Niorbu.dll not found prevents NI-DAQ from running

I just installed labview 8.6 evaluation SW and I got the niorbu.dll error message. Also I can not open NI-DAQ because of this error. Any help will be appreciated.

Hey jonR,
Did you install the DAQmx driver after installing LabVIEW? The order of installation is important.
I would recommend to reinstall the DAQmx driver in either case, but please post back if this does not fix the problem (also post a screenshot of the error and when exactly it occurs).
Hope this helps!
Misha

Similar Messages

Followed cnet direct. to move itunes from c drive to ext. drive, worked, deleted off c, still worked, now says AVFoundationCF.dll not found-reinstall, don't want to lose data

I recently followed cnet directions to move itunes from c drive on pc running xp pro, to external drive, for space reasons. Process worked. I tunes ran from e drive, verified data on e drive, deleted all apple applications on c drive so I could remove itunes and recover space. Verified itunes still worked off of new short cut and and that target was e drive. Now itunes won't open and get message "AVFoundationCF.dll not found - reinstall", or "not installed correctly Error 7 (windows error 126) - reinstall." Tried download, install from apple.com for itunes on c drive, but message "library can't be read because it was created by a newer version of itunes." How do I fix this without losing all of our "material" saved on the itunes program?

Thank you for the reply, but so far no go. I tried through control panel and add remove programs with repair option as suggested but got error..."C:\programs......AppleAplicationSupport.msi cannot be found." This was after I have done new download and install of itunes to the c drive. I have not taken any steps to try use that down load or reload any material on it. I changed path to external drive an folder, E:\ itunes and got the "error not valid installation package." Still looking for answers...

When I try to open iTunes from my PC, I get a message "aps daemon.exe MSVCR80.dll not found reinstall"

When I try to open iTunes from my PC, I get a message "aps daemon.exe MSVCR80.dll not found reinstall"
I have redownloaded iTunes and still get the same message. It has to do with my Windows Vista in some way? I cannot sync my iPad2, iOS 7.0.4 with my PC.
Can anyone help me? I don't want to lose the thousand and one things I've bought.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?

I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?

TomCT60,
Is your MacBook using Mac OS X 10.6.8 as indicated in your post? If so you will not be able to fully integrate with iCloud.
iCloud and Snow Leopard, by Roger Wilmut describes what iCloud options are available for Snow Leopard.
If you are using Lion, go to iCal>Preferences...>Accounts, and delete/re-add your iCloud CalDAV server.

Dgz.dll not found worked fine till today. Loaded 4.11 bata and still same error

Question should read VGJ.dll not found. Then said reloading the program may correct.
I downloade the bata verion of 4.11 and still get the same error with both 3.6 and 4.11?

Hi schützenkönig:
Many thanks for posting! As you can see, I made my initial post over a week ago, and since there were no responses, I thought perhaps I was the only one this was happening to!
In any event, disabling Protected Mode is the only way I've found to prevent the crashes from happening.
I posted about this on the mozillazine forum -- http://forums.mozillazine.org/viewtopic.php?f=38&t=2551745&sid=7e877237158ffdc560789fb668c 858c0 -- but didn't get very far. Apparently, Firefox is blaming Adobe and has no plans to do anything about it. I was given some reassurance, however, by the comment that adblock plus offers protection from harmful flash content.
By the way, I made a follow on post when I downloaded the latest version of Flash Player -- 11.4.402.278 -- http://forums.adobe.com/message/4708561#4708561
Unfortunately, it did nothing to fix the problem.
Ortho_Fan

TS1717 Getting two error messages when trying to access I Tunes on my Windows 7 Computer: Windows Error 126 and MSVCR80.dll not found

Having difficulty accessing I Tunes on my Windows 7 Vista.
Error messages are two fold:
1. MSVCR80.dll not found. Reinstall may help correct prob.
2. Windows Error 126.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Avfoundationcf.dll "Not Found" [FIX]

I discovered how to fix the problem of "avfoundationcf.dll Not Found" in windows xp 32 bit
You just need to Uninstall and Re-Install the 'AppleApplicationSupport"
Just go to this directory "C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\" and chose the directory "AppleApplicationSupport" with the higher version, my directory is "AppleApplicationSupport 2.1.6" Inside of this directory just run "AppleApplicationSupport.msi" and chose "Remove" when it finish run this file again and chose "Install"
It worked for me
Hope it help :]

This procedure might work or might not work:
Download the free Ccleaner and repair your Registry (repeat until clear)
http://www.piriform.com/ccleaner/download/standard
Uninstall iTunes according to Apple's directions here
http://support.apple.com/kb/HT1925
Use Ccleaner and repair your Registry again just in case.
Then download/install iTunes again from the Apple website
http://www.apple.com/itunes/
Your iTunes content will not be removed,
Please regularly backup your iTunes content to external medium (hard drive, cd/dvd's) using the File>Backup Library in iTunes. Apple will not reissue new copies of content.
(Notice: this post is a copy/paste in a hope that a uninstall/reinstall and repair of your Registry may solve your particular issue, Windows issues are particular difficult to resolve due to multiple factors, so my advice is to be taken into advisement with others recommendations which may be more specific or experienced in resolving your issue. If it or others recommendations solve your issue, please respond back with a "Correct" or "Helpful" or not resolved responses so we can further refine our efforts in trying to successfully assist others. I receive no compensation for product mention.)

Error on boot: "STOP c0000135 unable to locate component csrsrv.dll not found reinstalling the application may fix the problem"

I am running Windows Server 2003 R2 (I know it's old, I'm in the process of upgrading it now to 2012) on an old HP ProLiant server. It's worked for ages, but yesterday morning it booted up with the blue screen of death, saying:
STOP c0000135 unable to locate component csrsrv.dll not found. Reinstalling the application may fix the problem.
I have tried coping the file from C:\WINDOWS\ServicePackFiles\i386\csrsrv.dll to C:\WINDOWS\system32\ using a WS2003R2 recovery disk, but it still doesn't work. I'm not sure what to do now...
I do have backups, but I'd prefer just to get this server back up and running so that I can continue to migration so that I can decommission it permanently and put it out to pasture...
Any help and guidance is greatly appreciated.
Thanks in advance!

If copying the DLL does not help then I would recommend doing a system state restore from a backup.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Tecra M9 - TPSMain.exe cannot start because CpePerf.dll not found

Hi and help,
have searched the web and found other forum threads with similar issues.
Tried all the suggestions to no avail. I am not great on the computer but can find my way around. Anyway....
After login messge following messages pop up in succession, along the lines of : TPSMain.exe cannot start because CpePerf.dll not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found
Computer works fine but Power Saver does not auto start and neither can i select it to from control panel.."toshiba power saver is not running",
so select it from Power options..."failed to start as CpuPerf.dll is not running"
Did all the searching on net and followed all advice... i.e. unistall power saver in safe mode, unistall toshiba common utilities neither can unistall fatal error 0x7e
So download Ccleaner, run checks, unistall with Ccleaner same fatal error.
Been on Toshiba support and tried to install Power Saver......same problem won't install .
So help help help if possible.
Computer is working fine but messages popping up are annoying and i would love power saver to prolong battery.
Tried system restore, though i doubt this affects the files...another problem "system restore could not complete"...tried this several times and cannot system restore either....what is going on???????
any help please
Tim

Cheers for the advice Andrei,
so you suggest there is nothing i can do other than restore from Toshiba recovery disc. Do you think somebody with a bit more knowledge could do sort it out with a less drastic approach..i.e is it worth taking it into a shop? Or do you think they will just have to go down the same route?
If i follow your plan is it just a simple case of downloading all my docs, photos, bookmarks to an external hd and then inserting the recovery disc and following intructions.?? I guess this disc then formats the HD and then reinstalls all the components the laptop came with??? is it infact a drastic approach, or quite simple as a procedure...what do i stand to looose?
Also how do i save xp as this is a version i installed when working/ using my laptop for my previous employer and i no longer have access to the discs/product key.
also could you confirm if this procedure would sort out system restore. I have tried restoring again to several restore points and the procedure will not complete, so this function is definitely not working anymore.
Sorry for more questions but as you can see this is not familair territory for me!!
many many thanks
Tim

Imaq.dll not found

Hi all,
We have a program that acquires images from a camera. We use LV 8.5 and NI-IMAQ. It worked wonderfully until today, when after installation in a customer's computer, the customer tried to run it and got the message "imaq.dll not found" and asked the user to find it.
What is this dll, and why was the program easily able to find it before? Can I just insert imaq.dll into my project so it will have to include it in the installer? If not, does anyone have any ideas?
Thanks in advance,
Danielle
"Wisdom comes from experience. Experience is often a result of lack of wisdom.”
― Terry Pratchett
Solved!
Go to Solution.

Hi Danielle,
You can download the Vision Acquisition software from ni.com. This includes NI-IMAQ. That way you will have the source files you need when you go to create your installer. The link is:
NI Vision Acquisition Software 8.6 - Windows 2000/Vista x64/Vista x86/XP
http://joule.ni.com/nidu/cds/view/p/id/1099/lang/en
Nick Keel
Applications Engineering
National Instruments
Nick Keel
Product Manager - NI VeriStand and Model Interface Toolkit
National Instruments

Mxsxport.dll not found

Hi,
when starting a TestStand Operator Interface or the Sequence Editor I sometimes have the following problem: mxsxport.dll not found!
This seems to be a dll belonging to MAX. I've already added the directory of this dll to the search directories but the failure still happens sometimes.
Any suggestions?
Thanks
Steffen
P.S: I'm using Win2000 on one machine and Win XP on another, both have the problem. TS 3.1, MAX 3.1.1, NI-DAQ 7.4

Hi Scott,
regarding your questions I can tell you the following:
1) I'm using a OI that was modified out of a simple OI shipped with TS. The development environment is CVI 7.1.
2) I attached the error message. Unfortunately it's in German because of German Win2K. But it says that the dll was not found in the listed directories.
3) The OI starts the sequence correctly but stops/hangs when it reaches the first step that uses DAQmx. The DAQmx functions are implemented in a CVI dll (dioclass.dll). I think that the error occurs when the TS Engine tries to load all necessary code modules because the error message pops up after the login screen of the TS Engine. I attach the section of the log window of dependency walker.
4) see #1 and #3 - there are no MAX or DAQ calls in the OI directly. Only my dioclass.dll which is called by TS steps uses DAQ.
I haven't tried to add MAX directory to PATH variable yet but I will do so soon. But I'm not sure if I can make a statement about it because the error is not really repeatable.
Regards
Steffen
Attachments:
mxsxportdll.zip ‏27 KB

Marscore.dll not found

Has anyone got a solution to the error message marscore.dll not found. I stupidly removed this when cleaning up my ddl's and when i then restored it from the ddl archieves I still keep getting the message when trying to go onto microsoft help and support and also can not go onto system restore.

Hello Jason
It seems that the file was infected with any worm or virus.
I found a website where you can download the missing file.
Please take a look on this site:
http://www.dll-files.com/dllindex/dll-files.shtml?marscore
Please let me know if you are successful.
Bye

HT1926 msvcr80.dll not found

I just tried to update Itunes and ended up with installation errors so I decided to download fromw the apple site directly. Now I get a msvcr.dll not found error and can't get to itunes at all. Anyone know how to fix this?

Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
tt2

LIBRFC32.DLL not Found Error

We have installed Data Services 3.2 on a VM running Windows Server 2003 Standard x64 Edition SP2. We are testing an SAP Applications datastore, but when we try to extract data from the SAP system, we get this error:
NT RFC DLL <LIBRFC32.DLL> not found.
I have verified that this file exists in the DS bin folder.
Has anyone encountered this? Could this have something to do with the 64-bit OS?
Thanks

Hi Paul,
In a 64 bits server, you have to add that file in c:\windows\syswow64 instead of system32.
Also, it helps if you install the sapgui in the DS server (not mandatory but recommended).
Cheers,
Diego

Updated to current version and it won't start up. sqlite3.dll not found. Try to reinstall. I have tried many times unsuccessfully. What is the fix?

A pop-up told me to update to the current version. I did. Installation completes successfully. When I try to run the program, open a browser window after installation, I get an error that says sqlite3.dll not found, try to reinstall the program. I have tried uninstalling and reinstalling about a dozen times over the last few days, and I always get the same error.

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

Niorbu.dll not found prevents NI-DAQ from running

Similar Messages

Maybe you are looking for