row with different values</b>
    Creation on Field cZFLIGHT2_010_PAYMENTSUM with value 1600 is not allowed because SyncBo of Row 0001213668 is CHANGED_GLOBAL_INSYNC and CreateInputQualifyType is FORBIDDEN
    b)step 4) try to check the merep_mon, consequtive row with action "M" and no "D"</b>
    try to check the worklist with seq no 8
    msg: No download data from R/3 found in downloader
    <b>step 5) try to sync again</b>
    • Synchronization started 
    • Connection set up (without proxy) to: http://emi-sap:50100/meSync/servlet/meSync?~sysid=N01& 
    • Successfully connected with server. 
    • Processing of inbound data began. 
    • Exception while proccessing method SMARTSYNC : java.lang.IllegalStateException: No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E : No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E 
    • Exception while proccessing method SMARTSYNC : java.lang.IllegalStateException: No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E : No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E 
    • Exception while proccessing method SMARTSYNC : java.lang.IllegalStateException: No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E : No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E 
    • Exception while proccessing method SMARTSYNC : java.lang.IllegalStateException: No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E : No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E 
    • Exception while proccessing method SMARTSYNC : java.lang.IllegalStateException: No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E : No Context available for ConversationId 47AF7ABD0FEF894BBF49E61E6732223E 
    • Exception while proccessing method SMARTSYNC : java.lang.RuntimeException: Inbound processing of container with index 7 failed: Cannot insert as entity already exists for IClassDescriptor/Key: sZFLIGHT2_010/1213683 : r0001213682 : Inbound processing of container with index 7 failed: Cannot insert as entity already exists for IClassDescriptor/Key: sZFLIGHT2_010/1213683 : r0001213682
    anyone can pls tell me if my coding got problem, i just have to modify the row values, and upload it, or do i need to do anything on the uploader/or SyncBoDelta
    my code for modifying values,
    i have change the values of "STREET" to <b>"ANG MO KIO"</b>
    http://i192.photobucket.com/albums/z231/yzme/d1.gif
    but the data in server still <b>"HEAVEN ST"</b>
    http://i192.photobucket.com/albums/z231/yzme/d1.gif
    public String modifyRecordAmt(String eventName,boolean didNavigate){
                             String syncBoName="ZFLIGHT2";
                             String syncKey="0001213682";
                             tableViewBean.setString(syncBoName +" "+syncKey);
                             System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
                             tcp = TableContentProvider.instance(syncBoName);
                             tcp.modifyTable(syncBoName,syncKey);                                   return JSP_DETAIL_SYNCBOINSTANCE;
    public void modifyRecordAmt(String syncBoName,String syncKey){
                System.out.println("modifyRecordAmt");
                SyncBoDescriptor sbd=null;
                sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
                System.out.println("bp 1");
                SyncBo sb=null;
                SyncBo sb2=null;
                try{
                   System.out.println("bp 2");
                     sb=dataFacade.getSyncBo(sbd,syncKey);
                     //sb2=dataFacade.getSyncBo(sbd,"010");
                   System.out.println("bp 3");
                }catch(PersistenceException pex){
                     System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
                SmartSyncTransactionManager transactionManager;
                try{
                   System.out.println("bp 4");
                     transactionManager=dataFacade.getSmartSyncTransactionManager();
                   System.out.println("bp 5");
                     if(!transactionManager.isTransactionStarted()){
                        System.out.println("bp 6");
                          transactionManager.beginTransaction();
                        System.out.println("bp 7");
                          boolean b1,b2,b3,b4,b5,b6,b7,b8;
                          //b1=setHeaderFieldValue2(sb,"CARRID","AA");
                         //b2=setHeaderFieldValue2(sb,"CONNID","0017");
                          //b3=setHeaderFieldValue2(sb2,"FLDATE","2005-10-10");
                          //b4=setHeaderFieldValue2(sb2,"COUNTRYFR","US");
                          //b5=setHeaderFieldValue2(sb2,"CITYFROM","NEW YORK");
                         // b6=setHeaderFieldValue2(sb2,"AIRPFROM","JFK");
                         // b7=setHeaderFieldValue2(sb2,"SEATSOCC","375");
                         b8=setHeaderFieldValue2(sb,"PAYMENTSUM","1600");
                         //b8=setHeaderFieldValue2(sb,"CITYTO","YORK");
                        System.out.println("bp 8");
                        System.out.println("b8=" +b8);
                        //System.out.println(b3 +" " +" "+b4 +" "+b5 +" " +b6 +" "+b7 +" " +b8);
                          transactionManager.commit();
                        System.out.println("bp 9");
                }catch(Exception e){
                     System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
         public boolean setHeaderFieldValue2(
              SyncBo sb,
              String headerFieldName,
              Object value) {
              SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
              //RowDescriptor trd = sbd.getTopRowDescriptor();
              System.out.println("bp 10");
              RowDescriptor trd=sbd.getRowDescriptor("010");
              System.out.println("bp 11");
              FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
              System.out.println("fd:" +fd.getFieldName());
              if (fd != null) {
              BasisFieldType bft = fd.getFieldType();
              //Row header = sb.getTopRow();
              System.out.println("bp 12");
              //Row header = null;
              Row[] header=null;
              //try {
                   //header = sb.getRow("0001211181");
                   //header=sb.getTopRow();
                   header=getItemInstances(sb,"010");
                   if(header==null){
                        System.out.println("is null");
                   }else{
                        System.out.println("not null");
              //} catch (PersistenceException e1) {
                   // TODO Auto-generated catch block
              //     System.out.println("Exception getRow:" +e1.getMessage());
              //     e1.printStackTrace();
              System.out.println("bp 13");
              try {
    //             Integer operator
              if (bft == BasisFieldType.N) {
                   System.out.println("Numeric");
              NumericField nf = header[0].getNumericField(fd);
              if (nf != null) {
              BigInteger ii = new BigInteger(value.toString());
              nf.setValue(ii);
              return true;
              } else {
              return false;
    //             Character operator
              if (bft == BasisFieldType.C) {
                   System.out.println("Character");
              CharacterField cf = header[0].getCharacterField(fd);
              if (cf != null) {
              cf.setValue(value.toString());
              return true;
              } else {
              return false;
    //             Decimal operator
              if (bft == BasisFieldType.P) {
                   System.out.println("Decimal");
              DecimalField df = header[0].getDecimalField(fd);
              System.out.println("bp 1.1");
              if (df != null) {
                   System.out.println("bp 1.2");
              BigDecimal bd = new BigDecimal(value.toString());
              System.out.println("bp 1.3");
              df.setValue(bd);
              System.out.println("bp 1.4");
              return true;
              } else {
                   System.out.println("bp 1.5");
              return false;
    //             Similar operation for time and date operator fields
              if (bft == BasisFieldType.D) {
                   System.out.println("Date");
              DateField df = header[0].getDateField(fd);
              if (df != null) {
              if (value.toString().equals("0")) {
              Date dat = Date.valueOf("0000-00-00");
              df.setValue(dat);
              } else if (!value.toString().equals("")) {
              Date dat = Date.valueOf(value.toString());
              df.setValue(dat);
              } else {
              Calendar cal = Calendar.getInstance();
              java.sql.Date bd =
              new java.sql.Date(cal.getTime().getTime());
              df.setValue(bd);
              return true;
              } else {
              return false;
    //             Similar operation for time and date operator fields
              } catch (SmartSyncException ex) {
              System.out.println(ex.getMessage());
              } catch (PersistenceException e) {
              System.out.println(e.getMessage());
              return false;
    how to check in the table if the data is uploaded to the Middleware RDB ??
    anyone

  • WLC 5508 and WPA/WPA2 causes client DNS lookups to fail

    Hi all, we just recently received a brand new 5508 with 6.0.199.4 firmware.  We currently have three LAP-1250s that associate just fine to the WLC.
    For testing purposes only, we enabled WPA2 with both types of encryption TKIP and AES with an ASCII PSK.   The clients are able to connect, authenticate and get an IP address from our local (same subnet) DHCP server.  They also get the DNS info from our DHCP server.   However, the problem is that they are not able to do any DNS lookups.   I haven't run wireshark yet to confirm, but it sounds very familiar to this problem: https://supportforums.cisco.com/message/3202369
    I've even had clients use nslookup with both of my DNS servers and they are not able to resolve.  I'm not sure if the request or the reply is being blocked/dropped, but I can find out tomorrow.
    Now the strange part - if I turn off WLAN security altogether, it works!   That's right, I just disable L2 security for the WLAN and re-connect the clients and they are able to do full DNS lookups.
    AND - if I leave L2 security configured (WPA2 with PSK), and enable L3 Passthrough security - the clients get to the auth web page, click the "accept" button and are then able to do full DNS lookups too.
    What could be the problem here?   There's nothing I see configured for the L2 or L3 security settings that could be the culprit.  We're using default (from Cisco) configuration, so there's no ACLs configured or anything like that to block DNS.
    Another strange thing here which may or not be related - during initial configuration the setup asked for a virtual IP - so I gave it one - 1.1.2.2.   Now when I do an ipconfig /all on the client, I see this 1.1.2.2 address listed as the DHCP server.  Why is this?   It's definitely getting an IP address and DNS info from the correct DHCP server, so not sure why this is showing up.
    Thanks, Matt

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    Hi Matt,
    Just wanted to jump in, and also mention it may be worth attempting to disable the fastpath feature on the 5508, and test your failing client again.  You may be hitting CSCti34667.
    debug fastpath cfgtool --fc.disable
    This command can be run via Telnet/SSH.  Please keep in mind that fastpath will automatically re-enable periodically, so we recommend disabling every 10 minutes as a workaround for any known fastpath issues.  You can do so by running the following Macro in TeraTerm:
    :mainloop
       sendln "debug fastpath cfgtool --fc.disable"
       pause 600
    goto mainloop
    If you find that disabling fastpath resolves your concern, you can reach out to TAC for an Escalation Image with the fix for this one.
    Best,
    Drew

  • Exception during client synchronization in Mobile 7.1

    Hello,
    We are working with Mobile 7.1. We changed one of the records from the client side in the table M45NOTIFICATION (the automatically created table for NOTIFICATION Data Object). During the synchronization with the DOE, the changes passed successfully and the record was updated in the backend.
    On the next synchronization the DOE tried to pass the feedback to the client but the exception was thrown. When we checked the trace file on the client, we found that the program was trying to perform SELECT from the table that doen't exist - M33NOTIFICATION instead of M45NOTIFICATION!
    Please, see the trace attached below.
    <r id="1228227880372" t="16:24:40" d="2008-12-02" s="E" c="000" u="" g="" m="SELECT M33NOTIFICATION.&quot;SYNCSTATE&quot;,M33NOTIFICATION.&quot;TXID&quot;,M33NOTIFICATION.&quot;PREVTXID&quot; FROM M33NOTIFICATION WHERE M45NOTIFICATION.&quot;SYNCKEY_MMW&quot; = 00155D1E651E1DEDB08F1206C9EE5F0E --&gt; com.sap.dbtech.jdbc.exceptions.DatabaseException: [-4004] (at 91): Unknown table name:M33NOTIFICATION
         at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:63)
         at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:953)
         at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:593)
         at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:461)
         at com.sap.dbtech.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:820)
         at com.sap.dbtech.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:884)
         at com.sap.dbtech.jdbc.StatementSapDB.execute(StatementSapDB.java:259)
         at com.sap.dbtech.jdbc.StatementSapDB.executeQuery(StatementSapDB.java:413)
         at com.sap.dbtech.jdbc.trace.Statement.executeQuery(Statement.java:80)
         at com.sap.tc.mobile.cfs.pers.jdbc.spi.Database.doExecuteQuery(Database.java:574)
         at com.sap.tc.mobile.cfs.pers.jdbc.core.JDBCPersistenceSink.executeQuery(JDBCPersistenceSink.java:1138)
         at com.sap.tc.mobile.cfs.pers.jdbc.core.JDBCPersistenceSink.executeQuery(JDBCPersistenceSink.java:381)
         at com.sap.tc.mobile.cfs.pers.cache.DefaultPersistenceManager.executeQuery(DefaultPersistenceManager.java:2162)
         at com.sap.tc.mobile.cfs.pers.cache.DefaultPersistenceManager.executeQuery(DefaultPersistenceManager.java:2385)
         at com.sap.tc.mobile.cfs.mbosync.InboundProcessor.loadMBONodeData(InboundProcessor.java:846)
         at com.sap.tc.mobile.cfs.mbosync.InboundConfirmationProcessor.finishNodeLocal(InboundConfirmationProcessor.java:342)
         at com.sap.tc.mobile.cfs.mbosync.InboundProcessor.finishNode(InboundProcessor.java:480)
         at com.sap.tc.mobile.cfs.mbosync.MBOInboundMessageProcessor$XmlContentHandler.endElement(MBOInboundMessageProcessor.java:625)
         at com.sap.tc.mobile.cfs.xml.api.MIXMLParser$ElementParser.parse(Unknown Source)
         at com.sap.tc.mobile.cfs.xml.api.MIXMLParser.parseInternal(Unknown Source)
         at com.sap.tc.mobile.cfs.xml.api.MIXMLParser.parse(Unknown Source)
         at com.sap.tc.mobile.cfs.mbosync.MBOInboundMessageProcessor.messageReceived(MBOInboundMessageProcessor.java:202)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.callInboundMessageProcessor(SyncManagerImpl.java:1854)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.callInboundMessageProcessor(SyncManagerImpl.java:1837)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.processOutStandingMessages(SyncManagerImpl.java:393)
         at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.syncOnce(HttpSynchronizer.java:724)
         at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.synchronize(HttpSynchronizer.java:600)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.synchronizeOnce(SyncManagerImpl.java:619)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.synchronize(SyncManagerImpl.java:451)
         at com.sap.tc.mobile.cfs.sync.spi.SyncManagerSPI.synchronize(SyncManagerSPI.java:693)
         at com.sap.tc.mobile.cfs.sync.spi.SyncManagerSPI.synchronizeStart(SyncManagerSPI.java:675)
         at com.sap.tc.mobile.cfs.sync.spi.impl.SyncCoordinator.startSync(SyncCoordinator.java:138)
         at com.sap.tc.mobile.mwd.laptop.container.SyncProgress$SyncThread.run(SyncProgress.java:567)
         at java.lang.Thread.run(Unknown Source)
    ">
    <f n="ThreadName" v="Thread-49"/>
    </r>
    <r id="1228227880373" t="16:24:40" d="2008-12-02" s="E" c="000" u="" g="" m="Error while processing inbound message of type 00155D1E651E1DEDAFF171D112C07F0E with id 678 and message content &quot;&lt;?xml version=&quot;1.0&quot; encoding=&quot;utf-8&quot;?&gt;&lt;Msg type=&quot;C&quot; id=&quot;3346&quot;&gt;&lt;NOTIFICATION C3=&quot;SERGEY TEST&quot; C0=&quot;00155D1E651E1DEDB08F1206C9EE5F0E&quot; ty=&quot;U&quot; tv=&quot;00155D1E651E1DEDB08F8C1F85573F0E&quot;/&gt;&lt;/Msg&gt;&quot; --&gt; com.sap.tc.mobile.cfs.pers.jdbc.spi.JDBCException: SQL Exception with message: [-4004] (at 91): Unknown table name:M33NOTIFICATION / State: 42000 / ErrorCode: -4004
         at com.sap.tc.mobile.cfs.pers.jdbc.core.JDBCPersistenceSink.executeQuery(JDBCPersistenceSink.java:1156)
         at com.sap.tc.mobile.cfs.pers.jdbc.core.JDBCPersistenceSink.executeQuery(JDBCPersistenceSink.java:381)
         at com.sap.tc.mobile.cfs.pers.cache.DefaultPersistenceManager.executeQuery(DefaultPersistenceManager.java:2162)
         at com.sap.tc.mobile.cfs.pers.cache.DefaultPersistenceManager.executeQuery(DefaultPersistenceManager.java:2385)
         at com.sap.tc.mobile.cfs.mbosync.InboundProcessor.loadMBONodeData(InboundProcessor.java:846)
         at com.sap.tc.mobile.cfs.mbosync.InboundConfirmationProcessor.finishNodeLocal(InboundConfirmationProcessor.java:342)
         at com.sap.tc.mobile.cfs.mbosync.InboundProcessor.finishNode(InboundProcessor.java:480)
         at com.sap.tc.mobile.cfs.mbosync.MBOInboundMessageProcessor$XmlContentHandler.endElement(MBOInboundMessageProcessor.java:625)
         at com.sap.tc.mobile.cfs.xml.api.MIXMLParser$ElementParser.parse(Unknown Source)
         at com.sap.tc.mobile.cfs.xml.api.MIXMLParser.parseInternal(Unknown Source)
         at com.sap.tc.mobile.cfs.xml.api.MIXMLParser.parse(Unknown Source)
         at com.sap.tc.mobile.cfs.mbosync.MBOInboundMessageProcessor.messageReceived(MBOInboundMessageProcessor.java:202)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.callInboundMessageProcessor(SyncManagerImpl.java:1854)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.callInboundMessageProcessor(SyncManagerImpl.java:1837)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.processOutStandingMessages(SyncManagerImpl.java:393)
         at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.syncOnce(HttpSynchronizer.java:724)
         at com.sap.tc.mobile.cfs.sync.synchronizer.http.HttpSynchronizer.synchronize(HttpSynchronizer.java:600)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.synchronizeOnce(SyncManagerImpl.java:619)
         at com.sap.tc.mobile.cfs.sync.SyncManagerImpl.synchronize(SyncManagerImpl.java:451)
         at com.sap.tc.mobile.cfs.sync.spi.SyncManagerSPI.synchronize(SyncManagerSPI.java:693)
         at com.sap.tc.mobile.cfs.sync.spi.SyncManagerSPI.synchronizeStart(SyncManagerSPI.java:675)
         at com.sap.tc.mobile.cfs.sync.spi.impl.SyncCoordinator.startSync(SyncCoordinator.java:138)
         at com.sap.tc.mobile.mwd.laptop.container.SyncProgress$SyncThread.run(SyncProgress.java:567)
         at java.lang.Thread.run(Unknown Source)
    Caused by: com.sap.dbtech.jdbc.exceptions.DatabaseException: [-4004] (at 91): Unknown table name:M33NOTIFICATION
         at com.sap.dbtech.jdbc.packet.ReplyPacket.createException(ReplyPacket.java:63)
         at com.sap.dbtech.jdbc.ConnectionSapDB.throwSQLError(ConnectionSapDB.java:953)
         at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:593)
         at com.sap.dbtech.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:461)
         at com.sap.dbtech.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:820)
         at com.sap.dbtech.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:884)
         at com.sap.dbtech.jdbc.StatementSapDB.execute(StatementSapDB.java:259)
         at com.sap.dbtech.jdbc.StatementSapDB.executeQuery(StatementSapDB.java:413)
         at com.sap.dbtech.jdbc.trace.Statement.executeQuery(Statement.java:80)
         at com.sap.tc.mobile.cfs.pers.jdbc.spi.Database.doExecuteQuery(Database.java:574)
         at com.sap.tc.mobile.cfs.pers.jdbc.core.JDBCPersistenceSink.executeQuery(JDBCPersistenceSink.java:1138)
         ... 23 more
    ">
    <f n="ThreadName" v="Thread-49"/>
    </r>
    <r id="1228227880374" t="16:24:40" d="2008-12-02" s="E" c="000" u="" g="" m="Message processing failed, please consult administrator">
    <f n="SourceName" v=" [/CFS/Sync]"/>
    <f n="LocationName" v=" (com.sap.tc.mobile.cfs.sync.api.SyncManager:postMessage)"/>
    <f n="ThreadName" v="Thread-49"/>
    </r>
    Why does the program refer to the unexistinf table?
    Waiting for your help,
    Sergey

    Hi,
    Do you have more than one application which uses the same data object(NOTIFICATION) and backend tables?
    If yes when you changed the data in M45NOTIFICATION, the backend table also got updated, now when the confirmation comes from the backend it is trying to update all the notification tables on the client.
    You can deactivate the rule for the any other applications other than the one you are updating for NOTIFICATION and try again.
    Hope this helps.
    Thanks and Regards,
    Narayani

  • Client Copy error during client export / RX file is not getting

    Hi Experts,
    During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
    In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
    Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
    Regards,
    Haris

    Hi Experts,
    During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
    In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
    Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
    Regards,
    Haris

  • Client Copy error during client export / RX file is not getting generated

    Hi Experts,
    During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
    In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
    Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or  please let me know whether there is any option to avoid this error while during a fresh export again.
    Regards,
    Haris

    Hi Experts,
    During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
    In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
    Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
    Regards,
    Haris

  • How to add computer to Intune group during client deployment?

    I'm deploying the Windows Intune client as a task sequence in MDT and using Intune to deploy Office 2010. 
    How can I automatically add the newly imaged computer to a Windows Intune group during the client deployment so that Intune will begin pushing the required software immediately?
    Thanks.
    Jeff Guillet, MVP, MCITP:Enterprise Messaging Administrator, MCSE, CISSP | http://www.expta.com
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

    Hi Jeff,
    You have 3 options.
    1.  Create a group that includes all computers as the parent
    2.  Create a group based on a specific domain the computers belong to
    3.  Create a group based on a specific OU the computers belong to.
    Currently that's the only dynamic way to have computers automatically join a device group upon enrollment.
    Thanks,
    Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

  • JAVA client JNDI lookup for EJB session in cluster in WLS 5.1

    The documentation says :
              to obtain a Context for JNDI lookup do the following :
              Hashtable ht = new Hashtable();
              ht.put(Context.INITIAL_CONTEXT_FACTORY,
              "weblogic.jndi.WLInitialContextFactory");
              ht.put(Context.PROVIDER_URL, "t3://mycluster:7001");
              try {
              Context ctx = new InitialContext(ht);
              // Do the client's work
              catch (NamingException ne) {
              // A failure occurred
              finally {
              try {ctx.close();}
              catch (Exception e) {
              // a failure occurred
              where "mycluster" is the DNS name of my cluster. My DNS server (Windows 200
              DNS server) use round robin
              to call alernatively all the wls server node in "mycluster" and it's OK. The
              two servers of my cluster
              are called alternatively for my EJB session stateless.
              Now I unplug one of the two nodes of my cluster and the remaining server is
              called only 2 times
              and not after.
              Questions :
              -is the load balancing between the nodes of mycluster only rely on DNS or
              is there an internal
              mecanism in EJB sub to try one server then an other ?
              - do I need to obtain a new reference on JNDI Context for each call ?
              Thank's a lot.
              Farid Bellameche.
              

              I too have the same problem. My scenario is :
              I have the web tier architecture away from cluster. All ejbs are in cluster
              running in two seperate machines. We have a factory class running in
              webtier(we use servlet in this tier) which obtains home interface only once
              and stores it for future reference. When ever we need the remoteobject stub,
              we ask the factory class and which in turn uses the stored home interface to
              get the same.
              In the webtier, I list all the servers in the cluster as a part of url as
              mentioned by you.
              I started the web tier as well as Object tier cluster. I could see the
              request coming in both the machines in the cluster for the ejb. But When I
              bring one the server in the cluster,
              1. Web tier throws an exception saying that it could not connect
              to server using t3.
              2. The other machine which is running the server, also says
              'failed to create socket to : -32323234324 sever name
              using protocol t3.
              It looks like I am able to get load balance. But I am not able to get the
              fail over to be working.
              In the weblogic-ejb-jar.xml, I added the following.
              <clustering-descriptor>
              <home-is-clusterable>true</home-is-clusterable>
              <home-load-algorithm>round-robin</home-load-algorithm>
              </clustering-descriptor>
              I compiled and added the .jar file. So the jar file now has replica aware
              stubs.
              Could any one of you help me for why the fail over is not working?
              Suersh
              "Giri Alwar" <[email protected]> wrote in message
              news:[email protected]...
              > Farid,
              > (1) Yes, the stub has the logic to perform load-balancing and
              fail-over.
              > (2) In almost all cases, no. You can get the context once, store it
              and
              > use it thereafter. Please refer to
              > http://www.weblogic.com/docs51/cluster/concepts.html#1025061 for more
              info.
              >
              > A couple of notes on your situation. From what you are describing, your
              > Windows DNS server is setup to serve only one IP from the cluster (using
              > round-robin) as opposed to a list of all IP's in the cluster. Hence, the
              > initial context you obtain is tied to a single server in the cluster (the
              > one returned by the DNS). The weblogic implementation on the client side
              has
              > no idea of the existence of the other servers in the cluster. This is not
              a
              > cluster aware context. To obtain a cluster aware context, either list all
              > the IP's in the URL like t3://server1,server2,server3:7001 or have
              > "mycluster" return a list of all servers in the cluster.
              >
              > Giri
              >
              >
              > "Farid Bellameche" <[email protected]> wrote in message
              > news:[email protected]...
              > > The documentation says :
              > >
              > > to obtain a Context for JNDI lookup do the following :
              > > Hashtable ht = new Hashtable();
              > > ht.put(Context.INITIAL_CONTEXT_FACTORY,
              > > "weblogic.jndi.WLInitialContextFactory");
              > > ht.put(Context.PROVIDER_URL, "t3://mycluster:7001");
              > > try {
              > > Context ctx = new InitialContext(ht);
              > > // Do the client's work
              > > }
              > > catch (NamingException ne) {
              > > // A failure occurred
              > > }
              > > finally {
              > > try {ctx.close();}
              > > catch (Exception e) {
              > > // a failure occurred
              > > }
              > > }
              > >
              > > where "mycluster" is the DNS name of my cluster. My DNS server (Windows
              > 200
              > > DNS server) use round robin
              > > to call alernatively all the wls server node in "mycluster" and it's OK.
              > The
              > > two servers of my cluster
              > > are called alternatively for my EJB session stateless.
              > > Now I unplug one of the two nodes of my cluster and the remaining server
              > is
              > > called only 2 times
              > > and not after.
              > >
              > > Questions :
              > > -is the load balancing between the nodes of mycluster only rely on DNS
              > or
              > > is there an internal
              > > mecanism in EJB sub to try one server then an other ?
              > >
              > > - do I need to obtain a new reference on JNDI Context for each call ?
              > >
              > >
              > > Thank's a lot.
              > >
              > > Farid Bellameche.
              > >
              > >
              > >
              > >
              >
              >
              

  • Error during Client Export err:

    Dear Experts,
    We are on 4.7 EE, Oracle 10.2.0.4 and Windows 2003 (32 Bit with 2GB RAM) (QLY system)and our database size is close to 600 GB.
    I have successfully restored my PRD data to QLY and now my QLY is running fine with no hiccups.
    I wanted to do the same to my DEV(which was on 9.2.0.5 now upgraded to 10G) but things are not moving good as expected.
    I first tried a database backup/restore which was not successful, then i tried a system copy from QLY--> DEV but the system copy failed due to some memory issues. Finally i opted for a client export which also is failing.
    All i assume is that the QLY memory is not sufficient for these activities. I have also set the parameter recommendations for 10G based on the SAP Note: 830576.
    The following is the error during a client export
    =====================================================================================================
    2EETW000 sap_dext called with msgnr "2":
    2EETW000 -
    db call info -
    2EETW000 function:   db_setget
    2EETW000 fcode:      RT_GET (0)
    2EETW000 tabname:    COEP                         
    2EETW000 len:        3
    2EETW000 key:          
    2EETW000 ok fetches: 33871957
    2EETW000 last entry: 08710000305427330002010
    2EETW000 retcode:    2
    2EETW125 SQL error "4030" during "" access: "ORA-04030: out of process memory when trying to allocate 64528 bytes (sort subheap,sort key)"
    4 ETW000 ROLLBACK (1852108487).
    2EETP200 Export with errors, request will not be imported
    1 ETP150 MAIN EXPORT
    1 ETP110 end date and time   : "20100512075209"
    1 ETP111 exit code           : "12"
    =====================================================================================================
    When i searched based on the SQL error 4030 i had many replies suggesting to increase my pga and other memory related parameters.
    Can anyone suggest me the optimal parameter recommendations based on the size of my RAM(2GB) for my Oracle and SAP please.
    We are in the process of increasing it to 4GB very soon.
    Awaiting a helpful reply
    Thanks in advance
    Hunky

    If it is working on your QLY system, just use the same parameter set as there..
    Kind regards,
    Mark

  • SYSTEM_NO_TASK_STORAGE during client export

    Hello all!
    I hope you can help me with this problem.
    I'm getting a SYSTEM_NO_TASK_STORAGE dump during a client export.
    My system is on Windows 2003 Std Server. I have 4gb of RAM and 20gb of Page file.
    My current isntance profiles is the following:
    enque/table_size                     8192                                     
    rdisp/max_wprun_time             1000                                     
    rsdb/cua/buffersize                  4000                                     
    rdisp/PG_SHM                        10000                                    
    rdisp/PG_MAXFS                    80000                                    
    rdisp/ROLL_SHM                    20000                                    
    rdisp/ROLL_MAXFS                20000                                    
    abap/heap_area_nondia       2000000000                               
    abap/buffersize                       600000                                   
    login/system_client                   600                                      
    zcsa/system_language              S                                        
    zcsa/installed_languages         DES                                      
    login/no_automatic_user_sapstar 0                                        
    SAPSYSTEMNAME               SMP                                      
    SAPGLOBALHOST        PRODSERVER                               
    SAPSYSTEM                           00                                       
    INSTANCE_NAME           DVEBMGS00                                
    DIR_CT_RUN   $(DIR_EXE_ROOT\$(OS_UNICODE\NTI386     
    DIR_EXECUTABLE        $(DIR_INSTANCE\exe                      
    PHYS_MEMSIZE                4090                                     
    rdisp/wp_no_dia                   10                                       
    rdisp/wp_no_btc                    5                                        
    icm/server_port_0     PROT=HTTP,PORT=80$$                      
    ms/server_port_0      PROT=HTTP,PORT=81$$                      
    rdisp/wp_no_enq                1                                        
    abap/heap_area_dia         2000000000                               
    rdisp/wp_no_vb                          2                                        
    rdisp/wp_no_vb2                      1                                        
    rdisp/wp_no_spo                       1
    Which values do I have to change?
    Thanks!
    Wadih Saad

    Hi Wadih saad,
    I think the memory is not suffcient to hold the load. Check your swap space and memory during the client export and also check whether there is sufficient space in the hard disk to hold the export files.
    You must have calculated the client size by using the test run. This size must be available as free space in hard disk to do the export.
    Make the available space and do the export it will work.
    Regards,
    Maheswaran J

  • Re: 11gr2 client installation hangs during client installation

    Hi I have been having issues with istalling Oracle 11 g client in windows 7. It hangs during installation. Please find the installation log.
    really appreciate the help .
    Thanks
    NFO: InstallLocationAction to INVENTORY_YES
    INFO: Verifying route INVENTORY_YES
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state prereqExecutionDecider
    INFO: Completed executing action at state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <prereqExecutionDecider>
    INFO: Completed validating view at state <prereqExecutionDecider>
    INFO: Validating state <prereqExecutionDecider>
    WARNING: Validation disabled for the state prereqExecutionDecider
    INFO: Completed validating state <prereqExecutionDecider>
    INFO: Verifying route executeprereqs
    INFO: Get view named [PrereqUI]
    INFO: View for [PrereqUI] is [email protected]5
    INFO: Initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Loading view <PrereqUI> at state <checkPrereqs>
    INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
    INFO: Localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state checkPrereqs
    INFO: custom prereq file name: oracle.client_Administrator.xml
    INFO: refDataFile: C:\Oracle_zip_file\stage\cvu\oracle.client_Administrator.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: Completed executing action at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state checkPrereqs
    INFO: Waiting for completion all forked tasks at state checkPrereqs
    INFO: Creating PrereqChecker Job for leaf task Physical Memory
    INFO: Creating CompositePrereqChecker Job for container task Free Space
    INFO: Creating PrereqChecker Job for leaf task Architecture
    INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
    INFO: CVU tracingEnabled = false
    INFO: Preparation of nodes for running verifications failed. Reason:
    - Cause Of Problem Not Available
    INFO: *********************************************
    INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:OPERATION_FAILED
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:A
    WARNING: Result values are not available for this verification task
    INFO: *********************************************
    INFO: Free Space: APPIKATA1:C:\Users\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:OPERATION_FAILED
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:APPIKATA1
    WARNING: Result values are not available for this verification task
    INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\AppData\Local\Temp"
    INFO: Cause: Could not determine mount point for location specified.
    INFO: Action: Ensure location specified is available.
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:OPERATION_FAILED
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:A
    WARNING: Result values are not available for this verification task
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:OPERATION_FAILED
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:APPIKATA1
    WARNING: Result values are not available for this verification task
    INFO: All forked task are completed at state checkPrereqs
    INFO: Completed background operations
    INFO: Moved to state <checkPrereqs>
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Expected value not found.
    INFO: Actual value not found.
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <checkPrereqs>
    INFO: Completed validating view at state <checkPrereqs>
    INFO: Validating state <checkPrereqs>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
    INFO: Completed validating state <checkPrereqs>
    INFO: Verifying route success
    INFO: Get view named [SummaryUI]
    Edited by: user2493512 on Sep 20, 2012 11:30 PM

    Pl post exact versions of "11g" and "Windows 7" - Home versions are not supported - you will need Professional or higher.
    Looks like the "-ignoreSysprereqs" flag was used for the install - is there a reason for this ?
    HTH
    Srini

  • Fetching Data from Another Entity (Lookup) - Done in 4.0 and needs to be done in 2013

    We have a situation where we need to grab associated fields from a filtered lookup.  We're willing to use javascript in conjunction with with either odata, soap or fetchxml.  The goal is to bring in numbers from a custom entity and then fill in
    fields to do mathematical calculations.
    Basically on change of a lookup, you grab data, put it on the form, then perform the calculations.
    Here is how the code used to work.  How would you achieve the objective in 2013?
    function Literature1_onchange()
    if (crmForm.all.ftgbase_literature1id.DataValue != null)
       crmForm.all.ftgbase_quantity1.DataValue = 11;
       crmForm.all.ftgbase_total1.DataValue = null;
       var idToFetch = crmForm.all.ftgbase_literature1id.DataValue[0].id+
       //Create AJAX request
       var xmlhttp = new ActiveXObject("Microsoft.XMLHTTP");
       xmlhttp.onreadystatechange = function() {
           //A value of 4 indicates that the response has been returned
    successfully
           if (xmlhttp.readyState == 4) {
               strXML = xmlhttp.responseText;
               var bundleQty = ReturnValueFromXML
    (strXML,'BundleQuantity');
               var maxQty = ReturnValueFromXML(strXML,'MaxOrderQty');
               if (maxQty != null && maxQty != "null"){
                   crmForm.all.ftgbase_litmax1.DataValue = parseInt
    (maxQty) ;
               }else{
                   crmForm.all.ftgbase_litmax1.DataValue = null;
               if (bundleQty != null && bundleQty != "null"){
                   crmForm.all.ftgbase_bundlequantity1.DataValue =
    parseInt(bundleQty) ;
               }else{
                   crmForm.all.ftgbase_bundlequantity1.DataValue = null;
       GetRecordXML(xmlhttp, UserInfo._orgId, 'GetLiterature', idToFetch,
    'GetLiterature', idToFetch );
    else
       crmForm.all.ftgbase_bundlequantity1.DataValue = null;
       crmForm.all.ftgbase_total1.DataValue = null;
       crmForm.all.ftgbase_quantity1.DataValue = 11;
    We're willing to either get a method working similar to this or go another route, but not a fetchxml grid, we need to preserve historical data.

    Hi,
    To Retrieve from other entity and populate the fields, for example on entering the account name in opportunity form the fields from account form like Sector, Region can be retrieved and can be auto populated in opportunity form using Odata as follows.
    Call the function getAccountDetails in onchange event of Companyname. Do not forget to add Jquery
    and Json in libraries.
    function getAccountDetails() {
        var companyName = Xrm.Page.getAttribute("customerid").getValue();
        if ((companyName != null)) {
            var companyNameValue = companyName[0].name;
            var companyNameID = companyName[0].id;
            var serverUrl = Xrm.Page.context.getServerUrl();
            //The XRM OData end-point
            var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
            var odataSetName = "AccountSet";
            var odataSelect = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "(guid'" + companyNameID + "')";
            //alert(odataSelect);
            $.ajax({
                type: "GET",
                contentType: "application/json; charset=utf-8",
                datatype: "json",
                url: odataSelect,
                beforeSend: function (XMLHttpRequest) { XMLHttpRequest.setRequestHeader("Accept", "application/json"); },
                success: function (data, textStatus, XmlHttpRequest) {
                    var result_account = data.d;
                    var name;
                    var Id;
                    var entityType;
                    //replace the fields with the fields on your entity
                    Xrm.Page.getAttribute("new_sector").setValue(result_account.new_Sector.Value);
                    Xrm.Page.getAttribute("new_region").setValue(result_account.new_Region.Value);                     
                error: function (XmlHttpRequest, textStatus, errorThrown) { alert('OData Select Failed: ' + odataSelect); }
    Also as another option if you donot wat the java script then you can go for a workflow to poplate, please refer this link:  https://www.powerobjects.com/blog/2013/11/25/retrieving-data-from-a-related-entity-crm-2013/
    Reference: link
    Regards, Rekha.J

Maybe you are looking for

  • Can't open photo attachments from Gmail through Safari - Ipad2 ios7.1

    I have an ipad2, running ios7.1 If I try to open a photo attachment from www.gmail.com (in Safari, not Mail app) it causes my ipad to hang. Here's what happens for a 2mb test jpg I just sent myself: 1. Open email in Safari 2. Click on the thumbnail o

  • 2 ipods connected on one computer

    We put one ipod nano on our computer in December- Now, we are trying to put another ipod on for a different user- and the first ipod user's songs continue to download onto ipod #2- and ipod #2 can't download his own music- it automatically goes onto

  • Why do I get a error message when emailing from Lr?

    What am I doing wrong, trying to send Lr email? I get this "Message: Can't send e-mail because some selected photos are missing." I highlight a photo and right click, select 'Send e-mail' and the email form comes up - with the pic thumbnail showing a

  • Help! Trying to Sum Quantity with Duplicate Rows

    I have a database that have the following columns barcode, quantity, etc. The barcode colum has barcode duplicates and the corresponding quantity differs. I have been working hours trying to solve how to sum each different barcode and replace the tab

  • Acrobat installation issues

    Trouble downloading Acrobat Standard. Keep getting the message, "Serial Number you provided is valid, but a qualifying product could not be found of this computer." Please advise!