Nintendo DS and AirPort base station
I have a Nintendo DS gaming console that connects to other consoles via WiFi. I also have a game of which I have the option of playing against other people over broadband internet. I was wondering if maybe I could connect to the internet with my DS if I had an AirPort base station?
If it would indeed work, great. I wouldn't have to buy anything else. If not, I can always drop in to a local "hot spot."
Thanks
ML1986
ML1986, Welcome to the discussion area!
Yes.
Have you looked at the other DS threads?
Nintendo DS WiFi
Nintendo DS wifi and airport
Internet Sharing / Nintendo DS
Nintendo DS, Airport and Settings?
Airport Extreme and Nintendo DS - the basics
etc.
Similar Messages
-
Sky and Airport Base Station setup
Hi,
I seem to be having all kinds of issues with my Wireless network setup. So much so that I'm going insane with it all.
Now I don't pretend to be an expert in networking issues, I'm a consumer and I am a designer - I don't do technical stuff. Hence why I am asking the question here.
But I am a good listener, and I'm hoping to learn how to do this the right way.
Ok.
I have a router that came with my Sky Broadband, and I have an Airport Base Station which I connect to my Sky Router and broadcast a network from the Airport.
Problem is I think I've messed up settings and it's just on an unbelievable go-slow.
Rather than me try and detail all my settings, what are the ideal settings for something like this?
I'm getting less than 1mb download speeds, when I should be getting closer to 7.
I've got iStumbler installed and i've got like 40% signal with 12% noise.
Now I've just noticed my Airport Base Station is showing a warning icon and that the device is not found.
Help.Timothy, you're right... the change to 10.4.8 has had us in "Airport ****" ever since the update. Whenever the PB can't find the Airport Extreme (more than 1/2 the time), we open "Network" in "System Preferences" and it's trying to use a 10.xxx address, instead of the 192.xxx or 168.xxx that it should be using.
Our work-around has been to click the "Configure" Button in the "Network" window and then click the "Renew DHCP Lease" button. This results in a change to the address... to a 192.xxx address, as it should be.
Your post got me to thinking, so I went into the "Airport Admin Utility", selected our Airport Extreme Base Station, and clicked on the "Configure" icon. When I went to the third tab (Network) I saw the "Share a single IP address" was set to use a 10.xxx address! What? So, I changed it to use a 192.xxx since there is no 168.xxx option. I have a feeling this may solve our problem... -
Hi,
I have a Win7 Premium and a Time Capsule bought around 2009. I'm using airport utility 5.5.3 and the TC has the 7.6.1 firmware. I can both wirelessly and using the ethernet cabl connect to the network but not to the hard drive (I get the netbios error lthough netbios is enabled). I have pretty much tried ALL the solutions that have worked for many people... too many to mention... the only thing that many people have claimed worked for the (albeit the posts are a bit old) is to revert to the 7.3.2 firmware which I cannot find.
http://www.apple.com/support/?artnum=305301 brings me to the default support page for apple products, so no joy there. this is causing my hair to go prematurely gray.
I am willing to try almost any solution you guys may suggest, but in addition: does anyone know where the 7.3.2 firmware can be found?
I don't need a book corner as I read most books in e-format...
thanks in advance.Model# A1302
When I do the "firmware update" I have no options except:
other
as a former IT, I have exhausted all options I think except for rolling back the firmware.
The apple site isn't down but the page: http://www.apple.com/support/?artnum=305301
which has the link for the 7.3.2 firmware takes me to the default support page.
On another note (for anyone who has run into this problem and recognizes the symptom), when I submit the password on the apple popup that says "network disc detected, enter password" the pop up pauses for a good minute (not responding) before the #53 error with the netbios comes on. I have also turned off the McAfee firewall and tested it... no joy.
Thanks for your help in advance -
I've checked my processes with activity monitor and can not figure out why this process is active, (Airport base station unit). I do not have airport enabled in any way and I do not have an airport base unit. Activity monitor tells me this is process #308 and is using 5.22 mb of real memory. When I force to quit, it reappears in a few seconds, I never noticed this activity before. Any help would be appreciated!
Armand Morin1 wrote:
I've checked my processes with activity monitor and can not figure out why this process is active, (Airport base station unit). I do not have airport enabled in any way and I do not have an airport base unit. Activity monitor tells me this is process #308 and is using 5.22 mb of real memory. When I force to quit, it reappears in a few seconds, I never noticed this activity before. Any help would be appreciated!
Mine takes about 3MB but 0% CPU.
I looked in my startup items and Airport Base Station Agent is there.
I presume that if your remove it, it will no longer show up in the Activity Monitor.
It's probably installed as a startup item by default, either by the system or the recent update.
If it's not in your login items list, then you have some other problem. -
Mac mini won't recognize airport base station
Hi,
I am posting a new thread because I can't find one that is similar to my case. I have a late 2010 Mac Mini. Here is what happened:
1. Using it this morning to wirelessly print a document. Recieved notice that printer appears off-line.
2. Re-booted printer, re-started airport base (snow white) , no luck.
3. Did above again and restarted Mini... no luck
4. Airport signal indicator suddenly went gray on the bar and notice asking me to join an unrecognized netwok.
5. restarted Mini... would not recognize my network and Airport Base station
6. restarted mini and ABS.. still the same gray bars but being prompted to join someone else's network
7. did no.6, 3-more times... no change
8. Opened airport utility... does not appear in the scan
9. opened network preferences and clicked remember network... restarted... same SIGH!
10. checked system profiler... airport card is on but is "not associated". (Could it be broken but on?)
11. did no.6 again and also restarted DSL modem... same thing
12. Turned on my Macbook ABS recognized and was able to print my document through it no problem.
Until an hour after I turned on my Mini, it was fine.
All other devices 2 macbooks, 2 windows PCs, iPod Touches and wireless printers work.
my first instinct was to do a permissions repair but it was taking to long to finish and had to leave... will this help?
ABS and Mac-mini all have latest updates. frustrated ,have to go to work... PLS HELP.
thanksI'm sure if this is related but I'm also having a problem connecting a pre-2009 mac mini to an Airport base station. I have two others and they are working fine but one will not connect.
I can see the airport station and get a prompt for my password. When I try it, it times out and cannot connect. Another strange thing is the signal is only showing 2 out of 4 bars. The base station is less than 15 feet away and other devices like my iPhone show a very strong signal. The older mini is only 802.11g so I have left the multicast rate on the base station at 2.2 which I believe is the default.
I had been using an 802.11n USB adaptor but I wanted to go back to the internal wifi because the USB adaptor would disconnect whenever the computer went to sleep. I have the mini connected as a media center on a tv so having to always log again was getting frustrating.
I may try a clean install again, but the machine was just formatted and updated with a clean 10.6 about 2 months ago. I didn't install much beyond eyeTV and a few FrontRow plugins. Any ideas on how to debug wifi problems? -
Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found." I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?
Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
AirPort Utility 6.3.1 for Mac - Support - Apple
Then, power off the entire network...all devices...in any order that you want
Wait a minute, then start the modem first and let it run a full minute
Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
Keep starting devices one at a time the same way until the entire network is back up
See if AirPort Utility can "see" the Time Capsule now.
If yes, try another backup. If you encounter an error message, post back with the exact message. -
Where has my airport utility window gone? When I double click on the airport utility icon all I get is a picture of a globe and a base station with no further options available to modify my airport extreme.
Sorry, you lost me on that last post.
Let's start over again.
Open AirPort Utility on your Mac
Are you asked for a password at this point? If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
You need that password to be able to access the settings for the AirPort router in AirPort Utility.
If you see a window listing basic information, click Edit in the upper right corner of the window.
If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
If you forgot the password, a Soft Reset will allow you to go in and reset the base station password. Might be a good idea to write down that password.
If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button. -
How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.
The following example was one of dozens that showed up on a simple Google search of.....
monitor Internet data use on a Mac
Watch your Internet usage with NetUse Monitor | Macworld
Most service providers have an application for their users as well. -
My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software. I'm not sure what to do to remedy this situation.
This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it? -
I deleted Bonjour since I don't need it for remote printing. Now on start-up I get the message: "Airport Base Station Agent has stopped working" and also message: "can't find APAgent.exe.: Do I need AP Agent?? What to do?? Thanks.
The APAgent monitors your AirPort base station and informs you if there are things like firmware updates available. This utility relies on Bonjour, but is not required for base station operation. However, Bonjour makes it easier for your PC to "find" the base station via the AirPort Utility and I would recommend that you keep it installed. If you don't want the APAgent, you can just use the Apple Updater utility (that was also installed when the AirPort Utility was installed) to remove it.
-
Airport base station and U Verse
Does anyone know how to get an Airport Base Station to connect wirelessly to an ATT U VERSE 2 WIRE modem?
I've used Airport Utility to get the Base Station to join my network but it never finds the ATT network.
Thank you,
CharlieIf your question is about configuring the AirPort Extreme to "extend" or "repeat" the wireless signal from the Uverse wireless router, this is not possible unless the AirPort Extreme is connected directly to the Uverse router using an Ethernet cable.
The AirPort Base Stations can only "extend" or "repeat" the wireless signal when there is also another Apple router providing the signal to be "extended".
Can you clarify how you are trying to configure the AirPort Extreme and what purpose it would provide on your network? -
just got a used airport base station. Set it up and getting wif signal. when I try to hook up on a computer it asks for a security key. where can I locate key?
If you mean the hexidecimal equivalent of the alphanumeric password, then you can find this via the AirPort Utility, as follows:
AirPort Utility > Select the AirPort > Manual Setup
On the AirPort Utility's menubar select Base Station > Equivalent Network Password -
I just updated from OS 10.6 to Mountain Lion. My HPC4780 wireless all-in-one will not print wirelessly, even though it indicates it is getting a wireless signal. I followd the "airport base station firmware updates" suggestions, but my computer can't detect an airport base station, even though I am looking at it, and the light is green like it is supposed to be. The printer works if I connect it, but won't print wirelessly. Any ideas? I am trying to learn Mountain Lion's ins and outs.
I just updated from OS 10.6 to Mountain Lion. My HPC4780 wireless all-in-one will not print wirelessly, even though it indicates it is getting a wireless signal. I followd the "airport base station firmware updates" suggestions, but my computer can't detect an airport base station, even though I am looking at it, and the light is green like it is supposed to be. The printer works if I connect it, but won't print wirelessly. Any ideas? I am trying to learn Mountain Lion's ins and outs.
-
I just got uverse, and when I put my Airport Base Station in Bridge mode I lose access to the 4 airport express stations I have. Can anyone tell me how to turn off the u-verse wireless, set up a network with all the apple stations and still have wireless u-verse tv boxes work? Thanks!
Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half. -
AirPort Base Station disk username and password not working
I got a new AirPort Base Station the other day and everything worked fine until I started to set up the networked disk. On my mac it works fine, it just pops up when I connect to the network ( woot for macs ). On my windows it asks for the username and password. After I enter it it comes up with "Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator." I have tried to log into the disk on 2 other computers running windows xp with the same problem. What is wrong with it and how do I fix it?
Specifically, I had the typical problem connecting when using Windows Live OneCare, despite allowing AirPort Disk Agent in its firewall pop-up.
This is the procedure which unlocked access via AirPort Disk Agent:
Double Click Windows Live OneCare icon in system tray. Or use your own means to get its main window open.
Click the "Change OneCare Settings" topic listed along the left edge column. This will open a new dialog box.
Click the "Firewall" tab of this new dialog box.
Click the "Firewall connection tool" button shown right under the protection level slider. This will open yet another dialog box.
At the top of the list in this "Set up connections" dialog box will be a checkbox (probably unchecked) next to the words "Network Discovery: Browse your network to find printers, computers and other devices."
CHECK THAT BOX.
Close all the dialog boxes using an OK button where available, else the usual [X].
Left-click the AirPort Disk Agent icon in your system tray. From the menu that pops up, select the disk you were having trouble with. Enter its password (the one you know works from a Mac, if appropriate).
After a delay, your "My Computer" window should show a new drive. If you have window settings appropriate to this display, the drive should appear under the "Network Drives" category. In my case, it became drive Z:.
Maybe you are looking for
-
How to add a new plant from a different R3 into the existing new GL design
Hi Experts, We have a scenario where we have a BI system already functional and the the FI reports like balance sheet is already available on the Portal. This flow is based on standard business content for new GL concept Now a new plant has been acqu
-
Syncing iPod Classic 160 to Outlook Calendar
I am able to sync contacts and contact photos, but when I try to sync the Calendar, I receive a message suggesting that I "log out of windows and then log back in." I'm using MS Office 2007 which includes Outlook 2007. Any solutions out there? Thanks
-
How to change SID on a SAP System with Maxdb ?
Hello, I've tryed to migrate /clone a productive system from physical to virtual for testing, and it went OK. Now, i've done the same to another physical machine and SAP 4.6C r3 goes up,as well as the database MaxDB 7.5 on the new machine. but now i
-
Is it possible to make a CD/DVD cover from exisitng Mac OSX software?
Is it possible to make a CD/DVD cover from existing Mac OSX software?
-
Dear , I am working as a SAP SD consultant since 5 years and I am very interested to undergo SAP TM training. Little worried what would be the career growth and scope in the market 5 years down the line. Please seeking your suggetion or guidelines. T