NiBuf3Listen failed for host
Hello all,
can you pls suggest me smth for this:
[Thr 139692102760192] *** ERROR => IcmBindService: NiBuf3Listen failed for host host(ip):port (rc=-16): NIEMYHOST_VERIFY [icxxserv_mt. 2777]
[Thr 139692102760192] *** WARNING => Could not reactivate service (rc=-1) HOST=host,PORT=port,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=600 [icxxserv_mt. 1563]
[Thr 139692102760192] *** ERROR => ICP_icm_mod_service: ModService(7) failed for port, HTTP(rc=-1) [icrxxadmin_m 5526]
I want to activate services in web dispatcher for java systems.
Thx
Chris
Hi Chris ,
If the port used is less than 1024 then make sure that you have set the correct permissions as in the following note
2117815 - ICM / Web Dispatcher: icmbnd using sudo - port restrictions for icmbnd
2089881 - ICMBND NiIBindSocket failed (13: Permission denied)
Thanks ,
Manu
Similar Messages
-
Trusted Host Check Failed for RFC SAPLSOVLROOM
Hi,
We are using SAP Enterprise Learning 7.5.
In RFC SAPLSOVLROOM, got a below error in response body.
Trusted host check : failed
The host that you are calling from is not configured as trusted. See
the configuration guide for information about how configure a host as
trusted.
Added hostname in the trusted hosts of the sap_servlet_config.xml.
Also followed Note 1471989 - SAP Enterprise Learning 7.5 - Trusted host check:failed
Still the trusted host check alone getting failed. Other Checks for the RFC is sucessful.
Regards,
Raja. GRaja, did you figure out what was going on here? We have similar situation. Hosta are listed in trusted hosts section, but we get error when doing connection check in sm59 if we use a https connection, but not if we use http connection. There are no ssl errors anywhere, but it fails the same as yours.
If you have any update. Please reply. -
Hi, First of all I would like to tell you that the application was running fine few days back, this issue has come suddenly.
I am getting following error while doing connection test for AD with SUN IDM:
Test connection failed for resource(s): AD: ==> No route to host\n
and when I try to open the detail for windows active directory arrow mark from the resource tab, Its giving me below error:
Error iterating over objects ==> com.waveset.util.WavesetException: ==>java.net.NoRouteToHostException: No route to host
I tried to google on this but all are pointing to some network/firewall problem.
Can anybody suggest me the correction ways to resolve this problem. Any idea how I can proceed further.
Thanks,
JimmyFirst of all, I dont know if you even done the proper fault elimination
No route to host is indicative of a network problem that could be based on several different faults.
Simplest way to check, log in to the system running your IdM.
first check if your nameservice is working
nslookup <your fully qualified hostname for the AD gateway>
idmmgr@unix103a:$ nslookup idm-gw.company.com
Server: 139.188.2.1
Address: 139.188.2.1#53
idm-gw.company.com canonical name = win050a.company.com.
Name: win050a.company.com
Address: 171.39.88.145if you get the right response there
try pinging the returned address
idmmgr@unix103a:$ ping 171.39.88.145
171.39.88.145 is aliveIf you have a routing problem it will probably show above...
if the route to the gateway works, it might be the gateway that cant talk to the AD
Just follow the track manually and if it stops working from one point, go past that point (if you can) and see if it works beyond it.
Either way, whatever resource is pointed out in the connectinfo in the pertinent adaptor or connector should work from the prompt of the system running it, if not, then you can start unraveling it from there. -
Portmap translation creation failed for udp src inside dst inside
Hi!
I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
My asa is a main router with addres 192.168.1.1
UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
Firewall and NAT on UC500 is disable
UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
the log says
3
Sep 07 2013
00:21:49
DC
53
PBXCUE
32901
portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
I tried exempting uc500 subnets on ASA but that didn;t work.
Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
Please help! I am not familiar with CLI.
I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
I would be grateful for ideas.
Lukasz
global (inside) 1 interface
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface https IIS https netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface www IIS www netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255 dns
static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255 dns
static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255 dns
static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255 dns
static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255 dns
static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x
route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicyHello Julio!
Thank you for your advice.
I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
Now I can see everything from all of my inside networks.
I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
I am only an enthusiast but my recent successes have given me apetite for more...
I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit tcp any interface outside eq 8080
access-list outside_access_in extended permit tcp any interface outside eq 23456
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
access-list outside_access_in extended permit tcp any interface outside eq 13000
access-list outside_access_in extended permit tcp any interface outside range 8001 8016
access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
access-list inside_access_in extended permit ip host IIS any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip host RBSTORE_NAS any
access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
access-list inside_access_in extended permit tcp any any eq 5432
access-list inside_access_in extended permit tcp any host PBXCUE eq www
access-list inside_access_in extended permit tcp host PBXCUE any eq www
access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
route print shows:
and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
How do I change it?
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.126 4250
0.0.0.0 0.0.0.0 On-link 192.168.1.240 21
80.51.24.22 255.255.255.255 192.168.2.1 192.168.2.126 4251
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
169.254.0.0 255.255.0.0 On-link 192.168.2.126 4506
169.254.104.126 255.255.255.255 On-link 192.168.2.126 4506
169.254.255.255 255.255.255.255 On-link 192.168.2.126 4506
192.168.1.240 255.255.255.255 On-link 192.168.1.240 276
192.168.2.0 255.255.255.0 On-link 192.168.2.126 4506
192.168.2.126 255.255.255.255 On-link 192.168.2.126 4506
192.168.2.255 255.255.255.255 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 192.168.1.240 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 192.168.2.126 4506
255.255.255.255 255.255.255.255 On-link 192.168.1.240 276
===========================================================================
I am starting to feel like I am using a bit too much of your friendliness ...
Best Regards and have a great day!
Lukasz -
VPN problem behind ASA5505 -regular translation creation failed for protocol 50
Dear All,
I have to connect behind my ASA5505 with an VPN klient to an other site.
First time i got this failure.
"Deny protocol 50 src inside:192.168.50.X dst outside:x.x.x.x by access-group "acl_in" [0x0, 0x0]"
Than I opened our inside (src 192.168.50.0) network the UDP 500,4500 TCP 500,4500,10000 and ESP (dest x.x.x.x remote firewall ip).
access-list acl_in extended permit esp host 192.168.50.0 host x.x.x.x eq isakmp
access-list acl_in extended permit udp host 192.168.50.0 host x.x.x.x eq 500
access-list acl_in extended permit eudp host 192.168.50.0 host x.x.x.x eq 4500
etc.
After that i could connect for the remote firewall with vpn client but i couldn't reach any PC1s on there side and ping gives back no anwser.
Deny protocol 50 was solved but i got an other problem:
"regular translation creation failed for protocol 50 src inside:192.168.50.X dst outside:x.x.x.x"
I found somewhere thet lines can help:
crypto isakmp nat-traversal
inspect ipsec-pass-thru
But this wasn't usefull.
I tried a many thing but i'm stuck.
Could somebody help me what can i do to solve this problem?
Thanks for all anwsers!The solution was the following for one IP!
object network x.x.x.x (inside IP)
host x.x.x.x (inside IP)
nat (inside,outside) static y.y.y.y (remote IP) -
Hello Community
Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully.
I was able to understand Event Viewer logs, there was supposed to be 4 possibilities
one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
the error still occurred.
Then I used a Powershell command that displayed output but the Output doesn't make sense
because it is saying the login failed associated with the database that was created by the Search
Service application when it was created.
But how can that username be related to the Search Service database? Below is the output:
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Site=/
Area : SharePoint Server
Category : Database
Level : High
EventID : 880i
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlCli
ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlCli
ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser
.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
opyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
in(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) a
t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
onString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient
.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sy
stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
derInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionF
actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
ons) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.
Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderB
ase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFa
ctory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCo
nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.S
qlConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
Area : SharePoint Server
Category : Database
Level : High
EventID : 880k
Message : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
eryData monitoringData, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
er(SqlCommand command, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.Schema
Database.GetSchemaHighLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
Time() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Admin
istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) a
t Microsoft.Office.Server.UserProfiles.Co...
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
e login failed.' Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
eNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Login failed for user Server1\User1.' Source: '.Net SqlClient Data Provider' Number: 18456
State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : tzku
Message : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15' ConnectionState: Closed ConnectionTimeout
: 15
Area : SharePoint Foundation
Category : Runtime
Level : Unexpected
EventID : tkau
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlClie
nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClie
nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.
Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
pyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
n(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
nString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.
SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sys
tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
erInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFa
ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
ns) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.D
ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBa
se.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFac
tory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCon
nection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.Sq
lConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection() at Microsoft.Office.S
erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
a, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
hLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime() at Microso
ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
nID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Administration.UserProfile
ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) at Microsoft.Office.Se
rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName) at Microsoft.Office.Server
.UserProfiles.CoreProperty.get_ManagedPropertyName() at Microsoft.SharePoint.Portal.WebControls.ProfileP
ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch) at Microsoft.SharePoint.Porta
l.WebControls.ProfileUI.LoadProfileTable() at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
rol(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.
Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control
.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.U
I.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
, Boolean includeStagesAfterAsyncPoint)
Area : SharePoint Foundation
Category : Monitoring
Level : Medium
EventID : b4ly
Message : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
What does that username have to do with the database created by Search Service Application creation
and why can't I "Edit my profile" in My Profile?
Thank you
ShabeautUse Netmon to analyze the traffic and understand more on same
Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
or mysite
http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
add the SQL Server details into the hosts file on the WFE server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
If this helped you resolve your issue, please mark it Answered -
Sql Server 2012 Login Failed for user "NT Authority\System"
I have installed SQL Server on a new server. I have been getting the following error on each of the database in it.
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'ABC'. [CLIENT: xxx.xxx.xxx.xxx]
Here is some information on the instance:
1) Default instance
2) SQL Server, Sql Server Agent, Sql Server Reporting services are running / log on using a domain service account.
3) Sql Server Browser is disabled.
4) SQL Server VSS Writer is running / log on as Local Service.
5) NT AUTHORITY\SYSTEM does exists in Login with just public server roles.
I ran a trace on login failed and I get:
ApplicationName: Microsoft Windows Script Host
and it runs every 15 minutes.
Help please?Hi,
The error was thrown when the SCOM components connected to the backend SCOM databases.
You can specify a domain account, grant it the sysadmin role and the error should be gone.
Also, see the replies in your previous thread:
http://social.technet.microsoft.com/Forums/en-US/23f6b6cb-ec41-4117-8613-26d24c948827/login-failed-for-user-username-reason-failed-to-open-the-explicitly-specified-database
Thanks.
Tracy Cai
TechNet Community Support -
Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
and Server, except the host name.
connectionString
="Data
Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
of 3 databases. NTA\NS is not listed as a login specific to my target dB.
My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
add
name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
etc.
Thanks for your time and patience on this Deployment 101 type issue.
Kurthi,
You receive either of these error messages specifically when you use integrated security.
To resolve you can use one of below.
Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
Thanx, Mark as answered if you are ok .. -
Login failed for user 'NT AUTHORITY\ANONYMOUS
Hi All
I have already gone thru lot of links, So appreciate if i can have some solution
I have 3 servers A, B and C . A and B are in same domain and C is in different domain. and I am sysadmin in all 3 servers and all have trusted connection with each other
1. All have tcp and named pipe enable
2. All 3 servers and all services including browser are up and running
3. When i connect any sql server from any Server using SSMS i am able to connect and (net_transport, auth_scheme = TCP , NTLM).
Now i create linked server at server B to Server C (C domain is different than A and B). When i login on Server B and try to run query on C its working fine. But after remote login to server A and connect sql server at B using SSMS when
i expand linked server to c i cant see databases and query is giving error "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'"
I also tried to connect to all 3 server in ssms using forced named pipes but i am getting below error
"provider named pipes provider error 40 - Could not open connection to sql server"
My question :
1. I have to use domain account to use linked server from server A to connect SQLserver B to server C, How this can be done is this related to Double hop ??
2. Why i cant connect using forced Named pipe to any server using SSMS except local host
Thanks Saurabh Sinha http://saurabhsinhainblogs.blogspot.in/ Please click the Mark as answer button and vote as helpful if this reply solves your problemHello,
First, it is possible to use Kerberos delegation across trusted domains.
net_transport, auth_scheme = TCP , NTLM
This means something isn't correctly setup as you're defaulting back to NTLM. This should read Kerberos if your SPNs were setup correctly and authenticated properly. Check the SPNs and service accounts.
http://technet.microsoft.com/en-us/library/cc280744(v=SQL.105).aspx
1. I have to use domain account to use linked server from server A to connect SQLserver B to server C, How this can be done is this related to Double hop ??
To go across domains I'm not entirely sure on that part, but I can say it'd probably be easier if you did use a domain account as the service account.
2. Why i cant connect using forced Named pipe to any server using SSMS except local host
I'm not quite sure what you mean here. You can't connect through NP? Why the need for NP at all?
Sean Gallardy | Blog |
Twitter -
Error while invoking member: ManagedInit1 - Login failed for user 'SRCAdmin
I am trying to setup a Test Server for BOP 11.60 with MS SQL 2000 in MS Windows Server 2003. After installation, I copied user directory and database from live system to the new Test server. After installed the application andI updated Configuration Manager but when I run Planning Application Services, I have the following message:
System.Exception: Error while invoking member: ManagedInit1 - Login failed for user 'SRCAdmin'. ---> System.Runtime.InteropServices.COMException (0x80131904): Login failed for user 'SRCAdmin'.
--- End of inner exception stack trace ---
at SRC.Core.Common.LateBoundHelper.InvokeMethodDirect(String methodName, BindingFlags flags, Object[] args)
at SRC.Core.Common.LateBoundHelper.InvokeMethod(String methodName, Object[] args)
at SRC.Core.Host.HostProcess.StartUp()
I can use SRCAdmin user login to SQL Database without any problem but use Adminbop to start the Planning Application Services, I had this message.
Does anyone know what is the problem?
Regards,
IrenePlease, review your FBA configuration https://sharepoint2013fba.codeplex.com/
-
BI Server Fails for No Apparent Reason
Hi,
I have a problem I cannot explain in that our BI Server continually fails for no apparent reason.
We have OBIEE+ installed on Windows Server 2003 together with Oracle 10g. The OTM Advanced Analytics repository &.catalog has been installed with the OTM (Full HDOWNER /limited GLOGOWNER) database under pinning it (without a full OTM installation) because there is a need for an FTI environment for users to 'play' with but infratructure limitations prevent a full-blown OTM installation. The setup is unorthodox but the environment does work except for this issue.
The BI Server fails on a regular basis. I cannot find any reports in the NQSServer Log (or any other log I can think of) that points to the cause or indeed that it has actually gone down - the only clue that it has failed is the startup entry resulting from the restart of the service.
To minimise impact I have written a cmd file task that is invoked whenever the BI Server goes down - this shuts down the Presentation Server and Java Host services and then starts all the tasks in the required sequence. The resultant log from this task shows that the BI server goes down every 30 minutes. Obviously something is triggered every half-hour. So I have trawled through the various config files for a clue of what this could be but I can't find anything obvious.
In the repository Administrator, I have suspended all initiallisation blocks of repository variables except for those that are required and the refresh of those remaining is limited to 0600hrs daily so these should not contribute to this issue.
I would be grateful for any suggestions.Hi John,
We are running the environment on a VM server with Windows Server 2003 installed with 2GB ram and 50GB disk space. Beyond that, I'm not sure what memory measurement your asking for. Currently the server is running at 1.39 GB memory usage with NQSSever currently using 50MB of that. So it still has 0.6GB of memory it can call on if needed. When I open up a dashboard from a remote workstation, the memory usage inceases to about 55MB.
I have already gone through the NQSConfig.ini file and increased space allocations, for example MAX_CACHE_ENTRY_SIZE = 10 MB (Increased from 1MB) but these changes had no effect.
Exactly which memory measurement are you after?
Thanks in advance. -
ERROR: Ldap Authentication failed for dap during installation of iAS 6.0 SP3
I am attempting to install ias Enterprise Edition (6.0 SP3) on solaris 2.8 using typical in basesetup. I am trying to install new Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url ldap://hostname:389/o=NetScape Root user id admin (151: Unknown Error)
Fatal Slapd did not add Directory server information to config Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to restart
LDAP. When finished, press ENTER to continue, or S to skip this step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at javax.naming.NameNotFoundException.<init>(NameNotFoundException.java: 48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I got the following error;
"Cant connect ot the admin server. The url is not correct or the server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login. make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
MadhaviHi,
Make sure that the directory server is installed first. If it is running
ok, then you can try adding an admin user, please check the following
technote.
http://knowledgebase.iplanet.com/ikb/kb/articles/4106.html
regards
Swami
madhavi korupolu wrote:
I am attempting to install ias Enterprise Edition (6.0 SP3) on
solaris 2.8 using typical in basesetup. I am trying to install new
Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url
ldap://hostname:389/o=NetScape Root user id admin (151: Unknown
Error)
Fatal Slapd did not add Directory server information to config
Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to
restart
LDAP. When finished, press ENTER to continue, or S to skip this
step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at
javax.naming.NameNotFoundException.<init>(NameNotFoundException.java:
48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown
Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I
got the following error;
"Cant connect ot the admin server. The url is not correct or the
server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login.
make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
Hi All,
I am in the process of installing EP7 on SLES9 and MaxDB 7.6 on a clustered HA environment where the SCS, DB and JC components are installed under and referenced by their virtual hostname (eg. sapinst SAPINST_USE_HOSTNAME <virt name>).
The SCS instance is installed, the Database Instance is installed and I'm currently in the process of Installing the JC and Deploying the EP packages.
During the installation, SDM is put into standalone mode and sapinst tries to deploy the package EPBC06_0.SCA where it fails and the sdm_server.err shows :
"com.sap.sdm.serverext.servertype.inqmy.TargetEngineConfigurationException: Cannot retrieve Engine logon data from Secure Store: Entry for host name is missing or empty (Secure Store key: admin/host/). at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getLoginDataFromSecStoreInQMyTargetSystemConfigurator.java:286) at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getEngineLoginDataInQMyTargetSystemConfigurator.java:197) at com.sap.sdm.serverext.servertype.inqmy.EngineStateServiceImpl.determineCurrentEngineStateEngineStateServiceImpl.java:53) at com.sap.sdm.app.proc.deployment.states.State.determineJ2EEEngineState(State.java:97) at com.sap.sdm.app.proc.deployment.states.StateBeforeFirstDeployment.getJ2EEEngineStateChangeDescriptionStateBeforeFirstDeployment.java:75) at com.sap.sdm.app.view.proc.deployment.mapper.StateMapper.map(StateMapper.java:56) at com.sap.sdm.app.view.proc.deployment.mapper.FlowMapper.map(FlowMapper.java:28) at com.sap.sdm.app.view.session.AppViewUpdater.updateAppView(AppViewUpdater.java:22) at com.sap.sdm.app.view.session.AppViewUpdater.sessionStateChanged(AppViewUpdater.java:18) at com.sap.sdm.app.proc.deployment.impl.SessionStateObserversImpl.notifySessionStateChangedSessionStateObserversImpl.java:46) at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:85) at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59) at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264) at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108) at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.processGuiAdminRoleCmdProcessor.java:72) at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67) at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommandCmdServer.java:76) at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286) at com.sap.sdm.is.cs.ncserver.NetCommServer.serveNetCommServer.java:43) at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serveServiceWrapper.java:39) at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50) at java.lang.Thread.run(Thread.java:816)"
The same problem occurs if I try to deploy this package or any other package using SDM in standalone or integrated mode.
configtool -> Secure Store -> admin/host/<SID> is the virtual hostname of the JC instance.
I've tried the following to no avail:
- Changed configtool -> Secure Store -> admin/host/<SID> to be the physical hostname of the box.
- Changed configtool -> Server -> Dispatcher -> Service -> P4 -> bindhost (from 0.0.0.0 to JC virt IP).
- Changed the <Host> entry in sdmrepository.sdc from <phys hostname> to <jc virt hostname>.
The SAPLOCALHOST, SAPGLOBALHOST all seem to be set correctly in the SAP profiles.
Has anyone had this issue? If so, what do I need to check/change? Any ideas?
Notice the message does not reference the <SID> in "admin/host", could this be related to the issue? If so, what can cause this?
TIA
AnthonyHi All,
Just an update, I was able to get around my problems by patching the 2004s media from sp6 to sp8, uninstalling my scs, and database and re-installing from the patched media. -
Lookup of alternativeServiceIdentifier via CPA-cache failed for channel
Hi,
In RFC(ECC) to File(PI) scenaio i am facing the following error in sender CC:
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: lookup of alternativeServiceIdentifier via CPA-cache failed for channel SND_RFC
-CC' (f455868123qq3bba4c3dc3dbf93ed1b, party '', schema 'TechnicalSystem', identifier 'ECC#110')
I have done the following for RFC to File scenario:
ECC side:
1. Created a RFC and tagged it to BAPI
2. In the ABAP program, i am calling the RFC like below:
CALL FUNCTION 'Z_HR_OUTBOUND_DATA2'
IN BACKGROUND TASK DESTINATION 'Z_HR_OUTBOUND_DATA2'
EXPORTING
INTERFACE =
IMPORTING
FILENAME = FILENAME
RETURN = RETURN
TABLES
ITAB10 = ITAB10
P_STATUS = P_STATUS
COMMIT WORK.
3. Created a RFC destination using SM59
RFC detination : Z_HR_OUTBOUND_DATA2
Connection type : TCP/IP
Enabled Registered Server Program
Program ID : ECCTOPI_OUTBOUND
Gateway host : ECC's host number
Gateway service : ECC's service number.
In PI side:
I have created :
1 DT for File Rcvr
1 MT for File Rcvr
1 SI for File Rcvr (async)
1 MM (sender RFC and receiver File)
1 OM
1 CC with RFc as sender with the following parameters:
Communication component : ECC's component
application server (gateway) : ecc's gateway
application server service(Gateway) : ecc's service number
Program id : ECCTOPI_OUTBOUND
inital connections 1
max. connections 1
And also gave ecc's details in application server , s/y number, auth. mode, logon user ,
pwd, ecc's client number
1 CC with File adapter and file content conversion
1 receiver determination
1 interface determination
1 sender agreement
1 receiver agreement
When i am executing the ABAP program in R/3 I am getting the following error:
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: lookup of alternativeServiceIdentifier via CPA-cache failed for channel SND_RFC
-CC' (f455868123qq3bba4c3dc3dbf93ed1b, party '', schema 'TechnicalSystem', identifier 'ECC#110')
Please let me know if any of my steps are wrong and how to rectify this error and make
the scenario working.
Thanks for your help.I have mentioned the Adapter specific parameters properly.
It contains :
For ECC s/y(i.e for RFC)
Logical system : DECCLNT120
R/3 system ID : DEC
Client 120
For PI (i.e for File)
Logical system : DPICLNT100
R/3 system ID : DPI
Client 100
Since i am sending the Response of the RFc to the file, i have used a Service interface where i am passing the RFC.Response as Request.
if i am passing the RFC directly as i/p in Source operation of Operation mapping then it doesn't pick up the response in the souce message of the mapping program present in Operation mapping.
So i am passing the same SI_Sender_RFC in the Sender Agreement and it gives the error:
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '', fromService 'DEC_RFC', toParty '', toService '', interface 'Z_HR_OUTBOUND_DATA2', NS 'urn:sap-com:document:sap:rfc:functions' for channel 'CC_LOTUSNOTES_OUTBOUND_SND_RFC' (channelId c78f5a88787131a09384c07c2db0e93b)
why is it so? -
Web Service execution failed for operation: ReadLogFile
Hello,
im getting the following error message in almost all of my Diagnostic Agent log files:
[MAIJobObserver] ERROR occurred for metric collection
00000000000000000019[com.sap.smd.mai.model.collector.SAPControlWSCollector].
[EXCEPTION]
com.sap.smd.mai.model.collector.CollectorException:
[SAPControlWSCollector.collect] Web Service execution failed for operation:
ReadLogFile. Collector : [SAPControlWSCollector]
Id: 00000000000000000019,
SID: EPX, instance number:00
at
com.sap.smd.mai.model.collector.SAPControlWSCollector.collect(SAPControlWSCollector.java:200)
at
com.sap.smd.mai.job.MetricJobRunner.run(MetricJobRunner.java:25)
at
com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:46)
at
com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
at
java.lang.Thread.run(Thread.java:722)
Caused by: java.rmi.RemoteException:
Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException:
Invalid Response Code: (401) Unauthorized. The requested URL
was:http://<hostname>:50013/SAPControl.cgi
I checked on SAP note 1563660 - sapcontrol, <sid>adm authorization issues (SUM) and confirmed, that ALL installations of the "sapuxuserchk" program are set with "chown root.sapsys" and "chmod u+s,o-rwx". I restarted the diagnostic Agent aftwards.
I also checked on host_profile an made sure, that the parameter "service/admin_users = daaadm" is set.
Still I get the above error messages, so I am at a loss what else to do...
A lot of thanks for your Support !
Best regards,
ThorstenHi Thorsten,
Please check the user used for registration of Diagnostic agent to Solution Manager has appropriate roles assigned (e.g. user SMD_ADMIN)
Also please update to latest patch of SAP Host agent and then try again.
Hope this helps
Thanks & Regards,
Nisha
Maybe you are looking for
-
Remote Desktop and Mac Server Access
Hi Everyone, I'm looking to find out if the iPad can support remote desktop access to another Mac and if Apple has released "Server Admin" and related tools for monitoring and administration of their Mac Server OSX? Regards, Steve
-
Performance Issue with BPC MS 7.0
We are receiving error: "The underlying connection was closed:Unable to connect to the remote server.", when we optimize the application or full processing the dimension. But, according to the TblLogs file the full optimizations are completing succe
-
IPhoto versions and compatibility
I have iPhoto 9.5.1 on my iMac 10.9.1. I have iPhoto 9.2.3 on a Macbook 10.6.8. I have the iPhoto library from iMac on an EHD. The iPhoto on the Macbook will not open iPhoto with that library. I can open it in IPLM on the MB, but I cannot seem to
-
Change IronPort attachment handling behavior
Is there a way to configure an IronPort 170 to automatically block any e-mail attachment which cannot be successfully scanned? For example, users are able to send password protected zip files though e-mail, and the IronPort's default behavior seems
-
Maximum number of email addresses per user
I have a need to create a single mailbox with a large number of alias email addresses. I cannot find documentation on the maximum number of SMTP addresses that can be associated with a single user. Can someone point me in the right direction. Many th