NID-00121 error
Hi everyone,
I am having a problem with Oracle 11g NID utility.,
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for HPUX: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
I am trying to change the DBNAME by using NID.,but it returns the following error.,
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount exclusive;
ORACLE instance started.
Total System Global Area 797523968 bytes
Fixed Size 2185456 bytes
Variable Size 239077136 bytes
Database Buffers 549453824 bytes
Redo Buffers 6807552 bytes
Database mounted.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
$
$ nid TARGET=SYS/xxxx@test1 DBNAME=test2 SETNAME=YES
DBNEWID: Release 11.2.0.2.0 - Production on Thu Dec 6 11:02:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to database test1 (DBID=2323699265)
NID-00121: Database should not be open
Change of database name failed during validation - database is intact.
DBNEWID - Completed with validation errors.
Anyone please guide me on this issue..,
Regards,
Jai.
NID-00121: Database should not be open
Cause: The database was open. To change the DBID, the database must be mounted exclusively.
Action:Shutdown the database and mount it in exclusive mode.
Similar Messages
-
Hi,
Please help me in this regarding. Am getting the same error when i do clone every time.
I have clone a EBS database using rman backup. Restore got completed and when i try to change the DB name using NID command am getting an error. After that when trying to open the database am getting error and before executing the NID command when i open the database with resetlogs it opened successfully. but after executing NID command when i open below error is found tried very hard but could not able to find the solution. Please help me in this.
Error is : ORA-01103: database name 'TESTDBA' in control file is not 'UAT'
Regards.
R.THi,
Please see:
Troubleshooting RAC RapidClone issues with Oracle Applications R12 (Doc ID 1303962.1)
Section: Configure the Target Primary Oracle Home
HTH!
Thanks &
Best Regards, -
Hi Guys,
I am running Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production on RHEL5.
I restored my database without a problem and now I tried to rename ny database name using NID.
Little did I knew that I did not add a tempfile or create a new temp tablespace after the restore.
Now I got this error when trying to rename the database:
NID-00111: Oracle error reported from target database while executing
begin dbms_backup_restore.nidprocessdf(:fno, :istemp, :skipped, :idchged, :nmchged); end;
ORA-01116: error in opening database file /path/temp01.dbf
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 6236
ORA-06512: at line 1
I read on metalink note ID 1339657.1 that I should copy the file to where NID is trying to find them.
Now should I go to the production environment and copy this files to my dev and try to run revert?
What would be the impact by doing that?
Please help!!!!!!!!!!!user11979518 wrote:
Thanks I dropped the tempfile.
Now I get this error:
NID-00135: There are 1 active threads
Looks like the db had somehow crashed.
Check this: (Blogger's text is not in English, but the sql test case is similar to yours)
http://burzaco.wordpress.com/2010/03/31/nid-00135-there-are-1-active-threads/
Please let me know if this works.
Regards,
Rizwan -
Following :
How to Change the DBID, DBNAME Using NID Utility [ID 863800.1]
I would like to change the name of the DB from PSDWH to DSDWH
The note said:
Make sure that you have DB_OLD specified in the tnsnames.ora and listener is started.
You can aslo check if you able to connect to the database using sqlplus :
$ sqlplus sys/<passowrd>@DB_OLDVerify connection to OLD database:
sqlplus sys/xxxxx@psdwh as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Jan 27 17:28:27 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> I opened the NEW database in MOUNT mode:
SQL> startup mount restrict
ORACLE instance started.
Total System Global Area 2667577344 bytes
Fixed Size 2184656 bytes
Variable Size 654203440 bytes
Database Buffers 1996488704 bytes
Redo Buffers 14700544 bytes
Database mounted.
SQL> Then i run the nid command:
[asgard:oracle@dsdwh /software/oracle/DSDWH10gR2/dbs]$ nid TARGET=SYS/LIN45UX@PSDWH DBNAME=DSDWH
DBNEWID: Release 10.2.0.4.0 - Production on Thu Jan 27 17:24:29 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to database PSDWH (DBID=1620662674)
NID-00121: Database should not be open <<<<<<=============
Change of database name failed during validation - database is intact.
DBNEWID - Completed with validation errors. Any suggestion . As far as i am remember its OK that the TARGET (e.g:PSDWH in my case ) should be up and running ?
ThanksFollowing works with 10.2.0.4 EE on EOL 5.2:
[oracle@lx01 dbs]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Jan 27 19:25:31 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount exclusive;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1267068 bytes
Variable Size 92277380 bytes
Database Buffers 188743680 bytes
Redo Buffers 2924544 bytes
Database mounted.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@lx01 dbs]$ nid target=/ dbname=DB102 setname=y
DBNEWID: Release 10.2.0.4.0 - Production on Thu Jan 27 19:27:02 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to database NDB102 (DBID=915559637)
Connected to server version 10.2.0
Control Files in database:
+DATA/cf1.ctl
+DATA/cf2.ctl
Change database name of database NDB102 to DB102? (Y/[N]) => Y
Proceeding with operation
Changing database name from NDB102 to DB102
Control File +DATA/cf1.ctl - modified
Control File +DATA/cf2.ctl - modified
Datafile +DATA/db102/datafile/system.257.740787623 - wrote new name
Datafile +DATA/db102/datafile/undotbs1.258.740787655 - wrote new name
Datafile +DATA/db102/datafile/sysaux.259.740787681 - wrote new name
Datafile +DATA/db102/datafile/users.256.740787419 - wrote new name
Datafile +DATA/db102/tempfile/temp.265.740788819 - wrote new name
Control File +DATA/cf1.ctl - wrote new name
Control File +DATA/cf2.ctl - wrote new name
Instance shut down
Database name changed to DB102.
Modify parameter file and generate a new password file before restarting.
Succesfully changed database name.
DBNEWID - Completed succesfully.
[oracle@lx01 dbs]$My database is using ASM but that should not matter. My Listener is also stopped.
Try to stop your listener and just use target=/ to connect to instance:
export ORACLE_SID=PSDWH
nid target=/ DBNAME=DSDWH setname=yEdited by: P. Forstmann on 27 janv. 2011 19:42 -
Pixelation problems with Live and Recorded Viewing
I'm having massive pixelation when viewing live HD channels or viewing recorded HD shows. When watching live TV the problem is active when I turn on a 2nd TV. We had tech support out and the trouble shooting did not resolve the problem. They thought it was related to bandwith. I'm not well versed on the technology, and don't feel as if I need to understand why their product is not working as it should. I'm paying for a product that is not functioning. What do I need to do as a consumer to obtain the customer service that is expected from AT&T?
Call and schedule another tech visit...Or download the Hyatt app, login with your att email account/password, run the troubleshoot test. This runs 5 tests, any problems found with these will help create a service ticket, if receive a green check mark, no problem found within tests ran. As you report increased issue with two TVs on, I suspect your on coax with cable issue. Inside wiring issues are billable, minimum $99 labor plus $55 for each cable run.If coax cable, looking at ends (compressed not screw or from), cable itself should be RG 6 not RG59, old wall plates, splitter (should only be one, Holland brand). If replacing the physical connections do not work, actually cable bad (store bought, RG59) best to either install up to two wireless receivers (one time charge $49 each) or have tech replace coax with cat5 ($55 per line) Are other issues possible, yes... But coax best describe your issue....Other possibilities include flaky receiver (replace receiver), failing port on RG (replace RG), or other wiring issues outside or inside... Test at nid for errors, no errors at nid is inside wiring issue. Foreign voltage from TV (especially newer TV with amplifier) needing TV grounded requiring you to have grounded outlets (electrician job if not grounded), bad ac power, many use power strip that goes flaky replace the power strip or plug direct into wall outlet. As problem is listed as recent, something changed, what is question and who is responsible for repair (paying to fix). If can rule out inside (electric/cable runs your issue) then equipment and outside is company issue. Request another service call, a fresh set of eyes main reveal something previous tech missed.
-
Error with specfile. 1.Bad Key: [Directories] NIDIR
While running this code from a command line,(and test_spec.txt resides in the same root)
setup.exe test_spec.txt /r:n
I get this error during initialization,
"The following sections are missing from the specfile:
1. Bad Key: [Directories] NIDIR
Please correct the specfile and try again"
Hopefully this is just a syntax problem I am having. But I am using a specfile from the template that came with the media. Here is the section from my test_spec.txt file.
[Directories]
NIDIR=C:\Program Files\National Instruments
I have tried enclosing in quotes, adding spaces around "=" sign, etc. and I get the same error.
Anyone have a working example, or any ideas?
Thanks in advance,
DRI could not get it to work with quotes around the path, seperate folders or the entire string. NIDIR=C:\ did not work either.
I finally got it to work by commenting out the NIDIR in the specfile.txt, which installs in the default directory.
Something strange that I found however.
There is different syntax available when calling setup.exe, depending on how you call it.
From a cmd line type, setup.exe /? your get a message box with the available SETUP syntax options.
Then run setup.exe /? from within a simple batch file and you get a message box with the avaiable USAGE syntax options.
MY users will want specific components installed besides the defaults.
Does anyone have working code for using the setup.ini or setup.inf silent install options?
Thanks in advance,
DR -
Change DB_NAME error with nid (NID-00135)
I use the nid to change the DB_NAME but it always return the following error:
NID-00135: there is 1 active threads
What I do is, in dos prompt
use sqlplus
shutdown immediate;
startup mount;
exit;nid target system/password@OLDNAME DBNAME=NEWNAME SETNAME=YES
My environment is
Oracle 10.2.0.3 RAC in window environment.
Can anyone help ? Thanks !NID-00135: There are number active threads
Cause: is that the database crashed the last time it was shut down.
Action: Ensure that all threads are closed before retrying the operation. Start and open the database to perform crash recovery, then shut down with the NORMAL or IMMEDIATE options to close it cleanly. Finally, try running the utility again.
Is it possible, second instance is still running?
Werner -
Fatal Error!! Required NIPathsDir property NIDIR is undefined.
I receive this message while trying to install the signal express sw. When I get this message the installation is aborted. My scope is also not recognized by my pc device manager. I do not have labview installed on my pc, do I need it?
Steve29,
I apologize that you are having trouble installing SignalExpress. Is this with the SignalExpress 2.0 installation CD? If so, can you run the installer using the following in a command prompt :
<PATH TO CD>\setup.exe /log c:\temp\SEinstallerlog.txt
This will create a logfile from the installer in your "C:\temp\" folder with the name "SEinstallerlog.txt". Send that installer log to me at [email protected] I'll look at it to see what happened and get back to you with a way to correct it. This error should never be displayed in a released software product and I would like the logfile so I can see why it happened and correct it.
Thank you,
Eric Reffett -
Error when assigning a value to a class
Hi,
Here's what I have:
package com.myprograms.tools1;
public class A
public long orderId;
public int nameId;
public int carId;
public int anId;
package com.myprograms.tools1;
public class B
public A classOfA;
//MAIN Program
import com.myprograms.tools1;
public class getClass
B b= new B();
b.classOfA.orderId = 10029292;
I get a Null Pointer Exception when I assign a value to the var.
Can anybody help point out the problem?
Thanks!What exactly is the error message... i.e. line numbers and class names...
Example: Full thread dump Java HotSpot(TM) Client VM (1.5.0-beta2-b51 mixed mode, sharing
"SIGINT handler" daemon prio=10 tid=0x03264410 nid=0xea0 waiting for monitor ent
ry [0x080bf000..0x080bfa68]
at java.lang.Shutdown.exit(Unknown Source)
- waiting to lock <0x2b31a868> (a java.lang.Class)
at java.lang.Terminator$1.handle(Unknown Source)
at sun.misc.Signal$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Okay, that was too funny... LOL...
This example error is courtesy of me being a complete... Well, let's just say, that was dumb...
It has almost been an hour since I launched off that little app...
You know you did something wrong when you can actually hear the HardDrive and Fan slow down...
Anyway... LOL... what are the errors, and what is the rest of the code ? or is it fixed now...
- MaxxDmg...
- ' He who never sleeps... ' -
Error while running adlnkoh.sh
I am performing cloning of Oracle Apps R12 version 12.0.4
Using cold backup single node to single node.
I got an error and i checked the logfile i got this
Error while running adlnkoh.sh.
return code = .1.7.12.14.15.16.17.18.19.21.22.23.24.25.26.27.30.32.33.34.42.43.44.45.46.47.48.49.51.52.53.54.55.56.57.58.59.60.62
Please check logfile located at /oracle/cloning/db/tech_st/10.2.0/appsutil/log/TEST1_zishan/make_12091249.log
Then I had seen above logfile and i got this error
running genclntsh...
/oracle/cloning/db/tech_st/10.2.0/lib/libcore10.a: could not read symbols: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
Failed to generate client shared library on Thu Dec 9 12:49:07 IST 2010...
rm -f oracle dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest expdp impdp imp exp sqlldr rman nid extjob extjobo genezi ikfod grdcscan /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/ksms.s /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/ksms.o
Completed removing old executables on Thu Dec 9 12:49:07 IST 2010...
/usr/bin/gcc -O2 -I/oracle/cloning/db/tech_st/10.2.0/rdbms/demo -I/oracle/cloning/db/tech_st/10.2.0/rdbms/public -I/oracle/cloning/db/tech_st/10.2.0/plsql/public -I/oracle/cloning/db/tech_st/10.2.0/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -c -o config.o config.c
Completed relinking target config.o ...
Completed linking target links on Thu Dec 9 12:49:09 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/precomp/lib
Linking /oracle/cloning/db/tech_st/10.2.0/precomp/lib/proc
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
/bin/chmod: cannot access `/oracle/cloning/db/tech_st/10.2.0/precomp/lib/proc': No such file or directory
make: *** [oracle/cloning/db/tech_st/10.2.0/precomp/lib/proc] Error 1
Failed linking target relink on Thu Dec 9 12:49:10 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/rdbms/lib
/usr/bin/ar cr /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/libknlopt.a /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/kkpoban.o
/oracle/cloning/db/tech_st/10.2.0/lib//libcore10.a: could not read symbols: No more archived files
collect2: ld returned 1 exit status
make: *** [oracle/cloning/db/tech_st/10.2.0/rdbms/lib/oracle] Error 1
Failed linking target oracle on Thu Dec 9 12:49:12 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/network/lib
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
Failed linking targets nnfgt.o mkldflags client_sharedlib on Thu Dec 9 12:49:12 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/sqlplus/lib
make: *** [sqlplus] Error 1
Failed linking target sqlplus on Thu Dec 9 12:49:12 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/rdbms/lib
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
make: *** [trcroute] Error 1
Failed linking target install ((ins_net_client.mk) on Thu Dec 9 12:49:12 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/plsql/lib
chmod 755 /oracle/cloning/db/tech_st/10.2.0/bin
make: *** [ctxload] Error 1
Failed linking target install on Thu Dec 9 12:49:13 IST 2010...
/oracle/cloning/db/tech_st/10.2.0/sysman/lib
make -f /oracle/cloning/db/tech_st/10.2.0/sysman/lib/ins_sysman.mk relink_sharedobj SHAREDOBJ=libnmemso
Error found while relinking
return code = .1.7.12.14.15.16.17.18.19.21.22.23.24.25.26.27.30.32.33.34.42.43.44.45.46.47.48.49.51.52.53.54.55.56.57.58.59.60.62No it is not packages problem i had check all the packages it is showing some relinking error.
Please do help me out, I am sending u the log record of make file
/oracle/cloning/db/tech_st/10.2.0/appsutil/log/TEST1_zishan/make_12091509.log
running genclntsh...
/oracle/cloning/db/tech_st/10.2.0/lib/libcore10.a: could not read symbols: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
Failed to generate client shared library on Thu Dec 9 15:09:21 IST 2010...
rm -f oracle dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest expdp impdp imp exp sqlldr rman nid extjob extjobo genezi ikfod grdcscan /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/ksms.s /oracle/cloning/db/tech_st/10.2.0/rdbms/lib/ksms.o
Completed removing old executables on Thu Dec 9 15:09:21 IST 2010...
/usr/bin/gcc -O2 -I/oracle/cloning/db/tech_st/10.2.0/rdbms/demo -I/oracle/cloning/db/tech_st/10.2.0/rdbms/public -I/oracle/cloning/db/tech_st/10.2.0/plsql/public -I/oracle/cloning/db/tech_st/10.2.0/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -c -o config.o config.c
Completed relinking target config.o ...
make[1]: *** [oracle/cloning/db/tech_st/10.2.0/sysman/lib/nmccollector] Error 1
make[1]: Leaving directory `/oracle/cloning/db/tech_st/10.2.0/sysman/lib'
make: *** [nmccollector] Error 2
Failed linking target collector on Thu Dec 9 15:09:34 IST 2010...
The value of IS_RAC:false
Error found while relinking
return code = .1.7.12.14.15.16.17.18.19.21.22.23.24.25.26.27.30.32.33.34.42.43.44.45.46.47.48.49.51.52.53.54.55.56.57.58.59.60.62 -
Error deploy Jboss and Weblogic with JDev 10.1.3.0.3 EA
Hi,
I'm having problem with deploy application make with JDev 10.1.3.0.3 EA
in a Jboss 4.0.2 and Weblogic 8.1. Very simple app with JSF.
The error seems to be in application.xml. Maybe because xml schema.
It is a bug? Are there a workround?
Thanks!
The log of Jboss:
2005-09-23 16:04:40,863 DEBUG [org.jboss.deployment.MainDeployer] Starting deployment of package: file:/usr/local/jboss-4.0.2/server/default/deploy/appnovotestejsf.ear
2005-09-23 16:04:40,863 DEBUG [org.jboss.deployment.MainDeployer] Starting deployment (init step) of package at: file:/usr/local/jboss-4.0.2/server/default/deploy/appnovotestejsf.ear
2005-09-23 16:04:40,863 DEBUG [org.jboss.deployment.MainDeployer] Copying file:/usr/local/jboss-4.0.2/server/default/deploy/appnovotestejsf.ear -> /usr/local/jboss-4.0.2/server/default/tmp/deploy/tmp12285appnovotestejsf.ear
2005-09-23 16:04:40,864 DEBUG [org.jboss.deployment.MainDeployer] using deployer org.jboss.deployment.EARDeployer@510e39
2005-09-23 16:04:40,864 INFO [org.jboss.deployment.EARDeployer] Init J2EE application: file:/usr/local/jboss-4.0.2/server/default/deploy/appnovotestejsf.ear
2005-09-23 16:04:40,866 ERROR [org.jboss.metadata.XmlFileLoader] Invalid XML: file=META-INF/application.xml@-1:2
java.lang.IllegalStateException: can't declare any more prefixes in this context
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:691)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
at org.jboss.metadata.XmlFileLoader.getDocument(XmlFileLoader.java:313)
at org.jboss.metadata.XmlFileLoader.getDocument(XmlFileLoader.java:257)
at org.jboss.deployment.EARDeployer.init(EARDeployer.java:127)
at org.jboss.deployment.MainDeployer.init(MainDeployer.java:828)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:765)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:121)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:127)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy8.deploy(Unknown Source)
at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:325)
at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:483)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:204)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.loop(AbstractDeploymentScanner.java:215)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.run(AbstractDeploymentScanner.java:194)
2005-09-23 16:04:40,867 ERROR [org.jboss.deployment.MainDeployer] Could not initialise deployment: file:/usr/local/jboss-4.0.2/server/default/deploy/appnovotestejsf.ear
org.jboss.deployment.DeploymentException: Invalid XML: file=META-INF/application.xml@-1:2; - nested throwable: (java.lang.IllegalStateException: can't declare any more prefixes in this context)
at org.jboss.metadata.XmlFileLoader.getDocument(XmlFileLoader.java:328)
at org.jboss.metadata.XmlFileLoader.getDocument(XmlFileLoader.java:257)
at org.jboss.deployment.EARDeployer.init(EARDeployer.java:127)
at org.jboss.deployment.MainDeployer.init(MainDeployer.java:828)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:765)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:121)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:127)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy8.deploy(Unknown Source)
at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:325)
at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:483)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:204)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.loop(AbstractDeploymentScanner.java:215)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.run(AbstractDeploymentScanner.java:194)
Caused by: java.lang.IllegalStateException: can't declare any more prefixes in this context
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:691)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
at org.jboss.metadata.XmlFileLoader.getDocument(XmlFileLoader.java:313)
... 23 more
2005-09-23 16:04:40,869 DEBUG [org.jboss.deployment.scanner.URLDeploymentScanner] Failed to deploy: org.jboss.deployment.scanner.URLDeploymentScanner$DeployedURL@e3ab9801{ url=file:/usr/local/jboss-4.0.2/server/default/deploy/appnovotestejsf.ear, deployedLastModified=1127502101000 }
org.jboss.deployment.DeploymentException: Invalid XML: file=META-INF/application.xml@-1:2; - nested throwable: (java.lang.IllegalStateException: can't declare any more prefixes in this context)
at org.jboss.metadata.XmlFileLoader.getDocument(XmlFileLoader.java:328)
at org.jboss.metadata.XmlFileLoader.getDocument(XmlFileLoader.java:257)
at org.jboss.deployment.EARDeployer.init(EARDeployer.java:127)
at org.jboss.deployment.MainDeployer.init(MainDeployer.java:828)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:765)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:738)
at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:141)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:80)
at org.jboss.mx.interceptor.AbstractInterceptor.invoke(AbstractInterceptor.java:121)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.interceptor.ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor.java:127)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:74)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:249)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:644)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy8.deploy(Unknown Source)
at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:325)
at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:483)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:204)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.loop(AbstractDeploymentScanner.java:215)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.run(AbstractDeploymentScanner.java:194)
Caused by: java.lang.IllegalStateException: can't declare any more prefixes in this context
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:691)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
at org.jboss.metadata.XmlFileLoader.getDocument(XmlFileLoader.java:313)
... 23 moreThe test is easer.
I make a new Empty Project like J2EE13. After create a new JSP (Web tier -> JSP).
I chose j2ee version 1.3. So I put some jsp code inside, like
<body>
<%
out.write("Teste J2EE 1.3");
%></body>
After I create a new Deployment Profiles WAR File.
Make a build, a .war file and .ear and everythink worked.
So I make a J2EE Deplyment Descriptor Wizard with version 1.3
And make rebuil project.
JDev don't finish the rebuild. The thread dump with CRTL+BREAK :
Full thread dump Java HotSpot(TM) Client VM (1.5.0_05-b03 mixed mode):
"Log Page Updater" prio=5 tid=0x07d0ee78 nid=0x9d8 waiting on condition [0x08a8f000..0x08a8f9e8]
at java.lang.Thread.sleep(Native Method)
at oracle.jdeveloper.compiler.CompilerPage$2.run(CompilerPage.java:536)
"CompileThread" prio=5 tid=0x07d0e4f8 nid=0x94c in Object.wait() [0x0858f000..0x0858fa68]
at java.lang.Object.wait(Native Method)
at oracle.javatools.buffer.ReadWriteLock.readLock(ReadWriteLock.java:385)
- locked <0x141e7408> (a oracle.javatools.buffer.ReadWriteLock)
at oracle.javatools.buffer.ReadWriteLock.readLock(ReadWriteLock.java:252)
at oracle.javatools.buffer.AbstractTextBuffer.readLock(AbstractTextBuffer.java:1112)
at oracle.ide.model.TextNode$TextBufferWrapper.readLock(TextNode.java:1781)
at oracle.javatools.buffer.TextBufferReader.<init>(TextBufferReader.java:52)
at oracle.javatools.buffer.TextBufferFactory.createReader(TextBufferFactory.java:167)
at oracle.bali.xml.addin.XMLSourceNode.doWellFormednessCheckDuringMake(XMLSourceNode.java:382)
at oracle.bali.xml.addin.translator.XmlTranslator.translate(XmlTranslator.java:198)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildGraph(UnifiedBuildSystem.java:299)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProjectFiles(UnifiedBuildSystem.java:514)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildProject(UnifiedBuildSystem.java:607)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.buildAll(UnifiedBuildSystem.java:664)
at oracle.jdeveloper.compiler.UnifiedBuildSystem$CompileThread.run(UnifiedBuildSystem.java:884)
"Thread-22" prio=7 tid=0x069eb8b0 nid=0x9c8 in Object.wait() [0x08c8f000..0x08c8fae8]
at java.lang.Object.wait(Native Method)
at oracle.javatools.buffer.ReadWriteLock.readLock(ReadWriteLock.java:385)
- locked <0x141e7408> (a oracle.javatools.buffer.ReadWriteLock)
at oracle.javatools.buffer.ReadWriteLock.readLock(ReadWriteLock.java:252)
at oracle.javatools.buffer.AbstractTextBuffer.readLock(AbstractTextBuffer.java:1112)
at oracle.ide.model.TextNode$TextBufferWrapper.readLock(TextNode.java:1781)
at oracle.jdevimpl.todo.ToDoManagerImpl._getToDoListFromNode(ToDoManagerImpl.java:1020)
at oracle.jdevimpl.todo.ToDoManagerImpl.maS$_getToDoListFromNode(ToDoManagerImpl.java)
at oracle.jdevimpl.todo.ToDoManagerImpl$ToDoItemManager$1.construct(ToDoManagerImpl.java:2083)
at oracle.ide.util.SwingWorker$1.run(SwingWorker.java:119)
at java.lang.Thread.run(Thread.java:595)
"IconOverlayTracker Timer" prio=5 tid=0x07367168 nid=0x4c8 in Object.wait() [0x0848f000..0x0848fb68]
at java.lang.Object.wait(Native Method)
- waiting on <0x140880b0> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x140880b0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"Persistence Auto Flusher" daemon prio=5 tid=0x0770d660 nid=0xfec in Object.wait() [0x0958f000..0x0958fc68]
at java.lang.Object.wait(Native Method)
- waiting on <0x1401ee28> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x1401ee28> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"IdeMinPriorityTimer" daemon prio=2 tid=0x06a58c90 nid=0xff0 in Object.wait() [0x0948f000..0x0948f9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x13d61428> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x13d61428> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"AuditExecutor-5" daemon prio=7 tid=0x07620e50 nid=0x6f8 in Object.wait() [0x0928f000..0x0928fa68]
at java.lang.Object.wait(Native Method)
- waiting on <0x13d45398> (a oracle.javatools.util.SynchronizedQueue)
at java.lang.Object.wait(Object.java:474)
at oracle.javatools.util.SynchronizedQueue.remove(SynchronizedQueue.java:61)
- locked <0x13d45398> (a oracle.javatools.util.SynchronizedQueue)
at oracle.jdevimpl.audit.util.SwingExecutor.run(SwingExecutor.java:467)
at java.lang.Thread.run(Thread.java:595)
"WaitCursorTimer" daemon prio=5 tid=0x073e7428 nid=0x3f4 in Object.wait() [0x08b8f000..0x08b8fbe8]
at java.lang.Object.wait(Native Method)
- waiting on <0x134b6160> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x134b6160> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"BufferDomModel background parse thread" daemon prio=2 tid=0x03c9f8c0 nid=0x690 in Object.wait() [0x0898f000..0x0898fce8]
at java.lang.Object.wait(Native Method)
- waiting on <0x1318a2e8> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x1318a2e8> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"WeakDataReference polling" prio=2 tid=0x072afba0 nid=0x664 in Object.wait() [0x0888f000..0x0888fd68]
at java.lang.Object.wait(Native Method)
- waiting on <0x1318c598> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x1318c598> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at oracle.ide.util.WeakDataReference$Cleaner.run(WeakDataReference.java:88)
at java.lang.Thread.run(Thread.java:595)
"Native Directory Watcher" prio=2 tid=0x06c4ba00 nid=0x350 runnable [0x0868f000..0x0868fa68]
at oracle.ide.natives.NativeHandler.enterWatcherThread(Native Method)
at oracle.ide.natives.NativeHandler$1.run(NativeHandler.java:244)
at java.lang.Thread.run(Thread.java:595)
"IconOverlayTracker Timer" prio=5 tid=0x069d2bd0 nid=0x948 in Object.wait() [0x0838f000..0x0838fb68]
at java.lang.Object.wait(Native Method)
- waiting on <0x12fd96e0> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:474)
at java.util.TimerThread.mainLoop(Timer.java:483)
- locked <0x12fd96e0> (a java.util.TaskQueue)
at java.util.TimerThread.run(Timer.java:462)
"TimerQueue" daemon prio=5 tid=0x03db5be0 nid=0x924 in Object.wait() [0x0657f000..0x0657fb68]
at java.lang.Object.wait(Native Method)
- waiting on <0x12903aa0> (a javax.swing.TimerQueue)
at javax.swing.TimerQueue.run(TimerQueue.java:233)
- locked <0x12903aa0> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
"AWT-EventQueue-0" prio=7 tid=0x03d78958 nid=0x34c in Object.wait() [0x0443f000..0x0443fbe8]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:474)
at java.awt.EventQueue.getNextEvent(EventQueue.java:345)
- locked <0x128687b8> (a java.awt.EventQueue)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:189)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"Java2D Disposer" daemon prio=10 tid=0x03d757e8 nid=0xf4c in Object.wait() [0x0423f000..0x0423fce8]
at java.lang.Object.wait(Native Method)
- waiting on <0x1286a2c0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x1286a2c0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at sun.java2d.Disposer.run(Disposer.java:107)
at java.lang.Thread.run(Thread.java:595)
"AWT-Windows" daemon prio=7 tid=0x03d6d660 nid=0x698 runnable [0x0413f000..0x0413fd68]
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:269)
at java.lang.Thread.run(Thread.java:595)
"AWT-Shutdown" prio=5 tid=0x03d68d78 nid=0x8c8 in Object.wait() [0x0403f000..0x0403f9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x1286a3a8> (a java.lang.Object)
at java.lang.Object.wait(Object.java:474)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x1286a3a8> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:595)
"Low Memory Detector" daemon prio=5 tid=0x013ca0a8 nid=0x10c runnable [0x00000000..0x00000000]
"CompilerThread0" daemon prio=10 tid=0x013c8e00 nid=0x8c0 waiting on condition [0x00000000..0x03b1f8cc]
"Signal Dispatcher" daemon prio=10 tid=0x013a9ac8 nid=0x99c waiting on condition [0x00000000..0x00000000]
"Finalizer" daemon prio=9 tid=0x0135b940 nid=0x11c in Object.wait() [0x0391f000..0x0391fc68]
at java.lang.Object.wait(Native Method)
- waiting on <0x1280f808> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x1280f808> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x0139bb58 nid=0x4a8 in Object.wait() [0x0381f000..0x0381fce8]
at java.lang.Object.wait(Native Method)
- waiting on <0x1280f888> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x1280f888> (a java.lang.ref.Reference$Lock)
"main" prio=5 tid=0x00846878 nid=0x840 waiting on condition [0x00000000..0x0012fb60]
"VM Thread" prio=10 tid=0x0084f410 nid=0x77c runnable
"VM Periodic Task Thread" prio=10 tid=0x013dcac8 nid=0x8f0 waiting on condition
Close JDev and reopen don't resolve.
Thanks. -
Error while opening the leave approval
Dears,
We are getting an error as "Attribute HR_NTF_EMBEDDED_REGION with value JSP:/OA_HTML/OA.jsp?OAFunc=-&HR_EMBEDDED_REGION-&NtfId=-&#NID- refers invalid framework URL" while a user is opening the approval screen for a leave of his sub ordinate. It seems that no one has the issue apart from this person though. Any advice please? It was working fine so far...Version 12.1.3....11g DB....Hi,
I have asked the approver to reject the transaction and informed teh sub ordinate to try again. I will keep you guys posted of how it goes. -
Hello Community
Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully.
I was able to understand Event Viewer logs, there was supposed to be 4 possibilities
one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
the error still occurred.
Then I used a Powershell command that displayed output but the Output doesn't make sense
because it is saying the login failed associated with the database that was created by the Search
Service application when it was created.
But how can that username be related to the Search Service database? Below is the output:
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
Area : SharePoint Foundation
Category : Logging Correlation Data
Level : Medium
EventID : xmnv
Message : Site=/
Area : SharePoint Server
Category : Database
Level : High
EventID : 880i
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlCli
ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlCli
ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser
.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
opyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
in(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) a
t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
onString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient
.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sy
stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
derInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionF
actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
ons) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.
Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderB
ase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFa
ctory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCo
nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.S
qlConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
Area : SharePoint Server
Category : Database
Level : High
EventID : 880k
Message : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
eryData monitoringData, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
er(SqlCommand command, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.Schema
Database.GetSchemaHighLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
Time() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Admin
istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) a
t Microsoft.Office.Server.UserProfiles.Co...
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
e login failed.' Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
eNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : 880j
Message : SqlError: 'Login failed for user Server1\User1.' Source: '.Net SqlClient Data Provider' Number: 18456
State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
Area : SharePoint Server
Category : Database
Level : High
EventID : tzku
Message : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15' ConnectionState: Closed ConnectionTimeout
: 15
Area : SharePoint Foundation
Category : Runtime
Level : Unexpected
EventID : tkau
Message : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
equested by the login. The login failed. Login failed for user Server1\User1. at System.Data.SqlClie
nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClie
nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.
Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
pyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
n(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
nString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.
SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at Sys
tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
erInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFa
ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
ns) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.D
ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBa
se.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFac
tory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCon
nection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.Sq
lConnection.Open() at Microsoft.Office.Server.Data.SqlSession.OpenConnection() at Microsoft.Office.S
erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
a, Boolean retryForDeadLock) at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
, Boolean retryForDeadLock) at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
hLevelInfo() at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime() at Microso
ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
nID, SearchServiceApplicationProxy searchAppProxy) at Microsoft.Office.Server.Administration.UserProfile
ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName) at Microsoft.Office.Se
rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName) at Microsoft.Office.Server
.UserProfiles.CoreProperty.get_ManagedPropertyName() at Microsoft.SharePoint.Portal.WebControls.ProfileP
ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch) at Microsoft.SharePoint.Porta
l.WebControls.ProfileUI.LoadProfileTable() at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
rol(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.
Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control
.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.U
I.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
, Boolean includeStagesAfterAsyncPoint)
Area : SharePoint Foundation
Category : Monitoring
Level : Medium
EventID : b4ly
Message : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
What does that username have to do with the database created by Search Service Application creation
and why can't I "Edit my profile" in My Profile?
Thank you
ShabeautUse Netmon to analyze the traffic and understand more on same
Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
or mysite
http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
add the SQL Server details into the hosts file on the WFE server.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
If this helped you resolve your issue, please mark it Answered -
Java VM: Java HotSpot(TM) Error in weblogic 8.1 while running crystal rep
I am trying to call crystal reports 9 RAS through weblogic 8.1.
I am running a jsp.
weblogic has jdk141_03.
But, I am getting error at the below line in the jsp.
ReportClientDocument clientDoc = new ReportClientDocument();
The weblogic server crashes out giving below error.
# HotSpot Virtual Machine Error, Internal Error
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.1_03-b02 mixed mode)
# Error ID: 43113F32554E54494D45110E4350500305
# Problematic Thread: prio=5 tid=0x008E12C8 nid=0x6ec runnable
Does anyone know the solution.
thanks..i got the sam problem have you fix it yet ?
please let me know what should i do. -
Change DB_NAME failed with NID-00133: Database should have only consistent.
I have created two testing database for active data guard with Oracle 11g on Linux. I created standby DB by using rman backup from primary database. Now I want to change DB_NAME of standby database. I used DBNEWID utility
%> nid TARGET=SYS DBNAME=newname SETNAME=YES
It generated the error like this
NID-00133: Database should have only consistent datafiles
Change of database name failed during validation - database is intact
Many datafiles even system datafiles are not consistent. I shutdown DB and startup mount again and tried again. It all failed with the same errors. I searched solutions on Oracle Support web and other twchincal web and couldn't find
answers. Please help me to get the solutions. Thanks.Thank each of you so much for your inputs.
Yes, based on oracle document, primary and standby shouid use the same name. But they can have different db_unique_name or instance_name. I created standby by using Grid Control. It automatically assign the same DB_NAME.
I modified db_unique_name. However, our PeopleSoft admin needs to connect to two databases to do testing. PeopleSoft version only support the different DB Name and DB Name cannot be over 8 characters. This is why I tried to
change DB_NAME to meet PeopleSoft Admin's requirement. I think, in the real world for data guard configuration, primary and standby should have the same db_name.
Maybe you are looking for
-
Creation of Procurement Orders
Hi, I'm an APO developper, and I am trying to use the bapi 'BAPI_POSRVAPS_SAVEMULTI3' to create new Procurement Orders of category AG and BF. The problem is, when I call this bapi, I always get an error saying that the value of the ORDER_NUMBER field
-
Disable Item Category Field in Va01using Enhancement Point
Dear Experts, I have a requirement to disable the "Item Category" column in VA01 transaction for certain order types. I have tried using MV45AFZZ(USEREXIT_FIELD_MODIFICATION), but it does not help me much as it works only if a material is entered in
-
Steps for capitalising the AUC to Asset
Hi Guru's, The user has already made the settlement of the internal order created for AUC (CWIP - Asset under construction). Still the amount is able to see in the AUC. So what would be the reason for the amount lying in the AUC? and what are the det
-
X-Fi Elite Pro - What are the inputs behind the soundcar
Hi, I recently bought the Razer Barracuda headset with 5. input connectors. Behind my soundcard i can see the symbol for microphone but the other inputs says? ,2,3,4 and has speaker symbols on em. How do i know which one is for sub and so on ? I cant
-
Can I ask one of the resident experts to give me a brief primer on working with film in FCP? Questions: * What types of variables are there in getting the film transferred to digi-beta? * How do I digitize the resultant digi-beta footage? (are there