NI-VISA as default driver for USB device with another manufacturer's driver?
Hi Labview Developers or AE,
I have read the tutorial, "USB Control Tutorial Device" at link.
I read a paragraph "If you do not know the USB vendor ID and product ID, to get them, plug
the device into the computer and allow the computer to recognize the
new device. Cancel out of the Found New Hardware Wizard if it starts.
Open the Device Manager from the Control Panel and find your device on
the list, usually under "Other Devices". It may show a yellow
exclamation mark indicating it is an unknown device. Double click the
device to open the properties. Select the Details tab and ensure that
"Device Instance Id" shows in the attribute dropdown box. A string of
characters will be displayed similar to Figure 3. The four characters
to the right of "VID_" and "PID_" are your vendor ID and product ID,
respectively. Write down the characters for your device, close the
Device Manager, and unplug the device from the computer. Alternatively,
you can contact your device vendor to obtain this information."
I am wondering if it is okay to install two drivers together and do labview with two of them simultaneously. I am using Advantech USB-4716. I installed Advantech driver so that I can use Advantech-labview functions to control and measure. unfortunately, , there's no advantech function like reset.vi in case of problem reading. So I wondering if it is okay to use NI-VISA driver by wizard as mentioned above and advantech-Labview functions together. I have not figured out how to reset Advantech USB-4716.
Pls advise. Thanks
Clement
Hi Nicholas,
I found the drivers in those links.
First of all the customer must install our Device manager ( DAQ Tool ) and Driver
http://support.advantech.com.tw/support/DownloadSRDetail.aspx?SR_ID=1-246K8V
That's he needs to do always before using our devices.
For LabVIEW he also needs to install in addition the LabVIEW driver
http://support.advantech.com.tw/support/DownloadSRDetail.aspx?SR_ID=1-29WTFD
It is the LabVIEW or LabVIEW DAQ , it depends on customer LabVIEW software that he is using
After installation he will get in LabVIEW ready made VI ( examples ) to use from Advantech and also the Manual
Similar Messages
-
Need Chipset Driver for USB support
Hi.
This Windows XP-SP3 PC has 4xUSB2 or 2xUSB3 on-board ports, and all have failed. All USB devices are yellow-flagged in device manager.
I have run SFC \SCANNOW and it runs to completion, and I have tried right-clicking on a yellow-flagged USB entry in Device Manager and selecting Update Driver, but that only results in the following dialog:
Cannot Install This Hardware
There was a problem installing this hardware:
Universal Serial Bus (USB) Controller
An error occurred during the installation of the device:
The driver installation file for this device is missing a necessary entry. This may be because the INF file was written for Windows 95 or later. Contact your hardware vendor stop
It has been suggested to me that I should try to obtain the Chipset Driver for USB support. Running Speccy reveals the following about the mainboard:
Manufacturer MICRO-STAR INTERNATIONAL CO.,LTD
Model MS-7267 (CPU 1)
Version 3.0
Chipset Vendor Intel
Chipset Model i945P/PL/G/GZ
Chipset Revision A2
Southbridge Vendor Intel
Southbridge Model 82801GB (ICH7/R)
Southbridge Revision A1
BIOS
Brand American Megatrends Inc.
Version V7.1
Date 9/02/2007
Can you help me out with this?
Thanks very much.
- Rosiehere you can find all drivers for your mobo:
http://www.msi.com/support/mb/945GCM5F_V2_FSB_1333.html#down-driver&XP 32 -
Windows 7 x64 only installs the drivers for USB devices that are plugged in upon system startup
Hi all,
I have a most unusual problem. On my personal desktop, I can only use USB devices that are plugged in upon system startup. If I unplug a USB device and then plug it in again, the driver will not install correctly. I cannot force the device to start and I
can't pick a driver manually. All I get is this. If I plug in a USB device and then reboot, the driver gets installed correctly and I can use it until I unplug it again. I'm pretty sure it's a Windows issue
but I can list the hardware I have if it is needed.
I have tried:
Running an SFC /SCANNOW as administrator
Uninstalling all USB controllers via device manager and letting them reinstall
Neither worked to resolve the issue. If this was a client's computer I would probably just reinstall Windows but because this is my main work PC it'd be a huge hassle to do it, so I'd really appreciate any other ideas anyone has. If I have to reinstall I
will. Thanks!Hi,
Since the issue just happened for 4 monthes, I consider that some changes or updates may cause the issue.
Please also try to restore the system back to the point before this issue.
You can also try these steps:
1.Power down your laptop or desktop
2.Physically unplug the computer. If it’s a laptop, remove the battery too.
3.Leave it disconnected for three minutes
4.Replug the desktop or reinsert the battery
5.Power on the system
For the reasons, you can refer to this article:
How to fix “USB device not recognized”
http://www.fixedbyvonnie.com/2013/10/how-to-fix-usb-device-not-recognized/#.UvtCLf7xvwo
Kate Li
TechNet Community Support -
MP navigator ex the scanner driver for this device is not supported for my itunes/ ipod
Mp navigator ex driver for this device not supported when I plug in my ipod I have windows vista
Hello there K_McCreedy,
I saw your post about the scanning issues you have been having with your PS B110a and Mavericks. I have looked into this for you and I would like to offer some suggestions.
First of all, there is no downloadable full feature driver and software (scanning software included) for this model of printer and Mavericks. There are some work around options however, that I will link you to below!
Please follow these steps:
1. Mac OS X: How to reset the printing system
2. Repair disk permissions
3. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
(See under link #3 for the different methods of scanning options with Mavericks under the FAQ's section)
I hope I helped answer your question!
Thanks for posting in the community and have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Ihave pavilion g6 2006tx with win 8.1 pro ineed driver for unknown device
driver for unknown device
This question was solved.
View Solution.Hi:
You may need to reinstall the graphics driver, but I think it is the same one you have now. It is from 2012 and so all they did was say it was good for W8.1 too.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113258-1&cc=us&dlc=en&lc=en...
If that doesn't work, then unfortunately I don't know what the issue could be. -
When I go to sync, this window pops up: "The default service for your device's 'Calendar' has changed since the last time you synchronized. Click OK to use your new default service and combine your data, which might duplicate some entries. Click Cancel to stop...."
I haven't changed a thing. What's going on? I don't want to get duplicate entries.Yes, I sync with Outlook. From what I understand, your default service should be your e-mail address for both mail & calendar.Spell Check
-
Driver for USB SB live! 24 bit exter
I left my CD at home in Hong Kong and now I'm in the USA, so would any body tell me where could I get the driver for USB SB li've! 24 bit external?
Thank you very much, I'm really sad as I just bought something new and can't use it.jkiang,
The driver is not available for download at the moment. You could check with Direct Sales Department if they have the CD for order. Their phone number is -800-998-000 and it is option #. They are open from 9:00AM to 6:00PM (CST) Monday to Friday.
Jason -
When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."
Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support -
About: control USB device with Java
Any body know how to control USB device with Java?
Does JDK provide a package for USB?
Is there any web site concerning USB programming?
Thank you! ^_^Look at www.prosyst.com. There is an usb bundle (linux
and windows pltforms).I looked on this site and cannot find the bundle you are talking about. Do you know more specifically where to find out about controlling USB devices with Java? -
Microsoft LifeCam VX-7000 driver for MacBook Pro with retina display
Microsoft LifeCam VX-7000 driver for MacBook Pro with retina display
I see a mention of Google Chrome and VirtualBox in your log. Stop using those and see if the situation changes? From what we know so far, the problem is a software one (Apple's fault), not a hardware problem. Mountain Lion is supposed to fix the issue, which should be out in about a week. So you could wait til then, upgrade to ML, and see if its still crashing or not.
-
I have FIFA 13 installed on another apple device with another Apple ID. How do I install FIFA on my current device, which has a different apple ID.
Use the Apple ID you used on the other Device on your current Device.
-
Equium - Windows can't load the device driver for USB dongle
I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
what does this mean and how can i fix it?hi it's a vodafone 3gb cheap as chips dongle
it's an equium a200 i think
everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
i know i sound completely stupid, but when it comes to technology i am! -
Udev not loading the right driver for usbtmc device
I have a usb beam profiler and I'm trying to get it to work on arch linux. It works using NI-VISA, so I should be able to communicate with it using usbtmc. However, when I plug it in, it does not show up in /dev.
I think the problem is that udev is not loading the tmc interface driver when I plug it in.
Here's a snippet of the output from lsusb -v:
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
I believe that bInterface* should look something like:
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 3 Test and Measurement
bInterfaceProtocol 1 TMC
iInterface 5 TMC488
Is there a way to force udev to load the right interface? Or is the problem that I'm missing something from my kernel?Could you post the entire output of lsusb -v for the device?
Bus 001 Device 013: ID 1313:8019 ThorLabs
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1313 ThorLabs
idProduct 0x8019
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
What device node name are you expecting?
Not sure, but probably /dev/usbtmc0
Is there a chance that it is being instantiated as a HID device? Does /dev/usbhid0 appear?
Nope, don't have a /dev/usbhid0
What does the journal say when the device has been attached?
I'm not sure what you mean, but dmesg says:
[ 6095.219400] usb 1-1.2: new high-speed USB device number 14 using ehci-pci
and udevadm monitor says:
KERNEL[6098.321484] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[6098.321887] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV [6098.324333] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV [6098.325356] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb) -
Hi everyone,
I'm new on Labview and I want to acquire data from a usb 1608G from Measurement Computing. I can acquire data thanks to the ULx for NI Labview Library included in the usb 1608 G but I would like to use the Measurement & Automation Explorer...
Unfortunately, it does'nt recognize the usb port... Is it because the usb 1608G is not a NI instrument? Is it because I don't have the correct driver?
Thanks for your answers,
Morgane CHARBONNEAU.Hello,
If you have LabVIEW drivers for your usb device, why you want to use MAX for this?
If you want to communicate using MAX, your device should fall in either USBTMC Class or RAW Class. Starting with version 3.0, NI-VISA supports USB communication for two classes of VISA resources USB INSTR (Test and Measurement Class) and USB RAW (class).
More information will be available in http://www.ni.com/white-paper/4478/en/
Regards,
Naresh
India LabVIEW Developer League member -
Seagate drive quandary: "USB device is drawing too much power"?
I have a year-old Seagate external hard drive that when I plug in to a 2011 MacBook Air, it started saying something to the effect of "your USB device is drawing too much power and had been disable in order to aboud damage..." I had been using this drive for some time, and this just started a few days ago. I tried plugging it into a USB hub and directly into a USB on the MBA with the same result. So I plugged in into my brand new 2012 MacMini and got the same messgae. My initial conclusion: the drive is dead.
So I buy a new USB 3.0 Seagate compact external drive, plug it in and get the same error on my MBA and on the MacMini. If that isn't odd enough, I have the exact same Seagate model plugged into my MacMini as the backup drive with no problems. Any ideas?? Maybe I received a DOA drive by coincidence?
UPDATE: Tried the new drive on a Win7 PC and it recognized it fine. Why would my 2011 MBA and 2012 MacMini not recognize the new drive?MIght be something to help you here > USB Device Drawing Too Much Power
Maybe you are looking for
-
Issues with Using Data Dashboard and Using Web Service
After running a system for many months it has suddenly decided to not work at all. I am using Data Dashboard to read variables on a host. I'll outline the system here to get a baseline: I'm running LV 2012 SP1 f5. I collect data from one Ethernet
-
Multiple address for the same customer code
Hi, Suppose we have a customer name XYZ LTD whose sap code is 123. Now user want to maintain multiple addresses for the same customer in the same code.So that during billing he can have option to chose one of the address in which he want to sent the
-
Photoshop Elements 10 now crashing on both of my computers. Why?
It was working perfectly for almost a year and suddenly it began crashing. it's not a hardware problem, I had that checked first at the Apple Store. There's enough memory and I've removed many photos from the iPhoto file in case that was the problem
-
Changing the page region contents
hi I have a page with 4/5 regions. On the top most region our company banner (which is a .gif) is there. There are some other links added in different region of the page. i want to change my company banner whenever i click on the links in the differe
-
HT5114 Is it possible to have a student account for a child under 13?
Do you have to be 13 a student itunes account?