No Boot: Flashing Question Mark Folder

So I have had this problem before and took it to the apple store, where they fixed it, but now the problem is back again.
When I try to start up the machine, all I get is a folder with a flashing question mark in the middle, as though it does not detect my hard drive.
When I book into the OSX Install DVD, and go to Disk Utility, it does not see the hard drive.
The problem happens when my osx freezes, and I do a hard-shutdown.
I took it to the apple store once, and they fixed it, without losing any data, but I do not want to go back to them, as that takes time out of my day.
Is there anything I can do to fix the issue myself?

Hi nxd,
Welcome to Apple Discussions.
It definitely sounds a bit more serious this time. I'd imagine that last time they just reinstalled the OS and had you on your way. The folder with the question mark indicates that the startup sequence can't find an appropriate boot volume (your HD). From my experience this means one of two things and more often the latter:
1.) Somehow the OS was corrupted and an archive & install is necessary to restore order
2.) The HD has failed and requires either a repartition (followed by an install) or the drive itself has failed and requires a replacement.
The fact that you can't see your HD in Disk Utility off the restore disc is not a good indication. If the OS needed to be reinstalled you'd see the HD here, at the very minimum. The good news, I suppose, is that you can at least boot off the restore disk. I've seen many a failed/failing HDs prevent the system bus from evening reading the optical drive.
With all this being said, I'd really recommend getting the machine to an Authorized Service Center (or Apple Store) and have them take a look at things. The HD may require replacement, which would also result in the very high potential for data loss.

Similar Messages

G4 17' won't boot, flashing question mark folder with complications

I'm editing a final cut pro project, due to air on friday at noon and during conversion in compressor to dvd format, final cut quits then the computer freezes up. On a hard restart I get the flashing question mark folder.... i know what that means
I was able to boot up after a couple of tries from the os 10.4 (tiger) cd and the hard drive shows up but disk utility can't make the repair. This is the error i get:
booted with the tiger os cd and got to the disk utility. the hard drive does show up with some generic-y looking name. I try to repair the disk and get this error (in red):
Invalid node structure
Volume check failed.
Error: The underlying task reported failure on exit
then it says:
1 volume could not be repaired because of an error
g4 powerbook 17" Mac OS X (10.4.9)
so then i get the bright idea that i will change the startup disk to network drive and try to start from another drive on the network. it tries to find it then goes back to the flashing question mark. I've restarted holding the c key down with the tiger cd back in there and it is spinning but it never reads it.
any ideas? I REALLY need to salvage this film if possible.
thanks!!!!!
donna
Has anyone seen this before? What is my next step--short of erasing the drive. i really need to get this project off.
thanks in advance for any and all help!!!!!
g4 powerbook 17" Mac OS X (10.4.9)

i'd try disk warrior except that i cant get it to boot from ANY cd right now EXCEPT apple hardware test. and i have NO idea what to do with that.
I've tried booting in option mode and all i get is the little restart button and the forward arrow button but NO drive options
it won't pick up my other laptop in target mode
i've even put in Norton Utilites 8.x and it won't boot up from that either.
i've zapped the pram--nothing
know of any other boot tricks or shortcuts?
donna

IMac won't boot - flashing question mark folder

Hi, I was having performance issues with my iMac, so after searching for a resolution, I followed some suggestions to reset the PRAM and SMC....after resetting the PRAM it will not boot up at all! The startup sound chimes, then a blank grey screen briefly before a flashing question mark folder appears. Nothing happens..... I have the install cd, but there is a CD in the drive and I can't get it out. Help!!
Thanks in advance....
Andrea

HI Andrea,
To get the disk to eject, start the iMac while holding down the mouse button.
A flashing question mark appears when you start your Mac
Try booting while holding down the Option key.
Carolyn

IMac will not boot - flashing question mark folder

Hi Everyone,
This evening I did the update for Xcode on my iMac (purchased in 2012, new one with no DVD drive). I attempted to restart the iMac and the folder with the question mark inside it started flashing and would not stop.
I have launced Internet Recovery with Disk Utility and verified the disk, and the result was "The disk appears to be OK", (this filled me with hope...). I selected the Startup Disk and I got the same result. I removed all the external peripherals and that did not solve the problem. I don't have a Time Machine backup of this Mac as it failed every time I tried to run it to my NAS drive. I have all of my iPhone app work on this iMac and don't really want to wipe my HDD. I have tried everything I can see that the forums and Google suggest... does anyone have any ideas?
Thanks in advance
Ed
P.S. Disk Utility showed all available space as over 400 gigabytes... so I am pretty certain that it is not a disk space error.

If you have a USB full installer, then you can boot from it by holding the alt key at startup and selecting the usb. Once it loads, you'll be presented with a menu allowing you to select (reinstall the OS). This will then allow you to select (Macintosh HD). It will reinstall the OS without prompting you to run setup assistent or anything like that. You'll just reboot into the login screen.
You're on OS 10.8.5. You'll need a full copy of 10.8.5 (it's almost 5GB) restored to a 8GB usb.
You can do internet recovery. It's like having a full installer but the files are downloaded from the internet. When you used internet recovery to check your disk, there should have been an option to reinstall the OS as well. It is doing the same thing via the internet that I described using a USB.

How do I fix the GRAY boot-up screen with FLASHING QUESTION-mark FOLDER?

When I turn on the MacBook Pro laptop, I opened up the Safari Browser and its when the problem started. It was stuck on an loading infinite loop. I decided to force quit the application and/or turn off the mac by the Menu options, It did not work. So I did a "Hard" Shut-down and restarted the Mac, the Boot up screen stood gray for like a minute until the Flashing ? Folder icon showed up!.
My sister's laptop's warranty is expired so I wonder how can I fix it without having to spend too much money on a simple troubleshooting tip.
How can I download/create a boot-up Disk/Flash Drive so I can reset it to factory settings?
I cannot access the laptop because It's kind-of software bricked if you ask me. Also, I do not know how to check the Mac OS version outside of the "About Mac" menu. I do have another Mac which is a desktop computer with a CD drive.
I would appreciate some expertise on this issue a.s.a.p. Thank you!

Ok, now I am stuck:
Why does my Mac boot its OS from the Flash Drive instead of the INTERNAL HARD DRIVE???a
If I start up my MacBook Pro, It will have the flashing question mark folder UNLESS i plug in the OS-Boot flash drive. When I at the desktop screen and work on a program, When I unplug the Flash drive, THE OS WILL CRASH AS IF I TOOK it's soul (OS x Lion) out of the body (MacBook Pro Laptop)
this is frustrating because when I did the INTERNET RECOVERY, When I install OS x Lion, the Flash Drive only show up as an option as opposed to the HDD.
I cannot format the hard-drive in DISK UTILITY because it's grayed out. This is just frustating. I never had problems with PC Windows OS recovery but this (Mac OS).

Mac mini (late 2012) when booting shows flashing question mark folder

Hello, so after installing software update to my mac mini *late 2012* it froze for few mins so then I rebooted it and now it wont boot it shows flashing question mark folder, I can't use the boot buttons because it asks me for a frimware password and I dont remember setting one up so how can I fix it .

If you need to reset the firmware PW see:
http://reviews.cnet.com/8301-13727_7-57542601-263/efi-firmware-protection-locks- down-newer-macs/

Boots to flashing question mark folder and disc utility cannot locate internal hard drive

Bottling my MacBook Pro I end up with a flashing question mark folder. I reboot holding the option key to select discs and there were no options at all. I plug in an Ethernet cable and it shows a internet recovery option. I click and it downloaded a temporary recovery mode. From there I open disc utility but it doesn't find any internal hard drives. I reset the pram and I still get the flashing question mark folder. Thinking it was my internal hard drive that failed I bought and replaced the internal hd with a new one and repeated all the processes and still no internal hard drive was found. I'm stuck with the flashing question mark folder. Therefore I've concluded that it was my MacBook pros internal hard drive CABLE that had failed. Does anyone know of any other possible problems that is causing this for my MacBook Pro or know of any solutions? Or is replacing my internal hd cable the only solution? Please help!

It was the internal HD cable. I replaced it and now my MacBook Pro works

Flashing Question Mark Folder on Start-up

I recently starting having administration issues with my Mac Mini.
I went to update to OS 10.5.7 and when the administrator box came up asking for my password, my name was missing. After putting in the correct information, was unable to update, but received the message what my clue to password was.
Anyway, I performed a safe startup, changed the password and tried again. Same issue as before. So I started up from the Start Up Disk, and ran Disk Utilities and verified the disk and repaired any permission issues. When I started up my Mac Mini from the hard drive, I still did not have my administrator password working.
At this point, the start-up ping is gone.
I reset the Pram and had the same issue. So, I saved all important files to an external hard drive and tried to do a clean install. I was unable to do the clean install.
I removed the hard drive from my Mac Mini and installed it into a friends Mac Mini. I had complete control of my computer with no administrator password issues, the ping was there, and I could reload all saved items and still not have any issue no matter how I started up the computer. I then performed a complete erase and reinstall and still had no problems.
I reinstalled the hard drive into my Mac Mini, and I now have the Flashing Question Mark Folder with gray screen on start-up and no ping. Can't fire wire to start up, can't clone, can't start-up from disk, safe mode, etc..
Any ideas would be helpful. Most likely I will be going to the Apple Store and seeing what they can do.

generally, the flashing folder mark means it can not find the startup drive.
if you hear those kind of noises your hard drive is most likely dead. while this is almost certainly true you can try booting from the install DVD and see if the drive is visible in disk utility. if you can't insert the DVD try this. reboot and hold option at the chime. this should boot you into startup drive manager. there you should be able to insert the DVd and choose it as the startup drive. boot from the DVd and once past the language screen start disk utility from the Utilities menu at the top. see if it detects the internal drive. if it does, try repairing it. if it doesn't the drive is dead.

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Persistent Flashing Question Mark Folder Icon, after Repair & Rebuild-THX!

Hello All,
Thank you in advance for any insights.
For the past week, one/two days after a force re-boot, my Quicksilver Mac (OSX 10.4.11 and OS 9 Classic) starts up with the dreaded flashing question mark folder.
The start up disk has always been on "Mac OS X, 10.4.11 on main stuff" ("main stuff" is the name of the hard drive.)
The first time, I ran DiskWarrior and rebuilt the hard drive, which is kind of new as it was replaced in April 2009. Then I ran OnyX and got a clean bill of health. The Mac was shut down at the end of the day as is my habit via turning off the power strip.
If it helps, here's part of the DiskWarrior report:
• 13 files had a directory entry with an incorrect text encoding value that was repaired.
• 340 files had a damaged extended attribute that was repaired.
• 3 folders had a directory entry with an incorrect custom icon flag that was repaired.
• Incorrect values in the Volume Information were repaired.
Disk Information:
Files: 370,719
Folders: 85,161
Free Space: 92.55 GB
Format: Mac OS Extended (Journaled)
Block Size: 4 K
Disk Sectors: 268,171,472
Media: WDC WD5000AAKB-00H8A0
The next day, the flashing question mark folder reappeared. This time I used the original system installer CD (labeled Power Mac G4 OS X Install). Disk Utility made its repairs. And this time, the computer was put to sleep instead.
In the morning, it woke up, the wireless optical mouse worked for a few seconds, the hard drive is humming along then all of a sudden the arrow (mouse) froze and none of the keys on the keyboard functioned.
After some research, I deleted the energy saver preference (powermanager.list?) and ran Disk Utility again. And again, I shut down b/c I wasn't going to use the Mac for a day or two.
This afternoon, the pesky icon reappeared at start up. At first Disk Utility didn't see the hard drive then I restarted and the hard drive was selectable though not mounted. It was repaired and verified yet once again. Btw, when I did hard drive test, the message says something to the effect that it appears to be working properly.
My question is, might anyone know what's wrong? I've been backing up after every use and I have a laptop. But I love working on the desktop and if this issue can be fixed, that would be perfect.
As an aside, I've read that I should do a clean install. Would doing a clean install mean I need to re-install OS 9 as well as all other all other software programs-Adobe Creative Suite, Quickbooks, Verizon DSL, printer drivers etc.?
One final question, can I continue to boot up from the CD, repair then restart or will I damage the computer? Once it restart, everything seems to work normally and well.
Many, many thanks for reading and any help would be greatly appreciated!
Have a wonderful weekend.
Sam

Disk damage can also affect the startup sequence, but I think what you have already done should have repaired any disk damage, or given you more information.
Once you have ruled out Disk damage, you get the flashing question mark when your Mac cannot find:
• the preferred operating System
• of the preferred version
• on the preferred startup drive.
All these items are stored in the parameter RAM, backed up by a 3.6 volt, non-recharging 1/2-AA size battery that lasts three years or so, unless you turn off all power at night.
If you cannot remember when you last changed that battery, now is a good time. Be sure to reset the PMU/PRAM after installing the new battery.
Message was edited by: Grant Bennet-Alder

Flashing question mark folder on macbook pro startup. PLEASE HELP

I have a MacBook Pro which I think is a 2011 version. When I startup the computer it comes up with the flashing question mark folder. I can't start it up via disc as I do not have the disc that came with the mac :( .

Di you try restarting and booting whilst holding down the command and R keys? Or even the command, option and R keys (assuming that you've a 2011 model)?
Some 2011 models came with discs as they shipped with Snow Leopard. Those that shipped with Lion had no discs. If your machine originally shipped with Snow Leopard, you can call Apple, with the serial number of your MBP handy, and order a set of model-specific discs (cost is, I believe, around $25 with taxes and shipping).
Please 'call back' and let us know if you've tried booting either to your Recovery partition or to Internet Recovery.
Clinton

Flashing Question Mark Folder... with a twist

Hi all, I hope you can help me out.
A month ago I had some trouble with my MacBook. It would continually freeze, then when I restarted it would show the flashing question mark folder icon. When I booted from the OSX CD it couldn't see any drives to install to. Restting the PRAM eventually fixed the issue, but only temporarily: it kept doing it and eventually it seemed that the hard drive was well and truly dead.
I took it to my Mac shop and they replaced the hard drive for me as it was still under my Applecare warranty. Things seemed fine for a couple of weeks.
Then it happened again. Now it seems to have skipped the stage where resetting the PRAM would fix things and has gone straight to the signs of a dead hard drive. I find it hard to believe the replacement drive has died after a couple of weeks. Is there some other issue, such as a faulty motherboard, which could be killing hard drives?
My MacBook is a Core 2 Duo 2.0, with 2GB of RAM and 200GB hard drive, running the latest version of OSX.

I had this happen to my MB a few weeks after purchasing it last November. I took it to the Genius Bar at my Apple Store, and the Genius took my HD out to test it, and said that it had completely locked up, and he wasn't able to get it to load on at all, and that it was dead. They sent it away for me, I got it back a couple days later with a brand new HD, and I haven't had a problem since.
My lesson learned: Backup, Backup, Backup!!! I use Apple's Backup App because it came w/ my .Mac account, but there's plenty of other great Backup Apps out there. Have one or more External HDs set up as backups in case anything happens to your internal, and remember a computer is a computer and sometimes they have problems. However, it does sound like Apple invested in a bad lot of HDs. If it's happening to a lot of people, report it to Apple. There may need to be a recall.

Intermittent Flashing Question Mark Folder

I've got a iBook g4 that seems to be having an intermittent problem booting. A few months back on boot it came up with a flashing question mark folder. After trying a few things it finally booted OK. For months all was good; until yesterday. The same thing happened again. I tried to boot from an install CD to run disk utility, but the drive didn't show up. After a few attempts I was able to successfully boot in target disk mode. After that it booted OK again. I noted in the log a number of I/O errors which makes me think the hard drive is starting to fail. Anyone have any other thoughts or suggestions?

It looks like things are getting worse. I ran diagnostics and everything passed. Is there a reasonable way to make sure the hard disk is the problem? It now will boot only rarely; sometimes hanging on a gray apple screen, sometimes showing disk I/O error messages in the upper left corner of the display, sometimes showing the question mark folder, and occasionally booting. Replacing the hard drive is reasonable, but I'd like to have a measure of confidence that will fix the problem.

GSoD, flashing question mark folder

Okay, after reading here a bit the suggestions aren't fixing my particular issue. We have a black MacBook running 10.3.
On boot, the GSoD comes up, and then the flashing question mark folder.
Tried putting in the Install CD and pressing at various times S, C, Apple, Shift, and Option. The Option gives a cursor but nothing else.
Pulled the DIMMS, cleaned off a white dust, and then installed them one at a time. No luck.
Wife had reported slowness during the evenings but she attributed that to me being on my computer.
Thoughts?
Leam

Hi Leam,
Are you sure it's running OS X 10.3? Reason I ask, is because the MacBook was released with 10.4.6 (May 2006). So if it's running Panther then the unit was downgraded. Matter of fact, I don't even think you can put 10.3 on an Intel Mac. Not to mention, OS X 10.3 doesn't offer Rosetta support so you wouldn't be able to install Intel applications on the machine.
Regarding the flashing question mark/folder icon, that's indicative of a missing, bootable OS. Which can translate into some of the following scenarios:
1.) The OS is corrupted and needs to be repaired or reinstalled
2.) The OS cannot be located because the HD is failing or has failed
3.) The HD's connection to the logic board has been lost or damaged and thus a proper boot sequence cannot be performed.
I'm unsure where you read about the "S" key on startup, the "C" key makes sense to try and boot off the disc drive. I take it that didn't actually occur, though?
I've seen scenarios where a HD can lock up the system bus and cause boot issues, like you're experiencing. Basically it prevents the optical drive from being accessed, despite valid startup keyboard commands. If you can't boot normally or off the installation disc, the next scenario would be the following:
1.) Remove the HD from the unit, mount it into an external enclosure and attempt to boot from a CD and repair the external HD.
2.) Bring the unit into a service provider / retail store for further diagnostics.

HT1310 I have a macbook pro about 4 years old. I can't get it to open past the flashing question mark folder. However, I just tried to hold down the option key and the question mark disappeared. Still, nothing...the light is on the screen but nothing e

I have a 4 year old macbook pro and when I turn it on, the screen and fan come on but there is a flashing question mark folder that appears. Nothing beyond that point....help?

There is no installed OS or you have a dead hard drive. Start by booting from the original installer disc that came with the computer or an installer disc that has a later version than the original such as a Snow Leopard DVD. Then you can do this:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

No Boot: Flashing Question Mark Folder

Similar Messages

Maybe you are looking for