No batches/stocks were found - determination is performed online MFBF

Hi Gurus,
Can anybody please help me why we are getting this message in MFBF.
When the user is trying to turn in production for material A in MFBF, and when they hit post with correction in the home screen of MFBF, in the next screen the system gives a message "No batches/stocks were found - (Batch) determination is performed online" . In this screen we have the component B under the material A which was entered in the first screen. Part B is batch managed, and there are batches also in the system, but the system is not automatically picking up the batches for part B. Why is this happening?
Thanks
Anusha

dear Anusha
please look here:
http://help.sap.com/saphelp_47x200/helpdata/en/25/283aac4f7811d18a150000e816ae6e/frameset.htm
focus your attention into Production (PP/PP-PI) -  Batch Determination in Production/Manufacturing
just click on that link

Similar Messages

  • No batches/stocks were found (Batch) determination is performed online erro

    Hi Gurus,
    Can anybody please help me with this. When the user is trying to turn in production for material A in MFBF, and when they hit post with backflush, the system gives a message No batches/stocks were found - (Batch) determination is performed online in the next screen. In this screen we have the component B under the materia lA which was entered in the first screen. Part B is batch managed, and there are batched also in the system, but the dettermination is not occuring.
    Thanks
    Anusha

    dear Anusha
    please look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/25/283aac4f7811d18a150000e816ae6e/frameset.htm
    focus your attention into Production (PP/PP-PI) -  Batch Determination in Production/Manufacturing
    just click on that link

  • Trusted certificates from your previous version of Adobe Reader were found.

    After upgrading Adobe Reader from 10 to 11, some users are getting "Adobe Reader Security - Trusted certificates from your previous version of Adobe Reader were found.  Would you like to import them."  I need to know what registry settings we can modify to either set this automatically to "Import" or "Use Default"  I need to add one of these options into our Adobe Reader Settings GPO that is using group policy preferences.  This only appears for users who have data in C:\Users\%username%\AppData\Roaming\Adobe\Acrobat\10.0\Security and only the very first time the user opens Adobe Reader after the upgrade per user profile on a given server.

    I'm not sure this is true: "If they don't exist then there is no dialog. " Could be, but I've never heard of it.
    However, acrodata files perform a number of functions for several features, so removing them is unwise. Also, they will just come back when a user exercizes certain features.
    Better to just turn off the feature with the supported preference.
    Ben

  • Batch is not getting determined

    Hi,
    We are facing a serious issue while we create a TO from a Project delivery, batch is not getting determined so automatic confirmatin is also not happening. Please note that we are using Leanwarehouse and the movement type 281 and the special stock is Q. We have also maintained entries in VHC1 batch search strategy.
    Please help me in resolving the issue and let me know in case i need to maintain more settings
    Warm Regards,
    Sridhar b

    I think the problem is the stock catagory.
    "Q" or "S" material is not meant to be picked for out bound delivery, mvmnt type must be specific for Q stock
    try lt03 manual t.o. creation in the forground (entering the source info of the q stock) for the delivery I would expect to see a source bin error "no available stock in bin"
    meaning that SAP does not see "Q" material as available for picking
    Edited by: Arakish on Mar 24, 2010 5:39 PM

  • No OS X system backups were found?

    Hi there,
    I recently did the Mountain Lion -> Mavericks upgrade. Too late I discovered that sync between Outlook 2011 and Mail etc had been removed from Mavericks. That's a whole other story.
    So I decided that I'd revert back to Mountain Lion from a Time Machine backup so I followed the instructions 'Command R' at startup and followed the bouncing ball only to get the message back "No OS X system backups were found".
    From research it appears that this was a bug first disocvered in Mountain Lion.
    I've been on Mavericks for over a week now and Time Machine backups appear fine in the 'Star Wars' view and a file level recovery works just fine.
    So this morning I decided to see if system backups had corrected itself by restarting and doing Command R etc - nup, same message.
    Anyone else experienced this and found a simple way of resolving the problem? I'm no longer going to revert to Mountain Lion but I would like the piece of mind that I actually have a full backup!
    Cheers,
    Jappas

    This simple procedure will clear your Time Machine settings, including exclusions. The backups won't be affected. If you have a long exclusion list that can't be recreated easily, you may prefer a more complicated procedure that preserves the exclusion list. In that case, ask for instructions. Otherwise, do as follows.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/com.apple.TimeMachine.plist  
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a file selected. Copy the file to the Desktop. Then move it (the original, not the copy) to the Trash. You'll be prompted for your administrator password. Reboot and recreate your settings in the Time Machine preference pane. It will show that you have no backups. Don't worry; your backups haven't been touched. Run a backup to test. The backup may take much longer than usual. If TM now performs as expected, delete the file you copied to the Desktop.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • QA07 - No batches have been found for processing

    Hello,
    I know this topic was discussed many times, but I still don't find solution for my problem.
    I'm getting error "No batches have been found for processing" via QA07.
    I want to move stock from unrestricted to Q-stock after SLED is expired.
    These are my settings:
    MM Data:
    Batch master:
    1.Can you please help me to find the problem?
    2. Do I need to setup a job for QA07 or SAP will move automatically?
    Thanks!

    Hello,
    Did you check this thread Deadline Monitoring ?
    I believe it will help you, there are many information.
    Also, from this thread: Recurring Inspection 09
    "The following conditions are required to have the inspection lot created automatically when the transaction QA07 is executed.
    1) Inspection type '09' should be activated.
    2) Inspection plan with usage '9' should be created.
    3) Total shelf life(TSL) field and inspection interval field should be maintained.
    When the batch is received initially then SLED and Next inspection date(NID) are updated automatically (SLED = Manufacturing date + TSL) and (NID = Manufacturing date + Inspec. Interval). Now one catch here is that SLED always have an edge on Inspection date so Inspection date should always be kept few days lesser then TSL, otherwise as the SLED is reached first stock will be moved to block status without considering settings shown in below screen shot. Can also give the number of days prior to inspection date when the inspection lot be printed by specifying days in initial run in days."
    Kind regards,
    Natália

  • "No photos were found to import"

    This is a recurring problem in LR3.2 (WIN/Vista) for me, and none of the forum answers seem to address what I am experiencing.
    I have a folder on my hard-drive that contains 10 images. Of the 10, 5 are .psd, and 5 are .jpg. Each of the 10 images have unique file names (unique.psd), so there is no stacking involved of like named images here. I select the folder in LR3.2, and it shows 5 of the .psd, and 2 of the .jpg files. I click “Library>Synchronize“ and the Synchronize dialog window opens. It has found 3 new photos to import. The radio button (Import new photos (3) is checked, so I then click the ”Synchronize“ button. The ”Import files at there current location“ bar at the top left shows that the ”Task completed“, then an error pops up stating, ”No photos were found to import“. So no images actually get imported.This has happened to me on many different folders, (at least 6) and each time there are unique images on the hard drive but not imported to LR3.2.
    All of the images are 8 bit, and are found in different folders of my catalog. I have a master file where originals are stored, and then a seperate folder where images are exported for upload. I need to manage the upload folders seperately for my business.
    Any suggestions would be helpful.
    Regards

    I'm getting this too on Nikon raw files, all from a batch of files/folders of a three day shoot in Big Sur. LR3 has decided it doesn't want to import day two folder photos. It does import day 1 & 3 with no problem. I've changed the master folder names to have unique names, sub folder names have been changed. Next on to changing file names (big hassel!)

  • No items to be picked were found

    Hi,
    created an order then a delivery with ref.to order
    Now iam trying to create a transfer order(with ref.) but the system says no items to be picked were found....i checked the delivery (tab page:picking) where it says:
    Overall picking status : A (not yet picked)
    Overall WM status : blank (No WM trns.ord. reqd)
    wat do i do ?it is not a text item too.
    thnx in advance.

    Hi Haseeb
    This would be a customising problem
    If the item is not relevant for warehouse management VBUP-LVSTA = ' ', then you will not be able to pick it
    using a transfer order but instead it has to be done manually in the picking TAB of the delivery.
    It is the customising in the enterprise structure that determines whether or not an item is relevant for WM.
    Menu path SPRO > IMG > ENTERPRISE STRUCTURE > ASSIGNMENT > LOGISTICS EXECUTION > Assign warehouse number to plant/storage location.
    In this case the combination of Plant and storage location you are finding in this delivery does not have
    a warehouse number assigned to it in the customising above. Perhaps you have the wrong storage location in the
    delivery, if you change it to one that has a Warehouse assignment then you should be able to create a TO
    Hope this helps
    Rgds
    Brian

  • "No importable cards were found error."

    Operating v.10.8.3. Using contacts to import a .vcf (v. 2.1) file, sent to the download folder.  Done it dozens of times before, prior to v.10.8.3.  In the past, no problems. Now I get the "No importable cards were found error." Have tested it with 6 different .vcf downlaods, all v.2.1...same error message.  Any suggestions?

    No problems editing and saving data in Contacts.  Just ran a new test 30 seconds before writing this.  Also, no problem exporting .vcf files...works like a charm.  Just can't import them.  I know the error message is a known issue, which goes back to at least 2007, but it has exhibited itself under varying circumstances, mostly dealing with batch operations, which have resulted in varying solutions.  However, none of those seem appropriate to my situation and could actually make matters worse (data corruption or deletion), rather than better.  Good questions, though.  I am just out of ideas, after much reading and implementing the more sane options, nothing seems to resolve the issue.

  • No packages applicable to your system were found after service?

    Hello
    I got my system back from Lenovo a week ago after getting some service done.  As far as I know the motherboard was not replaced but I cannot get any system updates.  I did a restore to the factory default system and I cannot get any updates for a week now, only the message: No packages applicable to your system were found.  In the recovery menu my system is listed as INVACTO and the serial number is blank.  The bottom of my system lists product ID 2746CTO.  I do not remember if the serial number was blank before I sent it in but it is now.  ThinkVantage toolbox also lists product: INVACTO, serial: blank, and warranty: Could not be determined.  Could my serial number had been erased and my system model changed while it was at Lenovo?  Could this be the reason I'm getting no updates?
    Thanks in advance for any help.
    John

    Hi,
    open registry and Check the following registry keys (or similar)
    HKLM\HARDWARE\ACPI\DSDT\LENOVO\
    HKLM\HARDWARE\ACPI\FADT\LENOVO\
    HKLM\HARDWARE\ACPI\RSDT\LENOVO\
    They should be in the form of your model number without the hyphen and not TP-xx___
    it worked with my R61 8919Y16
    Also check following registry too:
    HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\System Update\Preferences\UCSettings\RunTime
    whether the key called "MTM" contains your full MTM number.
    Let me know, how does the registry looks by you.
    You can also check following tests, that will show you the MTM, that is detected by System Update:
    Go to :
    %ProgramFiles%\Lenovo\System Update\egather\
    - start the "IA.exe" and a new .xml file will be created. The name of this file will contain the MTM of your system, that is detected.
    Cheers

  • No characteristics were found

    Hi Experts,
    Can anybody please help me,
    I have confirmed production order operation wise. Stock post to Quality inspection stock.Now I want to do result recording & Usage dicision in QA32. But system shows error No characteristics were found
    Now I have maintain characteristics for operation. So how I can do RR & UD.

    Dear Sir,
    Thanks for quick reply.
    I enter Inspection lot in QAC3.when I goto enter system throw following error.
    You have already recorded confirmations for the insp. lot
    Message no. QA071
    Diagnosis
    You have already made a completion confirmation for the QM order that is assigned to the inspection lot
    System Response
    You cannot cancel the sample calculation for the inspection lot.
    Now I have cancle confirmation for order.
    Edited by: Raja S on Dec 24, 2008 11:41 AM
    Edited by: Raja S on Dec 24, 2008 11:42 AM

  • CHANGE ASSISTANT : Failed.   No Environments were found in the Environment

    Hi all,
    Iam trying to apply MP5 on HRMS 9.1 peopletools 8.52 in change assistant getting error as
    *(Step 5) Discovering Hub Environments.*
    Failed.   No Environments were found in the Environment Management Hub.
    Note: All agents should be running and sending pulses for all Application,
    Batch, File and Web Servers for the environment before Change Assistant is started.
    *(Step 6) Pinging Metalink*
    Failed.
    *(Step 7) Pinging Update Gateway*
    Failed.
    *[Mon Dec 10 20:04:29 IST 2012] End Validation*
    Unsuccessful completion (3 Steps Failed).  Click on View Log to see additional messages.
    I have set crawl path correctly, ping is working fine , hub url is also showing agent , change asiistant RUNNING
    pls help
    thanx
    Arvind

    this is what the log file shows...
    unable to find help with the post you hav directed Hakan.....
    Help me...
    [Tue Dec 11 12:02:53 IST 2012] Begin Validation
    output written to: C:\Program Files\PeopleSoft\Change Assistant\validate\validate_2012_12_11_12_2.log
    (Step 1) Creating a Summary of Your Environment
    PS_HOME: F:\PS_HOME\
    Output Directory: D:\change_assistant\output\
    Staging Directory: D:\change_assistant\staging\
    Path: C:\Program Files\PeopleSoft\Change Assistant\jre\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;F:\PS_HOME\bin\client\winx86;C:\Program Files\PeopleSoft\Change Impact Analyzer\dll;D:\ORACLE\product\11.2.0\dbhome_1\bin;F:\ORACLE\product\11.2.0\dbhome_1\bin;F:\app\299025\product\11.2.0\dbhome_1\bin;D:\apps\299025\product\11.2.0\dbhome_1\bin;D:\app\299025\product\11.2.0\dbhome_1\bin;D:\Oracle_Home\product\11.2.0\dbhome_1\bin;C:\Program Files\CA\SC\CAWIN\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Intel\DMIX;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;C:\Program Files\TortoiseSVN\bin;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\bin;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\jre\bin\server;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\jre\bin
    CLASSPATH: C:\Program Files\PeopleSoft\Change Assistant\changeassistant.jar;C:\Program Files\PeopleSoft\Change Assistant\mx4j-jmx.jar;C:\Program Files\PeopleSoft\Change Assistant\xercesImpl.jar;C:\Program Files\PeopleSoft\Change Assistant\xml-apis.jar;C:\Program Files\PeopleSoft\Change Assistant\xalan_2_7_0.jar;C:\Program Files\PeopleSoft\Change Assistant\serializer.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-logging-1.0.1.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-httpclient-3.1.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-net-ftp-2.0.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-codec-1.2.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-api-20021118.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-common.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-xupdate-20040205.jar;C:\Program Files\PeopleSoft\Change Assistant\xindice-1.1b5-dev.jar;C:\Program Files\PeopleSoft\Change Assistant\psemf.jar;C:\Program Files\PeopleSoft\Change Assistant\psjoa.jar;C:\Program Files\PeopleSoft\Change Assistant\AbsoluteLayout.jar;C:\Program Files\PeopleSoft\Change Assistant\log4j-1.2.8.jar;C:\Program Files\PeopleSoft\Change Assistant\jxl.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-io-1.4.jar;C:\Program Files\PeopleSoft\Change Assistant\jewt4.jar;C:\Program Files\PeopleSoft\Change Assistant\share.jar;C:\Program Files\PeopleSoft\Change Assistant\j2ee.jar
    Current Working Directory: C:\Program Files\PeopleSoft\Change Assistant
    Done.
    (Step 2) Validating your SQL Query Tools
    Found Oracle SQL Query Tool at d:\miscc\Oracle_Home\product\11.2.0\dbhome_1\bin\sqlplus.exe
    Done. 1 SQL Query Tool found.
    (Step 3) Pinging Environment Management Hub
    Pinging 172.17.108.118
    thanx
    Arvind.

  • TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

    Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen  and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine.  My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's.  On the non-working Ipods, the  Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
    any help is appreciated. Chris4sail

    Hello there, chris4sail.
    The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

  • When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

    When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

    jtcollins wrote:
    if iMovie is open, connect your iPhone to comp. iMovie '11 will now find your phone and look for videos as it would if camera was connected
    (Underline is my emphasis)    
    Hi jt - Alex was actually referring to video clips in iPhoto not appearing in the item "iPhoto Videos" in the Events Library in iMovie - thanks for your post though (the 2 words are very similar).
    John

Maybe you are looking for