No capacity demands for specified mode

Hi, experts!
During CIFed planned orders ECC to APO, system generated message:
No capacity demands for specified mode
Message no. /SAPAPO/OM_ERROR094
What is the problem?
Thanks!

If the issue happens only when the order quantity is very small, please, check if there is a component that will have its requirements quantity rounded to 0 (e.g. in the PDS, 0,001KG is needed to produce 100KG of the Finished Product. If you create an order for 1KG, the requirements quantity of the component will be rounded to 0) - that cannot happen and may be the cause of the issue.
Edited by: Tiago Furlanetto on Sep 30, 2011 6:54 PM

Similar Messages

Tables for PDS modes and capacity requirements

Does anyone know which tables store the Mode and Capacity Requirement data for SNP PDSs? In particular I am looking for the Mode Duration and Capacity Requirement Bucket Resource Consumption fields.
Thanks,
Laurence.

Thanks Nanda,
I am unable to find this BAPI on our system (we are on SCM 4.1). Do you know the tables that store SNP PDS Mode and Capacity Requirement data?
Regards,
Laurence.

All rows in table do not qualify for specified partition

SQL> Alter Table ABC
2 Exchange Partition P1 With Table XYZ;
Table altered.
SQL> Alter Table ABC
2 Exchange Partition P2 With Table XYZ;
Exchange Partition P2 With Table XYZ
ERROR at line 2:
ORA-14099: all rows in table do not qualify for specified partition
The exchange partition works correct for the first time. However if we try to exchange 2nd partition it gives the error.
How do i solve this error?
How do i find rows which are not qualified for the specified portion. is there a query to find out the same?

stephen.b.fernandes wrote:
Is there another way?First of all, exchange is physical operation. It is not possible to append exchanged data. So solution would be to create archive table as partitioned and use non-partitioned intermediate table for exchange:
SQL> create table FLX_TIME1
2 (
3 ACCOUNT_CODE VARCHAR2(50) not null,
4 POSTING_DATE DATE not null
5 ) partition by range(POSTING_DATE) INTERVAL(NUMTOYMINTERVAL(1, 'MONTH'))
6 ( partition day0 values less than (TO_DATE('01-12-2012', 'DD-MM-YYYY') ) )
7 /
Table created.
SQL> create index FLX_TIME1_N1 on FLX_TIME1 (POSTING_DATE)
2 /
Index created.
SQL> create table FLX_TIME1_ARCHIVE
2 (
3 ACCOUNT_CODE VARCHAR2(50) not null,
4 POSTING_DATE DATE not null
5 ) partition by range(POSTING_DATE) INTERVAL(NUMTOYMINTERVAL(1, 'MONTH'))
6 ( partition day0 values less than (TO_DATE('01-12-2012', 'DD-MM-YYYY') ) )
7 /
Table created.
SQL> create table FLX_TIME2
2 (
3 ACCOUNT_CODE VARCHAR2(50) not null,
4 POSTING_DATE DATE not null
5 )
6 /
Table created.
SQL> Declare
2 days Number;
3 Begin
4 FOR days IN 1..50
5 Loop
6 insert into FLX_TIME1 values (days,sysdate+days);
7 End Loop;
8 commit;
9 END;
10 /
PL/SQL procedure successfully completed.
SQL> set linesize 132
SQL> select partition_name,high_value from user_tab_partitions where table_name='FLX_TIME1';
PARTITION_NAME                 HIGH_VALUE
DAY0                           TO_DATE(' 2012-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')
SYS_P119                       TO_DATE(' 2013-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')
SYS_P120                       TO_DATE(' 2013-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN')
Now we need to echange partition SYS_P119 to FLX_TIME2 and then echange FLX_TIME2 into FLX_TIME1_ARCHIVE:
To exchange it with FLX_TIME2:
SQL> truncate table FLX_TIME2;
Table truncated.
SQL> alter table FLX_TIME1 exchange partition SYS_P119 with table FLX_TIME2;
Table altered.To exchange FLX_TIME2 with FLX_TIME1_ARCHIVE we need to create corresponding partition in FLX_TIME1_ARCHIVE. To do than we use LOCK TABLE PARTITION FOR syntax supplying proper date value HIGH_VALUE - 1 (partition partitioning column is less than HIGH_VALUE so we subtract 1) and then use ALTER TABLE EXCHANGE PARTITION FOR syntax:
SQL> lock table FLX_TIME1_ARCHIVE
2    partition for(TO_DATE(' 2013-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') - 1)
3    in share mode;
Table(s) Locked.
SQL> alter table FLX_TIME1_ARCHIVE exchange partition
2    for(TO_DATE(' 2013-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') - 1)
3    with table FLX_TIME2;
Table altered.
SQL> Same way we exchange partition SYS_P120:
SQL> truncate table FLX_TIME2;
Table truncated.
SQL> alter table FLX_TIME1 exchange partition SYS_P120 with table FLX_TIME2;
Table altered.
SQL> lock table FLX_TIME1_ARCHIVE
2    partition for(TO_DATE(' 2013-01-02 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') - 1)
3    in share mode;
Table(s) Locked.
SQL> alter table FLX_TIME1_ARCHIVE exchange partition
2    for(TO_DATE(' 2013-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN') - 1)
3    with table FLX_TIME2;
Table altered.
SQL> Now:
SQL> select count(*)
2    from FLX_TIME1 partition(day0)
3 /
COUNT(*)
         8
SQL> select count(*)
2    from FLX_TIME1 partition(sys_p119)
3 /
COUNT(*)
         0
SQL> select count(*)
2    from FLX_TIME1 partition(sys_p120)
3 /
COUNT(*)
         0
SQL> select partition_name from user_tab_partitions where table_name='FLX_TIME1_ARCHIVE';
PARTITION_NAME
DAY0
SYS_P121
SYS_P122
SQL> select count(*)
2    from FLX_TIME1_ARCHIVE partition(day0)
3 /
COUNT(*)
         0
SQL> select count(*)
2    from FLX_TIME1_ARCHIVE partition(sys_p121)
3 /
COUNT(*)
        31
SQL> select count(*)
2    from FLX_TIME1_ARCHIVE partition(sys_p122)
3 /
COUNT(*)
        11
SQL> SY.

Constraint capacity planning for Un-Routed items in ASCP

Hi All,
Is there any possibility to create constraint capacity planning for items which do not have routings in ASCP?
I tried by setting Bill of Resources (BOR) in Aggregatin tabbed region in Plan option. But i could not get an expected result. Kindly help me out in this.
regards,
Murlai R
Edited by: user10942922 on Mar 27, 2009 9:30 AM

Dear ,
To answer the question for Capacity requirement planning on sales order I would say that MRP does only materials planning based on demand and reciept but never does Capacity Requirement Plannig .MRP generates Planned Order and susequently , production order can be genreted and farther you can carry out capacity requirement planning based on the work cente available capacity , requirement and load for those MTO orders .
But there are SAP business suit like APO-SNP APO PPDS which carriy our details scheduleing and caapcity check based on the demand situation : Sales Order ,Independent Order and does capcaity vaialbality chek for those demands while planning .
Now , here is the answer of your question :
1) Can Capacities are Scheduled as per priority given in SO automatically. : Not possible through SAP MRP but in APO-PPDS, APO-SNP-CTM , Herustic model .
2) Can revised availability dates will be reflected in SO. : It can be reflected as per the ATP chekc , Replishmenet Lead Time and re-scheduling horizon maintained in OPPQ-Carry all overall plant parametres.
3) Which reports will be useful for understanding consolidated availability date of material for given sales order/s. : You can check through MD04/MD05 or in sales order -Availaibility check -Schedule Line -Availaibility date .
Hope your are clear about the requirememt .
Regards
JH
Edited by: Jiaul Haque on Jun 5, 2010 1:59 PM
Edited by: Jiaul Haque on Jun 5, 2010 1:59 PM

Error. Cannot install public key for specified user

I'm getting "Error. Cannot install public key for specified user" when trying to add a public ssh key for a service processor user on a V20z. I've tried it for different users and still get the error. The same operation works fine on a V40z. Any help would be appreciated.

That would be great if the resolution was that simple. I am using a public key I generated using the putty key generator. Below is the key I would use if I got that far. However I get an error on the "ssh authentication publickey" attribute so I never get the chance to enter a public key. What code version and hardware version are you running that this worked on?
AAAAB3NzaC1yc2EAAAABJQAAAIEA2h00RCKBbpbrTWSe/3TYAvRpkJz7tLwQDCf9
4fDJUWUGrmxXHeomuBhNGZh7tyfFjRL2CKY6nWmFyKN/eDm0PF4IWhhCArzOPVDu
q7Nu2y/pD8wWH8dH4a3zRpkLSekNJtH6lzuqmY0zqz9TnZlpS6g4LI1a+lOGSmhU
/HySw9s=
ciscoasa(config)#username test nopassword privilege 15
ciscoasa(config)#username test attributes
ciscoasa(config-username)#ssh ?
configure mode commands/options:
Hostname or A.B.C.D The IP address of the host and/or network authorized to
 login to the system
X:X:X:X::X/<0-128> IPv6 address/prefix authorized to login to the system
scopy Secure Copy mode
timeout Configure ssh idle timeout
version Specify protocol version to be supported
exec mode commands/options:
disconnect Specify SSH session id to be disconnected after this keyword
ciscoasa(config-username)# ssh
ciscoasa(config-username)# sh ver | in Ver
Cisco Adaptive Security Appliance Software Version 9.1(1)
Device Manager Version 7.1(1)52
ciscoasa(config-username)#

High demand for resources after installing v.8.0.1. Seems more noticeable on news websites.

Running Windows XP on a Dell Optiplex SX280, high demand for resources that I think began after updating to v.8.0.1. Going to firefox safe mode w/add-ons disabled seemed to help initially, but not now. Seems more noticeable on news websites like fox.com. Thanks in advance for any suggestions.

I'm going to back up to Firefox 7 next. I'm getting the drift that 8.0.1 and/or flash on 8.0.1 are unstable.
I'll let you know if that solves this problem.
NOPE. This had no effect.

UI Control options do not appear for TCD mode and Webdynpro mode

Hi guys,
When I open the screen Start option in eCATT for ECC 7.0, there is no options for TCD mode and Webdynpro mode, only have for SAPGUI mode. So pls help to me find the options for these modes.
Thanks in advance,
Thien

Hello Friend,
This has been corrected by 640 SAPKB64023 and 700 SAPKB70016.
Please install the relevant SP to your system.
Thanks.
Eric Monteiro

Changing Capacity Utilization for selected days before and after a CTM Run

I have a number of resources with their respective capacity utilizations. I am running CTM which requires the resource utilizations for all the resources to be at 100%.
Can I do that with 2 capacity variants for the resource with 100% and X% utilization and switch them as and when required. My Problem is that when i create a capacity variant from say date A to date B .. the period between these comes as blocked. Is there a way to correct this.

Request you to go through help documents
http://help.sap.com/saphelp_scm41/helpdata/en/92/a57337e68ac526e10000009b38f889/content.htm
http://help.sap.com/saphelp_scm41/helpdata/en/2e/847337613fbc40e10000009b38f8cf/frameset.htm

How does schedule with RESTful API a Webi report for a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

SAB BO 4.1 SP1
Does it have an RESTful API to schedule a Webi report with the parameter to specify a group of users ("Schedule For" to "Schedule for specified users and user groups" with one or more users/groups)?

Hello Ricardo,
have you try a call like this one ?
 <schedule>
 <name>"test"</name>"
 <format type=\"webi\"/>
 <destination>
 <inbox>
 <to>userId1,userId2,userId3,groupId1,groupId12</to>
 </inbox>
 </destination>
 </schedule>
Regards
Stephane

No table entries found for specified key

Hi All,
I have developed a program to upload data from flat file with the help of GUI UPLOAD. It is succesfully updating data in my Z-table.
Whenever I tried to view the content of table for specific field, message shows No table entries found for specified key. However if I add * as a suffix, it shows the data & when I directly Execute table it also displays the data.
I have also cross checked the spaces before or after the specific content, no space found.
Only two fields are creating this issue Individually (one of them is key field)
Regards
Mukul Maheshwari

Hi Dear ,
Here i had implemented program go through it you can understand easily.
While creating table give one field as primary as you know that.
tables zdata1.
data it_tab type TABLE OF zdata1 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = 'C:\Documents and Settings\E50039\Desktop\data.txt' ***************File path
 HAS_FIELD_SEPARATOR = 'X'
TABLES
 DATA_TAB = it_tab
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_tab.
zdata1-no1 = it_tab-no1.
zdata1-name = it_tab-name.
zdata1-empid = it_tab-empid.
insert zdata1.
ENDLOOP.
Flat file
1 name1 empid1
2 name2 empid2
note: Give the tabspace between values in flat file.
Edited by: Aditya.G on Oct 12, 2011 10:22 AM

Logs for 'Operating mode' change in mirroring

Logs for 'Operating mode' change in mirroring
Hi Everyone,
Is there any log,that shows when the Operating mode of a database involved in mirroring(SQL SERVER 2008 R2) has been changed from asynchronous to synchrous(or vise versa).
Regards,
Aspet
A.G

Try looking into trace log files
DECLARE @filename VARCHAR(100), @filenum int
SELECT @filename = CAST(value AS VARCHAR(100))
FROM fn_trace_getinfo(DEFAULT)
WHERE property = 2
AND traceid = 1
AND value IS NOT NULL
SELECT @filename
SELECT @filename = substring(@filename, 0, charindex('_', @filename)+1) + convert(varchar, (convert(int, substring(left(@filename, len(@filename)-4), charindex('_', @filename)+1, len(@filename)))-4)) + '.trc'
SELECT @filename
SELECT gt.EventClass,
te.Name AS EventName,
gt.TEXTData,
gt.NTUserName,
gt.NTDomainName,
gt.HostName,
gt.ApplicationName,
gt.LoginName,
gt.SPID,
gt.StartTime,
gt.EndTime,
gt.ObjectName,
gt.DatabaseName,
gt.FileName
FROM [fn_trace_gettable](@fileName, DEFAULT) gt
JOIN sys.trace_events te ON gt.EventClass = te.trace_event_id
WHERE EventClass = 116
AND TEXTData LIKE '%Alter
database%'
ORDER BY StartTime;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance

Process demand for third party direct shipment

Hello ,
I need help in below given areas. in our rollout client is given statement of work like this.
1)     Demand transfer to vendors
2)     Reminder processing
3)     Process demand for third party direct shipment
Please can you explain me about these area, how it works with example. it is very benificial for us.
Regards
sapman

Hi Sapera,
There can be 3 typse of trading scenarios
1. 3rd party with Shipping notification : Where in u create sales order and create PO against the PR which si triggered in SAles order adn hen MIGO followed by MIRO and Billing. Here Billing to the end customer can be doen before MIRO because the billign quantity considered is based on the goods Receipt( MIGO) quantity. Many a times you might have your personnels or soem mechanisms to cross verify the delivered quanity as some times the vendor might not dispatch the quantiy in the PO. Here the MIGO doen si consumption posting/Non valuated GR as physically it doenot come into your stock and therefore is not shown in our stock. ITem category used in TAS
2. 3rd party without shiiping notfication ; Here MIGO is not done and billig ncan be done only after MIRO as the billing quantity is based on the Invocie receipt quantity in MIRO
3. Bought in items/ Dealer Sales : Here you bring in the materials from the vendor to our depot plant and then dispatch it to the customer . Here PR is geenrated from sales order followed by PO and MIGO. After MIGO you have to do PGI followed by Billing. MIRO doesnot have any impact on the PGI or Billing. Item category used is TAB
But in all the three instancesthe configurational changes happen in schedule line cateogry and the account assignment which is maintiend in item category and for automatic determination of 2 different schedule line categories we need to maintian 2 different item categories alothough item category settings are almost the same.
Hope this was helpful in giving you some insights on the trading processes
Regards,
Nithin

Demand for Partial Schedule line not showing in MD04?

Hi All,
An SO with around 1200 line items, having problem with one line item, ordered qty is 20. Shipped a partial line of 6qty.Schedule line was showing order qty of 20, confirmed qty 6 but no second schedule line for the balance of 14 and the demand for the open qty 14 is not reflected in MD04. Tried manually and also manually running MRP for the item but neitger created a second line or triggered the demand to show in MD04.
Thanks in Advance.
Thankyou and Regards
Hatti.

Try creating the schedule line in the order and then running MRP for the demand to show in your stock requirements.

Sorry there is currently a high demand for this de...

Hi there,
I have a skype in number, which today is not working and loosing me business. When anyone calls my skype number they get a message "Sorry there is currently a high demand for this destination please try later"
I am getting this at least 2 days a month at the moment.
What is going on? After using Skype for 3 years now, I must say it is bug ridden, and not fit for purpose.
I fully expect to get no support at all if Skype is consistent, go on shock a customer and offer some support.

Idea: I personally provided my Google Voice number (free) which then routes to my Skype number. the benifit has been I can screen my callers, listen/block the caller from the Google Voice web site and it will TRANSCRIBE the message to text and then email it or send it to my phone. I have the Skype voice mail feature turned off.
https://www.google.com/voice
Teach your phone new tricks
Google Voice enhances the existing capabilities of your phone, regardless of which phone or carrier you have - for free. It also gives you:
One Number
Use a single number that rings you anywhere.
Online voicemail
Get transcribed messages delivered to your inbox.
Cheap calls
Free calls & text messages to the U.S. & Canada.
Super low rates everywhere else.

How to keep XML file in memory for specified period ?

How to keep XML file in memory for specified period or forever, I have 5 applications running on WebSphere I wants to use XML file for all the applications. I mean when one apllication is not using XML file still I wants to keep it in memory ...
Thanx in advance ,

Hello,you can create a DocumentManager class,
here is my solution in the past...
you can use static Hashtable save the xml's Document,if one application want get
a appointed Document.first,you can find it from Hashtable,if can't find it ,you
can create it and put into Hashtable,if the words fail to express the meaning,sorry,my english is limited
package com.foresee.xfiles.util;
import java.util.*;
import org.w3c.dom.*;
import org.apache.log4j.*;
import com.foresee.xfiles.common.*;
import com.foresee.xfiles.server.exception.*;
import com.foresee.xfiles.util.*;
* Title: 
* Description: 
* Copyright: Copyright (c) 2002
* Company: 
* @author unascribed
* @version 1.0
public final class DocumentManager {
private static Category m_log = Category.getInstance(DocumentManager.class.getName());
static {
PropertyConfigurator.configure(Configurator.getLCF());
public DocumentManager() {
//synchronized
public static synchronized Document getTransitionDoc(String path) throws SchemaCheckOutException{
Document m_TransitionDoc;
m_TransitionDoc = (Document)TransitionDoc.get(path);
if (m_TransitionDoc == null){
XmlHelper m_xh = new XmlHelper();
try{
m_TransitionDoc = m_xh.getDocument(path);
}catch (SchemaCheckOutException se){
m_log.error("��"+path+"��:"+se.getUserMsg());
throw se;
TransitionDoc.put(path,m_TransitionDoc);
return m_TransitionDoc ;
public static synchronized Document getLogicCheckDoc(String path) throws SchemaCheckOutException{
Document m_LogicCheckDoc;
m_LogicCheckDoc = (Document)LogicCheckDoc.get(path);
if (m_LogicCheckDoc == null){
XmlHelper m_xh = new XmlHelper();
try{
m_LogicCheckDoc = m_xh.getDocument(path);
}catch (SchemaCheckOutException se){
m_log.error("��"+path+"��:"+se.getUserMsg());
throw se;
LogicCheckDoc.put(path,m_LogicCheckDoc);
return m_LogicCheckDoc ;
public static Hashtable TransitionDoc = new Hashtable();
public static Hashtable LogicCheckDoc = new Hashtable();

No capacity demands for specified mode

Similar Messages

Maybe you are looking for