No cubes are reflecting in XIP ,after creation of manual IDOC

Hi Experts,
I am got a mail from client saying that "No cubes are reflecting in XIP ,after creation of manual IDOC"..
Please tell me weather this is issue is related to XI or not if it so, Can you please anybody tell me how to look into this type of issue...
Please help me..
Many thanks in advance..
Regards
Raj

Hi ,
Thank you Sourabh, so I need to get the IDOC basic type from customer and need to check the IDOC using IDX5. Please correct me if I am wrong..
With Warm Regards
Raj

Similar Messages

  • What are the steps follows after creation of holiday calender,......

    Hi Experts....
    I have created Holiday calender for the year 2008 and successfully tranported to production server.What are the further things to be done to get complteness...
    Please advice....
    Regards,
    Sai.

    thats all.
    it is advisable to run RPTUPD00
    Revaluation of Attendance/Absence Records using Batch Input
    The program creates a batch input session for revaluating absence and attendance records. A revaluation can be necessary if work schedule data on which the valuation is based changes after the absence or attendance is entered, for example.
    The relevant absence or attendance records are saved when the batch input session is processed, and the absence or attendance data is revaluated.

  • Cumulative Balances in PCA Balance Sheet cube are not correct.

    Hi
    Could you please help me in sorting out this Issue.
    Cumulative Balances in PCA Balance Sheet cube are not correct.
    After doing a reconciliation my conclusions are:
    Opening balance for 2005 (fiscal period 009.2005) is not in BW
    Opening balance for 2006 (fiscal period 000.2006) is not in BW
    Opening balance for 2008 (fiscal period 000.2008) is not in BW
    Opening balance for 2009 (fiscal period 000.2009) is not in BW.
    With the exception of fiscal year 2007(opening balance is in BW u2013 000.2007) the cumulative balance resets itself at the start of each fiscal year. The attached spreadsheet has an example of the data in BW and screen dumps from R3.
    Please help me how to find Opening balance in BW for PCA
    Thanks
    Bharti

    you need to derive your begining balance based on the fiscal year in your selection. It will be minus 1 year and period 12 for that year.
    pts appreciated.

  • Serial Numbers are not downloading after creation of Delivery in ECC

    Dear all,
    As per client business process, we need to download Serial numbers after creation of Outbound delivery.
    I could see the generated Serial numbers in ECC Delivery document, but those Serial numbers are not downloading into CRM.
    I have already done initial download for SERIALNUMBER object and I could see downloaded serial numbers in COM_TA_R3_ID Table.
    But after creation of Outbound delivery in ECC, those delivered serialnumbers are not available in CRM system, even after successful data transfer of Sales Order, Delivery, PGI and Invoice documents Information.
    Kindly help me in resolving the above issue
    Best regards
    Raghu ram

    Hi
    1.Check in material master whether serial number management is active in Plant data/stor Tab and serial number profile is assigned
    2. Check while doing MIGO once if u enter the material and transfer qty you are getting the serial number tab or not
    3. If everything is ok, then after posting the document check the serial number status in IQ09, check the stock type and the storgae location in the serdata tab
    Regards
    Amuthan M

  • PROD Application servers are reflecting after system refresh in ST03 of QUA

    Hi,
    We recently performed DB refresh activity  from Source: Production to Target: Quality.
    We have 6 application servers excluding our central instance in production system.But after the system refresh,we observed in ST03 that these production application servers are reflecting as nodes on the left hand side in Quality system after refresh.
    Please help us how to delete those application servers in ST03.
    Regards,
    Sudheer.

    I too face the same problem with our quality system after refresh.

  • Purchase order rate change after creation of gr.

    In t- code ME22N PO line item Rate change is possible after creation of GR against that line item.
    We want to restrict the po line item rate change after creation of goods receipt against that line item.
    Please suggest.

    solution 1 : Do not give authorization for ME22
    solution 2 : Grey out price chage , it should only be possible thru info records, and give authorization of info records in secured hands.
    You should not totally restrict price change after GR because there are possibilities that you might require to change rate after goods receipt also. In that case you have to change rate and then have to give restrospective effect to GR.
    try above 2 solutions which are simple

  • How to trigger an SMS after creation of Activity / Interaction Record

    Dear Experts,
    Our Client requirement is to trigger an SMS immediately after creation of an Interaction Record. I want to define an Action for this.
    But what processing type should I use for SMS, (like Method Call, Smart Forms Mail / Fax / Print and Workflow). We are using an external service provider domain to send SMS to our customers. It has been configured in SCOT.
    But from CRM configuration front there is no specific processing type for SMS. then how system reads telephone number from the BP master.
    Kindly help me to resolve the issue, your suggestions will be highly appreciated.
    Best regards
    Raghu ram

    Raghu,
    In your case you could copy a "print" action method class and create a z-version.  Then modify the print action method so that the smartform output triggers a call to your output type.
    Or you could just code a new method that creates a new BCS send request using the CL_BCS document and your output type.
    It just depends on how whether you want to use smartforms to build the message or build it in some other method.
    Take care,
    Stephen

  • Configuration steps involved after creation of new personnel subarea in sap hr module

    Dear Friends,
    Let me know what all config to be done after creation of a new personnel sub area in SAP HR module?
    So that all infotypes including IT0007 & IT0008 are captured for hiring an employee & running the payroll ?
    Reg,
    TD

    Hi Tanuja,
    Normal customization only you have to do for every PA & PSA. if you don't have the steps i will give you the steps.

  • Auto Creation of Delivery with PGI and Billing after creation of Sale Order

    Dear Experts,
    I am having one Req. like...After creation of sales order ..automatic Delivery and Billing should be done.
    Right now i m able to create automatic Delivery but PGI is not happening for that delivery.
    Is there any configuration I have to do ... or by any user exit we can get the solution.
    Can u please provide me solution for this.
    Regards,
    Sanket.

    Hello,
    yes, you can create the PGI Atomatically by BATCH JOB using the program nder the VL23 transaction code.
    Goto the Transaction code SM36 to create a job for the program  SAPMSSY0 which is the program for the AUTO PGI
    create a variant for the Delivery document types and sales organisation combinatioans and add this variant to the bath job created in SM36.
    Set the time of the Job to run after every 5 minutes, so once the job exected it will pcik all the Deliveries which are pending for the PGI.
    After the PGI done you can run SDBILLDL program to create the Billing for all the document which were cleared and due for Billing.
    Hope it is clear for yo, please revert if you need frther clarification .
    santosh

  • Affected tables after creation of a customer

    Hi all,
    Can anybody tells me which tables are affected after creation of a customer in EBS R12.1.3? I wanna know where is stored party_name and tax_reference. I already know about tables:
    HZ_PARTIES and HZ_ORGANIZATION_PROFILES but if they are other - pls let me know...
    Thanks in advance,
    Bahchevanov.

    Dear Bahchevanov.
    These tables are effected while creating customer :
    select * from hz_cust_accounts -- Customer info
    select * from hz_parties      -- Party info
    select * from hz_cust_site_uses_all -- Customer site use info
    select * from hz_cust_acct_sites_all -- Customer Site Acct info
    select * from hz_party_sites      -- Party site info
    select * from hz_locations      -- Customer Site Address
    Regards,
    Ramesh Reddy

  • Workflow is vanishing after creation

    Hi,
    using MDM 5.5 SP6.
    I'm connecting via the rich clients from my desktop pc th the server.
    Visio is installed locally.
    Visio enhancement / plugin is installed.
    I'm just trying to get to know the workflows. So far everything ist fine. Found some nice descriptions and "how-to"s about the topic.
    Nevertheless - the problem I came across today puzzles me now for some hours.
    How come that some of the workflows (in fact most) disappear after creation?
    So what do I do?
    - having a validation rule created
    - adding a new workflow
    - giving name and code and description
    - designing the workflow with viso - refering to the validation rule
    - rule looks like: start - process - validation - approve - stop
    - pressing the save button!
    - closing visio
    - trying to apply the workflow to some records for testing
    - then - the context menu - "add to job" is greyed out - there is no workflow available
    - back to the workflow table - "here it is"
    - pressing the viso button (the trhee dots)
    - visio opens - but empty...
    So what do I do wrong?
    Is the workflow file supposed to be saved at a special place on my hard drive?
    Maybe someone can give a hint...
    Thank you in advance
    Martin

    Hi Martin,
    Your Workflow created in MS Visio is not getting saved correctly thats the reason you are not able to run the workflow.
    - Try creating a very simple workflow say Start->Process->Stop and then check if you are able to execute the workflow.
    - Also make sure you are using the right compatible version of MS Visio ie 2003 with MDM.
    - Also refer the below document to check and see taht you have perform the right settings needed.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90990743-91c0-2a10-fd8f-fad371c7ee40
    http://help.sap.com/saphelp_mdmgds55/helpdata/EN/81/13f2753fa44b2f913cb69379130319/content.htm
    Hope It Helped,
    Thanks & Regards
    Simona Pinto

  • Should folder be closed before changes are reflected

    Hi,
    Am using appendMessages() method on a folder.
        desiredFolder.open(Folder.READ_WRITE);
        int testCnt = drafts.getMessageCount();
        System.out.println("Before appending messages" +testCnt);   
        desiredFolder.appendMessages(msgArr);
        testCnt = drafts.getMessageCount();
        System.out.println("After appending messages" +testCnt);    I retrieve msg. count value before appending messages and after appending messages.
    In Exchange server, the changes are reflected immediately
       Before appending messages 6
       After appending messages    7In hmailserver, the changes are not reflected
        Before appending messages 6
       After appending messages    6What is the best practice? Should I close the folder so that changes are reflected? Is this a mailserver issue or
    javamail issue?

    The IMAP spec doesn't have any requirements about how timely the notification of new messages needs to
    be. You may have to poll for a short time to give the server a chance to process the new messages and
    notify you.
    I would expect that closing and reopening the folder would make it much more likely that the new messages
    would be seen, but I don't know if the IMAP spec guarantees that.

  • Set up purchase requistions "Closed" automatically after creation of PO

    We have following requirement
    Purchase requistions should be "Closed" automatically after creation of Purchase order. Purchase orders are created manually.
    Is there any settings or config to achieve this?
    Thanks in advance

    Hello
    The closed indicator (EBAN-EBAKZ) could only be set manually within the transaction ME52N or when converting the purchase requisition into a PO. via transaction ME21 or ME21N.                                     
    In the case you use transaction ME21 or ME21N to create the PO with reference to purchase requisition the 'closed' flag has to be set manually. In ME21 before you adopt the item, in ME21N the indicator to close the PReq in ME21N is in the delivery schedule tab of the item details at the far right end of the window.                            
    In the change requisition transaction ME52N, set the close indicator.   
    In ME57, while creating a PO with reference to a requisition, set the close indicator on the item selection screen (SAPMM06E, 0125). 
    You are able to create multiple PO's from the same requisition;  however, once the total quantity of the PReq has been assigned to PO's, your quantity of the PReq will be 0.                                  
    In other words, when you go to ME21N or ME21 and you create with reference to a previously fully assigned requisition, you will be prompted to make an entry in the quantity field, as there is  nothing left on the requisition to pull from.  This should be an alert to the user that there are no selectable quantities available for the item.  This prevents double ordering.                                                                               
    If you want to prevent the requisition to be used again, you should set the closed indicator for the item in the requisition.  The closed indicator is never set automatically.  When creating a purchase order in reference to this requisition, you should select the 'open only' flag.  If the closed indicator has been set for the requisition, you will receive a message that no data satisfying selection criteria exist
    Thanks

  • Delegate Calendar Entries disappear seconds after creation

    Environment.
    Exchange 2010 on prem. Office 2013. CEO and COO have the same Executive Assistant. This person has Manage Full Access Permissions for both CEO and COO.
    She regularly adds calendar events to either persons calendar without issue for the past 5 months since she started. Until today. Now, on either calendar, as soon as she creates a Meeting or Appointment, it disappears after 3-10 seconds.
    Ran the repair process on Office. Same issue. Removed the Manage Full from both accounts and added it back. Same issue. Had both CEO and COO manually give her delegate access through Outlook. Same issue.
    Any suggestions would be much appreciated.
    Thanks.

    I was faced with the exact similar problem of my COO sharing her calendar with 2 admin assistants whereby one of them was having issues updating
    the calendar as they would vanish within 20-25 seconds after creation whereas the other assistant was successfully able to do so without any problems even though she was also on cached mode.
    After banging our heads with zillion’s of tests of profile, online mode, offline mode, new profiles, New Laptop, New Configuration, Active Sync
    devices such as Apple, BB, Androids and going through lot of hue and cry on forums, I opened up a call with Microsoft and they pointed me to Exchange 2010 registry entries which eventually did the job. I would only like to summarize my solution which is:
    Refer to
    http://technet.microsoft.com/en-us/library/ff477612(v=exchg.141).aspx
    for default values which will be altered in the solution.
    Event ID 9646 was being logged under my application event
    viewer indicating the following error
    Mapi session “ “ exceeded the maximum of 500 objects of type "objtFolder".
    RESOLUTION:
    To resolve this issue, you simply need to create the following registry keys on each of your mailbox servers.
    Navigate to HKLM > System > CurrentControlSet > Services > MSExchangeIS > ParametersSystem. Create a new key in ParametersSystem
    named MaxObjsPerMapiSession. In MaxObjsPerMapiSession, create a DWORD named
    objtFolder with a decimal value of 600.
    Please note that the DWORD keys should have the same upper and lower case combination therefore copy it from the article above and paste
    in your registry.
    The Information Store will pick up these changes after a few minutes; you do not need to restart the Information Store service. If you continue
    to see this error, only this time specifying that the user has exceeded the new 600 object threshold, increase the value of each DWORD by 100 until the errors stop.
    Similarly, you can see Event ID 9646 indicating other objects also being exceeded as per the above Tech Note and similarly registry entries need
    to be keyed in resolve the issue.
    You will also have to see the user side Sync Issue logs under outlook as they keep indicating various error codes which relate to these problems
    and many more. At times we tend to ignore such logs however are very meaningful.
    Sharing this to minimize a lot of headaches for fellow colleagues who should not suffer the way we did.
    Cheers
    Faisal Khan.

  • EDQP: After creation of Item definition, not able to find the the same item in Standardize items tab.

    Hello Experts,
    This is the first time am creating the item definition in the data lens, after creation of item definition, thought of standardizing it through Standardization Items tab. Not able to find the created item definition in the Item Definition Field LOV.
    Do we need to do any set up to get it available in the Standardization Items tab. For information, I found two things as follows
    1.this item has not assigned to any of sample data records.
    2.Did not find created item definition name in the Item definition field..( It has showing only text as 'Not Item Definition')
    Can any plz help me in creating Item definition completely. After gone through the Knowledge studio ref guide developed to some extent.
    Thanks,
    SSagar.

    Can you put some screenshots of what you did and what you are seeing?

Maybe you are looking for

  • Website from BETA now down and can no longer access files!

    I created two sites while Muse was in Beta.  They are now both down and giving the error message:  NO START PAGE:   Could not display this Web Site as no Start Page has been configured. To configure a default starting page, set one of your Web Pages

  • Using a disk already in use for Time Machine before

    Hi, I was using an external drive less than a week ago with Time Machine (OS X Mavericks). A few days ago, I upgraded to Yosemite, but decided to return to Mavericks not long after. To do that, I had to erase my hard drive, so that now the external d

  • How do I re-install Acrobat X Standard?

    My computer had to be re-installed with Windows. Now I'm in the process of putting all my programs back on. However, when I try to install Adobe Acrobat X Standard, I continually get the following message: "This application cannot be installed on thi

  • Anyone here get very irritated with Verizon customer service? impossible to contact anyone in a higher position?

    I am so irritated that I cannot discuss my phone issues with a manager. I get supervisors that aren't the smartest, Never return their calls, even though I get plenty of promises. also customer service people who make corrections on my account but ne

  • Traffic Light in Dynamic ALV

    Hi All, I created dynamic ALV.I wan to show trafic light color RED,Yellow etc.. If Quantity is less than some 'X' then traffic light should be Red. Please advise how to follow.This is possible in classical but in dynamic alv i need to do. Thank You,