Newby would appreciate help with List Box
HI all,
In the process of designing a simple form that has a list box containing multiple salary designations.
For each of those designations eg Accountant, Accounts Payable supervisor, I have specified an item value in the Binding tab which happens to be the salary of the position
What I would like to happen is that when a selection is made in the list box i.e. operator selects say Accountant, the item value (in this case the salary) populates another field which is used later for costing calculations.
Help unfortunately is not all that helpfull so would appreciate any assistance you might be able to provide and thanks in anticipation
For example to populate a NumericField1 on the form when the selection was made in ListBox1, you need to use some thing like this.
Place the code in the Exit event of the ListBox. Language is JavaScript.
NumericField1.rawValue = ListBox1.rawValue;
rawValue will give the value that was assigned in the Binding tab.
Hope this helps.
Thanks
Srini
Similar Messages
-
Would appreciate help with applecare difficulties
I have a 1ghz G4 14” ibook that was purchased in December of 2003 along with the extended applecare plan. Since then, I’ve sent it in, under warranty, 4 times for the same problem; this will be my fifth attempt to have the flickering lcd backlight repaired.
This is obviously a problem and complete waste of my time, but what irritates me more is that the ibook has been returned, by applecare, every time with more problems and even damages.
The ibook came back from the first “repair” with light scratches and deep gouges on the outer case plastics. The deep gouges are located on the underside of the ibook, where it looks like the computer was placed on a tool or improper work surface and then slide around. The case plastics are misaligned and poorly reassembled. The lcd backlight problem was unresolved.
The second “repair” replaced the perfectly functioning combo drive for some unknown reason. Now the combo drive scratches discs, misreads discs, and sounds like my garbage disposal. The lcd backlight problem was unresolved. Beginning at this point is when adjusting the display angle can influence the backlight flickering.
Applecare kept my ibook for almost 2 weeks on the third attempted repair. We had an apple genius observe and note the problem with the flickering lcd. Apple told us that the computer would now be fixed because a genius had witnessed and documented the problem. Applecare kept the computer in observation for 2 weeks and then sent it back, functioning improperly, because they couldn’t replicate the already documented problem.
Upon delivery of the fourth “repair” attempt is when I was most disgusted; I found my ibook barely reassembled. It seemed that whoever had worked on my ibook was sick of having it pass through their hands repeatedly and believed that nothing was wrong with it. They decided that destroying my ibook would be a good deterrent against me sending it in again. Besides for the loose screws and open seams along the plastics, the backlight is stuck at about 50% brightness and the clicker/charging board randomly acknowledges mouse clicks and will not charge any of my batteries.
It feels that powerbook repairs take precedence over ibook repairs, because I have had nothing but great service from applecare regarding my rev. a 12" pbg4.
I guess I would just like to hear some suggestions about how to deal with this and have the ibook properly repaired. How do I email apple's customer service? My phone calls just lead all over to people I can't trace and "promises" that aren't documented.
If you're still reading, I appreciate it. Thanks for your help.
LouisYou need to contact Apple Customer Relations. You can get to them (in the US) by dialing the AppleCare Support number, but pressing "0" instead of one of the other options to get to an operator. Ask them to connect you. Be prepared with the dates and case numbers for your previous repairs and the problems your iBook came back with. Be friendly, but firm, and request that this time your iBook is replaced rather than repaired. There's no guarantee they'll agree to it right away, but they may agree that the next time you should get a replacement.
-Doug -
i canot sync the calendar on my ipad mini with my main imac computer. the settings on itunes say that my ipad is syncing over the air but it is not unfortunately. i cant see how to change the settings if need be. would appreciate help. thanks
i have done this on my ipad mini and my imac but they are still not syncing. my iphone 4 has the icloud symbol but it seems to be unresponsive to touch, I cannot get it to highlight or turn-on. Bit confused.
-
How can I set up multiple spaces (desktops) on my new MacBook Pro 10.9.5? I have six set up on my other computer MacBook Pro 10.8.5 but can't find how to do it on this new one. Would appreciate help on this. Cheers.
It's not completely obvious. What you have to do in Spaces is to position your cursor to the upper right of the screen, after which faint + (plus) sign appears in that area. Click that, upon which another Desktop will appear.
The + may be difficult or impossible to see with some desktop backgrounds (black, for instance): -
while notes, reminders and calendar are working fine, keynote (beta) and pages (beta) are not responding, they are sticking. What should I do? I would appreciate help. Thank you.
Unfortunately, most of my advice is in the "hindsight is 20-20" category.
First off, I would never have purchased the peripheral accessories until the 14 day return period had expired. Second, you learned the hard way what the "14 days" really means.
Too bad you didn't do any homework, reading this and other forums and tech sites. Even word of mouth from others. That, more than anything could have steered you towards different phone choices from the get-go and I will leave that there with no further comment other than to say most of the issues you described have been discussed in this forum, ad nauseam.
Once you got into the refurbished phone exchanges, that is where things really went haywire. What someone tells you over the phone is a sketchy proposition, and when it comes down to it, it's your word against theirs.
I think Verizon tried to make it right, though. Remember, they don't make the phones. Don't throw the baby out with the bathwater.
You stated yourself you were a satisfied Verizon customer before this. Had the first two phones performed as they should, you would still be a satisfied Verizon customer.
Doubt any of that will make you any happier, but after you went through the effort of writing such a long post, I thought I'd try. -
I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
ElisabethOpen the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.
-
Hi! I am newbie to Reports need help with check boxes
Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!
and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine. -
Hi i would like help with:
When I draw circle and add stroke I can not see stroke
I use Photoshop CS 5Make sure the stroke is set to a color and not to the symbol that appears here for Fill
-
I am using JDeveloper 10.1.2 with jsp/struts/adf.
I am using the table (repair) used contains a column(rOrder) that is used for ordering the records sequentially.
Created a jsp page containing a data bound list box displaying 10 items from the repair table and sorted by the rOrder column.
Need to reorder the items in the list box and then update the db with the new order.
Is there an example or how to that would provide assistance or a better method to accomplish the task.
Thanks
jebhi.
just check like this.
select f1 f2 from ztable into corresponding field of itab
where condition.
loop at itab into wa_itab where f1 ne 0. " suppose f1 is field which u want to modify
wa_itab-f1 = 0.
modify itab from wa_itab index sy-tabix.
endloop.
Edited by: tahir naqqash on Feb 11, 2009 6:53 PM
Edited by: tahir naqqash on Feb 11, 2009 6:53 PM -
Problem with list box in table control (Module pool) .
Hi,
I'm facing a problem while populating values in List Box..
While I'm clicking a value from the list box it is not being hold in that box...box got blanked.
Please help me to solve this.process before output.
module pop_drop_down.
module pop_drop_down output.
name1 = 'IO5'.
REFRESH list1.
LOOP AT it_zpoitshead INTO wa_zpoitshead.
value1-key = wa_zpoitshead-createdt.
value1-key = wa_zpoitshead-its_ebeln.
APPEND value1 to list1.
ENDLOOP.
CLEAR value1.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name1
values = list1
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule. " pop_drop_down OUTPUT -
I cannot determine how to utilize the voice function while in the fitness mode. On one or two occassions it worked but I do not know how it was activated. It gives a voice summary and new summary screen for the workout.
Hi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
CLASSNAME LIKE BAPIBDS01-CLASSNAME
OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
pa_class like BPIBDS01-CLASSNAME,
pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
EXPORTING
bor_id = bor_id
IMPORTING
logical_sytem = pa_lo_sys.
classname = pa_class.
objkey = pa_objkey.
EXCEPTIONS
no_objects_found = 1
internal_error = 2
internal_gos_error = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
exporting
is_object = i_object1
ip_arl = space
receiving
rt_stat = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl = space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF. -
I am having trouble with my iBooks app. When I tap an authors name in order to browse the available books, nothing happens. this problem has just recently occurred. It doesn't matter if I am looking at paid or free. Any suggestions ?
TheArtificialNerd wrote:
I can say 100% that the AppleCare phone number only redirects to other AppleCare groups.
ALL of them Apple corporate or Apple Authorized partners. -
I have manually deleted and edited duplicates and originals of events and reminders etc many many times but have had no success and i mean hundreds of duplications! Does anyone know what I am doing wrong?
Hi Margaret,
iCal Dupe Deleter sees events with the same start time and title that are also in the same calendar as duplicates. If your events are in different calendars then it will not see them as duplicate.
You do not say how you are syncing to your iPhone, but as it is an Outlook calendar you are syncing I expect it will be via iTunes. If so, this is what I suggest you do.
1. Turn off the Outlook syncing. You'll find the place to do this under Outlook's Preferences > General Preferences > Sync Services.
2. Then sync your iPhone (if it is not via iTunes let me know).
3. Open iCal and if there are any remnants of the Outlook calendars in iCal delete the calendars.
4. Open Outlook and turn on Calendar syncing again.
5. Open iTunes with your iPhone plugged in. Select the iPhone on the left and then select the Info section at the top. Scroll down to the Calendars section and turn on syncing for the calendars. Then scroll down to the Advanced section and check to replace the calendar information on the iPhone next sync.
6. Sync your iPhone.
Let me know how this goes.
I have heard of several people with Outlook syncing duplicates recently.
Best wishes
John M -
ITunes Error- 3 months, would appreciate help
hey guys and gals, i really need help. i've been trying to fix my iTunes software for months now. Without further ado, here's what happened:
installed itunes
deleted quicktime accidently
installed quicktime
installed itunes
itunes still doesn't work
installed and reinstalled multiple times from both the c.d. and itunes.com
Therefore, when i attempt to open my itunes program, the dialoge box stating, "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. Send error report, dont send."
the details of the error report are:
"information regarding the condition of iTunes when the problem occured; the operating system version and computer hardware in use; your digital product id, which could be used to identify your license; and internet protocol(ip) address of your computer.
we do not intentionally collect your files, name, address, email address or any other form of personally identifiable information. however, the error report could contain coustomer- specific information such as data from open files. while this information could potentially be used to determine your idenity, if present, it will not be used. the data that we collected will only be used to fix the problem. if more information is available, we will tell you when you report the problem. this error report will be sent using a secure connection to a database with limited access and will not be used for marketing purposes."
for the love of god, help me. i really wanna get my itunes working.
i really appreciate it
-kevin spankyuhh, okay
these wernt present in my add/remove programs list. but itunes was.
"Uninstall iPod Updater
5) In Add/Remove Programs, select iPod Updater. Click Change/Remove.
6) A Confirm Uninstall window appears. Select OK to remove iPod Updater.
7) Repeat for any and all iPod Updaters.
Uninstall QuickTime
8) In Add/Remove Programs, select QuickTime. Click Change/Remove.
9) The QuickTime Uninstall window appears. Select the Uninstall Everything.
10) The Uninstall Successful window appears. Select OK.
11) Close all windows, restart the computer."
also,
12) Open My Computer. Open your hard drive. Open Program Files.
13) Delete iPod, iTunes and QuickTime folders if present.
it wont let me delete quicktime folder, but i deleted ipod and itunes folder with ease. and with that,i deleted quicktime AND itunes in "apple computer folder" i did this entire process several times, and the same message popped up. however, i think it's those missing componets that's screwing my itunes up. it gets really fustrating after awhile.
thanks,
kevin spanky -
Need help with IE6 box drop problem DW CS4
Having a problem with this page: http://www.recoverings.com/tarzan.html in IE6. Maincontent drops below the sidebar menu. Looks fine in FF, Safari, IE7.
All other pages work well. I assume that this has something to do with the width of the .wrapnail and .thumbnail divs, but reducing the margins doesn't seem to help and the images start to get too close together. What am I missing here?
Can someone help me solve this?
I would also appreciate any suggestions on cleaning up my CSS. Seems like I have an awful lot of stuff in there. Maybe it's okay but could it be cleaner?
Thanks for your help,
PhilIE bug Float Drop is fairly common. Make sure your page wrapper division is wider than the combined width of left sidebar + main content + left & right borders if any. If that doesn't help, add an overflow: hidden rule to your floated container and make sure you have cleared both floats.
More about float drop and the expanding box problem can be found here:
http://www.positioniseverything.net/explorer/expandingboxbug.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
Maybe you are looking for
-
Adobe creative cloud sign in trouble windows 8
hi i have a slight problem with creative cloud everytime i sing in it signs me out and tells me i need to sign in again but when i do the same thing happens i am running windows 8 i need help beacuse i have not been able to sign in once?
-
How to save Checkbox inputs as a Variants in WD ABAP
Hi, I am going through this nice blog [http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID0832150950DB20043138143752756391End?blog=/pub/wlg/10731] which helped me creating varaint options for SELECT -optins fields. Everything works fine
-
Group by and over partition.
Hi to everybody.... i ahev a table like this: id name salary 1 John 1000 2 Tom 1300 3 Alan 1400 4 Mark 1800 and i do a query like this: select max(salary) from table and i have 1800 What i would like to have, is a query that return me the id, the nam
-
I have an application that uses dynamic taskflows. In one task flow, taskflowA, an enduser can create new roles for users. In another task flow, taskflowB, the enduser can assign roles to users. The roles that can be assigned to users are provided us
-
Cant set password on BEFW11S4, or WPA, help!
hi, i have all macs, and im trying to set up security on my BEFW11S4 wireless router.. im pretty handy, but im not a network expert. it seems the menus im given in the web-based admin utility do not give me the options to set WPA or a username/passwo