Nm-applet problem after move to from /opt to /usr

Hello, my nm-applet wont start as normal user after Gnome was moved to /usr, i get this output when trying to start
nm-applet --sm-disable
as normal user:
** (nm-applet:6840): WARNING **: <WARNING>
nma_dbus_init (): nma_dbus_init() could not acquire its service. dbus_bus_acquire_service() says:
'Connection ":1.111" is not allowed to own the service "org.freedesktop.NetworkManagerInfo" due to
security policies in the configuration file'
Whats wrong?
Last edited by Roberth (2007-04-23 14:40:53)

ignore raisefist's message, it's not related to your problem 
networkmanager 0.6.4-5 has changed the policy, so what you need to do to get the applet working again, is add your user to the group network. the strange thing is that you can still use a wired connection without the need of adding the user to network
gpasswd -a username network
should solve your problem.

Similar Messages

  • Problems after upgrading catalog from LR4 to LR5

    After upgrading a LR 4 catalog to LR5, I moved some files around between sub folders.  I then went to sync up the parent folder.  The dialog box said that I would be importing 12,000 photos and deleting 12,000 missing photos.  My folder structure for a ctalog is a parent folder named for the year and the sub folders with the date and shoot description.  I was synchronizing the parent (year) folder.  When it finished, the folder structure was correct and the photos were in their new(correct) folders.  However, all of my LR4 adjustments that had been made in LR4 were gone.  There was no history either.  It was like I was importing for the first time.
    I upgraded the original catalog again and the photos were in the original locations just like the first time I upgraded.  I tried to sync an individual folder and it imported 50 new files and deleted 50 missing files.  Again the LR adjustments were gone.  Any suggestions on how to sync an upgraded catalog without losing my prior version adjustments?
    Mac OS X 10.9.2
    LR 5.3

    Yes, synchronizing is not the tool you should be using in this case, when you move photos from one folder to another. The proper method is to reconnect your photos in Lightroom after you moved them via: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm. But your current catalog has lost its edit information, so this will not help on your current catalog. So ...
    I hope you have a backup of the catalog file before you did the synchronization, or otherwise you will have to upgrade your LR4 catalog again. Open one of those and then reconnect as in the link.
    As side advice, perhaps you might want to consider using an organizing technique that does NOT require moving phtoos/folders from here to there. You might want to consider using organizing and searching via keywords and captions and other metadata, which does not require moving photos, and does not require re-linking photos, and gives you the ability to place photos in more than one "category" (keyword), rather than with folders where a photo can be in at most one "category" (folder)

  • Problem with movies imported from iPad3

    Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
    It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
    I do not have this problem with movie footage imported from any other device.
    Any ideas?

    Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
    It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
    I do not have this problem with movie footage imported from any other device.
    Any ideas?

  • Problems after  migrating application from 10.1.2 to 10.1.3

    Hi,
    I am encountering the following error while executing the application after migrating it from Jdeveloper10.1.2 to JDeveloper10.1.3. Could you please help me in this regard..
    NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : java.lang.NullPointerException
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:60)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:629)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
         at java.lang.Thread.run(Thread.java:595)
    Message was edited by:
    user491067

    Do you have the problem with all JSP pages, or only a few of them ?
    Does it happen in the Embedded OC4J only ?
    Could you try to deploy your application in the Standalone OC4J and test it from there ?
    I had a similar issue where the Embedded OC4J was unnable to run big JSP pages.
    There was no problem with the Standalone OC4J.
    Hope this helps,
    Didier.

  • Screen problem after wake up from sleep

    About three weeks ago I posted a problem with the display coming back to life after waking up from sleep. I said this happened after the 10.5.2 update. This turned out to be not quite accurate. I actually ran all the waiting updates, so I really don't know which one to finger.
    Today, I again ran the 10.5.2 update by itself. Everything is fine. Software Update then identified seven more updates to do, some familiar, some not. I have done all except one, one at a time, and have had no problems with the display coming on after the computer wakes up.
    One more to go: Leopard Graphics Update. This is v1.0 for this update, and here is my question:
    Before I run this update, and face another possible day-long re-install and re-update session, has anyone experienced the problem with the display remaining dark after running this update? I hate to do the update just to see if it causes the problem if there is some information kicking around about this.
    Many thanks again for any help or comment.
    Jim

    Hi rohitgu,
    Welcome to the Apple Support Communities!
    I would suggest using the following article for troubleshooting the display flickering on your iMac. I would specifically Reset the system and Reset the resolution. I know you have done some good troubleshooting already. Have you reset the SMC as well as the PRAM? I also see that you checked the resolution on your computer, but have you started in Safe Mode and adjusted the resolution? Please use the following article as a reference.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    I hope this helps,  
    -Joe

  • BPEL problem after upgrading Jdeveloper from 10.1.3.1.0 to 10.1.3.3.0

    The problem concerns upgrading JDev from 10.1.3.1.0 to 10.1.3.3.0. At the moment I’ve got both versions installed side by side, and when I fire up version 10.1.3.1.0 everything is fine. However when I try and rebuild any of the existing BPEL’s in 10.1.3.3.0, I’m getting errors such as this:
    Error:
    [Error ORABPEL-10903]: failed to read wsdl
    [Description]: in "bpel.xml", Failed to read wsdl.
    Error happened when reading wsdl at "http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL", because "Failed to read WSDL from http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL: HTTP connection error code is 407".
    Make sure wsdl exists at that URL and is valid.
    [Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
    If I put the URL http://trips-services:8888/trips-services/TaxpayerAccountingService?WSDL into my browser, it retrieves the file correctly; my settings in Tools -> Settings -> Web Browser and Proxy are identical in both versions.
    The same or similar errors occur in just about every BPEL I have looked at.
    Does anybody have an idea what the problem might be here?

    Hi Ken,
    Could you tell us how you've defined your proxy exception list ?
    I'm havind the same problems in a 10.1.3.3 environment where I'm not able to deploy a bpel process with an external webservice because of http 407-error.
    Kind regards,
    Nathalie

  • Import/Export problems after patching oracle from 9.2.0.1 to 9.2.0.5

    Hi, After I applied the 5 patch to oracle 9201 on Win XP the export utility has started to complain about
    EXP-00008: ORACLE error 942 encountered
    ORA-00942: table or view does not exist
    EXP-00024: Export views not installed, please notify your DBA
    EXP-00000: Export terminated unsuccessfully
    And after I applied catexp.sql script, it didn't fix the issue with export, the error message has become like this:
    EXP-00056: ORACLE error 31600 encountered
    ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
    ORA-06512: at "SYS.DBMS_METADATA", line 836
    ORA-06512: at line 1
    EXP-00000: Export terminated unsuccessfully
    Can someone advise, what's wrong with it? With oracle 9.2.0.1 export worked fine, after upgrade to 9.2.0.5 it fails every time it gets to the table data export stage.
    Thanks in advise

    It seems that you have found an answer in other forum :
    Imp/Exp problems after patching oracle to 9205
    Nicolas.

  • Problems after upgrading LMS from 4.1 to 4.2.3

    After the upgrade of the LMS we have the situation that all our deviced are visible in the subnet groups but not in "all devices".
    When I want to launch an inventory collection the following message is displayed:
    "ICSU0025: Problem with JRM. The JRM server may not be running. Check ICServerUI.log for more details. See the user guide Administration of CiscoWorks LMS for the log file location."
    When I do a Discovery, the deviced are being discovered but they are unreachable.
    And all the host names are changed into their IP addresses.
    I can't seem to find the problem. Even after roaming the forum here.
    I'm not able to pinpoint the exact cause of the problems...
    Any ideas?
    regards,
    W

    That is a healthy normal state for ANIServer. I checked some similar cases and it seems most of them were transient and got resolved once daemon was reatarted.
    I would suggest to follow this procedure once additionally :
    > Stop Daemon manager
    > Regenerate SSL certificate
    > Do a transaction log for RME DB
    > Start the daemon
    For 2nd and 3rd check my this post for process :
    https://supportforums.cisco.com/message/3597059#3597059
    If this is Solaris/linux, for transaction log, check this link (under Recovering From a Server Crash).
    -Thanks

  • Table Problems after Word Export from RH8

    I am running RoboHelp HTML 8 as part of Technical Communications Suite 2 on Windows XP Professional and exporting to Word 2007. This is a recent upgrade. Previously, I was just running RoboHelp 8 without TCS. All of the Adobe software is completely patched and up-to-date.
    The help system I am converting to Word is large and results in over 600 pages of Word content with a lot of tables (generally just for data presentation and not layout purposes). I'm also using build tags and single-sourcing this document to another, shorter document that is over 400 pages long.
    I have exported various documents from RoboHelp to Word many, many times before, and although I don't like the amount of reformatting I have to do, I'm used to the effort involved. However, the behavior seems to have changed recently.
    These days (possibly after the conversion to TCS?), after I export the help system to Word, all tables are set to have the text wrap around them (Table Properties | Table | Text wrapping | Around). Before, this setting always defaulted to no wrapping. I wouldn't mind this, because I could simply set the tables to have no wrapping, but even after I do so, the full functionality of tables is still not available to me. For example, I can't set to header row to repeat across pages (Layout ribbon | Repeat Header Rows). I also can't set rows to not break across pages (Table Properties | Row | Allow to break across pages). In fact, I can't select a single row of the table generally without selecting the entire table. My coworker found out that you can copy each table into Word Pad and then copy it back into Word as a workaround, but that is extremely tedious. We already waste a lot of time reformatting these documents for various other reasons.
    As a (probably irrelevant) footnote, I convert to .doc rather than .docx, because RoboHelp crashes when I export to .doc. I then save the .doc as a .docx file to conserve file size. The same problem exists in both file formats.
    Thanks in advance for any help you can provide!

    Hi, Peter. Thank you for your thoughtful response.
    Yes, after exporting to Word, I couldn't set the tables' heading rows to repeat and couldn't select individual rows. Also, if I selected the entire table, normally Word would offer me the option to convert the table to text. However, Word seems to think that the table isn't a table, so instead it offers me the option to convert the text to a table. Good times. :-)
    I write the above in the past tense, however, because I discovered a solution. I found a table in the Word output that didn't have the problem, possibly the only one of its kind in the project. In RoboHelp, I compared the HTML source of that table to a table that did have the problem. I discovered that the problematic table had two HTML tags that the unproblematic table did not: <?rh-align_start align="left" ?> and <?rh-align_end ?>. I deleted the tags and presto! The problem was fixed for this table in the Word output. This worked for a couple of other bad tables as well, so I decided to do a global find and replace. Using Find and replace in files in RoboHelp, I replaced each of these tags with nothing (i.e., a null value, essentially deleting them). Searching for the entire string didn't detect all instances, so I searched again for "rh-align" only and found about 50 instances, which I manually corrected in the HTML source.
    So far, so good!
    I didn't try the options you suggested, but I was suspecting a template problem as well. Thank God it wasn't because I wasn't relishing the prospect of tracking that down.
    And yes! We tried your macros. Actually, the world-class tech writer Sue McKinney, who works with me, tried it, and she says it took three minutes to reformat the rows in the tables so they wouldn't break, which is a requirement of ours. We look forward to implementing the other table-related macro functionality you developed. Thanks for providing it for our use!

  • Jitter problem after burning DVD from avi or mpeg2 that was exported from original timeline edit

    When burning a DVD directly from the timeline in Elements 7, there is usually no problem, however, when first exporting it to an .avi or .mpeg2 file, and then putting that new file back into the timeline, and then burning that new file to a DVD, there is jitter or "strobing" when the subject in the video moves (when playing the DVD).
    It's not an install, or re-install issue, because before I started with this new computer, the exact same thing happened with the last computer I was using.
    Thanks.

    Les,
    I do not know the newer Pinnacle Studio products, but going back to 8 and 9, through 9.4.3, the workflow was based on DV-AVI, just like PrE is. Pinnacle might have changed over to MPEG-2 in later versions, but I just do not know, as I have not seen a version, since Studio 10 hit was such a disaster.
    One of the problems when working from DVD-Video material is that it has already been compressed to MPEG-2, loosing a good bit of data, and also converting the material to GOP (Group of Pictures), so that individual Frames are not present any longer. This precludes Frame-accurate editing, unless that compressed material is converted to all I-frame. See this ARTICLE for some background on GOP. Then, upon Burn to Disk, that I-frame material is once more compressed (again) to MPEG-2 and GOP for use in a VOB container. This WILL cause degradation of the image, most noticeable where there is motion, either subject, or camera motion. Some NLE's offer what is referred to as "Smart Rendering." This can help in some areas. For portions of the footage, where no changes have been made, beyond just cuts, the material will NOT be Transcoded again to MPEG-2, but will be used, as-is. Note: add a Transition, or a Title, or a PiP, or any Effect, and that footage WILL be Transcoded, so the Smart Rendering aspect will be moot. Sony's Vegas has been recommended for Smart Rendering, but I have never used it. This might be worth investigating. Also, if Pinnacle Studio is working fine, you might want to consider using that program. I have 5 different NLE's on my workstation, and use each for specialized situations, though the vast majority of my editing is done in PrPro.
    Regarding the existing DVD-Videos, much depends of the source. PrE can Import and work with 100% DVD-compliant (very important) VOB's. Unfortunately, most DVR's do not create 100% DVD-compliant discs. This is most often manifested in the first VOB, which will contain any Menus and navigation. This ARTICLE will give you some background on VOB's, which are Video Object "containers."
    As you point out, there can be issues with the resulting MPEG-2, as it will span part of VOB 1, and then all remaining VOB's. With 100% DVD-compliant VOB's, there will be a perfect flow in the MPEG-2 that spans the multiple VOB's. When the VOB's are not 100% DVD-compliant, issues can arise.
    Considering your DVR, it is likely that ripping is going to be the best workflow, as that will strip out the other material in the first VOB and should then gather the data for the spanned MPEG-2. The ultimate rip will be to a DV-AVI Type II file w/ 48KHz 16-bit PCM/WAV Audio. This is an older FAQ Entry from the Encore Forum, on ripping, but might have some useful tips. Note: this was for getting material from a DVD-Video for authoring to a new DVD in Encore, and not editing.
    For non-commercial DVD-Video editing, I will use an A-D bridge and my DVD deck, and capture to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio, and Import the resulting files into PrPro/PrE. This is exactly the same workflow that I use, with analog material, like VHS.
    Also note that PrPro, a US$900 program did not get VOB Importing until CS4.2 (current version), while PrE has had it for some time now. Also, PrPro is a DV-AVI-based, I-frame, program, just like PrE, so no "Smart Rendering" there either. Same exact issues exist in "big-brother," PrPro.
    Most of all, good luck,
    Hunt

  • Problems importing .mov video from a zoom q3HD shot at 1280x720, H.264

    FCP wont allow me to import my file. I use the zoom q3HD and shot @ 1280 x 720.
    The codecs are h.264, Linear PCM.
    Can anyone help me.
    I was told first I have to convert to PRO RES to edit as h.264 is bad for this...
    any help would be huge!
    Its a wedding.
    Thanks

    Specifically, the file is 1280 x 720- Dimensions
    Codecs: H.264, Linear PCM
    2 audio channels
    60 Frames per second
    .MOV
    I was able to load directly from the same camera without a problem :
    1920 x 1080
    H.2c4, Linear PCM
    2 audio channels
    30 frames per second.
    .MOV
    So, i guess the camera is supported but just not at 60 frames per second settings? ? ?
    any good conversion ideas? and why the highest hd setting imports ok?

  • Problem with movie purchased from iTunes

    I purchased 2 movies over the computer from iTunes and tried to sync them on my iPad 2.  The first synced fine.  The second says it is syncing but will not display on the list of movies on my iPad. I have tried to repurchase it directly from my iPad but iTunes won't let me.  The movie shows on the list of movies on the computer.  Tried to play it from the computer and it locks up the video after 10 minutes and audio continues.  Any ideas??

    iTunes Store let me re-download and all is ok now.

  • Why the Move from /opt to /usr ?

    I'd been getting used to having my DE stuff in /opt.  Then, all of a sudden, Xfce is in /usr.  Not that I mind one way or another, but it did throw me for a loop:
    As soon as I installed and started x, my whole Xfce panel setup disappeared.  I'm using:
    exec xfce4-session
    Xfce loaded without any panels. The Settings > Panel Manager wouldn't even start.
    I created a new user and copied my .xinitrc to the new /home/user, then started x.  This time Xfce ran great (again).  So to make this happen for my user, I backed-up most of the hidden files in my user's home with 'mv' and started x again.  So far so good, the default panels and Xfce in all it's glory come up fine.
    Then I switched the icon theme to Tango, and spent an hour putting all my panels back the way I like them.
    The panels themselves are working fine, but I'm missing icons that I wasn't missing before.  For example, the Xfce notes plugin has no icon.
    I found all the '.desktop' files for the panel plugins in:
    /usr/share/xfce4/panel-plugins
    Why they aren't with /usr/share/applications is beyond me.
    Now, after a few hours performing my Xfce rescue, I'm ready to fix things.  New icon theme would probably avoid pacman upgrades breaking everything, but that's a lot of work even if using existing icons.  Editing the .desktop files is fast, but not at all effective if another pacman upgrade moves their location in the filesystem again (and I'm not sure I should use pacman to block portions of upgrades).
    Well, on to the icon theme I guess.  If I just copy Tango and create a few more symlinks within it, maybe some of icon names the Xfce .desktop files reference will be found.

    Good riddance to /opt, I say.
    well, not totally, as things like java and openoffice have this kind of hier:
    $ ls /opt/java/
    COPYRIGHT README_ja.html bin include man
    LICENSE README_zh_CN.html db jre sample
    README.html THIRDPARTYLICENSEREADME.txt demo lib
    $ ls /opt/openoffice/
    LICENSE README.html licenses readmes
    LICENSE.html THIRDPARTYLICENSEREADME.html presets share
    README help program
    $ ls /opt/eclipse/
    about.html eclipse.ini icon.xpm plugins
    configuration epl-v10.html libcairo-swt.so startup.jar
    eclipse features notice.html
    so really, I don't think they can integrate with FHS without some shitty workaround (see how gentoo installs eclipse in /usr, roughly they just drop it in /usr/lib/eclipse3.2 and symlink binary to /usr/bin). and I think /opt is really the place for this kind of things.
    The reason things are currently installed to /opt is because they, at one time or another, broke the FHS.
    Here's another huge thing: quite a lot of work goes into making sure gnome apps know that gnome is not in /usr (same with KDE, et al).  In addition, new users often yell and scream when they need to log out after an initial install to /opt (profile.d scripts).
    as a software dev, I always had that feeling of out-of-place weirdness about gnome/xfce/kde in /opt, but thought 'hey, that's just me'. now I get it:  that implies more dev work, and more work always implies more potential issues. so dev-wise, it's wrong.
    plus now, all things being in /etc it makes it a snap to backup config files.
    what's more, I don't get how the fact that an app is called 'self-contained' changes anything. it's not like we're on a mac or windows and you copy it to some other directory or computer and expect it to work... as for /etc being crowded, the move really didn't add much to it...
    and really, I like FHS, where files are separated by their role, not their belonging app.

  • Consult Transfer problem after CCM upgrade from 3.3.4 to 4.1.3

    I upgraded a CCM Cluster installed into a main site. In addition there is a branch office WAN connected by an MPLS Link with the main site; the branch is connected to PSTN using a Voice Gateway H323. The upgrade was perfomed from 3.3.4.sr2 to 4.1.3sr3a.
    Now there are problems with consult transfer only on the branch office; main site don't is affected by the problem.
    It's really strange because it occurs for 50% of the time, sometimes it works fine ..
    To better explain the problem:
    when a user receive a call from PSTN or from another phone (into same region or remote) and want to transfer to another collegue he press "transfer softkey", talk with the collegue and when he try to transfer the call "transfer softkey" appear disabled. If he transfer the call without consult the call is transferred correctly.
    Later I have unistalled the 4.1.3 sr3a and installed 4.1.3 sr2 but nothing is changed
    Someone can help me ?

    Hi Brent,
    Do you perhaps have "on hook" transfer enabled? With this enabled you don't need to press the Transfer key a second time to complete the transfer.Have a look:
    •When on-hook transfer is enabled, you can either hang up or press Trnsfer, then hang up.
    •If on-hook transfer is not enabled on your phone, be aware that hanging up instead of pressing Trnsfer cancels the transfer action and places the party to be transferred on hold.
    Onhook Call Transfer
    Modifications to the Call Transfer feature add the onhook (hangup) action as a possible last step to complete a call transfer. The Transfer On-hook Enabled service parameter, which enables onhook call transfer, must be set to True for onhook call transfer to succeed. If the service parameter is set to False, the onhook action ends the secondary call to the third party.
    In the existing implementation, if user B has an active call on a particular line (from user A) and user B has not reached the maximum number of calls on this line, the Cisco IP Phone provides a Transfer softkey to user B. If user B presses the Transfer softkey (or Transfer button, if available) once, user B receives dial tone and can make a secondary call: user B dials the number of a third party (user C). Cisco CallManager provides a Transfer softkey to user B again. If user B presses the Transfer softkey again (or Transfer button, if available), the transfer operation completes.
    With the new onhook call transfer implementation, user B can hang up after dialing user C's number, and the transfer completes. Both the existing and new implementations work in both the case of a blind transfer (user B disconnects before user C answers) and also in the case of a consult transfer (user B waits for user C to answer and announces the call from user A).
    The previous implementation remains unchanged: user B can press the Transfer softkey twice to complete the transfer.
    From this doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edb46.html#wp1088627
    Hope this helps!
    Rob
    Please remember to rate helpful posts...........

  • Nis problems after recommended patchset from 20 July 2007; xconfig problems

    I would like to bring the following to the attention of solaris developers :
    After I updated 38 cluster nodes, Solaris 10 x86, to the recommended patchset from July 20 2007, I get ypbind problems. As they are 650 systems all being clients to the same NIS server, of which 38 on that patchset and and 290 on a slightly older one, I cannot believe that the NIS server would not respond. The NIS problem started from Monday when I had updated these 38 nodes. My 329 x86 systems are all on Generic_125101-10.
    I have had the same occurence on two different systems.
    I have not yet further investigated which patch could have been the cause, but I will have
    to find it, as the cluster is not workable this way.
    On the same 38 nodes, on which I did a multiuser update and then rebooted, I had
    to run an xconfiguration by hand before the systems fully rebooted. The systems have been configured to go to /dev/console and no xconfiguration should happen. Afterall to do
    interactive work on 329 systems would be very time consuming.
    This did no happen on the recommended patchset of 29/June.

    I actually forgot to describe the system, so that the significance of this failure becomes
    clear:
    the NIS server serves ~700 systems. None of the other systems showed a failure
    to communicate with the NIS server during the period where this new incidence happened.
    The failure to communicate is solid, reporting ever 15 seconds or so.
    On the reboot of the system, the system is again immediately able to communicate with the
    NIS server.

Maybe you are looking for