NiDMM IVI Error Converter Fails at launch after changing from PXI Chassis PXI-1042Q to PXI-1031. None of the congiguration setup parameters work so the VI won't work

I have changed a PXI system from the development system with a contoller PXI-1042Q to a PXI-1031 chasis using MMI-4 comunications with a XP based commputer. When I try to run my application none of the configutation files for niDMM load. the error I obtain is: "LabView Load error code 3 could not load front panel" Also niDMM IVI Error Converter.vi for Powerline Frequecny, auto zero, ADC calibration,Measurement Digits, offset comp Ohms, multi point, Meas complete dest, Meas complete slope, and fetch multipoint won't load.
Does anyone know what my problem is. I have made sure that the handles I am using in the software match the PXI chassis handles. When I search for the niDMM IVI Error Converter.vi I can't find it on either system.

Hi Foxy-
One thing to make sure is that the driver version on the new system is not older than the driver on the old system. Make sure you have at least the same versions between the two and all should load just fine.
I hope this helps. Let us know if you have any additional questions.
Gary P.
Applications Engineer
National Instruments
Visit ni.com/gettingstarted for step-by-step help in setting up your system.

Similar Messages

Adobe apps fail to launch after copying via ARD 3

For several years we have beeen updating our Adobe apps by updating our master image and copying (via ARD v.1, then v.2, now v. 3) the applications and the associated Application Support files to the target machines. (300 Macs running Tiger) Since upgrading to version 3 of ARD. Adobe apps fail to launch after they are replaced, even with the old files.
I found a post alluding to a known issue with Acrobat from June. It stated it was a known bug that engineering was aware of. THAT was the only mention I could find. Does anyone know anything more about this? This is critical for our publishing workflow - Adobe has two updates that affect us in critical areas that we need to implement, but are reluctant to visit 300 individual desktops (even remotely) and run individual install patches.
The silent install works great for installation, but does not address updates.
Anyone?
Mac OS X (10.4.7)
Mac OS X (10.4.7)

Just FYI. I only had problems with InDesign not launching but this was a know issue with Adobe:
http://www.adobe.com/support/techdocs/331578.html

Photoshop fails to launch after software update

Photoshop fails to launch after the most recent software update. I am running 10.5.5 on a black macbook. It fails to launch every time. I have activated it with the key code, but never registered. What do I need to do to fix this?

Hi jmoser;
Adobe position on PS CS2 is that it is not compatible with Leopard. They say they have no plans to fix it either. According to them the only versions that are compatible with Leopard are CS3 and CS4.
I some people say they don't have any problems using PS CS2 with Leopard but it doesn't appear this is true for everyone.
Allan

CALIBRATION EXCUTIVE 3.5 ERROR -1074118642 occurred at IviDmm IVI Error Converter.vi

您好.
我使用pxi-1033機箱,solt 2插 pxi-4132
                              slot 4插pxi-4071
跑CALIBRATION EXCUTIVE 3.5 執行verify only ,
在current measure時(4132 HI 接4071 從上數下來第3孔, 4132 LO接4071 從上數下來第2孔)
出現下列錯誤訊息:
Error -1074118642 occurred at IviDmm IVI Error Converter.vi
Possible reason(s):
The resolution you have requested is invalid for the current range.
Parameter 4 out of range, or error occurred while setting Parameter 4.
Resolution
Complete call chain:
     IviDmm IVI Error Converter.vi
     IviDmm Configure Measurement.vi
     cex_Instr_IVI_DMM_Configure.vi
     cex_Instr_DMM_Configure.vi
     Verify_NI 4132_Current Output Dmm Communication.vi
     Verify_NI 4132_Current Output.vi
     Verify_NI 4132_Current Output.vi.ProxyCaller
Error -2147352571 occurred at 類型不相符。
in cex_ConvertUserField.vi->cex_ConvertUserFields.vi->cex_ConvertCalData30ToCalData.vi->cex_ConvertCalData30ToCalData.vi
at step Convert CalData30 to CalData.ProxyCaller
This error code is undefined. Undefined errors might occur for a number of reasons. For example, no one has provided a description for the code, or you might have wired a number that is not an error code to the error code input.
Additionally, undefined error codes might occur because the error relates to a third-party object, such as the operating system or ActiveX. For these third-party errors, you might be able to obtain a description of the error by searching the Web for the error code (-2147352571) or for its hexadecimal representation (0x80020005).
請幫忙解決, 是否不能用4071. (7.5 digits)
NI PXI-4132 Calibration Procedure上面寫
DMM :Agilent 3458A (or using at least 7.5 digits)
4071應該解析度是ok.
謝謝.
已解決！
轉到解決方案。
附件:
4132ERROR.JPG ‏123 KB

Hi Peter,
This error is being generated because Cal Exec is trying to set your DMM's resolution to 7.5 digits for a DC current measurement. When taking DC current measurements, the resolution of the PXI-4071 can only be set to a maximum value of 6.5 digits.
Do you have an Agilent 3458A (or equivalent) available to use for the verification process?
Regards,
Jared R.
Precision DC Product Support Engineer
National Instruments

SOS: XAML binding Error: Converter failed to convert value of type '...' to to type '...'

Hi, I'm working on a small Windows store App project using C# + XAML, and encountered a really weird problem with data binding in XAML. The error message is:
Error: Converter failed to convert value of type 'Neptune.MyMatch, SkyNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' to type
'ProgressableBase'; BindingExpression: Path='' DataItem='Neptune.MyMatch, SkyNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'; target element is 'MyControls.ProgressableViewControl' (Name='root'); target property is 'Progressable'
(type 'ProgressableBase').
Error: Converter failed to convert value of type 'Neptune.MyMatch, SkyNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' to type
'IMatchWrapper'; BindingExpression: Path='' DataItem='Neptune.MyMatch, SkyNet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'; target element is 'MyControls.MatchScoreControl' (Name='root'); target property is 'Match' (type 'IMatchWrapper').
the XAML code snippet involved is:
<local:MatchScoreControl Match="{Binding Converter={StaticResource TestConverter}}" />
here:
1) The type of the 'Match' property of 'MatchScoreControl' is 'IMatchWrapper', the type of the DataContext is 'MyMatch'；
2) 'MyMatch' is derived from 'ProgressableBase' and implemented
'IMatchWrapper'；
3) below is the definition of 'MatchScoreControl' and its dependency property 'Match':
public sealed partial class MatchScoreControl : UserControl
public IMatchWrapper Match
get { return (IMatchWrapper)GetValue(MatchProperty); }
set { SetValue(MatchProperty, value); }
public static readonly DependencyProperty MatchProperty =
DependencyProperty.Register("Match", typeof(IMatchWrapper), typeof(MatchScoreControl), new PropertyMetadata(null, OnMatchPropertyChanged));
private static void OnMatchPropertyChanged(DependencyObject d, DependencyPropertyChangedEventArgs e)
// this line will never get called
Debug.WriteLine(e.NewValue.GetType().FullName);
} //more code...
4) TestConverter is a dummy value converter(IValueConverter) which does nothing just to make sure the binding object and target type is as expected:
public sealed class TestConverter : IValueConverter
public object Convert(object value, Type targetType, object parameter, string language)
if (targetType != typeof(IMatchWrapper))
throw new NotImplementedException("Error: targetType is not IMatchWrapper.....");
if (!(value is IMatchWrapper))
throw new NotImplementedException("Error: value is not IMatchWrapper...");
return (IMatchWrapper)value;
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
When I run the app, none of the two exceptions in the TestConverter.Convert() is thrown, which is right and as expected. But the out window keeps throwing the error message as above. This is pretty weird!
I've tried adding a parameterless constructor to the class 'MyMatch', but it doesn't work.
Any suggestion would be appreciated!

Good to know you have the solution and thanks for sharing the experience.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error 150:30 at start after miragtion from old to new macbook

My elements 8.0 did not longer start. Is terminates with error 150:30 . The adobe support could not me in this case. Hope somebody could help me.
Thanks
Berni

thanks for your help. You may right that Adobe Photoshop is not a tidy programm. But it is the only of my applications that make problems after using the MA. Anf for what the MA ist made for?
But i still have a question. Is this cc-cleaner as well working for Photoshop Elements 8.0? I tried the link but at the second step "Uninstall Creative Cloud or Creative Suite applications" I do not find at the Application folder the Utitily folder.
Thanks
Am 16.01.2014 um 17:49 schrieb Barbara B. <[email protected]>:
Re: Error 150:30 at start after miragtion from old to new macbook
created by Barbara B. in Photoshop Elements - View the full discussion
How did you migrate? Unless you cloned over a complete system you just made a bunch more trouble for yourself. You can never, never migrate PSE with the migration assistant. PSE is not a tidy package app in accordance with the apple developer guidelines. It strews stuff all over your hard drive and puts things in places the MA isn't programmed to look. Now you will have a lot of manual cleaning up to do. You must always reinstall PSE from scratch.
First download and run this:
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation -problems.html
Then you can manually remove the bits that got copied over. You can't use spotlight to help with this; it's programmed to ignore these kinds of files. In addition to what's in the applications folder, you will need to go to the library at the top level of your hard drive>Application Support>Adobe and remove anything in there, as well as your username>library>preferences. Then you can reinstall from your original media.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6019607#6019607
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6019607#6019607
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6019607#6019607. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

System clock fails to update after waking from sleep

I've noticed that my new PowerMac G5 Dual-Core 2GHz (running Mac OS X 10.4.3) doesn't update its system clock to the current time after waking from sleep.
When I put it to sleep and then wake it some time later, the Clock in the upper right-hand corner doesn't update to the current time. It still ticks on (second for second) but remains out of sync.
Opening the Date & Time preferences pane will restore the time to the correct setting.
This problem only occurs with sleep and then wake-from-sleep. It doesn't happen when I shut down the machine and then restart it.
Does anybody know if I've got a malfunctioning machine? It's only 1 day old...
Or better still, how do I solve this problem?
PowerMac G5 Dual-Core 2GHz Mac OS X (10.4.3)

No, my Mac is not having trouble contacting the time server. I checked the console log and found no messages related to this.
I am on a broadband always-on connection (recently switched from DSL to cable modem, and the problem occurred under both connections). However, my original post states that the computer loses time only when it is asleep, and I didn't think that my computer could contact the time server when it is asleep. It also loses time when it is off, which I neglected to mention previously. Am I mistaken in thinking that the computer communicates over the network only when it is awake? Since it keeps accurate time when awake (once I've reset it by opening the Date & Time control panel), it seems to me like it IS communicating with the time server without issue.
[And I apologize for misinterpreting your question as a suggestion. I was trying to be polite by thanking you for taking an interest in my issue. I'll watch my semantics more carefully next time.]
Cheers,
Katy
G5/dual core 2.3 Ghz Mac OS X (10.4.4) 2.5G RAM

Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint. I could do this yesterday and today it won't work for some reason. The error says "an unexpected error occurred. PDFMaker was unable to produce the Adobe PDF. How do

Can't create new pdfs from powerpoint; either form within Adobe or within powerpoint. I could do this yesterday and today it won't work for some reason. The error says "an unexpected error occurred. PDFMaker was unable to produce the Adobe PDF. How do I fix this?

Is there a log file in the document folder indicating what the problem was. There are a number of reasons that PDF creation may fail. You can try to print to the Adobe PDF printer to see if there is any indication in that process. The processing is different, but the same problems may show up with both processes.

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.

See:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

I want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, etc. Anybody at Apple listening?

I'm having all kinds of problems since loading Lion and I really wish I hadn't bought it yet. Even after the software update today, 1. my modem still won't work, 2. Photoshop Elements produces muddy photo prints, 3. View preferences in windows don't hold, etc. Anybody at Apple listening? Anybody else out there having these kinds of problems?

10.7 was horrible unstable so I waited until 10.7.1 and tried it again. Well I have to say that it is still a defective OS. I am reverting to Snow as we speak from my carbon clone copy.. This is really the worst OSX I have ever used. It gives me random Kernel panics for no reasons, unstable airport and hundreds of small issues that are just not necessary. For instance I can't use QuickTime in Lion to trim a videoclip ( the UI goes mad and the trimslider becomes inoperable and hangs the Player window ) while in Snow it is no problem. Itunes gives me crackling sound when the equalizer is turned on, Graphical glitches in Photoshop, games crashing, Preview.app not working with some pdfs, so I need Adobes reader which I never used before.. It is definately not ripe for mass usage. Might 10.7.2 or 10.7.3 fix it, but not yet.
* and just for the records : the hardware is absoltely ok. Because in Snow it works as it should. ( So many Lion fanbois are talking : "your Ram is defect", defintely NOT. - Lion is defect! ).
Shame on you Apple.
Message was edited by: Sjazbec

After changing from IE to Firerfox mozilla, the fonts on email are too small and I can't change them

After changing from Internet Explorer to Firefox Mozilla, I noticed the font size, like this one, was the standard font in everything. I want a larger font in '''everything''' I read and type, including emails.

My two suggestions would be find an epub editor, (never seen one sure one exists)
or use Zoom on your device. It's not the best solution, but it shold at least make it readable.
You can enable Zoom under Settings.

Sql is not working after changing from MsAccess into sql server

Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachan

It will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan

[SOLVED]nm-applet fails to launch after update

Hi,
I've just updated NetworkManager and network-manager-applet:
[2012-10-31 20:16] upgraded networkmanager (0.9.6.0-2 -> 0.9.6.4-1)
[2012-10-31 20:16] upgraded network-manager-applet (0.9.6.2-1 -> 0.9.6.4-1)
After reboot nm-applet fails to launch with the following error:
** (nm-applet:6657): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Rejected send message, 2 matched rules; type="method_call", sender=":1.48" (uid=1000 pid=6657 comm="nm-applet ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=267 comm="/usr/sbin/NetworkManager --no-daemon ")
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** Message: applet now removed from the notification area
** (nm-applet:6657): WARNING **: Failed to register as an agent: (32) Session not found
When using sudo nm-applet:
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:6767): WARNING **: Failed to register as an agent: (32) Session not found
Any idea on what went wrong after the update?
Thank you in advance!
EDIT:
While migrating to systemd, I forgot to replace the ConsoleKit line in /etc/pam.d/slim with:
session required pam_systemd.so
->Problem solved
Last edited by geekmiki (2012-11-01 00:53:29)

Related news: https://www.archlinux.org/news/consolek … by-logind/

2 comp's, two ver winxp, 3 downloads, same error - Desktop fails to launch.

Symptoms:
Desktop manager fails to launch.
Installs fine - but afterwards, launching the application results in: rimbblaunchagent.exe loading into the process field of the Task Manager....and that's it.
No windows. No apps...no error msg...no nothing.
If I end task the process - and start again (either via the desktop launcher or going directly to the installed directory)... same thing.
Attempted Solutions:
Uninstalled/Reinstalled Application.
Downloaded a new copy of the Desktop software (http://www.blackberry.com/desktop)
Formatted the box with a different install disk for winxp.
once installed, I updated the patches, installed SP3, etc..
Also installed comodo internet security suit / Firefox 4, VLC, Spybot, WinRAR
-- Ran Spybot and immunized the system
-- In the firewall I locked IE from accessing the web
Downloaded new copy of desktop software
Choose, Run As: Administrator
Clean Install...etc.... Same End result.
The only things I see being the same between this new install and the old one are:
IE is behind the firewall
Spybot Immunization
I've reach the sticky's... seached the forums... used Google... and still striking out....
Question - Could IE being locked up be the issue?
I can't see how....but...
I'm new to Comodo firewall...not seeing how to remove IE from the blocked application list... I'll try to undo that part and try again...
Elsewise I'm wide open - Let me know.
Thanks

Hmmm... could be a corrupt profile.
Try this.
1. Uninstall Access Connections (but don't delete the profiles)
2. After the reboot, open REGEDIT.
3. In the left pane, expand HKEY_LOCAL_MACHINE, then SOFTWARE, then Lenovo
4. Still in the left pane, right click on Access Connection and choose export
5. Assign an appropriate filename and click Save (I suggest somewhere on the Desktop).
6. Right click on Access Connections again and choose delete.
7. Open Windows Explorer and go to C:\Program Files\Thinkpad\ConnectUtilities directory.
8. Delete any files in this directory.
9. Reinstall Access Connections v5.50
10. Try and create a profile.
If you still get an error trying to create a profile, then something else is broken. Be sure you have .NET 3.5 SP1 (it may be under optional downloads in Windows Update).
If it works fine, then you have a bad profile. Unfortunately, there isn;t an easy way to figure out which one other than try and error of delete profiles and trying one at a time.
To restore your profiles.
1. Unistall Access Connections. Reboot.
2. Double click the saved .reg file on your Desktop and answer Yes to merge it into the registry.
3. Install Access Connections. Reboot.

NiDMM IVI Error Converter Fails at launch after changing from PXI Chassis PXI-1042Q to PXI-1031. None of the congiguration setup parameters work so the VI won't work

Similar Messages

Maybe you are looking for