No byte[] in WLS 7.0?
Hello,
when reading the "WebLogic Web Services Known Issues" for 7.0 final, I
see that Change Request Number 75663 tells me that
"WebLogic Web services do not correctly handle SOAP arrays of schema types
which map to byte[]."
Does this mean that you can't have a byte[] signature in an EJB, if you
want to expose its interface through SOAP? I recall that this was the
case in 6.1 but it is not in 7.0b. I am dependant on this feature.
Regards,
Mikael
Hi Mikael,
Not to worry :-)
byte[] (which maps to xsd:base64Binary) is definitely supported in WLS 7.0 GA :-)
I have a sample Web Service (which is basically an extract from "The SOAPBuilders
Interoperability Lab
" interoperability test, that is hosted at xmethods), if you need more that "verbal"
verification :-)
Regards,
Mike Wooten
"Mikael Berglund" <[email protected]> wrote:
Hello,
when reading the "WebLogic Web Services Known Issues" for 7.0 final, I
see that Change Request Number 75663 tells me that
"WebLogic Web services do not correctly handle SOAP arrays of schema types
which map to byte[]."
Does this mean that you can't have a byte[] signature in an EJB, if you
want to expose its interface through SOAP? I recall that this was the
case in 6.1 but it is not in 7.0b. I am dependant on this feature.
Regards,
Mikael
Similar Messages
-
JMS sub-deployment targeted to cluster
Hello,
I have read at the Oracle documentation that we can use a sub-deployment within a JMS module targeted only to a single JMS Server. But I have an application that create JMS resources with deploy descriptors (Application modules) and target the sub-deployment to a cluster with two machines, each machine has a JMSServer. It seems to work (I see them on the JNDI tree on both machines). This is the jms.xml:
Do you also use sub-deployment targeted to a cluster or I shouldn't? Thank you in advance ;)
I am using webLogic version 10.3.4.0
<?xml version="1.0" encoding="UTF-8"?>
<wls:weblogic-jms xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-jms"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.1/weblogic-jms.xsd">
<wls:quota name="InboundMessageQuota">
<wls:bytes-maximum>1000000</wls:bytes-maximum>
<wls:messages-maximum>10000</wls:messages-maximum>
</wls:quota>
<!-- Factories -->
<wls:connection-factory name="InboundMessageConnectionFactory">
<wls:sub-deployment-name>InboundMessage</wls:sub-deployment-name>
<wls:jndi-name>jms.InboundMessageConnectionFactory</wls:jndi-name>
<wls:security-params>
<wls:attach-jmsx-user-id>false</wls:attach-jmsx-user-id>
</wls:security-params>
</wls:connection-factory>
<!-- Queue's -->
<wls:uniform-distributed-queue name="InboundMessageQueue">
<wls:sub-deployment-name>InboundMessage</wls:sub-deployment-name>
<wls:delivery-params-overrides>
<wls:delivery-mode>Non-Persistent</wls:delivery-mode>
</wls:delivery-params-overrides>
<wls:delivery-failure-params>
<wls:redelivery-limit>0</wls:redelivery-limit>
</wls:delivery-failure-params>
<wls:jndi-name>jms.InboundMessageQueue</wls:jndi-name>
</wls:uniform-distributed-queue>
</wls:weblogic-jms>Technically, cluster targeting a distributed destination is supported, and it'll work as long as your can be absolutely assured that the cluster will never host additional JMS servers - perhaps from future projects, or due to integrating third party products. Otherwise, your distributed destinations will end up creating instances on JMS servers where they don't belong - a common mistake that can be tough to diagnose and untangle. I highly recommend staying with the best practice of using a subdeployment that references exactly the intended JMS servers. Note that a subdeployment can reference more than one JMS server.
See [url http://download.oracle.com/docs/cd/E17904_01/web.1111/e13738/best_practice.htm#JMSAD455] WL JMS Configuration Best Practices
Hope this helps,
Tom -
Hi
I want configure the log file to show the amount of bytes used for every person in apache tomcat
How can i do this?Usually, this is due to a localization difference in the JVMs. When WLS boots, the .log file should show you some detailed information about the locale it is using, make sure that is consistent across the machines.
-
WLS 10.3.5 Managed server is not starting in Windows 7
Hello there,
I had installed SOA suite 11 and weblogic server 10.3.5. setDomainEnv is setting environment variables like below.
Path
C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\Oracle\instantclient_11_2;C:\Oracle\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\CREDANT\Shield v7.1\;C:\Program Files (x86)\SSH Communications Security\SSH Tectia\SSH Tectia AUX;C:\Program Files (x86)\SSH Communications Security\SSH Tectia\SSH Tectia AUX\Support binaries;C:\Program Files (x86)\SSH Communications Security\SSH Tectia\SSH Tectia Broker;C:\Program Files (x86)\SSH Communications Security\SSH Tectia\SSH Tectia Client;C:\Oracle\Middleware\jdeveloper\ant\bin;C:\Oracle\Middleware\jdk160_24\bin;C:\Oracle\product\10.2.0.1\BIN;C:\Program Files\Java\jre7\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
Classpath
C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Oracle\Middleware\jdk160_24\lib;C:\Oracle\Middleware\jdeveloper\ant\lib;
Now i have given this command in user_domains/../bin folder
startManagedWebLogic.cmd soa_managed_server01 http://suchalam-ws:7002
But the managed server is shutting down. below is the trace from windows7 command prompt.
this server is being started in managed server independence mode in the absence of
the admin server.>
<Aug 30, 2012 1:13:28 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STARTING>
<Aug 30, 2012 1:13:28 AM IST> <Info> <WorkManager> <BEA-002900> <Initializing se
lf-tuning thread pool>
<Aug 30, 2012 1:13:28 AM IST> <Notice> <LoggingService> <BEA-320400> <The log fi
le C:\Oracle\Middleware\user_projects\domains\sudheers_domain\servers\soa_manage
d_server01\logs\soa_managed_server01.log will be rotated. Reopen the log file if
tailing has stopped. This can happen on some platforms like Windows.>
<Aug 30, 2012 1:13:28 AM IST> <Notice> <LoggingService> <BEA-320401> <The log fi
le has been rotated to C:\Oracle\Middleware\user_projects\domains\sudheers_domai
n\servers\soa_managed_server01\logs\soa_managed_server01.log00011. Log messages
will continue to be logged in C:\Oracle\Middleware\user_projects\domains\sudheer
s_domain\servers\soa_managed_server01\logs\soa_managed_server01.log.>
<Aug 30, 2012 1:13:28 AM IST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\Oracle\Middleware\user_projects\domains\sudheers_domain\servers\soa
managedserver01\logs\soa_managed_server01.log is opened. All server side log e
vents will be written to this file.>
Aug 30, 2012 1:13:30 AM oracle.security.jps.internal.common.util.XmlSchemaValida
tionUtil$StrictErrorHandler warning
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation valu
e = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have e
ven number of URI's. Location: line 2 column 272.
<Aug 30, 2012 1:13:39 AM IST> <Notice> <Security> <BEA-090082> <Security initial
izing using security realm myrealm.>
<Aug 30, 2012 1:13:51 AM IST> <Warning> <JTA> <BEA-110503> <The migrator(the Adm
inServer for manual JTA migration policy, or the Singleton Master for automatic
JTA migration policy) is not available. Will skip JTA TRS failback because isStr
ictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS
of soa_managed_server01 has been migrated to backup server and the backup server
is accessing the TLOG of soa_managed_server01. More safety can be achieved by s
etting isStrictOwnershipCheck to [true].>
<Aug 30, 2012 1:13:52 AM IST> <Warning> <Management> <BEA-141277> <The JMX MBean
PlatformMBeanServerUsed attribute is true, but the Platform MBeanServer was cre
ated without the hooks for the WLS security infrastructure. The Platform MBeanSe
rver will NOT be used and Platform MBeans will NOT be available via the WLS Runt
ime or Domain Runtime MBeanServers. This can occur if you have defined Platform
MBeanServer system properties or JVM options (-Dcom.sun.management.jmxremote or
JRockit -XManagement).
To allow the Platform MBeanServer to be used, you must either remove the system
properties/JVM options or start WLS with the following system property:
-Djavax.management.builder.initial=weblogic.management.jmx.mbeanserver.WLSMBean
ServerBuilder
If you want to eliminate this log error and do not need Platform MBeans to be a
vailable via WLS, then set the PlatformMBeanUsed attribute in the JMXMBean to fa
lse.>
<Aug 30, 2012 1:14:01 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STANDBY>
<Aug 30, 2012 1:14:01 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to STARTING>
<Aug 30, 2012 1:14:04 AM IST> <Error> <Deployer> <BEA-149205> <Failed to initial
ize the application 'wsm-pm' due to error weblogic.management.DeploymentExceptio
n: [J2EE:160149]Error while processing library references. Unresolved applicatio
n library references, defined in weblogic-application.xml: [Extension-Name: orac
le.wsm.seedpolicies, Specification-Version: 11.1.1, Implementation-Version: 11.1
.1, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing lib
rary references. Unresolved application library references, defined in weblogic-
application.xml: [Extension-Name: oracle.wsm.seedpolicies, Specification-Version
: 11.1.1, Implementation-Version: 11.1.1, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(
CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.ja
va:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.j
ava:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.jav
a:58)
Truncated. see log file for complete stacktrace
>
<Aug 30, 2012 1:14:04 AM IST> <Notice> <SipServer.Resource> <BEA-332401> <Initia
lizing SipServer Resource with configuration com.bea.wcp.sip.management.descript
or.beans.SipServerBeanImpl>
<Aug 30, 2012 1:14:08 AM IST> <Notice> <WLSS.Engine> <BEA-330071> <WebLogic Sip
Server "soa_managed_server01" patch version: WebLogic Server 10.3.5.0 Fri Apr 1
20:20:06 PDT 2011 1398638
Javax Server Pages Client Capable 1.2 Tue Jul 13 02:43:41 EDT 2010
Expression Language 2.1 for JSP 1.0 Sun Jul 18 23:17:34 PDT 2010
Javax Enterprise Servlets Client Capable 1.0 Thu Aug 2 12:41:25 EDT 2007
Eclipse Java Development Tools 3.5.2 Thu Sep 2 09:47:11 EDT 2010
WebLogic java compiler utils package Client Capable 1.2 Thu Feb 11 03:38:50 EST
2010
WebLogic WebApp Container Public API Client Capable 1.4 Fri Oct 1 20:01:15 PDT 2
010
Oracle WebLogic Server Module Dependencies 10.3 Thu Mar 3 14:37:52 PST 2011
Oracle WebLogic Server on JRockit Virtual Edition Module Dependencies 10.3 Thu F
eb 3 16:30:47 EST 2011
ANTLR Java based compiler generator Client 2.7 Mon Jun 11 12:19:48 EDT 2007
WebLogic Descriptors for J2EE 1.5 Wed May 5 14:32:58 EDT 2010
WebLogic Descriptors for J2EE 1.5 Binding Bundle
WebLogic Specific Descriptors 1.3 Tue Sep 14 18:48:42 PDT 2010
WebLogic Specific Descriptors 1.3 Binding Bundle
WebLogic Datasource 1.9 Tue Oct 26 13:50:26 PDT 2010
WebLogic Datasource 1.9 Binding Bundle
WebLogic Beangen Client Capable 1.7 Wed Feb 24 16:02:48 PST 2010
WebLogic Beangen 1.7 Binding Bundle
WLDF Accessor Client Capable 1.5 Fri Sep 3 17:10:52 EDT 2010
WLDF Accessor 1.5 Binding Bundle
WebLogic Management Core Interfaces Client Capable 2.8 Thu Mar 3 12:10:10 EST 20
11
WebLogic Management Core Interfaces 2.8 Binding Bundle
WebLogic EJBGen Client Capable 1.1 Thu Jun 3 13:17:07 EDT 2010
Apache Byte Code Engineering Library (BCEL) extracted from 5.2.zip from http://j
akarta.apache.org/site/downloads/downloads_bcel.cgi with packages renamed from o
rg.apache.bcel to com.bea.core.repackaged.apache.bcel Client 5.2 Tue May 15 09:5
2:37 EDT 2007
Apache commons collections package 3.2 Tue Mar 20 15:48:25 MDT 2007
Apache commons lang package 2.1 Tue Mar 20 15:48:30 MDT 2007
Apache commons pool package 1.3 Tue Mar 20 15:48:36 MDT 2007
Apache commons io 1.4 package 1.0 Wed Jun 2 17:36:36 EDT 2010
Apache commons fileupload 1.2.1 package 1.0 Wed Jun 2 17:36:36 EDT 2010
Apache DOM implementation 1.0 Tue Mar 20 15:36:46 MDT 2007
Apache Logging Support 1.0 Tue Mar 20 15:36:50 MDT 2007
Apache OpenJPA classes 1.2 Thu Jul 22 05:16:07 EDT 2010
XMLBeans - Apache SVN rev 962560 2.1 Thu Jul 15 09:52:54 EDT 2010
BEA Logging Runtime Support Client Capable 1.8 Mon Jun 7 12:07:02 PDT 2010
BEA Common Security Open SAML 1.0 Fri May 14 20:18:10 PDT 2010
BEA OpenSAML 2.0 1.0 Wed Mar 24 13:18:27 PDT 2010
bea-harvester-api2.0 Client Capable 2.3 Mon Feb 15 14:41:06 EST 2010
bea-harvester-jmx2.0 Client Capable 2.3 Wed Feb 3 11:54:03 PST 2010
bea-harvester-utils Client Capable 1.4 Mon Feb 15 14:41:06 EST 2010
bea-mbean-typing-util 1.4 Wed Feb 24 19:15:33 EST 2010
Javolution 3.7.19 3.7 Tue Aug 28 17:32:21 PDT 2007
Joda-time 1.2.1 1.2 Tue Aug 28 17:32:27 PDT 2007
BEA STAX Build Time Support 1.5 Tue May 4 07:32:25 PDT 2010
BEA STAX Runtime Time Support Client Capable 1.7 Wed Aug 4 19:40:47 EDT 2010
BEA Generic Annotations Client Capable 1.3 Sat Jul 11 00:30:54 EDT 2009
BEA Kodo 1.4 Mon Feb 7 16:22:04 PST 2011
BEA Kodo Integration Client Capable 1.6 Sun Nov 22 16:29:06 PST 2009
BEA Kodo Integration 1.6 Binding Bundle
BEA Kodo Integration Tools 1.4 Thu Feb 3 16:07:53 EST 2011
XML Beans Marshalling (package renamed com.bea) SVN 962560 2.3 Thu Mar 3 12:10:1
0 EST 2011
WebLogic Utils Client Capable 1.9 Thu Mar 3 12:10:10 EST 2011
Aspect 5.3 Fri Jun 4 14:55:18 PDT 2010
BEA Apache Commons Logging Repackaged 1.2 Mon Jun 11 12:47:12 EDT 2007
Spring Framework 1.1 Thu Dec 3 12:21:08 EST 2009
Pitchfork 1.3 Thu Jun 3 13:17:07 EDT 2010
${description} 1.2 Fri Jun 25 16:25:26 EDT 2010
CSS i18n 1.0 Fri Oct 8 10:32:52 EDT 2010
CSS xacml 1.0 Fri Oct 8 10:32:52 EDT 2010
SAML2 Utils 1.0 Fri Oct 8 10:32:52 EDT 2010
BEA Common Security Engine Implementation 1.0 Fri Oct 8 10:32:52 EDT 2010
BEA Common Security Engine Interfaces 1.0 Fri Oct 8 10:32:52 EDT 2010
BEA Common Security API 1.0 Fri Oct 8 10:32:52 EDT 2010
BEA Common Security Implementation 1.0 Fri Oct 8 10:32:52 EDT 2010
BEA Common Security JDK Utilities 1.0 Fri Oct 8 10:32:52 EDT 2010
Security Utilities 1.0 Fri Oct 8 10:32:52 EDT 2010
Common Security SAML 2.0 1.0 Fri Oct 8 10:32:52 EDT 2010
Common Security SAML 2.0 Management JavaBeans 1.0 Fri Oct 8 10:32:52 EDT 2010
Security Provider Utilities 1.0 Fri Oct 8 10:32:52 EDT 2010
SAML Utils 1.0 Fri Oct 8 10:32:52 EDT 2010
XACML Utils 1.0 Fri Oct 8 10:32:52 EDT 2010
Security Provider Environment 1.0 Fri Oct 8 10:32:52 EDT 2010
RSA certj 3.1 Wed May 5 15:11:55 PDT 2010
Netscape LDAP JDK 1.2 Mon Jun 7 15:56:47 EDT 2010
Commons Networking Utilty classes 1.0 Wed Feb 6 15:01:03 PST 2008
WebLogic SAAJ 1.6 Wed Jun 16 22:02:31 EDT 2010
WebLogic STAX Client Capable 1.9 Thu Feb 10 18:00:52 PST 2011
jaxb-impl.jar taken from Glassfish JAXB 2.1.9 1.0 Fri Aug 20 14:37:07 EDT 2010
jaxb-impl.jar taken from Glassfish JAXB 2.1.12 1.0 Thu May 6 16:10:04 PDT 2010
resolver.jar taken from Glassfish JAXWS 2.1.5 1.0 Thu Dec 3 11:46:24 EST 2009
Fastinfoset.jar taken from Glassfish JAXWS 2.1.5 1.0 Thu Dec 3 11:46:27 EST 2009
jaxws-rt.jar taken from Glassfish JAXWS 2.1.5 1.2 Mon Feb 28 17:53:01 PST 2011
Java.net implementation of MimePull.jar taken from Glassfish JAXWS 2.1.5 1.0 Thu
Dec 3 11:46:33 EST 2009
Codehaus STaX Interfaces 3.0.1 1.0 Mon Mar 8 20:49:50 PST 2010
Woodstox STaX Parser 4.0.5 1.0 Thu Dec 3 11:35:43 EST 2009
jaxws-tools.jar taken from Glassfish JAXWS 2.1.5 1.1 Fri Sep 24 17:55:05 PDT 201
0
Java.net Stax Extensions 1.0 Tue Jun 3 07:12:06 PDT 2008
Java.net xml stream buffer 1.0 Tue Mar 17 05:24:12 PDT 2009
Jakarta ORO 1.0 Wed Feb 6 15:01:03 PST 2008
Javax Enterprise Activation 1.1 Tue Apr 8 09:31:17 PDT 2008
Javax Annotation 1.0 Fri Dec 25 09:02:47 PST 2009
Javax Interceptor 1.0 Tue Mar 20 15:37:16 MDT 2007
Javax Enterprise Beans 3.0 Mon Jun 11 12:21:01 EDT 2007
Java Data Objects 2.0 Mon Jun 11 12:20:56 EDT 2007
Java Enterprise Deployment APIs 1.2 Tue Mar 20 15:37:28 MDT 2007
Java Enterprise Messaging 1.1 Mon Jun 11 12:21:11 EDT 2007
Java Web Services 2.0 Tue Mar 20 15:37:37 MDT 2007
Javax Enterprise Mail 1.1 Mon Jul 6 10:41:09 MDT 2009
Java Enterprise Management APIs 1.0 Tue Mar 20 15:37:49 MDT 2007
Java Persistence Client Capable 1.0 Tue Oct 7 12:18:34 PDT 2008
Java Connector 1.5 Mon Jun 11 12:22:07 EDT 2007
Java Authorization Contract for Containers 1.0 Wed Feb 6 15:01:03 PST 2008
Javax Transaction APIs Client Capable 1.0 Thu Aug 2 12:42:14 EDT 2007
JAXB 2.1 Mon Jun 11 12:22:53 EDT 2007
Java XML Registry 1.0 Wed Feb 6 15:01:03 PST 2008
Java XML Soap Extensions 1.3 Mon Jun 11 12:22:59 EDT 2007
Java Stream XML Extensions 1.1 Mon Jun 11 12:23:05 EDT 2007
JAX-WS APIs 2.1 Mon Jun 11 12:23:16 EDT 2007
Java API for XML-based RPC 1.2 Mon Jun 11 12:23:10 EDT 2007
Monfox Dynamic SNMP Agent 1.1 Fri Mar 19 05:46:27 MDT 2010
Serp bytecode manipulation framework 1.14.3 Fri Jun 11 12:06:08 PDT 2010
WebLogic Apache Classes Client Capable 1.2 Thu Feb 18 22:06:19 PST 2010
WebLogic BeanInfo Caching and Discovery Client Capable 2.4 Sat Oct 25 20:46:29 P
DT 2008
WebLogic Descriptor Client Capable 1.9 Tue Jul 20 16:03:09 EDT 2010
Repackaged ASM-3.2 1.0 Fri Jul 31 19:30:27 MDT 2009
Repackaged asm-commons-3.2 1.0 Fri Jul 31 19:30:27 MDT 2009
Repackaged asm-tree-3.2 1.0 Fri Jul 31 19:30:27 MDT 2009
Repackaged asm-util-3.2 1.0 Fri Jul 31 19:30:27 MDT 2009
Oracle JFR 1.0 Thu Feb 18 19:06:33 PST 2010
WebLogic Diagnostics Core Interfaces Client Capable 2.5 Thu Jun 3 05:20:41 PDT 2
010
WebLogic Diagnostics Logging Client Capable 1.2 Fri Dec 12 11:37:59 MST 2008
WebLogic Diagnostics Query Module Client Capable 1.2 Tue Oct 27 02:48:36 PDT 200
9
WebLogic Diagnostics Instrumentor Tool 1.7 Tue May 18 03:51:46 PDT 2010
WebLogic Diagnostics Instrumentor Config Tool 1.7 Tue Jun 29 16:41:19 EDT 2010
WebLogic Diagnostics JRockit Flight Recorder Interfaces Client Capable 1.1 Fri O
ct 29 16:32:05 EDT 2010
Diagnostics Notifications Module Client Capable 1.4 Sun Nov 22 16:03:32 PST 2009
BEA Logging Runtime Support Client Capable 1.5 Thu Apr 29 20:43:42 EDT 2010
WebLogic i18n Runtime Support Client Capable 1.8 Fri Sep 10 08:12:34 EDT 2010
WebLogic i18n Build Support Client Capable 1.5 Fri Feb 19 15:03:15 EST 2010
WebLogic I18N tools Client Capable 1.3 Sun Nov 22 16:03:32 PST 2009
WebLogic Management JMX Interfaces 1.4 Thu Aug 12 11:16:22 PDT 2010
WebLogic Security Provider Generation Tool 1.5 Wed Oct 14 16:39:28 MDT 2009
WebLogic Security Provider Generation Tool Client Capable 1.5 Wed Oct 14 16:39:2
8 MDT 2009
WebLogic Messaging Kernel Client Capable 1.8 Mon Aug 23 21:42:11 EDT 2010
WebLogic Resource Pool Client Capable 1.7 Mon Sep 27 12:00:08 EDT 2010
WebLogic Socket Muxer API Client Capable 1.2 Thu Apr 1 21:16:27 EDT 2010
WebLogic RMI Client Capable 1.10 Tue Mar 22 16:56:32 PDT 2011
Common Security WebLogic Server Integration Support 1.0 Fri Oct 8 10:32:52 EDT
2010
Server Lifecycle Interfaces Client Capable 1.4 Fri Feb 19 15:03:15 EST 2010
WebLogic Store Client Capable 1.7 Fri Dec 17 16:52:31 EST 2010
WebLogic STORE GXA Client Capable 1.6 Mon Aug 23 21:16:10 EDT 2010
WebLogic Store Admin Tool Client Capable 1.2 Thu Jan 21 10:24:18 PST 2010
WebLogic JDBC Store Client Capable 1.3 Mon May 17 10:46:33 PDT 2010
WebLogic JTA implementation Client Capable 2.7 Fri Sep 17 12:19:45 PDT 2010
WebLogic Utils 1.9 Thu Mar 3 12:10:10 EST 2011
Agent Utililities 1.1 Tue Feb 16 00:16:03 EST 2010
WebLogic Utility Classloader implementations Client Capable 1.9 Wed Mar 2 14:10:
04 PST 2011
WebLogic Utils for working with Expressions Client Capable 1.4 Tue Sep 29 14:45:
53 EDT 2009
WebLogic Utils for Dynamically Generated Class Wrappers Client Capable 1.4 Fri F
eb 13 14:44:23 MST 2009
WebLogic Timers Client Capable 1.7 Thu Feb 18 13:08:44 EST 2010
WebLogic Work Manager Client Capable 1.10 Thu Feb 17 10:25:54 PST 2011
WebLogic Workarea Client Capable 1.7 Wed Feb 24 17:18:56 PST 2010
WebLogic XML XPath Implementation Client Capable 1.4 Mon Feb 22 15:07:14 PST 201
0
Weblogic Tuxedo Connector Core Client Capable 1.5 Sat Jul 3 19:05:38 EDT 2010
WebLogic Security 1.0 Fri Oct 8 10:32:52 EDT 2010
Weblogic Server Java Authentication Helper Classes Client Capable 1.1 Mon Jul 5
20:42:35 EDT 2010
Weblogic Server Message Digest Utilities Client Capable 1.0 Thu Aug 2 12:51:30 E
DT 2007
Weblogic Server Authenticated Subject Client Capable 1.1 Thu Oct 28 05:46:37 PDT
2010
Weblogic Server Authenticated Subject Client Capable 1.5 Thu Sep 9 10:23:21 MDT
2010
PrintingSecurityManager - PSM 1.1 Tue Feb 16 05:30:08 PST 2010
WebLogic security ssl classes 1.0 Tue Jun 15 17:39:53 EDT 2010
WebLogic Nodemanager Plugin Client Capable 1.3 Tue Nov 18 18:23:10 EST 2008
nodemanager module for managed processes 1.0 Thu Apr 8 15:14:38 PDT 2010
WebLogic JMS Pool Client Capable 1.8 Thu Mar 3 14:11:40 PST 2011
Contains compiled schema type from WLS 9.0 for WLP compatibility 1.3 Wed Feb 24
19:15:33 EST 2010
WebLogic Http Pub/Sub Module Client Capable 1.6 Mon Jul 12 02:31:07 EDT 2010
Class Redefinition Project 1.5 Mon May 10 19:48:21 EDT 2010
Class Redefinition Project Client Capable 1.5 Mon Apr 5 17:00:52 PDT 2010
Class Redefinition Project 1.5 Binding Bundle
Commonj SDO 1.0 Wed Sep 24 19:11:23 PDT 2008
WebLogic Coherence Descriptor 1.1 Wed May 5 15:17:47 EDT 2010
WebLogic Coherence Descriptor 1.1 Binding Bundle
This module contains all message catalogs 1.1 Fri Dec 17 08:04:35 PST 2010
WebLogic WebService Public API's 1.1 Tue Sep 21 22:15:05 EDT 2010
WebLogic EclipseLink Integration 1.0 Thu Feb 25 14:56:43 PST 2010
WebLogic SCA Client 1.0 Thu Feb 25 00:27:10 EST 2010
WebLogic RAC Module UCP Client Capable 1.0 Mon Sep 13 09:03:00 PDT 2010
BEA Patches of apache ant Client Capable 1.2 Wed Jan 13 08:48:17 PST 2010
Oracle WebLogic Server 10.3.4.0 at 710154 built on: 2010/09/30
Oracle WebLogic Server 10.3.4.0 at 710154 built on: 2010/09/30
Oracle WebLogic Server Datatier 10.3.4.0 at 710154 built on: 2010/09/30
Oracle WebLogic Server 10.3.4.0 at 710154 built on: 2010/09/30
WebLogic SIPServer Extension API 10.3.4.0 at 709997 built on 2010/09/27
WebLogic SIPServer Extension API 10.3.4 at 709997 built on 2010/09/27
WebLogic SIPServer CallState 10.3.4 at 709997 built on 2010/09/27
Oracle WebLogic Communications SCTP 10.3.1 at 688160 built on 2009/03/11
WebLogic WebService Databinding Plugins 1.3 Wed Dec 1 17:41:28 EST 2010
WebLogic WebService Databinding 1.3 Tue Oct 18 16:38:56 EDT 2011
WebLogic SIP Activator 10.3.4 at 710163 built on 2010/09/30
>
<Aug 30, 2012 1:14:08 AM IST> <Error> <WLSS.Engine> <BEA-330075> <There are no s
ip nor diameter channels targeted to server "soa_managed_server01">
<Aug 30, 2012 1:14:08 AM IST> <Error> <WLSS.Engine> <BEA-330049> <Failed to star
t the sip service, shutting down>
C:\Oracle\Middleware\user_projects\domains\sudheers_domain\bin
Thanks in advance,
SudheerHi Vlad, Kalyan
Thanks for the response. Actually i am not planning to configure weblogic SIP... as it may need little insight. I just created domain including everything.
Now i have created a new domain with basic functionality with default configuration. Now everything is working fine. I can see the Admin console as well.
But i have stuck up in running the EM console. Below is the CMD prompt trace.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\suchalam>cd C:\Oracle\Middleware\user_projects\domains\sudheer_domain\b
in
C:\Oracle\Middleware\user_projects\domains\sudheer_domain\bin>startManagedWebLog
ic.cmd soa_server1
** Setting up SOA specific environment for win...
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1
\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\nat
ive\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\O
RGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bi
n;C:\Oracle\instantclient_11_2;C:\Oracle\oraclexe\app\oracle\product\10.2.0\serv
er\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System
32\WindowsPowerShell\v1.0\;C:\Program Files\CREDANT\Shield v7.1\;C:\Program File
s (x86)\SSH Communications Security\SSH Tectia\SSH Tectia AUX;C:\Program Files (
x86)\SSH Communications Security\SSH Tectia\SSH Tectia AUX\Support binaries;C:\P
rogram Files (x86)\SSH Communications Security\SSH Tectia\SSH Tectia Broker;C:\P
rogram Files (x86)\SSH Communications Security\SSH Tectia\SSH Tectia Client;C:\O
racle\Middleware\jdeveloper\ant\bin;C:\Oracle\product\10.2.0.1\BIN;C:\Oracle\Mid
dleware\jdk160_24\bin;;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920
_8;C:\Oracle\Middleware\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
USER_MEM_ARGS=-Xms512m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
JAVA_OPTIONS=-Dweblogic.security.SSL.trustedCAKeyStore="C:\Oracle\Middleware\wls
erver_10.3\server\lib\cacerts" -Xverify:none
** End SOA Specific environment setup for win.
** SOA specific environment is already set. Skipping ...
JAVA Memory arguments: -Xms512m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
:\Oracle\Middleware\Oracle_SOA1\soa\modules\user-patch.jar;C:\Oracle\Middleware\
Oracle_SOA1\soa\modules\soa-startup.jar;;C:\Oracle\MIDDLE~1\patch_wls1035\profil
es\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jd
ev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDD
LE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp
.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\mo
dules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.
3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.j
ar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~
1\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\Oracle\MIDDLE~1\ORACLE~1\soa\modul
es\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\Oracle\Middleware\Oracle_SOA1\so
a\modules\oracle.soa.common.adapters_11.1.1\oracle.soa.common.adapters.jar;C:\Or
acle\Middleware\Oracle_SOA1\communications\modules\usermessaging-config_11.1.1.j
ar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xsu12.jar;C:\Oracle\MID
DLE~1\modules\features\weblogic.server.modules.xquery_10.3.1.0.jar;C:\Oracle\Mid
dleware\Oracle_SOA1\soa\modules\db2jcc4.jar;C:\Oracle\MIDDLE~1\USER_P~1\domains\
SUDHEE~2\config\soa-infra;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\fabric-ur
l-handler_11.1.1.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\quartz-all-1.6
.5.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1\ora
cle.soa.fabric.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules\oracle.soa.fabri
c_11.1.1\fabric-runtime-ext-wls.jar;C:\Oracle\Middleware\Oracle_SOA1\soa\modules
\oracle.soa.adapter_11.1.1\oracle.soa.adapter.jar;C:\Oracle\Middleware\Oracle_SO
A1\soa\modules\oracle.soa.b2b_11.1.1\oracle.soa.b2b.jar;C:\Oracle\MIDDLE~1\ORACL
E~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby
\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;C:\Oracle
\Middleware\jdeveloper\ant\lib;C:\Oracle\Middleware\jdk160_24\lib;
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1
\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\nat
ive\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\O
RGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bi
n;C:\Oracle\instantclient_11_2;C:\Oracle\oraclexe\app\oracle\product\10.2.0\serv
er\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System
32\WindowsPowerShell\v1.0\;C:\Program Files\CREDANT\Shield v7.1\;C:\Program File
s (x86)\SSH Communications Security\SSH Tectia\SSH Tectia AUX;C:\Program Files (
x86)\SSH Communications Security\SSH Tectia\SSH Tectia AUX\Support binaries;C:\P
rogram Files (x86)\SSH Communications Security\SSH Tectia\SSH Tectia Broker;C:\P
rogram Files (x86)\SSH Communications Security\SSH Tectia\SSH Tectia Client;C:\O
racle\Middleware\jdeveloper\ant\bin;C:\Oracle\product\10.2.0.1\BIN;C:\Oracle\Mid
dleware\jdk160_24\bin;;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920
_8;C:\Oracle\Middleware\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms512m -Xmx512m -XX:PermSize=12
8m -XX:MaxPermSize=512m -Dweblogic.Name=soa_server1 -Djava.security.policy=C:\Or
acle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.security.SSL.trus
tedCAKeyStore="C:\Oracle\Middleware\wlserver_10.3\server\lib\cacerts" -Xverify:
none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MID
DLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -D
common.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.ap
ache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.ho
me=C:\Oracle\MIDDLE~1\USER_P~1\domains\SUDHEE~2 -Djrockit.optfile=C:\Oracle\MIDD
LE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.conf
ig.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SUDHEE~2\config\FMWCON~1\servers\soa_
server1 -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SUDHEE~2\
config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\
SUDHEE~2\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P
~1\domains\SUDHEE~2\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=
C:\Oracle\MIDDLE~1\USER_P~1\domains\SUDHEE~2\config\fmwconfig\jps-config.xml -Do
racle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\SUDHEE~2\servers\soa_
server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirec
tory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~
1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle
.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.
common.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnable
d=false -Doracle.security.jps.policy.migration.validate.principal=false -da:org
.apache.xmlbeans... -Dsoa.archives.dir=C:\Oracle\Middleware\Oracle_SOA1\soa -Dso
a.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=C:\Oracle\MID
DLE~1\USER_P~1\domains\SUDHEE~2 -Dtangosol.coherence.clusteraddress=227.7.7.9 -D
tangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soa
p.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transact
ion.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.n
et.ssl.trustStore=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.or
acle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dbam.orac
le.home=C:\Oracle\Middleware\Oracle_SOA1 -Dums.oracle.home=C:\Oracle\Middleware\
Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=ht
tp://SUCHALAM-WS:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.lo
gErrorsToConsole=false -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\prof
iles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profile
s\default\sysext_manifest_classpath weblogic.Server
<Sep 2, 2012 6:51:28 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ J
CE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 2, 2012 6:51:29 PM IST> <Info> <Security> <BEA-090906> <Changing the defaul
t Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 2, 2012 6:51:30 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsyste
ms Inc.>
<Sep 2, 2012 6:51:32 PM IST> <Info> <Security> <BEA-090065> <Getting boot identi
ty from user.>
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<Sep 2, 2012 6:51:42 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic
Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Sep 2, 2012 6:51:45 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to STARTING>
<Sep 2, 2012 6:51:45 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing sel
f-tuning thread pool>
<Sep 2, 2012 6:51:46 PM IST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\Oracle\Middleware\user_projects\domains\sudheer_domain\servers\soa_s
erver1\logs\soa_server1.log is opened. All server side log events will be writte
n to this file.>
<Sep 2, 2012 6:51:59 PM IST> <Notice> <Security> <BEA-090082> <Security initiali
zing using security realm myrealm.>
<Sep 2, 2012 6:53:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to STANDBY>
<Sep 2, 2012 6:53:56 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to STARTING>
<Sep 2, 2012 7:19:07 PM IST> <Warning> <J2EE> <BEA-160140> <Unresolved optional
package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.applcore.m
odel, Specification-Version: 0.1, Implementation-Version: 11.1.1.0.0, referenced
from: C:\Oracle\Middleware\user_projects\domains\sudheer_domain\servers\soa_ser
ver1\tmp\_WL_user\usermessagingserver\y73z7z]. Make sure the referenced optional
package has been deployed as a library.>
<Sep 2, 2012 7:19:12 PM IST> <Warning> <EJB> <BEA-015036> <In the EJB MessageRec
eiverBean(Application: usermessagingserver, EJBComponent: sdpmessagingengine.jar
), the value for the activation config property 'connectionFactoryJNDIName' will
be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFactor
y';>
It kept on waiting here for so long. Can u please suggest me what is missing here.
Thanks in advance,
Sudheer -
File too large error unpacking War during app deploy - RHEL &WLS 10.3.5
I'm stumped and I'm hoping someone can help out here. Does anyone have any insights into the cause of my problem below, or tips on how to diagnose the cause?
scenario
We ran into an open files limit issue on our RH Linux servers, and had the SA boost the our open files limit fro 1024 to 3096. This seems to have solved the open files limit issue, once we restarted the node managers and the managed servers (our WLS startup script sets the soft limit to the hard limit).
But now we've got a new issue, right after this change. The admin server is now no longer able to deploy and war/ear, as when I click on "Activate" after the install I get
Message icon - Error An error occurred during activation of changes, please see the log for details.
Message icon - Error Failed to load webapp: 'TemplateManagerAdmin-1.0-SNAPSHOT.war'
Message icon - Error File too large
on the console, and see the stack trace below in the Admin server log (nothing in the managed server logs) - indicating it's getting the error in exploding the war.
I've tried both default deployment mode, and the mode "will make the deployment available in the following location" where the war is manually copied to the same location on each box, available to each server - all with the same result. I've also tried restarting the admin server, but no luck.
The files are not overly large (<=34 MByte) and we had no trouble with them before today. I'm able to log in as the WebLogic user and copye files, etc. with no problem.
There is no disk space issue - plenty of space left on all of our filesystems. There is, as far as I can tell, no OS or user file size limit issue:
-bash-3.2$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 73728
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 3096
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 10240
cpu time (seconds, -t) unlimited
max user processes (-u) unlimited
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
environment
WLS 10.3.5 64-bit
Linux 64-bit RHEL 5.6
Sun Hotspot 1.6.0_29 (64--bit)
stack trace
####<Mar 6, 2013 4:09:33 PM EST> <Error> <Console> <nj09mhm5111> <prp_appsvcs_admin> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <steven_elkind> <> <> <1362604173724> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: Failed to load webapp: 'TemplateManagerAdmin-1.0-SNAPSHOT.war'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.io.IOException: File too large
at java.io.FileOutputStream.writeBytes(Native Method)
at java.io.FileOutputStream.write(FileOutputStream.java:282)
at weblogic.utils.io.StreamUtils.writeTo(StreamUtils.java:19)
at weblogic.utils.FileUtils.writeToFile(FileUtils.java:117)
at weblogic.utils.jars.JarFileUtils.extract(JarFileUtils.java:285)
at weblogic.servlet.internal.ArchivedWar.expandWarFileIntoDirectory(ArchivedWar.java:139)
at weblogic.servlet.internal.ArchivedWar.extractWarFile(ArchivedWar.java:108)
at weblogic.servlet.internal.ArchivedWar.<init>(ArchivedWar.java:57)
at weblogic.servlet.internal.War.makeExplodedJar(War.java:1093)
at weblogic.servlet.internal.War.<init>(War.java:186)
at weblogic.servlet.internal.WebAppServletContext.processDocroot(WebAppServletContext.java:2789)
at weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServletContext.java:2666)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:413)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:493)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:418)
at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:972)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)In the end, the problem was not in the Admin server where the log entry is, but in one of the managed servers where there was no such log entry.
Somehow, and we have no idea how, the NodeManager process had the soft limit for max file size set to 2k blocks. Thus, the managed server inherited that. We restarted the Node Manager, then the managed server, and the problem went away.
The diagnostic that turned the trick:
cat /proc/<pid>/limits
for the managed server showed the bad limit setting, then diagnosis proceeded from there. The admin server, of course, had "unlimited" since it was not the source of the problem. -
Can JMS topics and queues be clustered in a WLS 7.0 Cluster?
We are installing a weblogic 7.0 cluster with 1 admin server and 2 managed
node servers. Two nodes have been clustered. We are at the point where we
need to configure JMS. Has any one implemented JMS in WLS 7 clustered
environment? What are the things to watch out when clustering JMS? Can JMS
topics and queues be clustered?
TIA for any helpful hints and comments.
Regards
"Karim Ali" <[email protected]> wrote:
>> Has any one implemented JMS in WLS 7 clustered
>> environment?
I'm currently working on a project with WLS 7 here at work, involving
the implementation of BEA's JMS Cluster. So far, I really haven't had
many hiccups.
"Karim Ali" <[email protected]> wrote:
>> What are the things to watch out when clustering JMS?
At least in WLS 7, the biggest thing that stands out is the lack of
automatic failover. Also, Message Paging -- make sure you configure
paging high/low thresholds. Or, if you don't wish for it to occur but
can't stop the server (very common these days with SLAs), set that
byte/message high threshold to a very large number (correct me if I'm
wrong, but I believe BEA recommends 2^63 -1).
"Karim Ali" <[email protected]> wrote:
>> Can JMS topics and queues be clustered?
Well, since Topics and Queues are extensions of the
javax.jms.Destination interface, the answer is: Yes!
(SIDE NOTE: most people usually refer to them as a [JMS] "destination"
-- it avoids a lot of conceptual baggage and plus, less typing!)
You'll probably want to see this section of BEA's e-docs:
http://edocs.bea.com/wls/docs70/adminguide/jms.html#config_distributed_destinations
later,
Brian J. Mitchell
BEA Systems Administrator
TRX
Atlanta, GA
email: [email protected]
office: 404-327-7238
mobile: 678-283-6530
-
11g Method -- byte[] JGeometry.store( JGeometry ) fails for certain SQL
Hi All,
Using the new in 11g byte[] JGeometry.store( JGeometry ) method as oppose to the traditional STRUCT JGeometry.store( JGeometry, Connection) method fails for certain SQL statements.
It works fine for statements like this:
UPDATE PARCELS SET GEOM = ? WHERE ID = 47;
These statements give errors though:
UPDATE PARCELS SET GEOM = SDO_MIGRATE.TO_CURRENT( ?, (SELECT DIMINFO FROM USER_SDO_GEOM_METADATA WHERE TABLE_NAME = 'PARCELS' AND COLUMN_NAME = 'GEOM') ) WHERE ID = 47;
ORA-06553: PLS-306: wrong number or types of arguments in call to 'TO_CURRENT'
SELECT ID, LABEL, GEOM FROM PARCELS WHERE SDO_NN( GEOM, ?, 'SDO_BATCH_SIZE=5000' ) = 'TRUE';
ORA-29900: operator binding does not exist
ORA-06553: PLS-306: wrong number or types of arguments in call to 'SDO_NN'
? Being where I bind in the byte[] / Object as appropriate.
So I get the above errors when using setBytes( index, JGeometry.store( jgeom ) ); but it work when using: setObject( index, JGeometry.store( jgeom, con ) );
Is this a bug is known / will be fixed ?
Thanks,
RonanRonan,
Typically this works fine in OC4J, but does not work in WLS or other containers since the connection type is different between.
In OC4J, the connection is an Oracle connection which can handle these object conversions.
We will try to improve the documentation for this to explicitly specify where this interface can be used.
siva -
After installing WLS 8.1 and the AIX supplement patch plus fixes to java1.4
I am still unable to bring up my server. The following error occurs:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
<May 5, 2004 1:29:26 PM MDT> <Info> <WebLogicServer> <BEA-000377> <Starting
WebLogic Server with Classic VM Version 1.4.1 from IBM Corporation>
<May 5, 2004 1:29:28 PM MDT> <Info> <Configuration Management> <BEA-150016>
<This server is being started as the administration server.>
<May 5, 2004 1:29:28 PM MDT> <Info> <Management> <BEA-141107> <Version:
WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284WebLogic XMLX
Module 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 >
<May 5, 2004 1:29:30 PM MDT> <Notice> <Management> <BEA-140005> <Loading
domainconfiguration from configuration repository at
/users/interop8/bea/user_projects/domain/hooxsgb/./config.xml.>
<May 5, 2004 1:29:49 PM MDT> <Notice> <Log Management> <BEA-170019> <The
serverlog file
/users/interop8/bea/user_projects/domain/hooxsgb/myserver/myserver.logis
opened. All server side log events will be written to this file.>
<May 5, 2004 1:30:08 PM MDT> <Notice> <Security> <BEA-090082> <Security
initializing using security realm myrealm.>
<May 5, 2004 1:30:09 PM MDT> <Notice> <WebLogicServer> <BEA-000327>
<Starting WebLogic Admin Server "myserver" for domain "hooxsgb">
JVMDG217: Dump Handler is Processing a Signal - Please Wait.
JVMDG303: JVM Requesting Java core file
JVMDG304: Java core file written to
/users/interop8/bea/user_projects/domain/hooxsgb/javacore37624.1083785465.tx
t
JVMDG215: Dump Handler has Processed Exception Signal 11.
System Information for dixie
MODEL Bull ESCALA T (e8ED)
CPU 4 x K45, 32 bits (360.0 MH) ** 4 enabled **
MEM 2304 MB real memory
FIRM 03.03.09
OS AIX 5.1.0.0 [Fix level 58] [Maintenance level 05]
KERN System currently booted on 32 bits kernel
Attached is the Java core file
Any ideas?
Eric
[javacore37624.1083785465.txt]BEA currently supports AIX 5.1 ML-4. Your configuration is ML-5.
Eric Hardesty wrote:
After installing WLS 8.1 and the AIX supplement patch plus fixes to java1.4
I am still unable to bring up my server. The following error occurs:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://[hostname]:[port]/console *
<May 5, 2004 1:29:26 PM MDT> <Info> <WebLogicServer> <BEA-000377> <Starting
WebLogic Server with Classic VM Version 1.4.1 from IBM Corporation>
<May 5, 2004 1:29:28 PM MDT> <Info> <Configuration Management> <BEA-150016>
<This server is being started as the administration server.>
<May 5, 2004 1:29:28 PM MDT> <Info> <Management> <BEA-141107> <Version:
WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284WebLogic XMLX
Module 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 >
<May 5, 2004 1:29:30 PM MDT> <Notice> <Management> <BEA-140005> <Loading
domainconfiguration from configuration repository at
/users/interop8/bea/user_projects/domain/hooxsgb/./config.xml.>
<May 5, 2004 1:29:49 PM MDT> <Notice> <Log Management> <BEA-170019> <The
serverlog file
/users/interop8/bea/user_projects/domain/hooxsgb/myserver/myserver.logis
opened. All server side log events will be written to this file.>
<May 5, 2004 1:30:08 PM MDT> <Notice> <Security> <BEA-090082> <Security
initializing using security realm myrealm.>
<May 5, 2004 1:30:09 PM MDT> <Notice> <WebLogicServer> <BEA-000327>
<Starting WebLogic Admin Server "myserver" for domain "hooxsgb">
JVMDG217: Dump Handler is Processing a Signal - Please Wait.
JVMDG303: JVM Requesting Java core file
JVMDG304: Java core file written to
/users/interop8/bea/user_projects/domain/hooxsgb/javacore37624.1083785465.tx
t
JVMDG215: Dump Handler has Processed Exception Signal 11.
System Information for dixie
MODEL Bull ESCALA T (e8ED)
CPU 4 x K45, 32 bits (360.0 MH) ** 4 enabled **
MEM 2304 MB real memory
FIRM 03.03.09
OS AIX 5.1.0.0 [Fix level 58] [Maintenance level 05]
KERN System currently booted on 32 bits kernel
Attached is the Java core file
Any ideas?
Eric
NULL ------------------------------------------------------------------------
0SECTION TITLE subcomponent dump routine
NULL ===============================
1TISIGINFO signal 11 received
1TIDATETIME Date: 2004/05/05 at 12:31:05
1TIFILENAME Javacore filename: /users/interop8/bea/user_projects/domain/hooxsgb/javacore37624.1083785465.txt
NULL ------------------------------------------------------------------------
0SECTION XHPI subcomponent dump routine
NULL ==============================
1XHTIME Wed May 5 12:31:05 2004
1XHSIGRECV SIGSEGV received at 0xd3a96f54 in /usr/java14/jre/bin/classic/libjvm.a. Processing terminated.
1XHFULLVERSION J2RE 1.4.1 IBM AIX build ca1411-20030930
NULL
1XHCURRENTTHD Current Thread Details
NULL ----------------------
2XHCURRSYSTHD "ListenThread.Default" sys_thread_t:0x41C0F228
3XHNATIVESTACK Native Stack
NULL ------------
3XHSTACKLINE at 0xD46194CC in Java_weblogic_socket_PosixSocketMuxer_initNative
3XHSTACKLINE at 0xD3A96F54 in mmipInvoke_V_V
3XHSTACKLINE at 0xD3A909B0 in mmipInvokeLazyJniMethod
3XHSTACKLINE at 0xD3A5CBD8 in mmipExecuteJava
3XHSTACKLINE at 0xD3A54BBC in xeRunJvmMethod
3XHSTACKLINE at 0xD3A47628 in JVM_NewInstanceFromConstructor
3XHSTACKLINE at 0xD3C5658C in Java_sun_reflect_NativeConstructorAccessorImpl_newInstance0
3XHSTACKLINE at 0xD3A9641C in mmipInvoke_OO_O
3XHSTACKLINE at 0xD3A5CBD8 in mmipExecuteJava
3XHSTACKLINE at 0xD3BBCDF8 in mmijExecuteJavaFromJIT
3XHSTACKLINE at 0xD3C8AC90 in jit_init_memory_locks_md
NULL
1XHOPENV Operating Environment
NULL ---------------------
2XHHOSTNAME Host : dixie.gpv.az05.bull.com:141.112.17.150
2XHOSLEVEL OS Level : AIX 5.1.0.0
2XHCPUS Processors -
3XHCPUARCH Architecture : POWER_PC (impl: POWER_604, ver: PV_604)
3XHNUMCPUS How Many : 4
3XHCPUSENABLED Enabled : 4
NULL
1XHUSERLIMITS User Limits (in bytes except for NOFILE and NPROC) -
NULL -----------
2XHUSERLIMIT RLIMIT_FSIZE : infinity
2XHUSERLIMIT RLIMIT_DATA : 2147483645
2XHUSERLIMIT RLIMIT_STACK : 33554432
2XHUSERLIMIT RLIMIT_CORE : 1073741312
2XHUSERLIMIT RLIMIT_NOFILE : infinity
2XHLIMIT NPROC(max) : 4000
NULL
1XHPAGESPACES Page Space (in blocks) -
NULL ----------
2XHPAGESPACE /dev/hd6: size=200704, free=199709
2XHPAGESPACE /dev/paging00: size=196608, free=196495
2XHPAGESPACE /dev/paging01: size=196608, free=196495
NULL
1XHSIGHANDLERS JVM Signal Handlers
NULL -------------------
2XHSIGHANDLER SIGHUP : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGINT : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGQUIT : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGILL : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGTRAP : JITSigTrapHandler (libjitc.a)
2XHSIGHANDLER SIGABRT : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGEMT : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGFPE : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGBUS : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGSEGV : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGSYS : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGPIPE : ignored
2XHSIGHANDLER SIGTERM : intrDispatchMD (libhpi.a)
NULL
1XHSIGHANDLERS Chained Signal Handlers
NULL -----------------------
2XHSIGHANDLER SIGHUP : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGINT : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGQUIT : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGILL : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGTRAP : JITSigTrapHandler (libjitc.a)
2XHSIGHANDLER SIGABRT : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGEMT : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGFPE : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGBUS : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGSEGV : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGSYS : intrDispatchMD (libhpi.a)
2XHSIGHANDLER SIGPIPE : ignored
2XHSIGHANDLER SIGTERM : intrDispatchMD (libhpi.a)
NULL
1XHENVVARS Environment Variables
NULL ---------------------
2XHENVVAR _=/usr/java14/bin/java
2XHENVVAR JAVA_VENDOR=IBM
2XHENVVAR LANG=en_US
2XHENVVAR TMOUT2=43200
2XHENVVAR PRODUCTION_MODE=
2XHENVVAR LOGIN=interop8
2XHENVVAR CLASSPATHSEP=:
2XHENVVAR PAGER=more
2XHENVVAR POINTBASE_HOME=/users/interop8/bea/weblogic81/common/eval/pointbase
2XHENVVAR PATH=/users/interop8/bea/weblogic81/server/bin:/usr/java14/jre/bin:/usr/java14/bin:/users/interop8/GCOSInterop/dsad/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin::/app/oracle/product/8.1.7/bin:/usr/local/bin:/usr/lbin:/users/interop8/jte/bin
2XHENVVAR RES_RETRY=1
2XHENVVAR JTE_BASE=/users/interop8/jte
2XHENVVAR JAVA_VM=
2XHENVVAR LC__FASTMSG=true
2XHENVVAR POINTBASE_CLASSPATH=:/users/interop8/bea/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/users/interop8/bea/weblogic81/common/eval/pointbase/lib/pbclient44.jar
2XHENVVAR CGI_DIRECTORY=/var/docsearch/cgi-bin
2XHENVVAR EDITOR=vi
2XHENVVAR EXINIT=set tabstop=4
2XHENVVAR HISTFILE=/users/interop8/.sh_history
2XHENVVAR CLASSPATH=/usr/java14/lib/tools.jar:/users/interop8/bea/weblogic81/server/lib/weblogic_sp.jar:/users/interop8/bea/weblogic81/server/lib/weblogic.jar:/users/interop8/bea/weblogic81/server/lib/ojdbc14.jar::/users/interop8/bea/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/users/interop8/bea/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/usr/java14/jre/lib/rt.jar:/users/interop8/bea/weblogic81/server/lib/webservices.jar:
2XHENVVAR LOGNAME=interop8
2XHENVVAR RES_TIMEOUT=2
2XHENVVAR MAIL=/usr/spool/mail/interop8
2XHENVVAR ETC_PROFILE=1
2XHENVVAR POINTBASE_TOOLS=/users/interop8/bea/weblogic81/common/eval/pointbase/lib/pbtools44.jar
2XHENVVAR LOCPATH=/usr/lib/nls/loc
2XHENVVAR ORACLE_SID=demo
2XHENVVAR PS1=[dixie] (interop8).${PWD#${HOME}}>
2XHENVVAR PATHSEP=:
2XHENVVAR USER=interop8
2XHENVVAR DOCUMENT_SERVER_MACHINE_NAME=localhost
2XHENVVAR AUTHSTATE=compat
2XHENVVAR BEA_HOME=/users/interop8/bea
2XHENVVAR DEFAULT_BROWSER=netscape
2XHENVVAR DISPLAY=harp.gpv.az05.bull.com:0
2XHENVVAR SHELL=/bin/ksh
2XHENVVAR ODMDIR=/etc/objrepos
2XHENVVAR JAVA_HOME=/usr/java14
2XHENVVAR DOCUMENT_SERVER_PORT=49213
2XHENVVAR TMOUT=43200
2XHENVVAR HOME=/users/interop8
2XHENVVAR MEM_ARGS=-Xms32m -Xmx200m
2XHENVVAR WEBLOGIC_CLASSPATH=/usr/java14/lib/tools.jar:/users/interop8/bea/weblogic81/server/lib/weblogic_sp.jar:/users/interop8/bea/weblogic81/server/lib/weblogic.jar:/users/interop8/bea/weblogic81/server/lib/ojdbc14.jar
2XHENVVAR TERM=vt220
2XHENVVAR MAILMSG=[YOU HAVE NEW MAIL]
2XHENVVAR ORACLE_HOME=/app/oracle/product/8.1.7
2XHENVVAR ITECONFIGSRV=/etc/IMNSearch
2XHENVVAR PWD=/users/interop8/bea/user_projects/domain/hooxsgb
2XHENVVAR DOCUMENT_DIRECTORY=/usr/docsearch/html
2XHENVVAR TZ=MST7
2XHENVVAR ITECONFIGCL=/etc/IMNSearch/clients
2XHENVVAR WL_HOME=/users/interop8/bea/weblogic81
2XHENVVAR ITE_DOC_SEARCH_INSTANCE=search
2XHENVVAR A__z=! TMOUT2=! LOGNAME=! ETC_PROFILE="*TMOUT
2XHENVVAR _IBM_JAVA_PIPE_37624=
2XHENVVAR IBM_JVM_AIXTHREAD_SCOPE_OLD_VALUE=
2XHENVVAR IBM_JVM_AIXTHREAD_SCOPE_NEW_VALUE=S
2XHENVVAR AIXTHREAD_SCOPE=S
2XHENVVAR IBM_JVM_CHANGED_ENVVARS_37624=AIXTHREAD_SCOPE,LDR_CNTRL
2XHENVVAR IBM_JVM_LDR_CNTRL_OLD_VALUE=
2XHENVVAR IBM_JVM_LDR_CNTRL_NEW_VALUE=MAXDATA=0x80000000
2XHENVVAR LDR_CNTRL=MAXDATA=0x80000000
2XHENVVAR LIBPATH=/usr/java14/jre/bin:/usr/java14/jre/bin/classic:/usr/java14/jre/bin:/app/oracle/product/8.1.7}/lib:/users/interop8/bea/weblogic81/server/lib/aix
2XHENVVAR NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/opt/Xprint/MSG/%l/%N:/opt/Xprint/mercator/MSG/%l/%N:/var/spool/Xprint/config/MSG/%l/%N:/var/spool/Xprint/config/mercator/MSG/%l/%N
2XHENVVAR _IBM_ENV_INITIAL_37624=807444056
2XHENVVAR IBM_JAVA_COMMAND_LINE=/usr/java14/bin/java -Xms32m -Xmx200m -Dweblogic.Name=myserver -Dweblogic.ProductionModeEnabled= -Djava..security.policy=/users/interop8/bea/weblogic81/server/lib/weblogic.policy weblogic.Server
NULL
1XHLOADEDLIBS Loaded Libraries (sizes in bytes)
NULL ---------------------------------
2XHLIBNAME /users/interop8/bea/weblogic81/server/lib/aix/libmuxer.so
3XHLIBSIZE filesize : 20757
3XHLIBSTART text start : 0xD4618000
3XHLIBLDSIZE text size : 0x282E
3XHLIBLDORG data start : 0x41E97CF4
3XHLIBLDDATASZ data size : 0x2AC
2XHLIBNAME /usr/java14/jre/bin/libnio.a
3XHLIBSIZE filesize : 61140
3XHLIBSTART text start : 0xD460F000
3XHLIBLDSIZE text size : 0x8925
3XHLIBLDORG data start : 0x408A5598
3XHLIBLDDATASZ data size : 0x50C
2XHLIBNAME /usr/java14/jre/bin/libnet.a
3XHLIBSIZE filesize : 122155
3XHLIBSTART text start : 0xD45F9000
3XHLIBLDSIZE text size : 0x1437A
3XHLIBLDORG data start : 0x3F592990
3XHLIBLDDATASZ data size : 0x820
2XHLIBNAME /usr/java14/jre/bin/libjitc.a
3XHLIBSIZE filesize : 2760315
3XHLIBSTART text start : 0xD3C7D000
3XHLIBLDSIZE text size : 0x2330F6
3XHLIBLDORG data start : 0x3E055F40
3XHLIBLDDATASZ data size : 0x1A8A4
2XHLIBNAME /usr/lib/libi18n.a
3XHLIBSIZE filesize : 148825
3XHLIBSTART text start : 0xD007A100
3XHLIBLDSIZE text size : 0xA1AE
3XHLIBLDORG data start : 0x3DFF2A18
3XHLIBLDDATASZ data size : 0x1290
2XHLIBNAME /usr/lib/nls/loc/en_US
3XHLIBSIZE filesize : 14342
3XHLIBSTART text start : 0xD0074000
3XHLIBLDSIZE text size : 0x2D71
3XHLIBLDORG data start : 0xD0077130
3XHLIBLDDATASZ data size : 0x2324
2XHLIBNAME /usr/java14/jre/bin/libzip.a
3XHLIBSIZE filesize : 109272
3XHLIBSTART text start : 0xD3C69000
3XHLIBLDSIZE text size : 0x1349A
3XHLIBLDORG data start : 0x3D80F398
3XHLIBLDDATASZ data size : 0x1908
2XHLIBNAME /usr/java14/jre/bin/classic/libcore.a
3XHLIBSIZE filesize : 172361
3XHLIBSTART text start : 0xD3C4E000
3XHLIBLDSIZE text size : 0x1AE66
3XHLIBLDORG data start : 0x3D801610
3XHLIBLDDATASZ data size : 0xD934
2XHLIBNAME /usr/java14/jre/bin/libhpi.a
3XHLIBSIZE filesize : 159668
3XHLIBSTART text start : 0xD3C36000
3XHLIBLDSIZE text size : 0x17708
3XHLIBLDORG data start : 0x3025DCC8
3XHLIBLDDATASZ data size : 0x1420
2XHLIBNAME /usr/java14/jre/bin/libxhpi.a
3XHLIBSIZE filesize : 44366
3XHLIBSTART text start : 0xD3C2F000
3XHLIBLDSIZE text size : 0x6578
3XHLIBLDORG data start : 0x3024E058
3XHLIBLDDATASZ data size : 0xE51C
2XHLIBNAME /usr/lib/libdl.a
3XHLIBSIZE filesize : 5248
3XHLIBSTART text start : 0xD070D0F8
3XHLIBLDSIZE text size : 0x1E0
3XHLIBLDORG data start : 0x3024D0F8
3XHLIBLDDATASZ data size : 0x0
2XHLIBNAME /usr/java14/jre/bin/libjsig.a
3XHLIBSIZE filesize : 13751
3XHLIBSTART text start : 0xD3C2D000
3XHLIBLDSIZE text size : 0x1B6E
3XHLIBLDORG data start : 0x3024C2F8
3XHLIBLDDATASZ data size : 0x1D0
2XHLIBNAME /usr/java14/jre/bin/libjava.a
3XHLIBSIZE filesize : 197639
3XHLIBSTART text start : 0xD3C10000
3XHLIBLDSIZE text size : 0x1CE78
3XHLIBLDORG data start : 0x30239690
3XHLIBLDDATASZ data size : 0x132C
2XHLIBNAME /usr/java14/jre/bin/classic/libjvm.a
3XHLIBSIZE filesize : 2698157
3XHLIBSTART text start : 0xD3A28000
3XHLIBLDSIZE text size : 0x1E71F8
3XHLIBLDORG data start : 0x302111E0
3XHLIBLDDATASZ data size : 0x27BE4
2XHLIBNAME /usr/lib/libiconv.a
3XHLIBSIZE filesize : 377974
3XHLIBSTART text start : 0xD0085100
3XHLIBLDSIZE text size : 0x1403A
3XHLIBLDORG data start : 0xF0317ED0
3XHLIBLDDATASZ data size : 0xA544
2XHLIBNAME /usr/lib/libbsd.a
3XHLIBSIZE filesize : 63178
3XHLIBSTART text start : 0xD01504C0
3XHLIBLDSIZE text size : 0x8183
3XHLIBLDORG data start : 0xF0169FB0
3XHLIBLDDATASZ data size : 0x1350
2XHLIBNAME /usr/lib/libpthreads.a
3XHLIBSIZE filesize : 912571
3XHLIBSTART text start : 0xD0047000
3XHLIBLDSIZE text size : 0x2B5BD
3XHLIBLDORG data start : 0xF0139000
3XHLIBLDDATASZ data size : 0x5020
2XHLIBNAME /usr/lib/libpthreads.a
3XHLIBSIZE filesize : 912571
3XHLIBSTART text start : 0xD0043000
3XHLIBLDSIZE text size : 0x38B1
3XHLIBLDORG data start : 0xF00D6000
3XHLIBLDDATASZ data size : 0x62318
2XHLIBNAME /usr/lib/libC.a
3XHLIBSIZE filesize : 6961880
3XHLIBSTART text start : 0xD0521560
3XHLIBLDSIZE text size : 0x1F983
3XHLIBLDORG data start : 0xF01E9560
3XHLIBLDDATASZ data size : 0x6578
2XHLIBNAME /usr/lib/libC.a
3XHLIBSIZE filesize : 6961880
3XHLIBSTART text start : 0xD0507E20
3XHLIBLDSIZE text size : 0x1846B
3XHLIBLDORG data start : 0xF01DFE20
3XHLIBLDDATASZ data size : 0x8511
2XHLIBNAME /usr/lib/libC.a
3XHLIBSIZE filesize : 6961880
3XHLIBSTART text start : 0xD04E7100
3XHLIBLDSIZE text size : 0x1F75A
3XHLIBLDORG data start : 0xF01DB700
3XHLIBLDDATASZ data size : 0x3019
2XHLIBNAME /usr/lib/libcrypt.a
3XHLIBSIZE filesize : 11059
3XHLIBSTART text start : 0xD00730F8
3XHLIBLDSIZE text size : 0x86E
3XHLIBLDORG data start : 0xF00D5530
3XHLIBLDDATASZ data size : 0x128
2XHLIBNAME /usr/lib/libc.a
3XHLIBSIZE filesize : 6806102
3XHLIBSTART text start : 0xD01D5640
3XHLIBLDSIZE text size : 0x1FDB9F
3XHLIBLDORG data start : 0xF0042520
3XHLIBLDDATASZ data size : 0x91B58
NULL
NULL ------------------------------------------------------------------------
0SECTION CI subcomponent dump routine
NULL ============================
1CIJAVAVERSION J2RE 1.4.1 IBM AIX build ca1411-20030930
1CIRUNNINGAS Running as a standalone JVM
1CICMDLINE /usr/java14/bin/java -Xms32m -Xmx200m -Dweblogic.Name=myserver -Dweblogic.ProductionModeEnabled= -Djava.security.policy=/users/interop8/bea/weblogic81/server/lib/weblogic.policy weblogic.Server
1CIJAVAHOMEDIR Java Home Dir: /usr/java14/jre
1CIJAVADLLDIR Java DLL Dir: /usr/java14/jre/bin
1CISYSCP Sys Classpath: /usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java14/jre/lib/security.jar:/usr/java14/jre/lib/server.jar:/usr/java14/jre/lib/xml.jar:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/classes
1CIUSERARGS UserArgs:
2CIUSERARG vfprintf 0x30000B94
2CIUSERARG -Xms32m
2CIUSERARG -Xmx200m
2CIUSERARG -Dweblogic.Name=myserver
2CIUSERARG -Dweblogic.ProductionModeEnabled=
2CIUSERARG -Djava.security.policy=/users/interop8/bea/weblogic81/server/lib/weblogic.policy
2CIUSERARG -Dinvokedviajava
2CIUSERARG -Djava.class.path=/usr/java14/lib/tools.jar:/users/interop8/bea/weblogic81/server/lib/weblogic_sp.jar:/users/interop8/bea/weblogic81/server/lib/weblogic.jar:/users/interop8/bea/weblogic81/server/lib/ojdbc14.jar::/users/interop8/bea/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/users/interop8/bea/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/usr/java14/jre/lib/rt.jar:/users/interop8/bea/weblogic81/server/lib/webservices.jar:
2CIUSERARG vfprintf
NULL
1CIJVMMI JVM Monitoring Interface (JVMMI)
NULL ------------------------
2CIJVMMIOFF No events are enabled.
NULL
NULL ------------------------------------------------------------------------
0SECTION DC subcomponent dump routine
NULL ============================
1DCHEADEREYE Header eye catcher DCST
1DCHEADERLEN Header length 24
1DCHEADERVER Header version 1
1DCHEADERMOD Header modification 0
1DCINTERFACE DC Interface at 0x3022270C with 15 entries
2DCINTERFACE 1 - dcCString2JavaString 0x3021EA7C
2DCINTERFACE 2 - dcInt642CString 0x3021EA88
2DCINTERFACE 3 - dcJavaString2NewCString 0x3021EA94
2DCINTERFACE 4 - dcJavaString2CString 0x3021EAA0
2DCINTERFACE 5 - dcJavaString2NewPlatformString 0x3021EAAC
2DCINTERFACE 6 - dcJavaString2UTF 0x3021EAB8
2DCINTERFACE 7 - dcPlatformString2JavaString 0x3021EAD0
2DCINTERFACE 8 - dcUnicode2UTF 0x3021EADC
2DCINTERFACE 9 - dcUnicode2UTFLength 0x3021EAE8
2DCINTERFACE 10 - dcUTF2JavaString 0x3021EAF4
2DCINTERFACE 11 - dcUTFClassName2JavaString 0x3021EB00
2DCINTERFACE 12 - dcJavaString2ClassName 0x3021EAC4
2DCINTERFACE 13 - dcUTF2UnicodeNext 0x3021EB0C
2DCINTERFACE 14 - dcVerifyUTF8 0x3021EB18
2DCINTERFACE 15 - dcDumpRoutine 0x3021EB24
1DCARRAYINFO Array info at 0x302131B8 with 16 entries
2DCARRAYINFO 1 - index 0 signature 0 name N/A factor 0
2DCARRAYINFO 2 - index 0 signature 0 name N/A factor 0
2DCARRAYINFO 3 - index 2 signature L name class[] factor 4
2DCARRAYINFO 4 - index 0 signature 0 name N/A factor 0
2DCARRAYINFO 5 - index 4 signature Z name bool[] factor 1
2DCARRAYINFO 6 - index 5 signature C name char[] factor 2
2DCARRAYINFO 7 - index 6 signature F name float[] factor 4
2DCARRAYINFO 8 - index 7 signature D name double[] factor 8
2DCARRAYINFO 9 - index 8 signature B name byte[] factor 1
2DCARRAYINFO 10 - index 9 signature S name short[] factor 2
2DCARRAYINFO 11 - index 10 signature I name int[] factor 4
2DCARRAYINFO 12 - index 11 signature J name long[] factor 8
2DCARRAYINFO 13 - index 0 signature 0 name uint[] factor 0
2DCARRAYINFO 14 - index 0 signature 0 name uint1[] factor 0
2DCARRAYINFO 15 - index 0 signature 0 name uint2[] factor 0
2DCARRAYINFO 16 - index 0 signature 0 name uint3[] factor 0
NULL ------------------------------------------------------------------------
0SECTION DG subcomponent dump routine
NULL ============================
1DGTRCENABLED Trace enabled: No
1DGJDUMPBUFF Javadump buffer size (allocated): 2621440
NULL ------------------------------------------------------------------------
0SECTION ST subcomponent dump routine
NULL ============================
1STGCMODES Resettable GC: No
1STGCMODES Concurrent GC: No
1STCURHBASE Current Heap Base: 302801fc
1STCURHLIM Current Heap Limit: 3281fbfc
1STMWHBASE Middleware Heap Base: 302801fc
1STMWHLIM Middleware Heap Limit: 3281fbfc
1STGCHELPERS Number of GC Helper Threads: 3
1STJVMOPTS -Xconcurrentlevel: 0
1STJVMOPTS -Xconcurrentbackground: 0
1STGCCTR GC Counter: 7
1STAFCTR AF Counter: 7
1STHEAPFREE Bytes of Heap Space Free: 80db00
1STHEAPALLOC Bytes of Heap Space Allocated: 259fa00
1STSMBASE SM Base: 0
1STSMEND SM End: 0
1STPAMSTART PAM Start: 0
1STPAMEND PAM End: 0
1STCOMACTION Compact Action: 0
NULL ------------------------------------------------------------------------
0SECTION XE subcomponent dump routine
NULL ============================
1XETHRESHOLD MMI threshold for java methods is set to 1250
1XEJITINIT JIT is initialized
1XEJVMPIOFF JVMPI is not activated
1XEJNITHRESH MMI threshold for JNI methods is set to 0
1XETRCHIS Trace history length is set to 4
1XEJITDUMP JIT dump routine is not yet implemented.
NULL ------------------------------------------------------------------------
0SECTION LK subcomponent dump routine
NULL ============================
NULL
1LKPOOLINFO Monitor pool info:
2LKPOOLINIT Initial monitor count: 32
2LKPOOLEXPNUM Minimum number of free monitors before expansion: 5
2LKPOOLEXPBY Pool will next be expanded by: 24
2LKPOOLTOTAL Current total number of monitors: 48
2LKPOOLFREE Current number of free monitors: 9
NULL
1LKMONPOOLDUMP Monitor Pool Dump (flat & inflated object-monitors):
2LKMONINUSE sys_mon_t:0x3020EE28 infl_mon_t: 0x3020E918:
3LKMONOBJECT java.lang.ref.Reference$Lock@303017F0/303017F8: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "Reference Handler" (0x3D9C6A28)
2LKMONINUSE sys_mon_t:0x3020EED8 infl_mon_t: 0x3020E940:
3LKMONOBJECT java.lang.ref.ReferenceQueue$Lock@30301528/30301530: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "Finalizer" (0x3DA50CA8)
2LKMONINUSE sys_mon_t:0x3020EF88 infl_mon_t: 0x3020E968:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9830/302E9838: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '0' for queue: 'weblogic.kernel.Default'" (0x3EDB86A8)
2LKMONINUSE sys_mon_t:0x3020F038 infl_mon_t: 0x3020E990:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9798/302E97A0: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '1' for queue: 'weblogic.kernel.Default'" (0x3EDB8D28)
2LKMONINUSE sys_mon_t:0x3020F0E8 infl_mon_t: 0x3020E9B8:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9700/302E9708: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '2' for queue: 'weblogic.kernel.Default'" (0x3EDC2528)
2LKMONINUSE sys_mon_t:0x3020F198 infl_mon_t: 0x3020E9E0:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9668/302E9670: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '3' for queue: 'weblogic.kernel.Default'" (0x3EDD1EA8)
2LKMONINUSE sys_mon_t:0x3020F248 infl_mon_t: 0x3020EA08:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E95D0/302E95D8: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '4' for queue: 'weblogic.kernel.Default'" (0x3EDD4528)
2LKMONINUSE sys_mon_t:0x3020F2F8 infl_mon_t: 0x3020EA30:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9538/302E9540: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '5' for queue: 'weblogic.kernel.Default'" (0x3EDD98A8)
2LKMONINUSE sys_mon_t:0x3020F3A8 infl_mon_t: 0x3020EA58:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E94A0/302E94A8: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '6' for queue: 'weblogic.kernel.Default'" (0x3EDDCF28)
2LKMONINUSE sys_mon_t:0x3020F458 infl_mon_t: 0x3020EA80:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9408/302E9410: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '7' for queue: 'weblogic.kernel.Default'" (0x3EDE0528)
2LKMONINUSE sys_mon_t:0x3020F508 infl_mon_t: 0x3020EAA8:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9370/302E9378: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '8' for queue: 'weblogic.kernel.Default'" (0x3EDE2BA8)
2LKMONINUSE sys_mon_t:0x3020F5B8 infl_mon_t: 0x3020EAD0:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E92D8/302E92E0: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '9' for queue: 'weblogic.kernel.Default'" (0x3EDE8428)
2LKMONINUSE sys_mon_t:0x3020F668 infl_mon_t: 0x3020EAF8:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9240/302E9248: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '10' for queue: 'weblogic.kernel.Default'" (0x3EDE8A28)
2LKMONINUSE sys_mon_t:0x3020F718 infl_mon_t: 0x3020EB20:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E91A8/302E91B0: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '11' for queue: 'weblogic.kernel.Default'" (0x3EDF5E28)
2LKMONINUSE sys_mon_t:0x3020F7C8 infl_mon_t: 0x3020EB48:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9110/302E9118: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '12' for queue: 'weblogic.kernel.Default'" (0x3EDF94A8)
2LKMONINUSE sys_mon_t:0x3020F878 infl_mon_t: 0x3020EB70:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E9078/302E9080: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '13' for queue: 'weblogic.kernel.Default'" (0x3EDFCAA8)
2LKMONINUSE sys_mon_t:0x3020F928 infl_mon_t: 0x3020EB98:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E8FE0/302E8FE8: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '14' for queue: 'weblogic.kernel.Default'" (0x3EE000A8)
2LKMONINUSE sys_mon_t:0x3020F9D8 infl_mon_t: 0x3020EBC0:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E8F48/302E8F50: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '0' for queue: 'weblogic.kernel.System'" (0x3EE03728)
2LKMONINUSE sys_mon_t:0x3020FA88 infl_mon_t: 0x3020EBE8:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E8EB0/302E8EB8: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '1' for queue: 'weblogic.kernel.System'" (0x3EE06D28)
2LKMONINUSE sys_mon_t:0x3020FB38 infl_mon_t: 0x3020EC10:
3LKMONOBJECT weblogic.kernel.ExecuteThread@302E8E18/302E8E20: <unowned>
3LKNOTIFYQ Waiting to be notified:
3LKWAITNOTIFY "ExecuteThread: '2' for queue: 'weblogic.kernel.System'" (0x3EE0A328)
2LKMONINUSE sys_mon_t:0x3020FBE8 infl_mon_t: 0x3020EC38:
3LKMON -
Defeat denial of service attacks: New feature in WLS 5.1 SP9
Hi all,
SP 9 for WLS 5.1 provides 2 new properties to prevent denial of service attacks
(ISSUE 31269).
The properties are weblogic.httpd.maxPostSize and weblogic.httpd.maxPostTimeSecs.
However I miss more detailed information about the use of the properties, for
example: Aer there default values
whcih are used when I don't set the properties? Is there a geberal recommendation
for values to which the properties could be set?
What is the unit for the properties (bytes or kbytes for maxPostSize)?
Has anybody used the new feature already?
Thanks in advance
Dieter
in WLS 6.0 I believe the default is -1, which means infinite post size and
secs. I don't think there's any recommended values for these. It all depends
on how large your post size may be.
"Dieter Arnold" <[email protected]> wrote in message
news:3afa4fcb$[email protected]..
>
Hi all,
SP 9 for WLS 5.1 provides 2 new properties to prevent denial
of service attacks (ISSUE 31269). The properties are
weblogic.httpd.maxPostSize and
weblogic.httpd.maxPostTimeSecs.
However I miss more detailed information about the use of the
properties, for example: Aer there default values whcih are
used when I don't set the properties? Is there a geberal
recommendation for values to which the properties could be
set? What is the unit for the properties (bytes or kbytes for
maxPostSize)?
Has anybody used the new feature already?
Thanks in advance
Dieter -
Defeat denialof service attack: New feature in WLS 5.1 SP9
Hi all,
SP 9 for WLS 5.1 provides 2 new properties to prevent denial
of service attacks (ISSUE 31269). The properties are
weblogic.httpd.maxPostSize and
weblogic.httpd.maxPostTimeSecs.
However I miss more detailed information about the use of the
properties, for example: Aer there default values whcih are
used when I don't set the properties? Is there a geberal
recommendation for values to which the properties could be
set? What is the unit for the properties (bytes or kbytes for
maxPostSize)?
Has anybody used the new feature already?
Thanks in advance
Dieterin WLS 6.0 I believe the default is -1, which means infinite post size and
secs. I don't think there's any recommended values for these. It all depends
on how large your post size may be.
"Dieter Arnold" <[email protected]> wrote in message
news:3afa4fcb$[email protected]..
>
Hi all,
SP 9 for WLS 5.1 provides 2 new properties to prevent denial
of service attacks (ISSUE 31269). The properties are
weblogic.httpd.maxPostSize and
weblogic.httpd.maxPostTimeSecs.
However I miss more detailed information about the use of the
properties, for example: Aer there default values whcih are
used when I don't set the properties? Is there a geberal
recommendation for values to which the properties could be
set? What is the unit for the properties (bytes or kbytes for
maxPostSize)?
Has anybody used the new feature already?
Thanks in advance
Dieter -
Change request #063743 & WLS 6.1sp3
Change request #063743 in the WLS sp4 resolved JMS issue list says:
"Fixed a problem with Message Driven Beans not acknowledging object messages"
Are there any more details on this? Would this affect any MDB onMessage() operation,
or just those that throw exceptions? Would this affect MapMessages as well as
ObjectMessages? Also, is this related to the negative numbers I see in the "Bytes
Pending" column after my message is processed? What sort of problems do the unacknowledged
messages usually cause for people?
Any thoughts would be much appreciated!
-JT
Actually I think the text on this one is wrong, or at least
misleading. I just read the internal notes on the problem
and it seems that the actual problem was that
topic MDBs were not acknowledging messages if max-beans-in-free-pool
was explicitly set to 1 in the weblogic descriptor, regardless
of message type. Which leads me to guess you could work-around
the problem temporarily by making the topic MDB transactional or
increasing max-beans-in-free-pool higher than 1. Not 100%
sure. Contact customer support to nail it down. (The newsgroups
are not run by customer support - instead they are run by various
volunteers.)
Note that SP4 introduces another problem that breaks
acknowledgement rather than fixes it. You will do best to
go directly to SP5 (do not pass go, do not collect $200). Or
contact customer support for the patch on SP4. I do not
have the change request number for that one.
Tom
Jason Taylor wrote:
> Change request #063743 in the WLS sp4 resolved JMS issue list says:
> "Fixed a problem with Message Driven Beans not acknowledging object messages"
>
> Are there any more details on this? Would this affect any MDB onMessage() operation,
> or just those that throw exceptions? Would this affect MapMessages as well as
> ObjectMessages? Also, is this related to the negative numbers I see in the "Bytes
> Pending" column after my message is processed? What sort of problems do the unacknowledged
> messages usually cause for people?
Messages never get deleted. The JMS server eventually runs out
of memory or or starts to throw quota exceptions.
When the JMS server is rebooted, messages re-appear.
>
> Any thoughts would be much appreciated!
>
> -JT
-
Setting Basic Authentication for Web Service in WLS 6.1
Hi,
I am trying to set-up a Basic Username/Password authentication for a Web Service
that is hosted in WLS 6.1.
How do I go about doing that? Also once I get the username and password, how do
I pass that info
to the SOAP servlet to do the authentication? Can you give me some pointers on
this?
Thanks
MadhuHow do you want to do it? Through use of client.jar for the service or
directly? Here is how I do it directly:
String auth = "guest", pwd = "guest";
URL url = new URL("http://localhost:7001");
URL cmdURL = new URL(url.toString()+"/systemtest/TestWebService");
HttpURLConnection conn = (HttpURLConnection) cmdURL.openConnection();
String encAuth =
new BASE64Encoder().encode((auth + ":" + pwd).getBytes());
// BASE64Encode distributes long strings on multiple
// lines; we don't like that, no siree
int it = 0;
while ((it = encAuth.indexOf('\n')) != -1
|| (it = encAuth.indexOf('\r')) != -1) {
encAuth = encAuth.substring(0, it) +
encAuth.substring(it + 1);
conn.setRequestProperty("Authorization", "Basic " + encAuth);
conn.setRequestProperty("Content-Type", "text/xml");
conn.setRequestProperty("SOAPAction", cmdURL.toString());
conn.setDoOutput(true);
conn.setDoInput(true);
conn.setUseCaches(false);
OutputStream oStr = conn.getOutputStream();
String cmd =
"<?xml version=\"1.0\" ?>\n"
+ "<soap:Envelope xmlns:soap=\"http://schemas.xmls"
+ "oap.org/soap/envelope/\"><soap:Body>"
+ "<ping><arg0>false</arg0></ping>"
+ "</soap:Body></soap:Envelope>";
oStr.write(cmd.getBytes());
oStr.close();
InputStream iStr = conn.getInputStream();
byte[] buffer = new byte[1024];
while (true) {
int size = iStr.read(buffer);
if (size == -1)
break;
System.out.println(new String(buffer, 0, size));
ThorAAge -
VM Crash with WLS 6.1 SP2 JDK 1.3.1 on NT/MSSQL
Has anyone seen this? If we leave the system on for overnight, WLS crashes without
further message. Our setting is 128M, of course it will get out of memory error
if something is asking more than that. Question is:
who is asking for 400 MB in one shot?
P.S. We have internal scheduler threads wake up every 5 minutes to check tasks
thru EJBs.
Exception in thread "CompileThread0" java.lang.OutOfMemoryError: requested 402653192
bytes
goto finish
cd config\informatica
ENDLOCALThanks, you are right. It's a known bug in JDK 1.3.1 01 and it has been fixed in
JDK 1.3.1 02.
<[email protected]> wrote:
That's the CompileThread asking for 402653192 bytes, so it's probably
has
nothing to do with application, WebLogic or 0x18000008. You can look
at
this bug:
http://developer.java.sun.com/developer/bugParade/bugs/4484290.html
or several other bugs very similar to this one.
Cameron Purdy <[email protected]> wrote:
FWIW - that's hex 0x18000008 ... I'd start by looking through yourcode for
the string "18000" and then grep through the WL code for the ConstantPool
equivalent in the .class files.
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Yicheng Tao" <[email protected]> wrote in message
news:3cb48efe$[email protected]..
Has anyone seen this? If we leave the system on for overnight, WLS
crashes
without
further message. Our setting is 128M, of course it will get out of
memory
error
if something is asking more than that. Question is:
who is asking for 400 MB in one shot?
P.S. We have internal scheduler threads wake up every 5 minutes to
check
tasks
thru EJBs.
Exception in thread "CompileThread0" java.lang.OutOfMemoryError: requested402653192
bytes
goto finish
cd config\informatica
ENDLOCAL
Dimitri -
Could not perform unpadding: invalid pad byte.
Hello All
In my config file I have 2 references to connection pool files.. In the files I have the following tag.
<password-encrypted>{3DES}I8OqBHafh35fn6iVd6YXxw==</password-encrypted>
When I try to run my connection pools are not getting initalized and the following error is displayed
Could not perform unpadding: invalid pad byte.
From my limitied knowledge I would just liek to change this to clear text or reencrypt the password. Can anyone help or send a link to an article that would help?
I am running weblogic 9.2
ThanksYou can use the encrypt utility to reencrypt the password.
http://edocs.bea.com/wls/docs90/admin_ref/utils.html#1209592
D Walt wrote:
Hello All
In my config file I have 2 references to connection pool files.. In the files I have the following tag.
<password-encrypted>{3DES}I8OqBHafh35fn6iVd6YXxw==</password-encrypted>
When I try to run my connection pools are not getting initalized and the following error is displayed
Could not perform unpadding: invalid pad byte.
From my limitied knowledge I would just liek to change this to clear text or reencrypt the password. Can anyone help or send a link to an article that would help?
I am running weblogic 9.2
Thanks -
Fail to bind Java Short/Byte type in Oracle Driver in WLS6.1
Hi,
In Oracle, the field is defined as Number(5), but we failed to bind
the Java Short/Byte object to the PreparedStatement in WLS.
WLS 6.1 with SP2.
Any hint here? Or other people can succeed with Oracle's own driver.
I have noticed a post about WLS's Oracle Driver support will be ceded
in the future. Can we still get support on the Oracle Driver from WLS?
Thanks,
Sheng SongWe get this exception thrown from WLS:
java.sql.SQLException: Cannot bind object type: java.lang.Short
at weblogic.jdbc.oci.Statement.setObject(Statement.java:1412)
at weblogic.jdbc.jts.Statement.setObject(Statement.java:952)
at
weblogic.jdbc.rmi.internal.PreparedStatementImpl.setObject(PreparedStatementImpl.java:304)
at
weblogic.jdbc.rmi.SerialPreparedStatement.setObject(SerialPreparedStatement.java:386)
The method is like
pStmt.setObject(1, new Short(2));
Seems like the driver failed to bind Short type correctly to Number
type.
Thanks
Sheng Song
On Thu, 24 Jan 2002 21:11:47 -0800, "Slava Imeshev"
<[email protected]> wrote:
Hi Simon,
Could you show us your code?
Do you get any exceptions?
Regards,
Slava Imeshev
"Simon Song" <[email protected]> wrote in message
news:[email protected]..
Hi,
In Oracle, the field is defined as Number(5), but we failed to bind
the Java Short/Byte object to the PreparedStatement in WLS.
WLS 6.1 with SP2.
Any hint here? Or other people can succeed with Oracle's own driver.
I have noticed a post about WLS's Oracle Driver support will be ceded
in the future. Can we still get support on the Oracle Driver from WLS?
Thanks,
Sheng Song
Maybe you are looking for
-
I'm sure I am missing something basic here, but no amount of searching has yielded a result: I have a SQL Query report for a product with length, width, height column data - two queries. 1. some products don't use these fields (ie they are null), whe
-
Apple TV 3rd Generation can't finish loading libraries
I recently moved my iPhoto & iTunes libraries to a new external hard drive. Both work fine from my iMac (iTunes & iPhoto) but when selecting Computers from my Apple TV, the loading of those libraries never finishes. Any thoughts as to why? It worked
-
Hey there. I'ver just posted my website of my recent trip - done entirely with iWeb. The problem is that a lot of the images are not in their correct spots... Any suggestions? To place the images on the site - I just dragged & dropped them from the m
-
I want to Edit a small Video I took with my camera. I am using Windows 7 with Microsoft 10. Anyway the Video is in a file folder: Libraries, Videos. I open up the touch Smart and then open the videos. There are some Videos already in the files the
-
I am getting a message telling me that my security settings will not allow a download of Adobe Reade
I am getting a message telling me that my security settings will not allow a download of Adobe Reader. I have enabled Java and disabled my anti-virus software but I still get the message. What can I do?